Elektri- ja akutööriistad, tööpingid

• Suitable for wet grinding machines
• Filter area visible through transparent plastic windows

• Suitable for wet grinding machines
• Filter area visible through transparent plastic windows

• For deburring flat components e.g. after laser cutting or punching
• Large working width with up to 1350 mm
• Conveyor table with profile conveyor belt for optimum hold during processing

• For deburring flat components e.g. after laser cutting or punching
• Large working width with up to 1350 mm
• Conveyor table with profile foconveyor belt for optimum hold during processing
• NC control with 8" touch screen

• For producing all round shaped parts such as pipes, cylinders, etc.
• Roller drive via hand crank or motorized on E models
• Heavy and stable cast iron construction
• Asymmetric 3-roll system for easy pre-bending
• The upper roller is adjustable, thus easy removal of the finished workpiece
• Swiveling top roller
• Easily adjustable upper and lower roller
• Possibility of conical bending
• With safety devices
• Standard wire insert groove on bottom and back roller
• The foot control leaves both hands free for the material supply

DS 300 professionaalne kahepoolne käiakpink metalli töötlemiseks ja tööriistade teritamiseks. Tugev konstruktsioon, stabiilne töö ning täpsed lihvimistulemused töökodadele ja tootmisettevõtetele.

Komplekti sisu:

• Käiakpink DS 300
• 2 lihvketast
• Reguleeritavad töötoed
• Silma- ja sädemekaitsed
• Kasutusjuhend

Tehnilised andmed:

• Maksimaalne töölaius: 2000 mm
• Maksimaalne painutusvõime terasel (400 N/mm²): 1,0 mm
• Mõõdud (P × L × K): 2500 × 660 × 1000 mm
• Netokaal: 244 kg
• Brutokaal: 309 kg
• Kerge konstruktsiooniga mobiilne painutuspink alusraamil
• Sobib katuseplekkseppadele ja plekitööde paigaldajatele neeluplekkide, korstnakatete ja muude profiildetailide valmistamiseks
• Varustatud transpordirataste ja seisupiduriga
• Lihtne ja jäik konstruktsioon tagab täpse töö
• Materjalisõbralik ja ohutu töörežiim
• Detaili kindel kinnitamine hoova abil
• Painutamine toimub kaarhoova abil

• NC control for setting the bending angle and the correction
• counter for high repeatability
• Mobile control panel with controls and pedals
• Fast tool change

• Powerful motor with inverter and reduction gear produces high torque
• NC control for setting the bending angle and the correction
• counter for high repeatability
• Mobile control panel with controls and pedals
• Fast tool change
• All shafts hardened and ground
• Material clamping is done manually
• Very good price / performance ratio

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• High quality steel knives with a hardness of HRC55-60
• Equipped with two control handles
• Front bearing surface with scale
• Up to 500 mm adjustable backgauge

• Motorised height adjustment of the work table
• Conveyor table with profile conveyor belt for optimum stability during transportduring processing
• NC control with 8" touch screen

Tehnilised andmed:

• Mootori võimsus: 1,2 kW.
• Toitepinge: 230 V / 50 Hz.
• Pöörlemiskiirus: 1000–2400 p/min, sujuvalt reguleeritav.
• Tööriista läbimõõt max: 105 mm.
• Tööriista laius: 50–100 mm.
• Lihvimislaius max: 100 mm.
• Võlli läbimõõt: 19 mm.
• Netokaal: 4,8 kg

Komplekti kuulub:

• Plastkohver.
• Kummist õhkrull.
• Õhupump kummirulli täitmiseks.
• Jäme viimistlusfliis-rull Ø 90 × 100 mm.
• Lihvhülss K60, mõõtudega 100 × 292 mm.
• Lihvhülss K100, mõõtudega 100 × 292 mm.
• Lihvhülss K180, mõõtudega 100 × 292 mm.
• Lihvlintide veorull.
• Takjakinnitusega viimistlusfliis 40 × 60 mm.
• Takjakinnitusega lihvlint K120, mõõtudega 40 × 600 mm.
• Takjakinnitusega veolint 30 × 700 mm.
• Peen viimistlusfliis-rull 105 × 100 × 19 mm.
• 10-osaline vaherõngaste komplekt 40 × 19 × 5 mm

• Smooth and powerful industrial electric motor
• Separate emergency stop impact switch
• Stable casting column
• Measurement scale for drilling depth
• Precisely machined drill table with diagonal T-slots and circumferential cooling water channel
• Drilling table 360 ​​° rotatable
• V-belt cover with safety switch
• V-belt quick-clamping device
• Long, ergonomic cast aluminum sleeve lever cast in one piece (B 16H / B 24H with softgrip handles)
• Massive, large base plate with grooves, strongly ribbed on the back
• By swinging away the drilling table, base plate can be used as a work surface for particularly high workpieces
• Guaranteed concentricity measured better than 0.015 mm in the drill quill
• Drill spindle with precision ball bearings
• High-quality OPTIMUM keyless chuck in the standard scope of delivery
• Large, height-adjustable protective screen with safety switch

• Smooth running thanks to ground multi-tooth driver
• Best power transmission through aluminum pulleys in conjunction with toothed GATES quality V-belt

• Two-column guided horizontal saw for sawing solid bars and bar profiles
• Mitsubishi FX 5 control system with simple operation via 7" touchscreen
• With 2000 mm material transporter as standard -> frequency-controlled feed via circulating spindle
• Cutting movement via hydraulic cylinder
• With BRP (cutting feed control) -> if a set ampere limit is exceeded, the feed movement is stopped while the saw blade continues to run in order to convey chips out of the cutting channel. Once the normal load is reached, the sawing process continues
• Automatic positioning after entering the desired angle
• Hydraulic clamping of the turntable enables precise angular cutting
• Robust machine body and the smallest possible distances between the saw blade, machine guide and workpiece minimize vibrations for maximum sawing performance
• Infinitely variable cutting speed from 15 - 150 m/min
• Saw blade drive via bevel gearbox, asynchronous motor and frequency converter
• For straight cuts, the material is clamped in front of and behind the cut using a two-part vice
• Pressure adjustment of the hydraulic vice clamping via control valve with pressure gauge
• Saw blade inclination of 7° and hydraulic saw blade tension increase the service life of the saw blade
• Front band guide moves automatically parallel to the movable vice jaw
• chip clearing brush driven via belt roller
• Emulsion cooling with liquid distribution into the saw blade guides and directly into the cutting channel
• Safety light barrier from LEUZE in front of the machine and the material transporter
• More powerful motor optionally available
• Saw blade guides with integrated cooling system

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• Feed / discharge roller conveyor
• Roller conveyor without scale and stop with side guide
• Quality Made in Germany

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 400 mm
• Precision flat steel guide attached to the back of the roller conveyor
• Sturdy, 6-way ball-bearing material stop trolley, easy-moving, manually movable and lockable
• Robust stop arm attached to the stop truck, adjustable to the tool (0 point)
• With length measuring device and digital dimensioning system
• Roller and measuring track with battery-operated LCD display and magnetic tape measuring system
• Quality Made in Germany

Please specify when ordering mounting side and height!

Working height up to 1020 mm possible with optional foot plates.

By request:

• Working height from 1020 mm can be extended from the factory
• Also with 500 mm web width

• Swivel range of ± 45 °
• Easy-to-read angle scale enables precise work
• Seconds adjustment of the miter
• Protected vise spindle
• Massive machine base on both sides with holes for the mounting of the material stand MSR
• Long handle allows sawing without great effort with integrated push-button (on / off)
• Automatic switching on of the coolant pump when sawing
• Functional protection device, closed construction, movable
• Fast opening mechanism for optimum safety when cutting
• Centrally exciting vise, 4-fold guided with individually adjustable clamping jaws. Cutting always takes place in optimal position to the workpiece
• Massive machine base
• Protected vise spindle
• Machine base sizes:
  - CS 275 - 460 x 515 x 775 mm and
  - CS 315 - 546 x 620 x 801 mm
• The saw is delivered without circular saw blade (saw blade division freely selectable)

• Heavy welded steel construction
• top and clamping roller driven
• Swing-out top roller
• Manual adjustment of the clamping and side roller
• Roller drive via powerful electric motor and gearbox
• Wire grooves on the clamping roller
• Safety device emergency stop line
• With mobile control panel and foot pedal
• Note: Please specify the type of material to be processed when ordering!
• Note: Other models on request

• Swing-out top roller
• Control panel with digital display and manual operation (optional)
• RBM 2050-30 E PRO with optional motorized infeed of the side roller and digital display for side roller

MKS 351 metallilõike ketassaag koos alusraami ja HSS-saekettaga. Kahe kiirusega 350 mm ketassaag, pööratav lõikenurk ±45°, 400 V toide ning täpne ja puhas lõige terase ning roostevaba terase töötlemiseks.

Tehnilised andmed:

• Toitepinge: 400 V / 50 Hz
• Mootori võimsus: 1,5 / 2,2 kW
• Saeketta läbimõõt: 350 mm
• Saeketta kiirused: 20 / 40 p/min
• Lõikenurga reguleerimine: -45° kuni +45°
• Jahutussüsteem: membraanpump filtriga
• Mõõtmed (P × L × K): 1000 × 1200 × 1475 mm
• Kaal: umbes 210 kg

Lõikevõime 0°

• Täismaterjal ümar: Ø60 mm
• Toru ümar: Ø110 mm
• Nelikanttoru: 100 × 100 mm
• Ristküliktoru: 120 × 80 mm

Lõikevõime ±45°

• Täismaterjal ümar: Ø55 mm
• Toru ümar: Ø80 mm
• Nelikanttoru: 80 × 80 mm
• Ristküliktoru: 80 × 80 mm

Komplekti sisu:

• MKS 351 metallilõike ketassaag
• Alusraam (substructure)
• HSS-E saeketas Ø350 × 2,5 × 32 mm
• Jahutussüsteem
• Pikkuspiirik 500 mm
• Kasutustööriistad ja dokumentatsioon

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 400 mm
• Precision flat steel guide attached to the back of the roller conveyor
• Sturdy, 6-way ball-bearing material stop trolley, easy-moving, manually movable and lockable
• Robust stop arm attached to the stop truck, adjustable to the tool (0 point)
• With length measuring device and digital dimensioning system
• Roller and measuring track with battery-operated LCD display and magnetic tape measuring system
• Quality Made in Germany

Please specify when ordering mounting side and height!

Working height up to 1020 mm possible with optional foot plates.

By request:

• Working height from 1020 mm can be extended from the factory
• Also with 500 mm web width

• Punching station, flat steel shears, angle steel shears, sectional steel shears, available with notching station starting from HPS 45S
• DS series with two working cylinders and two foot pedals for simultaneous use with punching station and sectional steel shears
• Stepless adjustment of the stroke
• Larger reach for punching station with 620 mm optional, available from HPS 55DS
• Heavy and rigid welded construction
• Standard with notching knife starting from HPS 45S
• With powerful 400 Volt motor
• V-notching knife, oversized punching device and larger throat depth for punching station available on request
• Two-stage foot pedal for inching operation
• Stamps and dies No. 1, No. 2, No. 3, No. 30, No. 45, No. 60 can be used with the standard delivery scope of the machine. Use of punch and die No. 4 and No. 80 optional (except HPS 40S)

Advantages of punching over drilling:

• High time savings - cycle times
• No chips
• No cooling

Note:

• All hydraulic sectional shears are delivered with oil

• Foot control allows sheet positioning with both hands
• Workpiece clamping and bending are motorized via a chain drive
• Setting the bending angle manually, reading the angle on a scale ring
• Many bending options with segmented upper beam
• Accurate movement of the bending beam over large-dimensioned flat guides
• Heavy, robust welded construction