Elektri- ja akutööriistad, tööpingid

• For sawing hollow profiles and solid materials made of steel, stainless steel, tool steel, non-ferrous metals and plastic
• Wired remote control for starting the machine and lowering the saw arm
• Saw arm tilted by 25°, thus extending the service life of the saw blade
• Saw arm can be tilted from +60° to -45
• Saw blade drive via low-maintenance, oil-lubricated worm gearbox
• Robust three-phase motor equipped with overload protection
• Bearing-mounted turntable
• Chip clearing brush for optimum cleaning and maintenance of the saw blade
• Vice with manual quick-clamping device for the material and quick-clamping device for lateral adjustment of the vice
• Swivel-mounted control panel
• With belt tension monitoring
• Robust band guides with adjustable carbide plates for a precise cut
• Saw blade guides with integrated cooling system

FSM 4080 PRO on professionaalne CNC-juhtimisega täppispinnalihvmasin tasapinna-, süvis- ja ristlihvimiseks. Tugev malmkonstruktsioon, kõrge täpsusega NSK P4 klassi spindlilaagrid ning automaatsed servoajamitega teljed võimaldavad töödelda ka raskeid detaile suure täpsuse ja stabiilsusega.

Tehnilised andmed:

• Magnetlaua mõõtmed: 800 × 400 mm
• Maksimaalne detaili kaal: 400 kg
• Maksimaalne kaugus spindli ja laua vahel: 550 mm
• X-telje käik: 860 mm
• Z-telje käik: 450 mm
• X-telje etteandekiirus: 5–25 m/min
• Spindli jooksutäpsus: 0,002 mm
• Spindli mootori võimsus: 3,75 kW
• Hüdraulikapumba võimsus: 1,5 kW
• Spindli pöörlemiskiirus: 1450 p/min
• Kiiruse reguleerimine: astmeteta (inverterjuhtimine)
• Lihvketta mõõtmed: Ø 405 × 50 × 127 mm
• Koguvõimsus: 8 kW
• Toitepinge: 400 V / 50 Hz
• Juhtsüsteem: 10" puutetundlik NC-juhtimine G1 (Y- ja Z-telg)
• Masina mõõtmed (P × L × K): 3600 × 2650 × 2560 mm
• Kaal: 3700 kg

ULMS 600 on professionaalne alusraami sisse ehitatud ketassaag alumiiniumi, värviliste metallide ja suuremõõtmeliste profiilide täpseks lõikamiseks. 600 mm saeketas tagab suure lõikevõime ning kõrge tootlikkuse.

Tehnilised andmed:

• Tüüp: alusraami sisse ehitatud kergmetallide ketassaag
• Kasutusala: alumiinium, värvilised metallid ja profiilmaterjalid
• Saeketta läbimõõt: 600 mm
• Paigaldusviis: tööpinna alla integreeritud
• Sobib suuremõõtmeliste profiilide töötlemiseks
• Sobib tööstuslikuks ja seeriatootmise kasutuseks
• Tugev tööstuslik konstruktsioon
• Professionaalseks kasutamiseks

Komplekti sisu:

• Metallkraft ULMS 600 kergmetallide ketassaag
• Materjali tugisüsteem
• Kaitsekate
• Kasutustööriistad
• Kasutusjuhend

• Heavy industrial version
• Quiet running
• Manual or semi-automatic operation
• Steplessly adjustable saw blade speed from 20-80 m/min
• High cutting accuracy due to vibration-free running
• Mitration adjustment -45° to 60° by swivelling the entire saw bow
• Standard with high quality bi-metall saw band
• Microswitch for automatic limit switch
• Coolant pump
• Ball bearing saw band guide with carbide plates for optimum cutting results
• Easy adjustment of the lowering speed by means of feed control valve in the control panel
• Large dimensioned, hydraulic quick-clamping vice, self-closing, laterally adjustable
• Manometer for correct saw blade tension
• Clear control panel

• closing the vice and activating the motor
• lowering the saw bow for cutting
• stopping the motor and returning the saw bow to the starting position

• Powerful motor and vibration-free operation for the best sanding results
• Continuous face sanding surface thanks to removable attachments enables sanding of even long workpieces
• With two belt speeds
• Quick clamping system enables fast sanding belt changes
• Integrated extraction system in the base with polyester filter pockets
• One extraction nozzle each directly on the spark box and on the rear belt roller
• Can be used with and without suction
• Easy adjustment of the belt run via adjusting screw on the front contact roller
• Automatic retensioning of the sanding belt thanks to spring-loaded belt tensioning system
• Infinitely tiltable sanding unit
• Fold-away protective screen

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 260 mm
• With length measuring device
• Roller and measuring track with mm-scale, manual measuring system with C-guide profile and sliding flap stop
• Quality Made in Germany

• For use in the metalworking industry for grinding, structuring and polishing tasks, especially in the stainless steel sector
• 225 mm balanced belt rollers ensure optimum and low-vibration drive
• Infinitely variable belt speed of 4.5 - 27 m/s thanks to frequency shaper
• With electric table height adjustment
• With split table that can be opened, drawer sanding unit and integrated work table lighting
• Smooth-running sanding table even under load
• Easy adjustment of the sanding belt
• Profile roller sanding pad, resulting in less tarnishing during the sanding process
• Right/left rotation as standard

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 260 mm
• With length measuring device
• Roller and measuring track with mm-scale, manual measuring system with C-guide profile and sliding flap stop
• Quality Made in Germany

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• Feed / discharge roller conveyor
• Roller conveyor without scale and stop with side guide
• Quality Made in Germany

• heavy welded steel construction
• horizontal and vertical work possibility
• lower rollers driven by a motor
• Rolls are hardened
• Steel shafts, hardened and ground
• Delivery via upper roller
• lateral straightening rollers, infinitely adjustable
• powerful 400 volt engine
• Left / right rotation by foot pedal

• Best power transmission through aluminum pulleys
• Emergency stop impact switch
• Drill spindle with precision ball bearings
• Guaranteed concentricity accuracy less than 0.03 mm measured at the drilling spindle
• Dirt and water resistant, easy to clean membrane keyboard with high-contrast OLED display
• Glare-free LED lighting integrated on the left and right in the drill head. No disturbing shadows
• Threading mode
• Language selection in the display field optionally DE-EN-FR-RU
• Digital reference point
• Digital parts counter
• Acoustic signal when reaching the drilling depth
• Reduced speed in tapping mode
• Height-adjustable feed guard with microswitch for maximum protection
• Precision machined drill table with parallel T-slots, precision surface finish
• Turnable drill table
• Solid base plate with parallel T-slots

When drilling and tapping, the machine automatically sets the optimal speed for the tool, after specifying the diameter and material.

• Siemens SINAMICS V20 inverter

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• Feed / discharge roller conveyor
• Roller conveyor without scale and stop with side guide
• Quality Made in Germany

• Saw head swivelby by 45° to the left and right
• Stable and robust construction
• Precise cut
• Turntable and saw shaft mounted on bearings
• Quick-release screw sticks with plastic-equipped aluminium clamping jaws
• Easy and hassle-free operation
• Saw head for chiverge cut by 45° to the left tiltable
• Two pneumatic vices
• Control handle with safety switch

• Sliding upper beam with adjustable flat guides
• Manual backgauge with 550 mm travel range
• Solid 90° side fence with 1000 mm length, T-slot, tilting cam and scale
• LED cutting line lighting and slotted holes in the top cover for an optimum view of the cutting edge for cutting on tear
• High-quality, rotatable knives suitable for cutting stainless steel Heavy-duty hold-down beam with material-friendly polyurethane inserts suitable for cutting stainless steel
• Heavy-duty hold-down bar with material-friendly polyurethane inserts
• Rear area protected by light barrier
• Operation via mobile foot pedal console with emergency stop

• With foot control
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp-bending rail
• Seriesßig with manual adjustment of the bending angle
• Especially low-maintenance
• Clamping of the workpiece is motor-driven
• SH models with high, segmented cast base tools
• DUO models with continuous sharp-bending rail and high, segmented goat foot tools

• Standard tools hardened
• Sharp bending bar and bending bar hardened
• Segmented tools and bending bar hardened
• Segmented cast foot tools and bending bar hardened

• Smooth and powerful industrial electric motor
• Separate emergency stop impact switch
• Stable casting column
• Measurement scale for drilling depth
• Precisely machined drill table with diagonal T-slots and circumferential cooling water channel
• Drilling table 360 ​​° rotatable
• V-belt cover with safety switch
• V-belt quick-clamping device
• Long, ergonomic cast aluminum sleeve lever cast in one piece (B 16H / B 24H with softgrip handles)
• Massive, large base plate with grooves, strongly ribbed on the back
• By swinging away the drilling table, base plate can be used as a work surface for particularly high workpieces
• Guaranteed concentricity measured better than 0.015 mm in the drill quill
• Drill spindle with precision ball bearings
• High-quality OPTIMUM keyless chuck in the standard scope of delivery
• Large, height-adjustable protective screen with safety switch

• machine light

• Forward / reverse operation

MKS 316 R on professionaalne manuaalne metalliketassaag kahe madala lõikekiirusega, mis sobib eriti hästi roostevaba terase töötlemiseks. Varustatud jahutussüsteemi, 45° pööratava saepea ja reguleeritava hõõrdsiduriga. 

Tehnilised andmed:

• Toitepinge: 400 V
• Võrgusagedus: 50 Hz
• Mootori võimsus: 1,32 / 1,91 kW
• Lõikekiirused: 20 / 40 p/min
• Saeketta läbimõõt: 315 mm
• Lõikenurk: -45° kuni +45°
• Saepea pööratav 45° vasakule ja 45° paremale
• Kiirkinnituskruustangid pööratavad 45° vasakule ja paremale
• Antigraat-seadmega kiirkinnituskruustangid
• Pikisuunas nihutatav kruustang piki- ja pilulõigete tegemiseks
• Reguleeritav hõõrdsidur saeketta kaitsmiseks
• Õlivannis töötav reduktor
• Automaatne membraanpump jahutusvedelikule
• Standardne jahutusvedeliku filter
• Liigutatav kaitsekate
• Juhtsüsteem madalpingel 24 V
• Avariiseiskamislüliti
• Pealüliti
• Kiirusevalik
• Ülekoormuskaitse
• Mõõdud (P × L × K): 1475 × 1000 × 1150 mm
• Netokaal: 170 kg
• Brutokaal: 193 kg

Eriti sobiv roostevaba terase töötlemiseks tänu madalatele lõikekiirustele 

Lõikevõime:

• Ümartäismaterjal 0°: 65 mm
• Ümartoru 0°: 90 mm
• Nelikanttoru 0°: 5 × 85 mm
• Ristküliktoru 0°: 120 × 70 mm
• Ümartäismaterjal -45°: 60 mm
• Ümartoru -45°: 80 mm
• Nelikanttoru -45°: 70 × 70 mm
• Ristküliktoru -45°: 70 × 70 mm
• Ümartäismaterjal +45°: 60 mm
• Ümartoru +45°: 80 mm
• Nelikanttoru +45°: 70 × 70 mm
• Ristküliktoru +45°: 80 × 70 mm 

Komplekti sisu:

• Metallketassaag Metallkraft MKS 316 R
• Jahutusseade koos filtrga
• Materjalitugi rullikuga
• Pikkusepiirik 500 mm
• Kasutustööriistad

• Saeketas ei kuulu komplekti
• Alusraam ei kuulu komplekti

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• Feed / discharge roller conveyor
• Roller conveyor without scale and stop with side guide
• Quality Made in Germany

• Heavy and stable welded construction
• Punching table with scale and stops
• Extra large projection with 625 mm
• Time-saving, stepless stroke adjustment
• With a powerful engine
• Stepless adjustment of the stroke
• Punching saddle with second holder for machining UPN profiles
• Stamps and dies no. 1, no. 2, no. 3, no. 30, no. 45, no. 60 can be used with the standard delivery scope of the machine. Use of punch and die no. 4 and no. 80 optional

• Please specify when ordering material to be edited!

BSS 1250 E käsigiljotiin professionaalseks lehtmetalli lõikamiseks. Töölaius 1250 mm, lõikevõime kuni 1,5 mm, tugev malmkonstruktsioon, reguleeritav külgpiirik ja suur töölaud täpseks ning efektiivseks tööks.

Tehnilised andmed:

• Töölaius: 1250 mm
• Maksimaalne lõikevõime terasel (400 N/mm²): 1,5 mm
• Tagapiiriku reguleerimisulatus: kuni 550 mm
• Töölaua mõõtmed: 600 × 1530 mm
• Töölaua kõrgus: 750 mm
• Mõõtmed (P × L × K): 2450 × 1000 × 1820 mm
• Netokaal: 480 kg
• Konstruktsioon: raske malmkonstruktsioon
• Juhtimine: käsitsi

Komplekti sisu:

• BSS 1250 E käsigiljotiin
• Standardne survetala
• Eemaldatav nurgapiirik töölaul
• Käsivändaga reguleeritav külgpiirik
• Integreeritud suur malmist töölaud