GRAPHITE elektritööriistad ja käsitööriistad Hammerjackis
Hammerjack on GRAPHITE toodete ametlik maaletooja. GRAPHITE on Euroopa tööriistabränd, mis pakub kvaliteetseid elektritööriistu, akutööriistu ja käsitööriistu ehitus-, remondi- ja paigaldustöödeks. Bränd keskendub töökindlatele lahendustele, mis ühendavad vastupidavuse, kasutusmugavuse ja suurepärase hinna ning kvaliteedi suhte.
Hammerjacki GRAPHITE valikust leiad akutrellid, lööktrellid, nurklihvijad, tikksaed, ketassaed, lihvijad, multifunktsionaalsed tööriistad, käsitööriistad ning laia valiku tarvikuid erinevateks ehitus- ja remonditöödeks.
Tööriistad nõudlikule kasutajale
GRAPHITE tööriistad on loodud pakkuma usaldusväärset jõudlust ja pikka kasutusiga. Kaasaegsed tehnilised lahendused, vastupidavad materjalid ja ergonoomiline disain aitavad saavutada täpseid tulemusi puidu, metalli, betooni ning teiste materjalide töötlemisel.
Miks valida GRAPHITE?
GRAPHITE toodete ametlik maaletooja.
Kvaliteetsed elektri- ja akutööriistad.
Lai valik käsitööriistu ja tarvikuid.
Vastupidavad ning ergonoomilised lahendused.
Suurepärane hinna ja kvaliteedi suhe.
Usaldusväärsed tööriistad igaks projektiks
GRAPHITE pakub töökindlaid lahendusi ehitajatele, paigaldajatele, hooldustehnikutele ja nõudlikele kodukasutajatele. Hammerjackist leiad laia valiku GRAPHITE originaaltooteid erinevateks ehitus-, remondi- ja paigaldustöödeks.
Sanding cloth GRAPHITE (ref. no. 55H867) in a roll, 2.5 m long, 115 mm wide and granulation 40. Dedicated to grinding wood, wood-based materials, metals and plastics. The abrasive cloth with J-cloth backing designed for mechanical and manual grinding. The cloth’s close coating (100% of the cloth surface is covered with abrasive grain (alumina)) guarantees greater processing accuracy and the highest efficiency when processing hard materials. The product designed to be used with orbital grinders, trowels and sanding blocks. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
Water abrasive paper GRAPHITE (ref. no. 55H902) in a sheet with dimensions 230 x 280 mm and granulation 220. Designed mainly for wet varnish and plastic grinding applications in automotive industry as well as wood and metal processing. The abrasive paper’s backing is a very flexible latex paper which perfectly adapts to the workpiece. Close coating (100% of the paper surface is covered with abrasive grain) guarantees increased durability and processing accuracy. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
Metal drills GRAPHITE (ref. no. 57H014-10) with diameters 2.0 mm are made of high quality M35 HSS alloy with 5% cobalt additive. 135° point angle and chisel edge correction allow for easy drilling without punching. Thanks to alloy resistance to high temperature, the drills are perfect for drilling holes in hardly machinable materials, like stainless steel, acid resistant steel, heat resistant steel etc.
Sanding paper GRAPHITE (ref. no. 55H861) in a roll, 2.5 m long, 115 mm wide and granulation 80. Dedicated to grinding gypsum, finishing putty, wood, paint and varnish. The abrasive paper with D-paper backing designed for mechanical and manual grinding. The paper’s open coating (50-60% of the paper surface is covered with abrasive grain (white fused alumina)) guarantees greater resistance of the grain surface to clogging with abrasive dust . The product designed to be used with orbital grinders and sanding trowels. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
Water abrasive paper GRAPHITE (ref. no. 55H901) in a sheet with dimensions 230 x 280 mm and granulation 180. Designed mainly for wet varnish and plastic grinding applications in automotive industry as well as wood and metal processing. The abrasive paper’s backing is a very flexible latex paper which perfectly adapts to the workpiece. Close coating (100% of the paper surface is covered with abrasive grain) guarantees increased durability and processing accuracy. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
Solid carbide saw blade GRAPHITE (ref. no. 55H605) with diameters 180 mm, made of MN65 manganese steel alloy with high resistance to temperature and deformations. Teeth with sintered carbide tips YG6A are designed for rough cutting of wood and wood like materials, like plywood, chipboard, MDF. Thanks to included adapter rings it is possible to use the blade in most of saw models.
Metal drills GRAPHITE (ref. no. 57H020-10) with diameters 3.0 mm are made of high quality M35 HSS alloy with 5% cobalt additive. 135° point angle and chisel edge correction allow for easy drilling without punching. Thanks to alloy resistance to high temperature, the drills are perfect for drilling holes in hardly machinable materials, like stainless steel, acid resistant steel, heat resistant steel etc.
Metal drills GRAPHITE (ref. no. 57H062-5) with diameters 12.0 mm are made of high quality M35 HSS alloy with 5% cobalt additive. 135° point angle and chisel edge correction allow for easy drilling without punching. Thanks to alloy resistance to high temperature, the drills are perfect for drilling holes in hardly machinable materials, like stainless steel, acid resistant steel, heat resistant steel etc.
Fibra sanding disc GRAPHITE (ref. no. 55H858) with outer diameter 125 mm and granulation 100. Dedicated to grinding metal, steel, plastic, wood and even finishing putty. Ideally suited for deburring, removing rust and processing of welds. The disc with close coating. 100% of the disc surface is covered with abrasive grain (alumina), which guarantees greater processing accuracy and increased working efficiency. The disc is mounted to an angle grinder using a dedicated flexible disc. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
Blades for reciprocating saw HCS/BIM GRAPHITE It is used in renovation, construction and demolition works as well as in home amateur work. Set of 10 saw blades for cutting construction wood, wet wood, firewood, with nails / metal, chipboard and MDF, plywood, plastic and sheet metal, profiles and small pipes. Enables fast and precise straight and curved / plunge cuts.
GRAPHITE metal drill with 2.5 mm diameter is made of high quality alloy of high speed steel. 124° point angle and chisel edge correction allow for easy drilling without punching. Designed for fast and efficient drilling in steel workpieces.
GRAPHITE metal drill with 13.0 mm diameter is made of high quality alloy of high speed steel. 124° point angle and chisel edge correction allow for easy drilling without punching. Designed for fast and efficient drilling in steel workpieces.
Water abrasive paper GRAPHITE (ref. no. 55H903) in a sheet with dimensions 230 x 280 mm and granulation 240. Designed mainly for wet varnish and plastic grinding applications in automotive industry as well as wood and metal processing. The abrasive paper’s backing is a very flexible latex paper which perfectly adapts to the workpiece. Close coating (100% of the paper surface is covered with abrasive grain) guarantees increased durability and processing accuracy. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
Water abrasive paper GRAPHITE (ref. no. 55H911) in a sheet with dimensions 230 x 280 mm and granulation 2500. Designed mainly for wet varnish and plastic grinding applications in automotive industry as well as wood and metal processing. The abrasive paper’s backing is a very flexible latex paper which perfectly adapts to the workpiece. Close coating (100% of the paper surface is covered with abrasive grain) guarantees increased durability and processing accuracy. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
GRAPHITE metal drill with 3.8 mm diameter is made of high quality alloy of high speed steel. 124° point angle and chisel edge correction allow for easy drilling without punching. Designed for fast and efficient drilling in steel workpieces.
The GRAPHITE Widia saw blade (ref. 55H694) has an outside diameter of 235 mm and is made from C50 special steel with increased resistance to abrasion and deformation. Tungsten carbide teeth with ATB (alternate) geometry for accurate cutting of wood and wood based materials such as plywood, chipboard, MDF. The included reduction rings allow the blade to be used with most saw models. The GRAPHITE brand offers a wide range of power tools to meet the needs of professionals.
Pro-Tec HSS-CNC metallipuuride komplekt sisaldab 19 kvaliteetset metallipuuri mõõtudega 1,0–10,0 mm, pakkudes laia valikut enimkasutatavaid suurusi professionaalseteks puurimistöödeks. Komplekt sobib suurepäraselt metalli, värviliste metallide ja plastide täpseks töötlemiseks.
Puurid on valmistatud vastupidavast HSS kiirlõiketerasest ning varustatud 124° tipugeomeetriaga, mis tagab täpse tsentreerimise, sujuva puurimise alguse ja stabiilse juhtimise. Tänu kvaliteetsele töötlusele on puuridel pikk kasutusiga ning hea kulumiskindlus.
Toote omadused:
Komplektis 19 metallipuuri
Mõõduvahemik: 1,0–10,0 mm
Tüüp: HSS-CNC metallipuurid
Seeria: Pro-Tec
Tipunurk: 124°
Täpne puurimise algus ja stabiilne juhtimine
Vastupidav ja kulumiskindel konstruktsioon
Sobib professionaalseks ja igapäevaseks kasutamiseks
Sanding paper GRAPHITE (ref. no. 55H884) in a sheet with dimensions 230 x 280 mm and granulation 36. Dedicated to grinding wood, wood-based materials, metals and plastics. The abrasive paper with C-paper backing designed for mechanical grinding. The paper’s semi-open coating (80-90% of the paper surface is covered with abrasive grain (alumina)) guarantees greater working efficiency and reduces the risk of clogging. The product designed to be used with orbital grinders, trowels and sanding blocks. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
The Hex 8.0 mm metal drill bit 54T715 by GRAPHITE is an accessory with Hex mounting, characterised by an overall length of 117 mm and a working length of 75 mm. It is DIN 338 compliant, with a 118 degree tip angle for comfortable working. The GRAPHITE brand drill bit is designed for working with metal. It will prove itself in amateur applications.
The Hex 9.0 mm metal drill bit 54T717 by GRAPHITE is an accessory with Hex mounting, characterised by an overall length of 125 mm and a working length of 81 mm. It is DIN 338 compliant, with a 118 degree tip angle for comfortable working. The GRAPHITE brand drill bit is designed for working with metal. It will prove itself in amateur applications.
