GRAPHITE elektritööriistad ja käsitööriistad Hammerjackis
Hammerjack on GRAPHITE toodete ametlik maaletooja. GRAPHITE on Euroopa tööriistabränd, mis pakub kvaliteetseid elektritööriistu, akutööriistu ja käsitööriistu ehitus-, remondi- ja paigaldustöödeks. Bränd keskendub töökindlatele lahendustele, mis ühendavad vastupidavuse, kasutusmugavuse ja suurepärase hinna ning kvaliteedi suhte.
Hammerjacki GRAPHITE valikust leiad akutrellid, lööktrellid, nurklihvijad, tikksaed, ketassaed, lihvijad, multifunktsionaalsed tööriistad, käsitööriistad ning laia valiku tarvikuid erinevateks ehitus- ja remonditöödeks.
Tööriistad nõudlikule kasutajale
GRAPHITE tööriistad on loodud pakkuma usaldusväärset jõudlust ja pikka kasutusiga. Kaasaegsed tehnilised lahendused, vastupidavad materjalid ja ergonoomiline disain aitavad saavutada täpseid tulemusi puidu, metalli, betooni ning teiste materjalide töötlemisel.
Miks valida GRAPHITE?
GRAPHITE toodete ametlik maaletooja.
Kvaliteetsed elektri- ja akutööriistad.
Lai valik käsitööriistu ja tarvikuid.
Vastupidavad ning ergonoomilised lahendused.
Suurepärane hinna ja kvaliteedi suhe.
Usaldusväärsed tööriistad igaks projektiks
GRAPHITE pakub töökindlaid lahendusi ehitajatele, paigaldajatele, hooldustehnikutele ja nõudlikele kodukasutajatele. Hammerjackist leiad laia valiku GRAPHITE originaaltooteid erinevateks ehitus-, remondi- ja paigaldustöödeks.
Screw strippers for broken screws, 3-19 mm, set of 5 pieces 54T428 by GRAPHITE is a set of screw strippers that allows you to remove damaged or broken screws in a fast and effective way. It consists of universally sized pieces that make it possible to remove screws with diameters: 3-6 mm, 6-8 mm, 8-11 mm, 11-14 mm, 14-19 mm with a square handle, without destroying the threads. GRAPHITE extractors are characterised by working lengths: 13, 21, 25, 28, 35 mm, and overall lengths: 51, 57, 65, 73, 80 mm. They will prove useful for many DIY tasks.
The sabre saw blade, BIM 228 x 19 x 0.9 mm, 18 TPI, 57T560 by GRAPHITE is a bi-metal (BIM) blade with an overall length of 228 mm, a width of 19 mm and a thickness of 0.9 mm. It has 18 teeth per inch (TPI) and a tooth spacing of 1.4 mm. It is designed for straight cutting of thin sheet metal 1.5-4 mm thick, open and closed tubes, as well as profiles from 5 to 175 mm in diameter. The flexible design of the GRAPHITE blade allows it to work in harder to reach areas.
GRAPHITE's 6 x 200 mm 56T204 concrete drill bit with cylindrical shank, has a diameter of 6 mm, an overall length of 200 mm and a working length of 120 mm. Recommended for concrete, brick and stone applications.
Velcro sanding discs 125 mm, P180, 5 pieces, without holes 58T186 by GRAPHITE are discs without holes for metal, wood and plastic. Gradation P180 - fine - allows appropriate sanding, according to the needs and the stage of surface preparation. The backing made of type C paper is suitable for machine use. The electro-corundum abrasive coating ensures high efficiency, and the Velcro attachment allows for quick changing of GRAPHITE discs and comfortable working.
Sanding cloth 230 x 280 mm, P40, 58T342 by GRAPHITE is an accessory with full grain electro-corundum and flexible JF backing. It has 100% coverage and contains a synthetic resin bond. It will work well with plasterboard, wood, metal and plastics. GRAPHITE brand abrasive canvas is recommended for coarse coating removal.
Half-round, 21 TPI, HSS, 80 mm 57T504 by GRAPHITE is a half-round disc for the multifunction machine, with a working width of 80 mm. It is made from high speed steel (HSS). It has 21 TPI, a thickness of 0.8 mm and a tooth spacing of 1.2 mm, which enables precise right angle cutting. Suitable for cutting wood, wood with nails, metal, plastic and plasterboard. The blade from the GRAPHITE brand proves its worth in renovation and finishing work, providing efficiency and durability.
GRAPHITE's 57T500 Multi-Purpose Saw Blade, Ceramic Cutting with Diamond Embedment, 60mm 57T500 is a blade designed for cutting ceramics, glass, ceramic materials and for removing mortar and grout. The blade is made of diamond embossing, giving it effective cutting of hard materials and increased durability. Recommended for renovation and finishing work.
With a height of 44 mm, GRAPHITE's 64 mm bi-metal hole saw 56T714 allows drilling to a depth of 38 mm. It is made from HSS high speed steel and is fitted with a 5/8'' x 18 UNF thread. It is designed to work in metal, stainless steel (Inox), cast iron, brass, aluminium and wood. The GRAPHITE hole saw is recommended to be used with the 56T754 adapter with pilot drill bit for bi-metal holesaws in the 32-152 mm range. Maximum speeds for this tool, vary depending on the material: steel - 135 rpm, Inox steel - 65 rpm, aluminium - 205 rpm, wood - 180 rpm, cast iron - 90 rpm, brass - 180 rpm. The bi-metal hole saw is designed for use with a drill or drill/driver.
Sanding cloth 230 x 280 mm, P150, 58T348 by GRAPHITE is an accessory with full grain electro-corundum and flexible JF backing. It has 100% coverage and contains a synthetic resin bond. It will work well with plasterboard, wood, metal and plastics. GRAPHITE brand sanding canvas is recommended for smoothing coatings.
GRAPHITE staples (ref. 56H752) GA18, Type 90, in length 25 mm, for use with many types of staplers, incl. for 2in1 Energy + 18V Li-ion battery stapler (ref. 58G081). Made of galvanized steel, which is more resistant to corrosion and mechanical damage. Staples are widely used, incl. in upholstery, construction or carpentry. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
Sanding canvas in roll 2.5 m x 115 mm, P120, 58T444 by GRAPHITE is an accessory for sanding metal, wood, plastics and plasterboard. The product is made on the basis of J-type canvas, which is characterised by high flexibility and durability. The abrasive has a solid blank - 100% of the surface is covered with abrasive grain (electrocorundum), ensuring effective sanding. GRAPHITE brand canvas is designed for hand sanding.
Wood drill bit, extended 12 x 400 mm 54T559 by GRAPHITE is a drill bit designed for working with wood and plywood and features a cylindrical chuck. It is characterised by a diameter of 12 mm and a length of 400 mm. Suitable for tasks with a maximum speed of 1500 rpm. It will work well for many DIY tasks.
Endless belts 75 x 457 mm, P100, 3 pcs. 58T363 by GRAPHITE are designed for machine use and work with belt sanders. They have a backing made of paper and an electrocorundum coating. GRAPHITE brand belts are suitable for metal, wood, plastic and plasterboard. They will prove their worth in many tasks.
The sabre saw blade, HCS 152 x 19 x 1.3 mm, 6 TPI, 57T564 by GRAPHITE is a carbon steel (HCS) blade with an overall length of 152 mm, a width of 19 mm and a thickness of 1.3 mm. It has 6 teeth per inch (TPI) and a tooth spacing of 4 mm. Designed for clean curved and plunge cutting of materials such as engineered wood, plywood, plastic (6-100 mm), wood panels (<75 mm), particleboard and MDF (6-60 mm). The GRAPHITE blade design allows for comfortable cutting in workshop work.
Sanding papers 93 x 230 mm, P100, 5 pieces, unperforated 58T258 by GRAPHITE are P100 grade papers suitable for sanding metal, wood and plastics. A type C paper base, designed for machine sanding, is used to make a single sheet. The semi-open structure, with 100% of the abrasive grain (electrocorundum) covering the surface, ensures that the paper is sufficiently effective. GRAPHITE sanding papers are offered in a practical set of 5.
HSS metal drills, DIN 338, 5.5 mm, 2 pieces 54T955 by GRAPHITE is a set of 2 metal drills, characterised by a diameter of 5.5 mm, an overall length of 93 mm and a working part length of 57 mm. The drills are made from HSS high speed steel. They have a cylindrical shank and a 118° drill point angle. They comply with DIN 338 and are suitable for every DIY enthusiast.
Velcro sanding discs 125 mm, P60, 5 pieces, with 8 holes 58T289 by GRAPHITE is a set of 5 sanding discs, designed for sanding metal, plastic and wood. It is compatible with orbital and eccentric sanders, with a diameter of 125 mm. The GRAPHITE discs are fitted with 8 holes so that sanding dust is freely discharged during use. The Velcro attachment allows for quick replacement of a worn accessory. The discs are characterised by their electro-corundum coating. Their abrasive backing is made of paper. GRAPHITE abrasive discs are recommended for many tasks.
