GRAPHITE elektritööriistad ja käsitööriistad Hammerjackis
Hammerjack on GRAPHITE toodete ametlik maaletooja. GRAPHITE on Euroopa tööriistabränd, mis pakub kvaliteetseid elektritööriistu, akutööriistu ja käsitööriistu ehitus-, remondi- ja paigaldustöödeks. Bränd keskendub töökindlatele lahendustele, mis ühendavad vastupidavuse, kasutusmugavuse ja suurepärase hinna ning kvaliteedi suhte.
Hammerjacki GRAPHITE valikust leiad akutrellid, lööktrellid, nurklihvijad, tikksaed, ketassaed, lihvijad, multifunktsionaalsed tööriistad, käsitööriistad ning laia valiku tarvikuid erinevateks ehitus- ja remonditöödeks.
Tööriistad nõudlikule kasutajale
GRAPHITE tööriistad on loodud pakkuma usaldusväärset jõudlust ja pikka kasutusiga. Kaasaegsed tehnilised lahendused, vastupidavad materjalid ja ergonoomiline disain aitavad saavutada täpseid tulemusi puidu, metalli, betooni ning teiste materjalide töötlemisel.
Miks valida GRAPHITE?
GRAPHITE toodete ametlik maaletooja.
Kvaliteetsed elektri- ja akutööriistad.
Lai valik käsitööriistu ja tarvikuid.
Vastupidavad ning ergonoomilised lahendused.
Suurepärane hinna ja kvaliteedi suhe.
Usaldusväärsed tööriistad igaks projektiks
GRAPHITE pakub töökindlaid lahendusi ehitajatele, paigaldajatele, hooldustehnikutele ja nõudlikele kodukasutajatele. Hammerjackist leiad laia valiku GRAPHITE originaaltooteid erinevateks ehitus-, remondi- ja paigaldustöödeks.
The 68mm polystyrene cutter 56T615 by GRAPHITE is a 68mm diameter cutter that has an 8mm hex shank and allows drilling to a depth of 20mm. It is designed to work in polystyrene - especially for masking areas after the installation of thermal insulation studs.
The 150 x 32 mm wire wheel brush, twisted wire, brassed 57T406 by GRAPHITE is made of twisted brassed wire. Its maximum speed is 6000 rpm. The product complies with EN 1083-2 and includes reductions: 2 x 12.2 mm (1/2"), 2 x 15.7 mm (5/8"), 2 x 19 mm (3/4"), 2 x 22.2 mm (7/8") and 2 x 25.3 mm (1"). The mount is suitable for use with bench grinders. The GRAPHITE wire brush is a versatile product for a wide range of tasks, including aggressive cleaning and initial roughing.
Saw blade, widia, 210 x 30 mm, 40 teeth 57T228 by GRAPHITE, with an external diameter of 210 mm and a mounting hole diameter of 30 mm. It has 40 teeth, the cut width is 2.4 mm and the tooth angle is 15°. The maximum speed is 8,000 rpm. It is characterised by a fast cutting type. The blade complies with EN 847-1 and includes 30/25.4 mm, 30/20 mm and 30/16 mm reduction rings. The GRAPHITE brand saw blade is designed for cutting wood and wood-based materials such as plywood, chipboard and MDF. The reduction rings included in the package allow the blade to be used with most saw models.
Jigsaw blade, 12 TPI, HCS, T-handle, 2 pieces, curved cutting 57T543 by GRAPHITE is a jigsaw blade, with a tooth density of 12 TPI, made of HCS and with a T-handle. The set includes 2 pieces. The overall length of the blade is 76 mm, working length 50 mm, width 5.2 mm, thickness 1 mm, tooth spacing 2 mm. Suitable for cutting softwood 2-15 mm thick, chipboard, plywood and fibreboard. The GRAPHITE blade allows for curved and basic cuts.
Saw blade, widia, 230 x 30 mm, 80 teeth 57T229 by GRAPHITE, with an external diameter of 230 mm and a mounting hole diameter of 30 mm. It has 80 teeth, the cut width is 2.4 mm and the tooth angle is 15°. The maximum speed is 7,500 rpm. It is characterised by a fast cutting type. The saw blade complies with EN 847-1 and includes 30/25.4 mm, 30/20 mm and 30/16 mm reduction rings. The GRAPHITE brand saw blade is designed for cutting wood and wood-based materials such as plywood, chipboard and MDF. The reduction rings included in the package allow the blade to be used with most saw models.
Sabre saw blade set, TPI 5, TPI 6, TPI 18, HCS/BIM, 10 piece set 57T566 by GRAPHITE containing 10 pieces and consisting of: 3x 57T563 - GRAPHITE HCS saw blades, 240 mm long, 19 mm wide and 1.5 mm thick, with 5 mm tooth spacing (5 TPI), designed for cutting thick wood without nails (15-190 mm), trimming green wood (diameter <190 mm) and firewood (diameter 15-190 mm); for fast and rough cutting, 4x 57T564 - GRAPHITE HCS saw blades, 152 mm long, 19 mm wide and 1.3 mm thick, with tooth pitch 4 mm (6 TPI), designed for cutting structural timber, plywood, plastics (6-100 mm), wood panels (<75 mm), chipboard and MDF (6-60 mm); for clean curved and plunge cuts, 3x 57T561 - GRAPHITE BIM saw blades, 152 mm long, 19 mm wide and 0.9 mm thick, with 1.4 mm tooth pitch (18 TPI), for thin sheet metal (1.5-4 mm), open and closed tubes and profiles with a diameter of 5-100 mm; offering flexibility and straight cutting.
The spiral wood drill, 12 x 230 mm 54T553 by GRAPHITE is a drill bit designed for working with wood and plywood, featuring a hexagonal chuck, and a spiral design. It features a diameter of 12 mm and a length of 230 mm. Adapted for tasks with a maximum speed of 1500 rpm. Will work well for many DIY tasks.
The 12 x 150 mm ground concrete drill bit 56T307 by GRAPHITE is a ground concrete, brick and stone drill bit with a standard cylindrical chuck. It features a diameter of 12 mm, an overall length of 150 mm and a working length of 90 mm. The GRAPHITE drill bit will prove useful in domestic applications.
Velcro sanding discs 150 mm, P60, 5 pieces, unperforated 58T172 by GRAPHITE are unperforated discs for metal, wood and plastic. Gradation P60 - the sharpest - allows appropriate sanding, according to the needs and the stage of surface preparation. The backing is made of type C paper and is suitable for machine use. The electro-corundum abrasive coating ensures high efficiency, and the Velcro fastening allows GRAPHITE discs to be changed quickly and conveniently.
Water sandpaper 230 x 280 mm, P280, 58T218 by GRAPHITE is a water-based hand sanding paper. It has a full grain electro-corundum coating, 100% coverage and a flexible C latex backing. It is suitable for wood, metal, paint, plastic, glass and plasterboard. This type of GRAPHITE brand sandpaper has been developed for use with water. Its special surface is coated with an abrasive layer which forms an abrasive paste on contact with the liquid. It makes the sanding process more efficient. The water also prevents the accumulation of dust, keeping the surface clean and increasing the efficiency of sanding. Working with wet sandpaper also minimises the risk of damage to the surface. The GRAPHITE brand is recommended for DIY enthusiasts.
Jigsaw blade, 15 TPI, BIM, T-handle, 2 pieces, clean cut 57T550 by GRAPHITE is a jigsaw blade with 15 TPI tooth density, made of BIM and fitted with a T-handle. The set includes 2 pieces. It has an overall length of 100 mm, a working length of 74 mm, a width of 8 mm, a thickness of 1.27 mm and a tooth spacing of 1.7 mm. Suitable for cutting hardwood, laminate or plasterboard (<30 mm) The GRAPHITE brand blade enables clean cutting.
GRAPHITE's 53mm 56T740 tungsten tipped hole saw is designed for use in brick, hollow block, cellular concrete, plasterboard and lightweight building materials. It has a height of 68mm and provides a drilling depth of 57mm. The cutting edge of the hole saw is coated with a tungsten carbide coating and has a maximum speed of 1,200 rpm. The tool is designed for use with the 56T744 tungsten carbide hole saw blade and 56T745 pilot drill. It can be used for any installation work, such as fitting power sockets, distribution boxes or pipes. It can also be used for cable conduit pipes, ventilation pipes or installation fans in the kitchen or bathroom.
The 80 mm wire wheel brush, crimped wire, brassed with 6 mm shank 57T405 by GRAPHITE is made of crimped brassed wire. Its maximum speed is 4,500 rpm. The product meets the requirements of EN 1083-2 and comes with a 6mm shank, allowing it to work with any drill or screwdriver. The GRAPHITE wire brush is a versatile product for many tasks.
The GRAPHITE 57T503 plunge-cutting, BIM Co 8%, 65 mm blade 57T503 is a tool for multifunction machines with a blade width of 65 mm. It is made from bi-metal (BIM) with 8% cobalt (Co8%). The GRAPHITE blade is designed for plunge cutting wood, wood with nails, metal, plastic and plasterboard. It has a tooth pitch of 1.4mm, 18 TPI, a maximum cutting depth of 40mm and a blade thickness of 0.8mm. Recommended for precision work in a wide variety of materials.
Glass drill bit 4 mm 54T412 by GRAPHITE characterised by a diameter of 4 mm and an overall length of 68 mm. Equipped with a 3.5 mm cylindrical shank. It will prove its worth when working with glass. GRAPHITE drill bit is recommended for DIY enthusiasts.
Velcro sanding discs 125 mm, P80, 5 pieces, with 8 holes 58T290 by GRAPHITE is a set of 5 sanding discs, designed for sanding metal, plastic and wood. It is compatible with orbital and eccentric sanders, with a diameter of 125 mm. The GRAPHITE discs are fitted with 8 holes so that sanding dust is freely discharged during use. The Velcro attachment allows for quick replacement of a worn accessory. The discs are characterised by their electro-corundum coating. Their abrasive backing is made of paper. GRAPHITE abrasive discs are recommended for many tasks.
The GRAPHITE 57T303 solid diamond cutting wheel, 180 x 25.4 mm, wet 57T303 is a solid diamond cutting wheel with a diameter of 180 mm and a mounting hole of 25.4 mm. A practical reduction ring is included. The cutting segment is 5 mm high and 2.2 mm wide. The maximum speed of the disc is 8 600 rpm, corresponding to 80 m/s. The GRAPHITE blade meets the requirements of the EN13236 standard. It is designed for cutting terracotta, stoneware, granite and marble.
Turbo diamond cutting wheel, 125 x 22.2 mm, dry 57T317 by GRAPHITE is a turbo dry cutting wheel with a diameter of 125 mm and a mounting hole of 22.2 mm. A practical reduction ring is included. The cutting segment is 7 mm high and 2.2 mm wide. The maximum speed of the disc is 12 200 rpm, corresponding to 80 m/s. The GRAPHITE blade meets the requirements of EN 13236 and is designed for cutting stone, brick, marble, granite and concrete.
