GRAPHITE elektritööriistad ja käsitööriistad Hammerjackis
Hammerjack on GRAPHITE toodete ametlik maaletooja. GRAPHITE on Euroopa tööriistabränd, mis pakub kvaliteetseid elektritööriistu, akutööriistu ja käsitööriistu ehitus-, remondi- ja paigaldustöödeks. Bränd keskendub töökindlatele lahendustele, mis ühendavad vastupidavuse, kasutusmugavuse ja suurepärase hinna ning kvaliteedi suhte.
Hammerjacki GRAPHITE valikust leiad akutrellid, lööktrellid, nurklihvijad, tikksaed, ketassaed, lihvijad, multifunktsionaalsed tööriistad, käsitööriistad ning laia valiku tarvikuid erinevateks ehitus- ja remonditöödeks.
Tööriistad nõudlikule kasutajale
GRAPHITE tööriistad on loodud pakkuma usaldusväärset jõudlust ja pikka kasutusiga. Kaasaegsed tehnilised lahendused, vastupidavad materjalid ja ergonoomiline disain aitavad saavutada täpseid tulemusi puidu, metalli, betooni ning teiste materjalide töötlemisel.
Miks valida GRAPHITE?
GRAPHITE toodete ametlik maaletooja.
Kvaliteetsed elektri- ja akutööriistad.
Lai valik käsitööriistu ja tarvikuid.
Vastupidavad ning ergonoomilised lahendused.
Suurepärane hinna ja kvaliteedi suhe.
Usaldusväärsed tööriistad igaks projektiks
GRAPHITE pakub töökindlaid lahendusi ehitajatele, paigaldajatele, hooldustehnikutele ja nõudlikele kodukasutajatele. Hammerjackist leiad laia valiku GRAPHITE originaaltooteid erinevateks ehitus-, remondi- ja paigaldustöödeks.
GRAPHITE metal drill with 5.0 mm diameter is made of high quality alloy of high speed steel. 124° point angle and chisel edge correction allow for easy drilling without punching. Designed for fast and efficient drilling in steel workpieces.
GRAPHITE metal drill with 7.0 mm diameter is made of high quality alloy of high speed steel. 124° point angle and chisel edge correction allow for easy drilling without punching. Designed for fast and efficient drilling in steel workpieces.
Metal drills GRAPHITE (ref. no. 57H054-5) with diameters 10.0 mm are made of high quality M35 HSS alloy with 5% cobalt additive. 135° point angle and chisel edge correction allow for easy drilling without punching. Thanks to alloy resistance to high temperature, the drills are perfect for drilling holes in hardly machinable materials, like stainless steel, acid resistant steel, heat resistant steel etc.
GRAPHITE bimetal hole cutter with progressive teeth made of high speed steel allows for efficient cutting of precise holes in steel, stainless steel, wood, plastics and composite materials.
GRAPHITE metal drill with 8.5 mm diameter is made of high quality alloy of high speed steel. 124° point angle and chisel edge correction allow for easy drilling without punching. Designed for fast and efficient drilling in steel workpieces.
Pro-Tec HSS-CNC metallipuur läbimõõduga 10,0 mm on kvaliteetne tööriist täpseks ja efektiivseks puurimiseks metallidesse ning plastmaterjalidesse. Puur on valmistatud vastupidavast HSS kiirlõiketerasest ning selle 124° tipugeomeetria tagab sujuva puurimise alguse, täpse tsentreerimise ja stabiilse juhtimise.
Puur sobib kasutamiseks erinevates materjalides, nagu teras, malm, alumiinium, vask, messing ja plastid. Tänu kvaliteetsele töötlusele pakub see head kulumiskindlust ning pikka kasutusiga ka intensiivsel kasutamisel.
Toote omadused:
Läbimõõt: 10,0 mm
Tüüp: HSS-CNC metallipuur
Seeria: Pro-Tec
Tipunurk: 124°
Täpne ja stabiilne puurimine
Hea kulumiskindlus ja töökindlus
Sobib professionaalseks ja igapäevaseks kasutamiseks
GRAPHITE sabre saw blades have teeth of high speed steel. Combination of high speed steel with chromium vanadium steel allows to use the blades for cutting of all pieces made of steel, stainless steel, plastic and wood. Combination of these two steel types guarantees unique blade flexibility, which allows to work with bent blade. Therefore, it is possible to make cuts in hard to reach areas.
Water abrasive paper GRAPHITE (ref. no. 55H907) in a sheet with dimensions 230 x 280 mm and granulation 1000. Designed mainly for wet varnish and plastic grinding applications in automotive industry as well as wood and metal processing. The abrasive paper’s backing is a very flexible latex paper which perfectly adapts to the workpiece. Close coating (100% of the paper surface is covered with abrasive grain) guarantees increased durability and processing accuracy. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
Pro-Tec HSS-CNC metallipuur läbimõõduga 10,5 mm on kvaliteetne ja vastupidav puur täpseks puurimiseks metallidesse ning plastmaterjalidesse. Tänu 124° tipugeomeetriale tagab puur täpse tsentreerimise, sujuva puurimise alguse ja stabiilse juhtimise kogu tööprotsessi vältel.
Puur sobib professionaalseks kasutamiseks töökojas, tööstuses ja ehitusel ning on mõeldud erinevate metallide ja plastide töötlemiseks. Kvaliteetne HSS-teras tagab hea kulumiskindluse ning pika kasutusea ka intensiivsel kasutamisel.
Masonry drill GRAPHITE (ref no. 57H578) with SDS+ shank, diam 8.0 mm and crossed tip with fine grit sintered carbide allows to efficiently drill holes in concrete. Double S4 flute ensures proper drillings extraction and protects the drill against overheating.
Delta sanding paper GRAPHITE (ref. no. 55H766), size 93 x 93 mm and granulation K100. Dedicated to grinding wood, wood-based materials, metals and plastics. Hook and loop fastener allows for quick replacement of worn out paper. Holes allow for nearly dust-free operation with tools equipped with dust extraction system. Product with E-paper backing designed for mechanical grinding. The paper’s semi-open coating (80-90% of the paper surface is covered with abrasive grain (aluminium oxide)) guarantees greater working efficiency and reduces the risk of clogging. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
Blade for reciprocating saw GRAPHITE about the length 228 mm and 3 with teeth an inch long intended for cutting, among others fiber-cement boards, cellular concrete, red brick, glass, fiberglass-reinforced plastics, epoxy resin, abrasives using saber saws. The maximum thickness of the materials is 175 mm. It is used in renovation, construction and demolition works as well as in home amateur work. It enables straight cutting. The saw blade produces less dust when cutting compared to traditional methods. Enables cutting close to the edge and in hard-to-reach places.
Sand belt GRAPHITE (ref. no. 55H787) with granulation K40 and size 75 x 457 mm. Dedicated to grinding wood, wood-based materials, metals and plastics. Product with X-cloth backing designed for mechanical grinding. The paper’s semi-open coating (80-90% of the paper surface is covered with abrasive grain (aluminium oxide)) guarantees greater working efficiency and reduces the risk of clogging. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
Sanding paper GRAPHITE (ref. no. 55H894) in a sheet with dimensions 230 x 280 mm and granulation 240. Dedicated to grinding wood, wood-based materials, metals and plastics. The abrasive paper with C-paper backing designed for mechanical grinding. The paper’s semi-open coating (80-90% of the paper surface is covered with abrasive grain (alumina)) guarantees greater working efficiency and reduces the risk of clogging. The product designed to be used with orbital grinders, trowels and sanding blocks. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
Saw and plunge-cutting circular saw blade, Widia GRAPHITE (ref. 55H685) with external diameter 160 mm, made from special C50 steel with increased resistance to abrasion and deformation. Tungsten carbide teeth with ATB geometry (alternate) allow precise cutting of wood and wood based materials such as plywood, chipboard, MDF. The included reduction rings allow the blade to be used with most saw models. The GRAPHITE brand offers a wide range of power tools to meet the needs of professionals.
Abrasive sponge GRAPHITE (ref. no. 55H915) with dimensions 70 x 25 x 10 mm and granulation 60. Designed for finish grinding. Perfectly suitable for manual grinding and smoothing of putty, finish coats, gypsum, paints, plastics, wood, metal and varnish coatings. Suitable for wet and dry processing. Abrasive grain coating on four sides of the sponge. Thanks to its soft structure, the sponge adapts perfectly to the shape of ground surfaces. The sponge can be cut into smaller pieces to process hard-to-reach areas. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
Sanding paper GRAPHITE (ref. no. 55H747) with dimensions 93 x 230 mm and granulation 40, with holes. Dedicated to grinding wood, wood-based materials, metals and plastics. The abrasive paper with E-paper backing designed for mechanical grinding. The paper’s semi-open coating (80-90% of the paper surface is covered with abrasive grain (aluminium oxide)) guarantees greater working efficiency and reduces the risk of clogging . Designed for mounting on orbital grinders. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
Sanding paper GRAPHITE (ref. no. 55H886) in a sheet with dimensions 230 x 280 mm and granulation 60. Dedicated to grinding wood, wood-based materials, metals and plastics. The abrasive paper with C-paper backing designed for mechanical grinding. The paper’s semi-open coating (80-90% of the paper surface is covered with abrasive grain (alumina)) guarantees greater working efficiency and reduces the risk of clogging. The product designed to be used with orbital grinders, trowels and sanding blocks. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
Blade for reciprocating saw GRAPHITE about the length 228 mm and variable dentition 8/6 teeth per inch long intended for cutting, among others wood with nails, plastics, fiberglass-reinforced composites, epoxy resin, plasterboard, window frames, wood, metal, fiber cement boards using saber saws. The maximum thickness of the materials is 175 mm. It is used in renovation, construction and demolition works as well as in home amateur work. It enables straight cutting. The saw blade produces less dust when cutting compared to traditional methods. Enables cutting close to the edge and in hard-to-reach places.
Takjakinnitusega lihvkettad on mõeldud puidu, puitmaterjalide, metalli ja plastiku lihvimiseks. 150 mm läbimõõduga ning K150 karedusega kettad sobivad vahelihvimiseks ja pindade ettevalmistamiseks enne lõppviimistlust. Kettad on valmistatud alumiiniumoksiidist abrasiiviga ning E-tüüpi paberalusel, mis tagab hea kulumiskindluse ja tõhusa lihvimise. Poolavatud abrasiivkate vähendab ketta ummistumist ning aitab säilitada ühtlast lihvimistulemust.
8 tolmueemaldusava võimaldavad kasutada kettaid koos tolmueemaldussüsteemiga lihvijatel, vähendades tolmu hulka tööpiirkonnas. Takjakinnitus tagab kiire ja mugava lihvketta vahetamise. Kettad sobivad kasutamiseks eksentrik- ja orbitaallihvijatega.
