Easy installation and accessibility of all maintenance positions
Coaxial screw-type compressor with maintenance-free drive and maximum energy efficiency in all pressure ranges. Low compressor speeds and low load on the bearings of the patented direct drive ensure a very long service life.
EasyTRONIC Micro II electronic control for reliability and efficiency
Prevents motor overload, reduces wear and makes for a longer service life
Monitoring of operating hours, temperature and motor overload
Phase sequence relays control the direction of rotation of the motor, thereby avoiding possible damage during commissioning or after relocation
Optimized cooling system
Low-noise centrifugal fan guarantees optimal operating temperatures even under unfavourable conditions
Thermostatically and electronically controlled fan and generously sized heat exchanger result in a longer service life and less fluctuation in oil temperature
User-friendly in all details
Low noise, suitable for deployment in any work environment
Small footprint facilitates transport and deployment
Service-friendly thanks to optimum accessibility and easy removal and installation of all components that require maintenance
All air and oil lines are made of heat-resistant rubber
Equipped with a star delta circuitry as factory standard
Ready to connect with all fittings and safety equipment
K models with Integrated refrigeration dryer
More reliable compressed air system without costly downtimes and production delays while simultaneously ensuring product quality
Fully integrated into the housing
Ready for use without installation overhead
Equipped with control panel and time-controlled condensate drain
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
AIRPROFI 853/200/10 H on professionaalne statsionaarne kolbkompressor 200-liitrise mahuti ja 10-barise töörõhuga. Imemisvõimsus 850 l/min ning tootlikkus 680 l/min tagavad stabiilse suruõhuvarustuse töökodades, tootmisettevõtetes ja hooldustöödel. Kaheastmeline kompressoriplokk ning kuumtsingitud survemahuti tagavad töökindluse ja pika kasutusea.
Tehnilised andmed:
Toote tüüp: statsionaarne kolbkompressor
Mahuti maht: 200 l
Imemisvõimsus: 850 l/min
Efektiivne tootlikkus: 680 l/min (6 bar töörõhu juures)
A-PLUS 38-10 K VS on sagedusmuunduriga kruvikompressor integreeritud külmkuivatiga. Tootlikkus 2050-5200 l/min, maksimaalne töörõhk 10 bar ning energiasäästlik töökindel lahendus professionaalsetele suruõhusüsteemidele.
Two-cylinder high-performance units made of gray cast iron for a long service life
Aftercooler with cooling fins ensures a low tank inlet temperature and thus less moisture in the compressed air
Ten-year guarantee against rusting through on powder-coated compressed air tanks
Two-cylinder high-performance units made of gray cast iron for a long service life
Large fan wheel and a cooling air baffle on the cylinder for optimum cooling of the compressor
Quality electric motor with high starting torque
Electric motor equipped with motor protection switch
Aftercooler with cooling fins ensures a low tank inlet temperature and thus less moisture in the compressed air
Sturdy metal belt guard
400 volt models with phase inverter as standard for easy manual reversal of the direction of rotation
Compressed air tank equipped with safety valve, tank pressure gauge and condensate drain valve
Including all safety devices
Completely ready for connection
Filter pressure regulator with one pressure gauge for regulated compressed air cleaned of condensate, dirt and oil, second pressure gauge for tank pressure
Ten-year guarantee against rusting through on powder-coated compressed air tanks
Includes high-quality one composite safety coupling and high-quality CONDOR pressure switch
Flexible armored hose line with heat protection for long service life without vibration breakage
Ergonomic handle, rubber handle and transport handle on the compressed air tank for convenient transportation
Sturdy steering chassis with parking brake in combination with large, puncture-proof wheels for comfortable transportation
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
AIRPROFI 703/15 Silent on professionaalne vaikse tööga kolbkompressor, mis tagab kuni 15-barise töörõhu ning 650 l/min imemisvõimsuse. Efektiivne tootlikkus kuni 520 l/min ja mürasummutav korpus muudavad seadme sobivaks tööstus-, hooldus- ja töökojarakendustesse, kus on oluline nii suur rõhk kui ka madal müratase.
AIRPROFI DUO 853/2x100/10 on professionaalne statsionaarne kolbkompressor kahe 100-liitrise kuumtsingitud suruõhumahutiga. Võimas 10-barine suruõhujaam tagab kuni 680 l/min tootlikkuse ning sobib nõudlikuks tööstuslikuks kasutuseks.
Tehnilised andmed:
Kompressori tüüp: statsionaarne kolbkompressor
Kompressorisüsteem: HOS
Maksimaalne töörõhk: 10 bar
Paagi kogumaht: 200 l
Paakide arv: 2
Ühe paagi maht: 100 l
Paakide viimistlus: kuumtsingitud seest ja väljast
EasyTRONIC MICRO II electronic control with pressure sensor operation as standard, thus preventing motor overload, reducing wear and extending service life
With star-delta switch
High cooling effect and lower noise level due to thermostatically controlled radial fan
Operating hours counter records load and overrun times, thus ensuring compliance with maintenance intervals - Indication of maintenance requirements via automatic message
Rotation direction control for the motor avoids possible damage during commissioning or after a change of location
Screw compressor with wear-resistant Poly V ribbed belt drive and slide clamping system
Easy maintenance due to easily accessible elements
Optimum operating temperatures due to thermostatically controlled fan, optimum cooling air flow and generously dimensioned heat exchanger, thus longer service life, lower fluctuations in oil temperature than with thermostat control
Aftercooler as standard, thus less effort for drying and filtration of the generated compressed air
Small external dimensions, thus easy transport and installation
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
AIRPROFI 1253/500/10 H on professionaalne statsionaarne kolbkompressor 500-liitrise suruõhumahutiga, mis on loodud töökindlaks kasutamiseks tööstuses ja suurtes töökodades. Kaheastmeline kahe silindriga kompressoriplokk töötab madalatel pööretel, tagades vaikse töö, väikese vibratsiooni ja pika kasutusea. Tänu suurele tootlikkusele ning 500-liitrisele mahutile sobib seade suure suruõhuvajadusega rakendusteks.
AIRSTAR 853/270/10V on professionaalne vertikaalne rihmülekandega kolbkompressor, mis sobib kasutamiseks töökodades, tootmisettevõtetes ja hooldusüksustes, kus on oluline suur suruõhutootlikkus ning minimaalne põrandapinna kasutus. Kaheastmeline 2-silindriline malmist kompressoriüksus töötab madalatel pööretel, tagades suure töökindluse, väiksema kulumise ja pika kasutusea.
Tänu vertikaalsele 270-liitrisele surveanumale võtab kompressor vähem ruumi kui samaväärne horisontaalne mudel. Vahe- ja järeljahuti vähendavad suruõhu temperatuuri ning niiskusesisaldust, parandades kogu süsteemi töökindlust. Seade on varustatud kvaliteetse CONDOR rõhulüliti, mootorikaitselüliti ning kõigi vajalike ohutusseadmetega.
EasyTRONIC MICRO II electronic control with pressure sensor operation as standard, thus preventing motor overload, reducing wear and extending service life
With star-delta switch
High cooling effect and lower noise level due to thermostatically controlled radial fan
Operating hours counter records load and overrun times, thus ensuring compliance with maintenance intervals - Indication of maintenance requirements via automatic message
Rotation direction control for the motor avoids possible damage during commissioning or after a change of location
Screw compressor with wear-resistant Poly V ribbed belt drive and slide clamping system
Easy maintenance due to easily accessible elements
Optimum operating temperatures due to thermostatically controlled fan, optimum cooling air flow and generously dimensioned heat exchanger, thus longer service life, lower fluctuations in oil temperature than with thermostat control
Aftercooler as standard, thus less effort for drying and filtration of the generated compressed air
Small external dimensions, thus easy transport and installation
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
Uuenduslik LOGIN-juhtsüsteem 4,3-tollise puuteekraaniga tagab lihtsa kasutamise ja täieliku kontrolli kõigi funktsioonide üle.
Energiatõhus IE4-klassi mootor.
Mootori pöörlemissuuna kontroll aitab vältida kahjustusi käivitamisel või seadme asukoha muutmise järel.
Termostaadiga juhitav radiaalventilaator tagab tõhusa jahutuse ja madala mürataseme.
Optimaalne töötemperatuur ja väikesed õlitemperatuuri kõikumised tänu termostaadiga juhitavale radiaalventilaatorile, optimeeritud jahutusõhu voolule ning suure mõõduvaruga soojusvahetitele.
Järeljahuti vähendab toodetud suruõhu kuivatamise ja filtreerimise vajadust.
Standardvarustuses täht-kolmnurk käivitus.
Hooldussõbralik konstruktsioon võimaldab kõiki hooldust vajavaid komponente lihtsalt eemaldada ja paigaldada.
AIRPROFI 853/270/10 H on professionaalne statsionaarne kolbkompressor 270-liitrise paagi, 10-barise töörõhu ja kuni 680 l/min tootlikkusega. Kaheastmeline 2-silindriline kompressor sobib nõudlikuks tööstuslikuks kasutamiseks.
Absolutely Low maintenance drive with maximum energy efficiency thanks to directly coupled coaxial screw compressor
EasyTronic IV control as standard prevents motor overload, reduces wear and ensures a longer service life
High cooling effect and Lower noise level thanks to the thermostatically controlled radial fan
Longer service life of the device and less fluctuations in the oil temperature thanks to the thermostatically controlled fan, optimal cooling air flow and generously sized heat exchanger
Less effort for drying and filtering the generated compressed air Integrated aftercooler
Guaranteed compliance with the maintenance intervals by recording the load and run-on times via the operating hours counter
Display of the maintenance requirement via automatic notification
Avoiding damage during commissioning or after changing location through integrated direction of rotation control for the motor
Service-friendly due to optimal accessibility and simple assembly / disassembly of all components to be serviced
Easy transport and assembly due to small external dimensions
Monitoring as standard the engine and compressor speed through SpeedTronic Control control
Fifteen-year guarantee against rusting through on the inside and outside of hot-dip galvanized compressed air tanks
Energy savings with frequency-controlled compressors:
Based on the frequency converter technology, the delivery quantity of the compressor adapts to the actual consumption. The electronic control monitors the engine and compressor speed and keeps the network pressure constant. The user receives advanced cutting-edge technology in the smallest of spaces.
Your advantages:
Active energy saving
Ideal for frequently changing compressed air consumption
The speed-controlled compressor achieves maximum efficiency and keeps the network pressure constant, even when consumption fluctuates greatly.
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
Two-cylinder high-performance units made of gray cast iron for a long service life
Aftercooler with cooling fins ensures a low tank inlet temperature and thus less moisture in the compressed air
Ten-year guarantee against rusting through on powder-coated compressed air tanks
Two-cylinder high-performance units made of gray cast iron for a long service life
Large fan wheel and a cooling air baffle on the cylinder for optimum cooling of the compressor
Quality electric motor with high starting torque
Electric motor equipped with motor protection switch
Aftercooler with cooling fins ensures a low tank inlet temperature and therefore less moisture in the compressed air
Sturdy metal belt guard
400 volt models with phase inverter as standard for easy manual reversal of the direction of rotation
Compressed air tank equipped with safety valve, tank pressure gauge and condensate drain valve
Including all safety devices
Completely ready for connection
Filter pressure regulator with one pressure gauge for regulated compressed air cleaned of condensate, dirt and oil, second pressure gauge for tank pressure
Ten-year guarantee against rusting through on powder-coated compressed air tanks
Includes high-quality one composite safety coupling and high-quality CONDOR pressure switch
Flexible armored hose line with heat protection for long service life without vibration breakage
Ergonomic handle, rubber handle and transport handle on the compressed air tank for convenient transportation
Sturdy steering chassis with parking brake in combination with large, puncture-proof wheels for comfortable transportation
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
EasyTRONIC MICRO II electronic control with pressure sensor operation as standard, thus preventing motor overload, reducing wear and extending service life
With star-delta switch
High cooling effect and lower noise level due to thermostatically controlled radial fan
Operating hours counter records load and overrun times, thus ensuring compliance with maintenance intervals - Indication of maintenance requirement via automatic message
Rotation direction control for the motor avoids possible damage during commissioning or after a change of location
Screw compressor with wear-resistant Poly V ribbed belt drive and carriage tensioning system
Easy maintenance due to easily accessible elements
Optimum operating temperatures due to thermostatically controlled fan, optimum cooling air flow and generously dimensioned heat exchanger, thus longer service life, lower fluctuations in oil temperature than with thermostat control
Aftercooler as standard, thus less effort for drying and filtration of the generated compressed air
Small external dimensions, thus easy transport and installation
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
Aircraft ACS 3,5-10 2x100 KK kruvikompressor on varustatud kahe 100-liitrise suruõhumahuti, integreeritud külmkuivati ja 4 kW mootoriga. Tootlikkus kuni 380 l/min ning 10-barine töörõhk tagavad kvaliteetse suruõhu professionaalseks kasutamiseks.
Tehnilised andmed:
Kompressori tüüp: õliga määritud kruvikompressor
Paigaldusviis: statsionaarne
Mootori võimsus: 4 kW
Mootori sisendvõimsus: 4,2 kW
Toitepinge: 400 V
Faaside arv: 3
Võrgusagedus: 50 Hz
Maksimaalne töörõhk: 10 bar
Efektiivne õhutootlikkus: 380 l/min
Spetsiifiline võimsus: 13,4 kW/(l/min)
Mahutite kogumaht: 200 l
Mahutite konfiguratsioon: 2 × 100 l
Õhu väljavõte: 1/2"
Kaitse: 12 A
Voolutarve: 8,5 A
Mootori pöörlemiskiirus: 2880 p/min
Kaitseklass: IP54
Töörežiim: S1 pidevtöö
Mõõtmed (P × L × K): 1200 × 900 × 1250 mm
Kaal: umbes 201 kg
Müratase: 65 dB(A)
Juhtimine: K‑Tronic elektrooniline juhtsüsteem
Õli-soojusvaheti: jah
Õlisoojendus: jah
Suruõhu ettevalmistus: õlieralduskassett ja külmkuivati
Innovative LOGIN control with 4.3" touch screen for easy operation and full control of all functions.
Energy-efficient IE4 motor
Rotation direction control for the motor, prevents damage during start-up or after a change of stand location
High cooling effect and low noise level due to thermostatically controlled radial fan
Optimum operating temperature and low fluctuation of oil temperature due to thermostatically controlled radial fan, optimum cooling air flow and generously dimensioned heat exchangers
Aftercooler reduces the effort for drying and filtration of the generated compressed air
Star-delta switching as standard
Easy to service: simple removal and installation of all components requiring maintenance
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
