Kompressorid

• Absolute Low maintenance drive with maximum energy efficiency through direct-coupled coaxial screw compressors
• Standard EasyTronic IV control prevents engine overload, reduces wear and ensures a longer service life
• High cooling effect and lower noise level due to thermostatically controlled centrifugal fan
• Longer life of the device and lower fluctuations of the oil temperature thanks to thermostatically controlled fan, optimal cooling air flow and generously dimensioned heat exchanger
• Less effort for drying and filtration of the compressed air generated by integrated aftercooler
• Secured maintenance intervals by recording the load and follow-up times via operating hours counter
• Display of the maintenance requirement via automatic message
• Avoidance of damage during commissioning or after relocation due to integrated direction of rotation control for the motor
• Service-friendly due to optimal accessibility and easy assembly / disassembly of all serviceable components
• Easy transport and setup due to small outer dimensions
• Monitoring of engine and compressor speed by SpeedTronic Control

Based on the frequency converter technology, the delivery volume of the compressor adapts to the actual consumption. The electronic control monitors the engine and compressor speed and keeps the network pressure constant. The user receives advanced advanced technology in a small space.

• Active energy saving
• Ideal for frequently changing compressed air consumption
• The variable speed compressor achieves maximum efficiency and keeps the network pressure constant, even when consumption fluctuates widely.

• Innovative LOGIN control with 4.3" touch screen for easy operation and full control of all functions.
• Rotation direction control for the motor, prevents damage during start-up or after a change of location
• High cooling effect and low noise level due to thermostatically controlled radial fan
• Optimum operating temperature and low fluctuation of oil temperature due to thermostatically controlled centrifugal fan, optimum cooling air flow and generously dimensioned heat exchangers
• Aftercooler reduces the effort for drying and filtration of the generated compressed air
• Easy to service: simple removal and installation of all components requiring maintenance

• Larger speed/load range
• Larger delivery volume supply range
• Extremely energy efficient - up to 50% energy consumption savings compared to a "fixed speed" model
• Very quiet operation - only 64 dB

• Ideal for frequently changing compressed air consumption
• Compressor delivery rate adjusts to actual consumption
• Electronic control monitors motor and compressor speed and keeps line pressure constant even when consumption fluctuates widely
• Advanced and efficient cutting-edge technology in the smallest possible space

Aircraft A-K-MAX 11-08-500 K (IE3) on suure jõudlusega statsionaarne kruvikompressor, mis on varustatud 500-liitrise suruõhumahuti ja nutika LOGIN juhtsüsteemiga. Seade sobib tööstuslikuks kasutamiseks ning tagab stabiilse suruõhu tootmise, vaikse töö ja lihtsa hooldatavuse. LOGIN juhtimine võimaldab jälgida kõiki olulisi tööparameetreid 4,3-tollise puuteekraani kaudu ning ühendada ühtseks süsteemiks kuni kaheksa kompressorit.

Tehnilised andmed:

• Mootori võimsus: 11 kW
• Mootori efektiivsusklass: IE3
• Toitepinge: 400 V
• Võrgusagedus: 50 Hz
• Mootori pöörlemiskiirus: 3000 p/min
• Maksimaalne töörõhk: 8 bar
• Efektiivne tootlikkus: 1700 l/min
• Suruõhumahuti maht: 500 l
• Õhuühendus: 3/4"
• Müratase Lp: 67 dB(A)
• Õlitäite kogus: 8,05 l
• Ülekanne: otseühendus
• Kompressori tüüp: õliga määritav
• Paigaldusviis: statsionaarne
• Mõõtmed (P × L × K): 2000 × 730 × 1660 mm
• Kaal: 410 kg

Tehnilised andmed:

• Imivõime: 850 l/min.
• Tootlikkus: 660 l/min (6 bar juures).
• Maksimaalne töörõhk: 10 bar.
• Õhumahuti maht: 100 l.
• Mootori võimsus: 5,5 kW.
• Toitepinge: 400 V / 50 Hz.
• Surveastmeid: 2.
• Kaal: 120 kg.

• The two-stage compression 2-cylinder high-performance unit achieves a very low rotational speed, resulting in a particularly quiet and low-vibration run
• This ensures a longer life due to less wear
• Large fan wheel and a cooling air baffle on the cylinder for optimum cooling of the compressor
• Aftercooler with cooling fins and intercooler to the aftercooler ensure a low container inlet temperature and thus less moisture in the compressed air
• High quality electric motor with high torque
• Electric motor equipped with motor protection switch
• With high-quality CONDOR pressure switch
• Equipped with a pressure gauge for tank pressure and a ball valve on the compressed air tank
• Compressed air tank equipped with safety valve, container pressure gauge and condensate drain tap
• Ten-year rust-through warranty on powder-coated compressed air tank
• With all safety devices
• Fully wired
• Stable belt guard made of metal
• Including swinging elements
• Connection to grid by qualified electrician

• For continuous air demand and discontinuation operation
• Electronic control for reliability and efficiency
• Optimized oil separation system
• Integrated design of the compressor unit
• Lightweight, compact and quiet

• Just as mobile and compact as piston compressors, but with the great advantage of being able to generate compressed air continuously without any cooling pauses
• Can also be used in intermittent operation due to oil temperature control

Electronic temperature control for optimum oil temperature

• Optimum oil viscosity due to constant temperature, therefore also suitable for intermittent operation with frequent load changes
• Temperature control of the oil prevents condensation and minimizes wear
• Better energy efficiency compared to a piston compressor with the same delivery capacity
• Additional oil heat exchanger for cooling

K-Tronic electronic control system for reliability and efficiency

• Adjustment of the cut-in and cut-out pressure
• Direction of rotation control
• Monitoring and control of the oil temperature
• Maintenance interval display

Optimized oil separation system

• Effective oil pre-separation by gravity, as the oil sump is located at the lowest point
• Oil separator cartridge and oil filter cartridge easily accessible for maintenance

Integrated design of the compressor unit

• Convenience and high operational reliability thanks to integration and short connections of all key components on the compressor unit
• Maintenance-free direct drive
• Freewheel valve for load-free operation after reaching the set pressure

Lightweight, compact and quiet

• Can be used in mobile applications or where space is limited
• Highly efficient and low-noise fan
• Smooth-running compressor with low noise level

Area of application

• Small space requirement, ideal e.g. for car washes, biogas or fire extinguishing systems, small workshops and mobile use
• Also ideal as an auxiliary compressor to supplement existing systems, e.g. to cover compressed air base loads and peaks

• Large fan wheel and a cooling air baffle on the cylinder for optimum cooling of the compressor
• Aftercooler with cooling fins for low vessel inlet temperature and less moisture in the compressed air
• Sturdy metal belt guard
• "Made in Germany": vessel pressure gauge; filter pressure regulator with pressure gauge for regulated compressed air cleaned of condensate, dirt and oil
• Ten-year warranty against rust-through on powder-coated compressed air reservoir
• Including high-quality composite safety coupling and high-quality CONDOR pressure switch

• Two-cylinder high-performance units made of gray cast iron for a long service life.
• Large fan wheel and a cooling air baffle on the cylinder for optimal cooling of the compressor
• Quality electric motor with high starting torque
• Electric motor equipped with motor protection switch
• Aftercooler with cooling fins ensures a low tank inlet temperature and thus less moisture in the compressed air
• Sturdy metal belt guard
• Start-up capacitor and start-up relief valve ensure easy start-up on 230 volt models
• Container pressure gauge "Made in Germany
• Filter pressure regulator with pressure gauge "Made in Germany" for regulated compressed air cleaned of condensate, dirt and oil
• Ten-year warranty against rust-through on powder-coated compressed air reservoir
• Includes high quality composite safety coupling and high quality CONDOR pressure switch
• Large ergonomic handle
• Stable steering chassis with parking brake in combination with large, puncture-proof PU wheels
• Made in Europe

Tehnilised andmed:

• Mootori võimsus: 4,0 kW
• Toitepinge: 400 V / 50 Hz
• Maksimaalne töörõhk: 10 bar
• Efektiivne tootlikkus: 485 l/min
• Suruõhu väljund: 1/2"
• Õlikogus: 2,2 l
• Mahutite kogumaht: 200 l (2 × 100 l)
• Külmkuivati: standardvarustuses
• Eel- ja peenfilter: standardvarustuses
• Automaatne kondensaadieemaldaja (AMD): jah
• Õli/vee separaator: WOS 1
• Rõhukastepunkt: +3 °C (ümbritseva õhu temperatuuril 25 °C)
• Müratase: 61 dB(A)
• Mõõtmed (P × L × K): 1250 × 950 × 1430 mm
• Kaal: 228 kg

Varustus:

• Ribirihmülekandega kruvikompressor
• Külmkuivati koos eel- ja peenfiltriga
• Automaatne kondensaadieemaldaja (AMD)
• Õli/vee separaator WOS 1
• 2 × 100 l kuumtsingitud suruõhumahutit
• Turvaalus nelja vibratsioonisummutava elemendiga

• Maintenance-free direct drive
• Low space requirements and energy costs
• Low noise level
• Generously dimensioned cooler
• Easy installation and accessibility of all maintenance positions

Coaxial screw-type compressor with maintenance-free drive and maximum energy efficiency in all pressure ranges. Low compressor speeds and low load on the bearings of the patented direct drive ensure a very long service life.

• Prevents motor overload, reduces wear and makes for a longer service life
• Monitoring of operating hours, temperature and motor overload
• Phase sequence relays control the direction of rotation of the motor, thereby avoiding possible damage during commissioning or after relocation

• Low-noise centrifugal fan guarantees optimal operating temperatures even under unfavourable conditions
• Thermostatically and electronically controlled fan and generously sized heat exchanger result in a longer service life and less fluctuation in oil temperature

• Low noise, suitable for deployment in any work environment
• Small footprint facilitates transport and deployment
• Service-friendly thanks to optimum accessibility and easy removal and installation of all components that require maintenance
• All air and oil lines are made of heat-resistant rubber
• Equipped with a star delta circuitry as factory standard
• Ready to connect with all fittings and safety equipment

• More reliable compressed air system without costly downtimes and production delays while simultaneously ensuring product quality
• Fully integrated into the housing
• Ready for use without installation overhead
• Equipped with control panel and time-controlled condensate drain

Peamised eelised:

• Statsionaarne kolbkompressor professionaalseks kasutamiseks
• Integreeritud külmkuivati kuiva suruõhu tootmiseks
• Kahe silindriga malmist HOS-kompressoriagregaat
• Vaikne ja vähese vibratsiooniga töö
• Vahe- ja järeljahuti niiskuse vähendamiseks suruõhus
• Madalad pöörded tagavad pikema kasutusea
• Energiasäästlik hammasrihmülekanne
• Kvaliteetne CONDOR automaatne rõhulüliti
• Mootori kaitselüliti ja käivituskoormuse vabastusventiil
• Kuumtsingitud suruõhumahuti 15-aastase korrosioonigarantiiga
• Täisautomaatne sisse- ja väljalülitus

Tehnilised andmed:

• Tootja: Aircraft
• Mudel: AIRPROFI 703/270/10 VK
• Tootjakood: 2024712K
• Kompressori tüüp: statsionaarne kolbkompressor külmkuivatiga
• Silindrite arv: 2
• Kompressori agregaat: HOS malmist kõrgsurveagregaat
• Mahuti maht: 270 l
• Maksimaalne töörõhk: 10 bar
• Jahutus: vahe- ja järeljahuti ning suur jahutusventilaator
• Ülekanne: hammasrihmülekanne
• Elektrimootor: mootori kaitselülitiga
• Rõhulüliti: CONDOR
• Mahuti: sise- ja välispidiselt kuumtsingitud
• Korrosioonigarantii: 15 aastat

Sobib kasutamiseks:

• Autotöökodades
• Tootmisettevõtetes
• Metalli- ja puidutööstuses
• Pneumaatiliste tööriistade toiteks
• Suruõhusüsteemides, kus on oluline kuiv suruõhk

• Extremely quiet due to sound-insulated housing and additional silencer on the intake filter
• Two-cylinder high-performance unit made of grey cast iron with low speed guarantee particularly quiet and low-vibration operation -> less wear - longer service life
• Large fan impeller on the compressor and temperature-controlled radial fan on the housing ensure optimum cooling of the entire interior
• Equipped with glycerine pressure gauge, operating hours counter and error display via LED lights

• Extremely quiet due to sound-insulated housing and additional silencer on the intake filter
• Suitable for installation even in noise-sensitive areas and the direct working environment
• Two-cylinder high-performance unit made of grey cast iron with low speed warrantys particularly quiet and low-vibration operation: less wear and longer service life
• Large fan impeller on the compressor and temperature-controlled radial fan on the housing ensure optimum cooling of the entire interior
• Inter- and aftercooler as well as an additional air duct between motor and compressor reduce condensate formation
• High-quality Condor pressure switch
• Equipped with glycerine pressure gauge, hour meter and fault indication via LED lights
• Quality electric motor with motor protection switch and start-up relief
• Integrated phase monitoring
• Facility for easy tensioning of the V-belt
• Service-friendly design
• Ready for connection with all fittings and safety devices
• Models with compressed air tank: Galvanised air reservoir inside and out with 15-year warranty against rusting through

Vastupidav ja suure jõudlusega statsionaarne kolbkompressor professionaalseks kasutamiseks töökodades ja tootmisettevõtetes. Kaheastmeline malmist kompressoriplokk, 270-liitrine mahuti ning kuni 520 l/min tootlikkus tagavad piisava suruõhuvaru ka nõudlike pneumotööriistade jaoks. Madal pöörlemiskiirus vähendab kulumist ja mürataset, samas kui tõhus jahutussüsteem ning kvaliteetsed komponendid tagavad pika tööea ja usaldusväärse töö.

Tehnilised andmed:

• Tootja: Aircraft
• Mudel: AIRSTAR 703/270/10 V
• Tootekood: 2028750
• Maksimaalne töörõhk: 10 bar
• Mahuti maht: 270 l
• Imivõimsus: 650 l/min
• Efektiivne tootlikkus (täitejõudlus): 520 l/min
• Kompressoriastmeid: 2
• Silindreid: 2
• Mootori võimsus: 4,0 kW
• Toitepinge: 400 V / 50 Hz, 3-faasiline
• Kompressoriploki pöörlemiskiirus: 950 p/min
• Müratase (helirõhutase): 80 dB(A)
• Õhu väljavõte: ¾"
• Mõõtmed (P × L × K): 720 × 720 × 1770 mm
• Netokaal: 139 kg
• Brutokaal: 166 kg

• Space-saving single compressor with ribbed belt drive
• With control ETM II including direction of rotation control
• Especially suitable for companies that have a continuous air requirement, but want a compact unit with a reduced noise level and low operating costs
• Standard supersonic insulation allows installation in sensitive rooms
• Intensive cooling warrantys operational safety and good air quality
• Standard with star-delta connection
• Ideal also suitable for supplementing existing systems, eg for covering the compressed air base load
• Standard with thermal motor protection, oil temperature monitoring (max 110 °C) and operating hours counter, ensuring high operational safety
• Service-friendly due to optimal accessibility and easy disassembly and assembly of all important components
• Fifteen-year rust-through warranty on inside and outside hot-dip galvanized compressed air tank

• Innovative LOGIN control with 4.3" touch screen for easy operation and full control of all functions.
• Rotation direction control for the motor, prevents damage during start-up or after a change of location
• High cooling effect and low noise level due to thermostatically controlled radial fan
• Optimum operating temperature and low fluctuation of oil temperature due to thermostatically controlled centrifugal fan, optimum cooling air flow and generously dimensioned heat exchangers
• Aftercooler reduces the effort for drying and filtration of the generated compressed air
• Easy to service: simple removal and installation of all components requiring maintenance

• Larger speed/load range
• Larger delivery volume supply range
• Extremely energy efficient - up to 50% energy consumption savings compared to a "fixed speed" model
• Very quiet operation - only 64 dB

• Ideal for frequently changing compressed air consumption
• Compressor delivery rate adjusts to actual consumption
• Electronic control monitors motor and compressor speed and keeps line pressure constant even when consumption fluctuates widely
• Advanced and efficient cutting-edge technology in the smallest possible space

• Kompressori tüüp: bensiinimootoriga kaheastmeline kolbkompressor
• Mootor: Honda GX390
• Maksimaalne mootori võimsus: 8,7 kW
• Silindrite arv: 2
• Kompressori astmeid: 2
• Imitootlikkus: 900 l/min
• Efektiivne tootlikkus: 740 l/min
• Maksimaalne töörõhk: 15 bar
• Mahuti maht: 50 l
• Suruõhu väljundid: 3 × 1/2"
• Rõhu reguleerimisvahemik: 2–15 bar
• Osakestefilter: 20 µm

Integreeritud generaator:

• Nimipinge: 230 / 400 V
• Pidev võimsus: 3,0 / 6,0 kVA
• Maksimaalne võimsus: 3,5 / 7,0 kVA
• Pistikud: CEE 230 V / 16 A ja CEE 400 V / 16 A
• Generaatori kaitseklass: IP23

Mõõtmed ja kaal:

• Mõõtmed (P × L × K): 1250 × 600 × 1150 mm
• Kaal: 186 kg

• Kütusepaak: 6,1 l
• Tööaeg 50% koormusel: 4,5 h
• Tööaeg 100% koormusel: 2,8 h
• Kütusekulu 75% koormusel: 3 l/h
  
  
  

• Kompressor ja generaator ühes seadmes.
• Elektriline ja käsikäivitus.
• Madal kütusekulu ning töökindel Honda GX390 mootor.
• Suur tootlikkus kuni 740 l/min töörõhul kuni 15 bar.
• Sobib ehitusobjektidele ja mobiilseks kasutamiseks ilma elektrivõrguta

• EasyTRONIC MICRO II electronic control with pressure sensor operation as standard, thus preventing motor overload, reducing wear and extending service life
• With star-delta switch
• High cooling effect and lower noise level due to thermostatically controlled radial fan
• Operating hours counter records load and overrun times, thus ensuring compliance with maintenance intervals - Indication of maintenance requirements via automatic message
• Rotation direction control for the motor avoids possible damage during commissioning or after a change of location
• Screw compressor with wear-resistant Poly V ribbed belt drive and slide clamping system
• Easy maintenance due to easily accessible elements
• Optimum operating temperatures due to thermostatically controlled fan, optimum cooling air flow and generously dimensioned heat exchanger, thus longer service life, lower fluctuations in oil temperature than with thermostat control
• Aftercooler as standard, thus less effort for drying and filtration of the generated compressed air
• Small external dimensions, thus easy transport and installation

• For continuous air demand and discontinuation operation
• Electronic control for reliability and efficiency
• Optimized oil separation system
• High-quality equipment
• Smooth and quiet

• Just as mobile and compact as piston compressors, but with the great advantage of being able to generate compressed air continuously without any cooling pauses
• Can also be used in intermittent operation due to oil temperature control

Electronic temperature control for optimum oil temperature

• Optimum oil viscosity due to constant temperature, therefore also suitable for intermittent operation with frequent load changes
• Temperature control of the oil prevents condensation and minimizes wear
• Better energy efficiency compared to a piston compressor with the same delivery capacity
• Additional oil heat exchanger for cooling

K-Tronic electronic control system for reliability and efficiency

• Adjustment of the cut-in and cut-out pressure
• Direction of rotation control
• Monitoring and control of the oil temperature
• Maintenance interval display

Optimized oil separation system

• Effective oil pre-separation by gravity, as the oil sump is located at the lowest point
• Oil separator cartridge and oil filter cartridge easily accessible for maintenance

Integrated design of the compressor unit

• Convenience and high operational reliability thanks to integration and short connections of all key components on the compressor unit
• Maintenance-free direct drive
• Freewheel valve for load-free operation after reaching the set pressure

Lightweight, compact and quiet

• Can be used in mobile applications or where space is limited
• Highly efficient and low-noise fan
• Smooth-running compressor with low noise level

High-quality equipment

• Compressed air tank hot-dip galvanized inside and out, 15-year guarantee on the tank against rusting through
• Large, puncture-proof PU foam wheels for comfortable transportation
• Flexible armored hose line with heat protection prevents vibration fractures

• Space-saving single compressor with ribbed belt drive
• With control ETM II including direction of rotation control
• Especially suitable for companies that have a continuous air requirement, but want a compact unit with a reduced noise level and low operating costs
• Standard supersonic insulation allows installation in sensitive rooms
• Intensive cooling warrantys operational safety and good air quality
• Standard with star-delta connection
• Ideal also suitable for supplementing existing systems, eg for covering the compressed air base load
• Standard with thermal motor protection, oil temperature monitoring (max 110 °C) and operating hours counter, ensuring high operational safety
• Service-friendly due to optimal accessibility and easy disassembly and assembly of all important components
• Fifteen-year rust-through warranty on inside and outside hot-dip galvanized compressed air tank

• The two-stage compression 2-cylinder high-performance unit enables a very low speed, resulting in a particularly quiet and low-vibration run
• The large fan ensures optimal cooling
• Intercooler and aftercooler ensure a low container inlet temperature and thus reduce condensation
• High quality electric motor with high torque
• Electric motor equipped with motor protection switch
• Fifteen-year rust-through warranty on inside and outside hot-dip galvanized compressed air tank
• 200, 270 and 500 liter containers according to AD 2000
• With high-quality CONDOR pressure switch
• Flexible armored hose line with heat protection prevents vibration breakage
• Star-delta switch with operating hours counter from 7.5 kW models
• High quality finned intake filter from Airprofi 1003/500/10 H
• Ready for connection with all fittings

• Particularly space-saving with 100 l containers

Recommended accessories:

• For oil-water separation
• Important notes on condensate treatment in the section on compressed air preparation

• For separating condensate and solid impurities with particles up to 1 μm
• Compressed air quality according to ISO 8573-1
• As a pre-filter in front of the refrigeration dryer

• At the compressed air tank
• No unnecessary pressure loss during condensate drainage

• With integrated automatic steam trap
• Pressure dew point at 5 °C, ambient temperature 25 °C, atmospheric dew point at -22 °C

• Maximum, robust equipment and best quality at a reasonable price
• Fully automatic on-off operation
• With all safety devices
• Completely ready for connection

Quality electric motor

• Quality electric motor with high starting torque is equipped with a motor protection switch
• Starting capacitor and starting relief valve ensure easy starting
• Phase inverter as standard for easy manual reversal of the direction of rotation

Compressed air compression via high-performance HOS unit

• The start-up relief valve ensures easy and pressureless start-up
• The two-cylinder high-performance unit made of gray cast iron and the low speed warranty particularly quiet and low-vibration running and a long service life
• This ensures an even longer service life due to even less wear and tear
• High-quality compressor with optimum lubrication for a long service life and high reliability
• Equipped with high quality intake filter
• The aftercooler with large cooling fins ensures a low boiler inlet temperature and thus less moisture in the compressed air, which protects the air tools
• Additional intercooler to the aftercooler
• Corrosion-free valve plates for improved heat dissipation and compressor longevity
• The large fan impeller and a cooling air baffle on the cylinder ensure optimum cooling of the compressor
• A sturdy metal belt guard ensures optimum protection of the components and a high level of user safety
• Compressed air supply to the boiler via flexible armored hose line with heat protection prevents vibration breakage

High quality drive belt

• Powerful and economical drive
• The toothed drive belt facilitates start-up, improves running smoothness and power transmission and reduces power consumption by up to 30%.
• Sturdy metal belt guard

Comfort safety coupling - The advantages.

• Comfort safety couplings from AIRCRAFT as the first manufacturer to be used in series production
• Two separate locking systems for maximum working safety
• Dangerous whipping of the hose line is prevented

Comfortable and safe to transport and set up

• Ergonomically extended handle for comfortable transport in an almost upright position - strain on the back due to lifting is avoided
• Puncture-proof PU foam wheels and stable steering chassis with parking brake allow easy transport
• The parking brake prevents both turning and rolling movement of the wheels and ensures optimal standing of the compressor
• Practical second transport handle on the boiler, which facilitates carrying the compressor

High quality boiler with durable rust protection

• AIRCRAFT is the first manufacturer to equip the AIRPROFI series compressors with hot-dip galvanized tanks inside and outside as standard
• AIRPROFI series boilers therefore come with a 15-year warranty against rust-through.