Lehtmetalli tööpingid

• heavy welded steel construction
• horizontal and vertical work possibility
• lower rollers driven by a motor
• Rolls are hardened
• Steel shafts, hardened and ground
• Delivery via upper roller
• lateral straightening rollers, infinitely adjustable
• powerful 400 volt engine
• Left / right rotation by foot pedal

• Sliding upper beam with adjustable flat guides
• Manual backgauge with 550 mm travel range
• Solid 90° side fence with 1000 mm length, T-slot, tilting cam and scale
• LED cutting line lighting and slotted holes in the top cover for an optimum view of the cutting edge for cutting on tear
• High-quality, rotatable knives suitable for cutting stainless steel Heavy-duty hold-down beam with material-friendly polyurethane inserts suitable for cutting stainless steel
• Heavy-duty hold-down bar with material-friendly polyurethane inserts
• Rear area protected by light barrier
• Operation via mobile foot pedal console with emergency stop

• With foot control
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp-bending rail
• Seriesßig with manual adjustment of the bending angle
• Especially low-maintenance
• Clamping of the workpiece is motor-driven
• SH models with high, segmented cast base tools
• DUO models with continuous sharp-bending rail and high, segmented goat foot tools

• Standard tools hardened
• Sharp bending bar and bending bar hardened
• Segmented tools and bending bar hardened
• Segmented cast foot tools and bending bar hardened

• Heavy and stable welded construction
• Punching table with scale and stops
• Extra large projection with 625 mm
• Time-saving, stepless stroke adjustment
• With a powerful engine
• Stepless adjustment of the stroke
• Punching saddle with second holder for machining UPN profiles
• Stamps and dies no. 1, no. 2, no. 3, no. 30, no. 45, no. 60 can be used with the standard delivery scope of the machine. Use of punch and die no. 4 and no. 80 optional

• Please specify when ordering material to be edited!

BSS 1250 E käsigiljotiin professionaalseks lehtmetalli lõikamiseks. Töölaius 1250 mm, lõikevõime kuni 1,5 mm, tugev malmkonstruktsioon, reguleeritav külgpiirik ja suur töölaud täpseks ning efektiivseks tööks.

Tehnilised andmed:

• Töölaius: 1250 mm
• Maksimaalne lõikevõime terasel (400 N/mm²): 1,5 mm
• Tagapiiriku reguleerimisulatus: kuni 550 mm
• Töölaua mõõtmed: 600 × 1530 mm
• Töölaua kõrgus: 750 mm
• Mõõtmed (P × L × K): 2450 × 1000 × 1820 mm
• Netokaal: 480 kg
• Konstruktsioon: raske malmkonstruktsioon
• Juhtimine: käsitsi

Komplekti sisu:

• BSS 1250 E käsigiljotiin
• Standardne survetala
• Eemaldatav nurgapiirik töölaul
• Käsivändaga reguleeritav külgpiirik
• Integreeritud suur malmist töölaud

• Heavy, robust welded construction
• Splitter-guided upper beam with adjustable flat guides
• Manual cutting gap adjustment at the front of the machine
• LED cutting line illumination and elongated holes in the top cover for an optimal view of the cutting edge and for cutting on tear-off
• Solid 90° side stop with 1000 mm length, T-slot, tilting cam and scale
• Two solid sheet support arms with T-slots and tilting cams
• Motorized, NC-controlled backgauge with 750 mm travel range
• Backgauge drive with frequency converter, motor with brake and recirculating ball screws
• High-quality, rotatable knives suitable for cutting stainless steel
• Heavy hold-down beam with gentle rubber inserts
• Rear area protected by light curtain
• Operation via mobile foot pedal console with emergency stop

• Robust machine design
• Manual and automatic mode selectable
• Easy tool change through quick change adapter

• Durable construction of tools and tool guides made of high-quality, hardened steel
• Manual operation via two foot pedals for flow and return
• Automatic mode by programming the front and rear travel end points
• Easy to change the die by quick change recording
• Foot pedal with digital display and emergency stop switch

Hydraulic oil not included

• With foot control
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp-bending rail
• Seriesßig with manual adjustment of the bending angle
• Especially low-maintenance
• Clamping of the workpiece is motor-driven
• SH models with high, segmented cast base tools
• DUO models with continuous sharp-bending rail and high, segmented goat foot tools

• Standard tools hardened
• Sharp bending bar and bending bar hardened
• Segmented tools and bending bar hardened
• Segmented cast foot tools and bending bar hardened

• Robust machine design
• Manual and automatic mode selectable
• Easy tool change through quick change adapter

• Durable construction of tools and tool guides made of high-quality, hardened steel
• Manual operation via two foot pedals for flow and return
• Automatic mode by programming the front and rear travel end points
• Easy to change the die by quick change recording
• Foot pedal with digital display and emergency stop switch

Hydraulic oil not included

• Heavy and stable welded construction
• Punching table with scale and stops
• Extra large projection with 625 mm
• Time-saving, stepless stroke adjustment
• With a powerful engine
• Stepless adjustment of the stroke
• Punching saddle with second holder for machining UPN profiles
• Stamps and dies no. 1, no. 2, no. 3, no. 30, no. 45, no. 60 can be used with the standard delivery scope of the machine. Use of punch and die no. 4 and no. 80 optional

• Please specify when ordering material to be edited!

• Foot operated
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp bending bar
• In series with manual adjustment of the bending angle
• Especially low-maintenance
• The workpiece is clamped by a motorized mechanism
• S-models with segmented upper tools
• SH-models with high, segmented casting foot tools

• Other models
• Standard tools hardened
• Hardened sharp bending bar and bending bar
• Segmented tools and hardened bending bar
• Segmented casting foot tools and bending bar hardened

MTBS 1350-30 M mootoriga giljotiin täpseks lehtmetalli lõikamiseks. Töölaius 1350 mm, lõikevõime kuni 3 mm terasel, tagapiirik 750 mm, LED-lõikejoone valgustus ja võimas 3 kW mootor.

Tehnilised andmed:

• Töölaius: 1350 mm
• Maksimaalne lõikevõime terasel (400 N/mm²): 3 mm
• Maksimaalne lõikevõime roostevabal terasel (700 N/mm²): 1,5 mm
• Lõigete arv minutis: 40
• Lõikenurk: 2,2°
• Tagapiiriku reguleerimisulatus: kuni 750 mm
• Mootori võimsus: 3 kW
• Toitepinge: 400 V / 50 Hz
• Mõõtmed (P × L × K): 1920 × 1920 × 1110 mm
• Netokaal: 1150 kg
• Roostevabast terasest töölaua tugi: jah

Komplekti sisu:

• MTBS 1350-30 M mootoriga giljotiin
• Manuaalne tagapiirik (reguleerimisulatus kuni 750 mm)
• 90° külgpiirik pikkusega 1000 mm
• Kaks tugevdatud lehetuge T-soone ja kallutuskambriga
• LED-lõikejoone valgustus
• Jalapedaal koos hädaseiskamisfunktsiooniga
• Pööratavad lõiketerad roostevaba terase lõikamiseks
• Survetala pehmete kummist sisestustega
• Valgusbarjääriga kaitstud tagumine ala

• Foot operated
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp bending bar
• In series with manual adjustment of the bending angle
• Especially low-maintenance
• The workpiece is clamped by a motorized mechanism
• S-models with segmented upper tools
• SH-models with high, segmented casting foot tools

• Other models
• Standard tools hardened
• Hardened sharp bending bar and bending bar
• Segmented tools and hardened bending bar
• Segmented casting foot tools and bending bar hardened

Metallkraft AKM 200-4 H hüdrauliline väljalõikepink kiireks lehtmetalli ristkülikukujuliseks väljalõikamiseks. Lõikepaksus kuni 4 mm, lõikeala 197 × 197 mm, 14,7 t lõikejõud ja jalapedaaliga juhtimine. Sobib professionaalseks metallitööks.

Tehnilised andmed:

• Lõikenurk: 90°
• Maksimaalne lõikepaksus (400 N/mm²): 4 mm
• Maksimaalne lõikepaksus (600 N/mm²): 2 mm
• Lõikejõud: 14,7 t
• Lõikepikkus: 197 mm
• Lõikelaius: 197 mm
• Löökide arv: 20 lööki/min
• Mootori võimsus: 3 kW
• Toitepinge: 400 V
• Sagedus: 50 Hz
• Töörõhk: 120 bar
• Õlipaagi maht: 45 l
• Töölaua kõrgus: 950 mm
• Töölaua pikkus: 690 mm
• Töölaua laius: 700 mm
• Masina mõõdud (P × L × K): 890 × 780 × 1170 mm
• Netokaal: 548 kg

Komplekti sisu:

• Hüdrauliline väljalõikepink Metallkraft AKM 200-4 H
• Alumine terakomplekt terasele ja roostevabale terasele
• Ülemine terakomplekt terasele ja roostevabale terasele
• Jalapedaal
• Kasutusjuhend

• For use in industry and trade
• Heavy and stable cast iron construction
• Asymmetrical 3-roller system
• Upper roller swung out, thereby easy removal of the finished workpiece
• Easily adjustable upper and lower roller
• The foot control leaves both hands free for the material supply
• User-friendly
• Powerful 400 volt engine
• Optionally available: hardened rollers

• When ordering, please specify the type of material to be processed!
• All accessories only possible ex works.

• Foot operated
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp bending bar
• In series with manual adjustment of the bending angle
• Especially low-maintenance
• The workpiece is clamped by a motorized mechanism
• S-models with segmented upper tools
• SH-models with high, segmented casting foot tools

• Other models
• Standard tools hardened
• Hardened sharp bending bar and bending bar
• Segmented tools and hardened bending bar
• Segmented casting foot tools and bending bar hardened

• With foot control
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp-bending rail
• Seriesßig with manual adjustment of the bending angle
• Especially low-maintenance
• Clamping of the workpiece is motor-driven
• SH models with high, segmented cast base tools
• DUO models with continuous sharp-bending rail and high, segmented goat foot tools

• Standard tools hardened
• Sharp bending bar and bending bar hardened
• Segmented tools and bending bar hardened
• Segmented cast foot tools and bending bar hardened

• Powerful and low-noise drive via LENZE gear motors with brake
• Compact, heavy-duty, stress-free welded steel design
• Acute bending rail made of tool steel C50 at the clamping beam
• Continuous, replaceable bed support made of tool steel C50
• Continuous bending rail made of tool steel C50 at the bending beam
• Clamping beam pressure controlled automatically via motor current absorption
• Clamping beam driven via generously dimensioned trapezoidal thread spindles
• Bending angle adjustment PT 1 via potentiometer on the machine’s front side (right)
• Manual granular adjustment of the bending beam with help of a scale
• Manual crowning via pressure screws in the bending beam
• Remote foot switch with emergency stop function
• All moving parts with low-maintenance bearings
• Electrical components by Schneider or Omron
• SH-models with high, segmented crowbar tools
• Stock equipment as standard with: hardened tools, control PT 1, back gauge 6-760mm with hand wheel, measuring device and stop fingers, quick clamping for top tool
• Quality Made in Europe
• Available on request: Models in DUO design featuring full-width acute bending rail and segmented crowbar tools

Tehnilised andmed:

• Maksimaalne töölaius: 2520 mm
• Maksimaalne ava ülemise ja alumise tala vahel: 90 mm
• Segmentide mõõdud: 25 / 30 / 35 / 40 / 45 / 50 / 75 / 100 / 150 / 220 / 250 / 500 / 500 mm
• Painutusvõime terasel (400 N/mm²): 3,5 mm
• Painutusvõime terasel (700 N/mm²): 2,6 mm
• Painutusvõime alumiiniumil: 4,2 mm
• Kinnitustala mootori võimsus: 1,1 kW
• Painutustala mootori võimsus: 4,0 kW
• Pikkus: 3620 mm
• Laius: 1100 mm
• Kõrgus: 1560 mm
• Kaal: 4500 kg

Komplekti sisu:

• PT 1 juhtsüsteem painutusnurga seadistamiseks
• Kõrged segmenteeritud kitsejala-tüüpi tööriistad (SH)
• Jalglüliti hädaseiskamisfunktsiooniga
• Integreeritud painutustala peenseadistus skaalaga
• Kasutusvalmis motoriseeritud painutuspink

• Punching station, flat steel shears, angle steel shears, sectional steel shears, available with notching station starting from HPS 45S
• DS series with two working cylinders and two foot pedals for simultaneous use with punching station and sectional steel shears
• Stepless adjustment of the stroke
• Larger reach for punching station with 620 mm optional, available from HPS 55DS
• Heavy and rigid welded construction
• Standard with notching knife starting from HPS 45S
• With powerful 400 Volt motor
• V-notching knife, oversized punching device and larger throat depth for punching station available on request
• Two-stage foot pedal for inching operation
• Stamps and dies No. 1, No. 2, No. 3, No. 30, No. 45, No. 60 can be used with the standard delivery scope of the machine. Use of punch and die No. 4 and No. 80 optional (except HPS 40S)

Advantages of punching over drilling:

• High time savings - cycle times
• No chips
• No cooling

Note:

• All hydraulic sectional shears are delivered with oil