Elektri- ja akutööriistad, tööpingid

• Suitable for dry grinding machines
• Separation of coarse particles in a prechamber
• Filter material made of fine cellulose
• Quick and easy filter change
• Chip container with chassis for easy emptying

• Suitable for dry grinding machines
• Separation of coarse particles in a prechamber
• Filter material made of fine cellulose
• Quick and easy filter change
• Adjustment of the automatic filter cleaning via controls
• Chip container with chassis for easy emptying

• for cutting metal, paper, plastic and other materials
• with miter stop in front
• hardened knife
• Backgauge with scale

MTBS 2550-40 T NC-juhitav giljotiin professionaalseks lehtmetalli lõikamiseks. Töölaius 2550 mm, lõikevõime kuni 4 mm terasel, pneumaatiline lehetoestus, digitaalne tagapiirik, ees- ja tagasuunaline väljastus ning 7,5 kW ajam.

Tehnilised andmed:

• Töölaius: 2550 mm
• Maksimaalne lõikevõime terasel (400 N/mm²): 4,0 mm
• Maksimaalne lõikevõime terasel (450 N/mm²): 4,0 mm
• Maksimaalne lõikevõime roostevabal terasel (700 N/mm²): 2,5 mm
• Lõigete arv minutis: 38
• Lõikenurk: 1,8°
• Tagapiiriku reguleerimisulatus: kuni 750 mm
• Tagapiiriku kiirus: 28 mm/s
• Tagapiiriku mootor: 0,37 kW
• Lõikevahe reguleerimine: 0,05–0,4 mm
• Mootori nimivõimsus: 7,5 kW
• Sisendvõimsus: 8,45 kW
• Koguvõimsus: 9 kW
• Toitepinge: 400 V / 50 Hz
• Õhukulu tsükli kohta: 13 l
• Lehetoestuste arv: 3
• Töölaua mõõdud: 2718 × 530 mm
• Mõõtmed (P × L × K): 3320 × 2360 × 1280 mm
• Netokaal: 3050 kg
• Täht-kolmnurk käivitus: jah

Komplekti sisu:

• MTBS 2550-40 T giljotiin
• NC-juhitav tagapiirik Maper HT071 digitaalnäiduga
• Pneumaatiline lehetoestus
• Esi- ja tagasuunaline materjali väljastussüsteem
• 1000 mm külgpiirik mõõteskaala ja T-soonega
• Kolm lehetoestust T-soontega
• Roostevabast terasest töölauakate koos ülekandekuulidega
• LED-lõikeala valgustus
• Täppisreguleeritav lõikevahe
• Mobiilne jalapedaal koos hädaseiskamisnupuga
• Pidev sõrmekaitsesüsteem
• Roostevaba terase lõikamiseks sobivad kvaliteetsed lõiketerad

• Very heavy and robust welded construction
• Dynamic drive of the bending beam by means of two frequency-controlled motors with gears
• Over cheek clamping via trapezoidal thread
• High-quality Lenze motors
• Continuous sharp bending rail
• Tools suitable for bending stainless steel
• Bending angle adjustment via touchscreen NC control system
• Sheet thickness adjustment manually at the bending beam
• Manual crowning device of the bending beam
• Operation via double foot pedal with emergency stop function
• Clean motor-driven machine without hydraulics
• SH models with segmented, high goat foot tools
• DUO models with continuous sharp-bending rail and high, segmented goat foot tools

• for round bending of square material
• stable construction, fixable to the ground
• Drive the two lower rollers by means of a hand crank
• Rolls hardened and ground
• Steel shafts, hardened and ground
• Delivery via upper roller

• motor design
• horizontal and vertical work possibility
• Powerful 2-stage 400Volt engine
• Left / right rotation by foot pedal

• Powerful and low-noise drive via LENZE gear motors with brake
• Compact, heavy-duty, stress-free welded steel design
• Acute bending rail made of tool steel C50 at the clamping beam
• Continuous, replaceable bed support made of tool steel C50
• Continuous bending rail made of tool steel C50 at the bending beam
• Clamping beam pressure controlled automatically via motor current absorption
• Clamping beam driven via generously dimensioned trapezoidal thread spindles
• Bending angle adjustment PT 1 via potentiometer on the machine’s front side (right)
• Manual granular adjustment of the bending beam with help of a scale
• Manual crowning via pressure screws in the bending beam
• Remote foot switch with emergency stop function
• All moving parts with low-maintenance bearings
• Electrical components by Schneider or Omron
• SH-models with high, segmented crowbar tools
• Stock equipment as standard with: hardened tools, control PT 1, back gauge 6-760mm with hand wheel, measuring device and stop fingers, quick clamping for top tool
• Quality Made in Europe
• Available on request: Models in DUO design featuring full-width acute bending rail and segmented crowbar tools

• Segmented goat foot tool with quick-change system in the upper beam
• Segmented bending bar and bed support
• Backgauge up to 500mm
• Foot quick clamping for workpiece fixation
• Transport rollers with locking brake

• Segmented goat foot tool with quick-change system in the upper beam
• Segmented bending bar and bed support
• Backgauge up to 500mm
• Foot quick clamping for workpiece fixation
• Transport rollers with locking brake

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 400 mm
• Precision flat steel guide attached to the rear of the roller conveyor
• Sturdy, 6-way ball-bearing material stop trolley, easy-moving, manually movable and lockable
• Stopper with reading magnifying glass facilitates reading on the mm scale
• Robust stop arm attached to the stop truck, adjustable to the tool (0 point)
• Quality Made in Germany

Working height up to 1020 mm possible with optional foot plates.

By request:

• Working height from 1020 mm can be extended from the factory
• Also with 500 mm web width

• P version with two pneumatic auxiliary cylinders and foot switch
• Sturdy and robust welded construction
• Suitable for cutting steel and non-ferrous metals
• Foot operation leaves both hands free for material feed
• Large viewing window made of Plexiglas
• High-quality steel blade
• Baffle guide
• Simple adjustment of the cutting blade via eight screws
• Angle-adjustable side stop
• Maximum distance from finger guard to work table is 5 mm, ensuring maximum safety
• Cutting line lighting as standard

• Two-column guided horizontal saw for sawing solid bars and bar profiles
• Siemens S7-1500 control system with wide range of functions and operation via large 7" touch display
• With 2000 mm material transporter as standard -> frequency-controlled feed via circulating spindle and servomotor
• Material library with preset sawing parameters and characteristic curves
• Cutting movement via rotating spindle and servo motor
• With ARP (automatic cutting feed control) -> Automatic saw blade feed depending on the material resistance. Feed speed is constantly adapted to the current cutting load. ARP enables shorter work processes and a longer service life for the saw bands.
• Automatic positioning after entering the desired angle
• Hydraulic clamping of the turntable enables precise angular cutting
• Robust machine body and the smallest possible distances between the saw blade, machine guide and workpiece minimize vibrations for maximum sawing performance
• Infinitely variable cutting speed from 15 - 150 m/min
• Saw blade drive via bevel gearbox, asynchronous motor and frequency converter
• For straight cuts, the material is clamped in front of and behind the cut using a two-part vice
• Pressure adjustment of the hydraulic vice clamping via control valve with pressure gauge
• Saw blade inclination of 7° and hydraulic saw blade tension increase the service life of the saw blade
• Front band guide moves automatically parallel to the movable vice jaw
• chip clearing brush driven via belt roller
• Emulsion cooling with liquid distribution into the saw blade guides and directly into the cutting channel
• Safety light barrier from LEUZE in front of the machine and the material transporter
• More powerful motor optionally available
• Saw blade guides with integrated cooling system

OPTIdrill DM 60V on professionaalne magnetpuurmasin, mis on mõeldud teraskonstruktsioonide, metallitööstuse ja ehitusobjektide puurimistöödeks. Võimas 1,99 kW mootor, tugev elektromagnet ning sujuvalt reguleeritav pöörlemiskiirus tagavad täpse ja usaldusväärse töö. Tänu kompaktsele konstruktsioonile, pehmekäivitusele ja automaatsele määrdesüsteemile sobib seade igapäevaseks kasutamiseks ka nõudlikes tingimustes.

Tehnilised andmed:

• Mootori võimsus: 1,99 kW.
• Toitepinge: 230 V / 50 Hz.
• Pöörlemiskiirus tühikäigul: 100-600 p/min.
• Maksimaalne südamikpuuri läbimõõt: 23 mm.
• Maksimaalne südamikpuurimise sügavus: 40 mm.
• Tööriistakinnitus: Weldon 3/4".
• Magneti hoidmisjõud: 16 kN.
• Magnetaluse mõõtmed: 202 × 102 mm.
• Mõõtmed (P × L × K): 330 × 230 × 490 mm.
• Kaal: 18,3 kg

• Heavy steel welded construction
• Upper and pinch roller driven
• Motorized delivery of the side roller
• Swing-out top roller
• Roller drive via powerful electric motor and gearbox
• Safety device Emergency line
• Mobile control panel

• Swiveling top roller

• Please specify when ordering material to be processed!
• Other models on request

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• Feed / discharge roller conveyor
• Roller conveyor without scale and stop with side guide
• Quality Made in Germany

• Excellent for producing clean visible edges and weld preparation
• For machining steel and aluminum
• Due to adjustable guide rollers on the support table also suitable for deburring of tubes with Ø 150 - 350 mm (optional 300 - 600 mm)
• Setting the chamfer height without tools
• Stepless angle adjustment from 0 - 60 °
• Handy and powerful device
• With two 6-way insert holders
• Feed is done manually
• Included carbide indexable inserts are also suitable for machining stainless steel at reduced speeds - tool life depends on specific operating conditions

OPTIdrill DH 24FT on professionaalne ja vastupidav lauapuurpink automaatse pinoolietteandega, mis sobib metallitöökodadesse, hooldusosakondadesse ja tootmisettevõtetesse. Tugev malmkonstruktsioon, täpne spindel ning parem- ja vasakkäik tagavad täpsed töötlustulemused ja pika kasutusea. Komplekti kuulub masinakruustang BMP 100.

Tehnilised andmed:

• Maks. puurimisvõime terases  24 mm
• Pidev puurimisvõime terases  20 mm
• Mootori võimsus 0,85 kW
• Toitepinge  400 V / 50 Hz
• Kiirusvahemik  350-3000 p/min
• Kiirusastmeid  6
• Pinooli käik  85 mm
• Spindlikoonus  MK2
• Ulatus  164 mm
• Kaal   92 kg

Komplekti kuulub:

• Kiirkinnituspuurpadrun 1-16 mm
• Morse koonus
• T-soonemutrid
• Masinakruustang BMP 100

• Material roller conveyor with stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel (optionally also available with plastic rollers)
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 450 mm
• Length measuring device with handwheel adjustment
• Roller and measuring track with digital LED dimension display in mm, electrical connection 230 V, 50 Hz with power supply unit
• Measuring stop adjustable by handwheel from the workplace, with pneumatic brake for measuring fixation
• Sturdy material stop trolley, 12 ball bearings, movable on large dimensioned guide profile. The stop arm is adjustable and hinged.
• For roller conveyors with a length of more than 5 m, a cable drag chain is used
• Mounting side as desired right or left

Equipment details

position indicator

• 5-digit LED measurement display for constant, millimeter-accurate control of the current position of the stop car
• Position indicator with hollow shaft encoder mounted directly on the drive shaft
• Measuring accuracy / m: ± 0.5 mm

stop arm

• 900 mm long stop arm
• Stop plate adjustable to zero point and manually hinged backwards
• Multiple ball bearings, thus free of play
• Quality Made in Germany

• Robust machine design
• Manual and automatic mode selectable
• Easy tool change through quick change adapter

• Durable construction of tools and tool guides made of high-quality, hardened steel
• Manual operation via two foot pedals for flow and return
• Automatic mode by programming the front and rear travel end points
• Easy to change the die by quick change recording
• Foot pedal with digital display and emergency stop switch

Hydraulic oil not included

• Powerful and quiet drive via LENZE gear motors with brake
• Compact, heavy and stress-free welded steel construction
• Sharp bending rail made of tool steel C50 at the clamping cheek
• Continuous, exchangeable bed support made of tool steel C50
• Continuous bending rail made of tool steel C50 at the bending beam
• Automatic pressure regulation of the clamping cheek via motor current pick-up
• Drive of the clamping cheek via generously dimensioned trapezoidal thread spindles
• Bending angle adjustment PT 1 via potentiometer on the machine front (right)
• Manual fine adjustment of bending beam with scale
• Manual crowning via pressure screws in the bending beam
• Foot remote control with emergency stop function
• All moving parts with low-maintenance bearings
• Electrical components from Schneider or Omron
• SH-models with high, segmented goat's foot tools
• Quality Made in Europe
• Available on request: Models in DUO design with continuous sharp bending rail and segmented goad foot tools, standard tools hardened, sharp bending rail and bending bar hardened, segmented tools and bending bar hardened, segmented goad foot tools and bending bar hardened

• Feed and sanding belt speed infinitely adjustable
• Even deburring, cleaning or polishing of pipes
• Two oppositely running sanding belts on a rotating head, the rotation of the workpiece is eliminated
• Feed unit with rubber rollers ensures safe transport of the workpiece
• Profile is simply tensioned by handwheel in feed unit
• Connecting piece for suction
• Easy sanding belt change
• Foot pedal for controlling the rotary head

• Standard with corrugated round brush (250 x 40 x 24 mm with wire Ø 0.5 mm) for steel processing
• with adjustable prism workpiece support
• large screen to protect against
• Sparks and flying chips
• S version with suction unit with separate motor and filter bag