GRAPHITE elektritööriistad ja käsitööriistad Hammerjackis
Hammerjack on GRAPHITE toodete ametlik maaletooja. GRAPHITE on Euroopa tööriistabränd, mis pakub kvaliteetseid elektritööriistu, akutööriistu ja käsitööriistu ehitus-, remondi- ja paigaldustöödeks. Bränd keskendub töökindlatele lahendustele, mis ühendavad vastupidavuse, kasutusmugavuse ja suurepärase hinna ning kvaliteedi suhte.
Hammerjacki GRAPHITE valikust leiad akutrellid, lööktrellid, nurklihvijad, tikksaed, ketassaed, lihvijad, multifunktsionaalsed tööriistad, käsitööriistad ning laia valiku tarvikuid erinevateks ehitus- ja remonditöödeks.
Tööriistad nõudlikule kasutajale
GRAPHITE tööriistad on loodud pakkuma usaldusväärset jõudlust ja pikka kasutusiga. Kaasaegsed tehnilised lahendused, vastupidavad materjalid ja ergonoomiline disain aitavad saavutada täpseid tulemusi puidu, metalli, betooni ning teiste materjalide töötlemisel.
Miks valida GRAPHITE?
GRAPHITE toodete ametlik maaletooja.
Kvaliteetsed elektri- ja akutööriistad.
Lai valik käsitööriistu ja tarvikuid.
Vastupidavad ning ergonoomilised lahendused.
Suurepärane hinna ja kvaliteedi suhe.
Usaldusväärsed tööriistad igaks projektiks
GRAPHITE pakub töökindlaid lahendusi ehitajatele, paigaldajatele, hooldustehnikutele ja nõudlikele kodukasutajatele. Hammerjackist leiad laia valiku GRAPHITE originaaltooteid erinevateks ehitus-, remondi- ja paigaldustöödeks.
Hex chamfer set, 12, 16, 19 mm, set of 3 pieces 54T423 by GRAPHITE are tools for making a chamfer in a drilled hole to hide (flush) the head of a screw or bolt in the material - wood, aluminium and plastic. The chamfers have a ¼" HEX type handle and are characterised by overall lengths of 40, 45 and 45 mm. They will be suitable for screwdrivers and drill drivers. A set of chamfers from the GRAPHITE brand will prove useful in every DIY enthusiast's toolbox.
GRAPHITE's 19mm bi-metal hole saw 56T702 is 51mm high and allows drilling to a depth of 38mm. It is made from HSS high speed steel and is fitted with a 1/2'' x 20 UNF thread. It is designed to work in metal, stainless steel (Inox), cast iron, brass, aluminium and wood. The GRAPHITE hole saw is recommended to be used with the 56T753 adapter with pilot drill bit for bi-metal hole saws in the 14-30 mm range. Maximum speeds for this tool, vary depending on the material: steel - 460 rpm, Inox steel - 230 rpm, aluminium - 690 rpm, wood - 680 rpm, cast iron - 300 rpm, brass - 600 rpm. The bi-metal hole saw is designed for use with a drill or drill/driver.
Velcro sanding discs 150 mm, P150, 5 pieces, with 8 holes 58T280 by GRAPHITE is a set of 5 sanding discs, designed for sanding metal, plastic and wood. It is compatible with orbital and eccentric sanders, with a diameter of 150 mm. The GRAPHITE discs are fitted with 8 holes so that sanding dust is freely discharged during use. The Velcro attachment allows for quick replacement of a worn accessory. The discs are characterised by their electro-corundum coating. Their abrasive backing is made of paper. GRAPHITE abrasive discs are recommended for many tasks.
The TiN, 6 mm 54T405 universal drill bit by GRAPHITE is a TiN coated drill bit and fitted with a cylindrical chuck. It features a diameter of 6 mm and an overall length of 72 mm. The maximum rotational speed is 1000 rpm. The GRAPHITE universal drill bit is designed for use in wood, metal, concrete, ceramics and plastics.
The 6 x 150 mm ground 56T302 concrete drill bit by GRAPHITE is a ground drill bit for concrete, brick and stone, fitted with a standard cylindrical chuck. It features a diameter of 6 mm, an overall length of 150 mm and a working length of 90 mm. The GRAPHITE drill bit will prove useful in domestic applications.
Water sandpaper 230 x 280 mm, P360, 58T220 by GRAPHITE is a water-based hand sanding paper. It has a full grain electro-corundum coating, 100% coverage and a flexible latex C backing. It is suitable for wood, metal, paint, plastic, glass and plasterboard. This type of GRAPHITE brand sandpaper has been developed for use with water. Its special surface is coated with an abrasive layer which forms an abrasive paste on contact with the liquid. It makes the sanding process more efficient. The water also prevents the accumulation of dust, keeping the surface clean and increasing the efficiency of sanding. Working with wet sandpaper also minimises the risk of damage to the surface. The GRAPHITE brand is recommended for DIY enthusiasts.
Velcro sanding discs 150 mm, P100, 5 pieces, with 8 holes 58T284 by GRAPHITE is a set of 5 sanding discs, designed for sanding metal, plastic and wood. It is compatible with orbital and eccentric sanders, with a diameter of 150 mm. The GRAPHITE discs are fitted with 8 holes so that sanding dust is freely discharged during use. The Velcro attachment allows for quick replacement of a worn accessory. The discs are characterised by their electro-corundum coating. Their abrasive backing is made of paper. GRAPHITE abrasive discs are recommended for many tasks.
Velcro sanding papers 93 x 185 mm, P180, 5 pieces, with 8 holes 58T246 by GRAPHITE is a paper designed for sanding metal, wood and plastics. It has 8 holes for effective dust extraction during work. It uses a type C paper base, suitable for machine sanding. The surface is coated with semi-open grain electro-corundum, where the abrasive grain provides 100% coverage. The Velcro attachment makes it easy to change GRAPHITE paper quickly and conveniently while working.
Sanding cloth 230 x 280 mm, P46, 58T343 by GRAPHITE is an accessory with full grain electro-corundum and flexible JF backing. It has 100% coverage and contains a synthetic resin bond. It will work well with plasterboard, wood, metal and plastics. GRAPHITE brand abrasive canvas is recommended for coarse coating removal.
GRAPHITE's 57T305 segmented diamond cutting wheel, 115 x 22.2 mm, dry 57T305 is a segmented dry cutting wheel with a diameter of 115 mm and a mounting hole of 22.2 mm. The cutting segment is 7 mm high and 2 mm wide. The maximum speed of the disc is 13 200 rpm, corresponding to 80 m/s. The GRAPHITE blade meets the requirements of the EN13236 standard. It is designed for cutting granite, concrete, brick, stone and marble.
Cleaning brushes for drill, 4 pieces 57T437 by GRAPHITE are four brushes with diameters of 50 mm, 90 mm, 100 mm and 130 mm. Their attachment is by means of a universal 1/4" HEX chuck. The brushes are designed for use with any drill or screwdriver. The different head shapes allow them to work on different surfaces and reach hard-to-reach areas. They are suitable for wet or dry cleaning. The medium-hard bristles effectively remove dirt without damaging the surface. GRAPHITE brand brushes are used in the home, workshop, garage and car
HSS metal drill bit, DIN 338, 11 mm 54T922 by GRAPHITE is a metal accessory characterised by a diameter of 11 mm, an overall length of 142 mm and a working part length of 94 mm. The drill bit is made from HSS high speed steel. It has a cylindrical chuck and a 118° drill sharpening angle. It is DIN 338 compliant and will be suitable for every DIY enthusiast.
Water sandpaper 230 x 280 mm, P1200, 58T226 by GRAPHITE is a water-based hand sanding paper. It has a full grain electro-corundum coating, 100% coverage and a flexible C latex backing. It is suitable for wood, metal, paint, plastic, glass and plasterboard. This type of GRAPHITE brand sandpaper has been developed for use with water. Its special surface is coated with an abrasive layer which forms an abrasive paste on contact with the liquid. It makes the sanding process more efficient. The water also prevents the accumulation of dust, keeping the surface clean and increasing the efficiency of sanding. Working with wet sandpaper also minimises the risk of damage to the surface. The GRAPHITE brand is recommended for DIY enthusiasts.
GRAPHITE's 125 mm diameter wire wheel brush, twisted steel wire, M14, 57T411 by GRAPHITE is made from twisted steel wire. Equipped with an M14 thread, it is designed for use with angle grinders. The maximum speed of the tool is 12500 rpm. The product meets the requirements of EN 1083-2 and is well suited for roughing metal surfaces, aggressive cleaning, removing rust, paint or dirt.
Saw blade, widia, 170 x 30 mm, 36 teeth 57T213 by GRAPHITE, with an external diameter of 170 mm and a mounting hole diameter of 30 mm. It has 36 teeth, the cut width is 2 mm and the tooth angle is 15°. The maximum speed is 10,500 rpm. It is characterised by a fast cutting type. The saw blade complies with EN 847-1 and includes 30/25.4 mm, 30/20 mm and 30/16 mm reduction rings. The GRAPHITE brand saw blade is designed for cutting wood and wood-based materials such as plywood, chipboard and MDF. The reduction rings included in the package allow the blade to be used with most saw models.
The TiN, 7 mm 54T406 universal drill bit by GRAPHITE is a TiN coated drill bit and fitted with a cylindrical chuck. It features a diameter of 7 mm and an overall length of 75 mm. The maximum rotational speed is 1000 rpm. The GRAPHITE universal drill bit is designed for use in wood, metal, concrete, ceramics and plastics.
Sanding discs, perforated, on Velcro with holes 225 mm, P220, 5 pieces 58T277 by GRAPHITE is a set of 5 pieces of sanding discs, designed for sanding plaster and drywall. It is compatible with "giraffe" type sanders and cantilever devices, with a diameter of 225 mm. GRAPHITE discs are equipped with perforated holes on the entire surface, so that the sanding dust is discharged smoothly during work. At the same time, the work surface does not get too hot during sanding, and the Velcro attachment allows for quick replacement of a worn accessory. The discs are characterised by an electro-corundum grain and an open type of grit. GRAPHITE abrasive discs are recommended for many tasks.
Wood drill bit set: 3, 4, 5, 6, 7, 8, 9, 10 mm, 8 pieces 54T575 by GRAPHITE is a set of 8 drill bits with diameters from 3 to 10 mm with a practical cylindrical handle. They allow drilling to various depths in wood and plywood. They are characterised by an overall length from 60 to 120 mm and a maximum speed for each diameter: 3 mm - 1800 rpm, 4 mm - 1800 rpm, 5 mm - 1700 rpm, 6 mm - 1400 rpm, 7 mm - 1200 rpm, 8 mm - 900 rpm, 10 mm - 700 rpm. They will work well for many DIY projects.
Yellow sanding paper in roll 2.5 m x 115 mm, P150, 58T425 by GRAPHITE is a product designed for sanding surfaces such as metal, wood, plastic and plasterboard. Made on a D-paper base, it is characterised by high durability and resistance to tearing. Thanks to its open grain, in which the surface is coated with 50-60% electro-corundum abrasive grain, the paper offers greater resistance to sanding dust clogging. It can be used for both manual and machine sanding - including with orbital sanders and gypsum sanding trowels.
GRAPHITE's 8 x 200 mm 56T208 concrete drill bit with cylindrical shank, has a diameter of 8 mm, an overall length of 200 mm and a working length of 120 mm. Recommended for concrete, brick and stone applications.
