Punching station, flat steel shears, angle steel shears, sectional steel shears, available with notching station starting from HPS 45S
DS series with two working cylinders and two foot pedals for simultaneous use with punching station and sectional steel shears
Stepless adjustment of the stroke
Larger reach for punching station with 620 mm optional, available from HPS 55DS
Heavy and rigid welded construction
Standard with notching knife starting from HPS 45S
With powerful 400 Volt motor
V-notching knife, oversized punching device and larger throat depth for punching station available on request
Two-stage foot pedal for inching operation
Stamps and dies No. 1, No. 2, No. 3, No. 30, No. 45, No. 60 can be used with the standard delivery scope of the machine. Use of punch and die No. 4 and No. 80 optional (except HPS 40S)
Advantages of punching over drilling:
High time savings - cycle times
No chips
No cooling
Note:
All hydraulic sectional shears are delivered with oil
Punching station, flat steel shears, angle steel shears, sectional steel shears, available with notching station starting from HPS 45S
DS series with two working cylinders and two foot pedals for simultaneous use with punching station and sectional steel shears
Stepless adjustment of the stroke
Larger reach for punching station with 620 mm optional, available from HPS 55DS
Heavy and rigid welded construction
Standard with notching knife starting from HPS 45S
With powerful 400 Volt motor
V-notching knife, oversized punching device and larger throat depth for punching station available on request
Two-stage foot pedal for inching operation
Stamps and dies No. 1, No. 2, No. 3, No. 30, No. 45, No. 60 can be used with the standard delivery scope of the machine. Use of punch and die No. 4 and No. 80 optional (except HPS 40S)
Advantages of punching over drilling:
High time savings - cycle times
No chips
No cooling
Note:
All hydraulic sectional shears are delivered with oil
Punching station, flat steel shears, angle steel shears, sectional steel shears, available with notching station starting from HPS 45S
DS series with two working cylinders and two foot pedals for simultaneous use with punching station and sectional steel shears
Stepless adjustment of the stroke
Larger reach for punching station with 620 mm optional, available from HPS 55DS
Heavy and rigid welded construction
Standard with notching knife starting from HPS 45S
With powerful 400 Volt motor
V-notching knife, oversized punching device and larger throat depth for punching station available on request
Two-stage foot pedal for inching operation
Stamps and dies No. 1, No. 2, No. 3, No. 30, No. 45, No. 60 can be used with the standard delivery scope of the machine. Use of punch and die No. 4 and No. 80 optional (except HPS 40S)
Advantages of punching over drilling:
High time savings - cycle times
No chips
No cooling
Note:
All hydraulic sectional shears are delivered with oil
MTBS 2550-40 T NC-juhitav giljotiin professionaalseks lehtmetalli lõikamiseks. Töölaius 2550 mm, lõikevõime kuni 4 mm terasel, pneumaatiline lehetoestus, digitaalne tagapiirik, ees- ja tagasuunaline väljastus ning 7,5 kW ajam.
Tehnilised andmed:
Töölaius: 2550 mm
Maksimaalne lõikevõime terasel (400 N/mm²): 4,0 mm
Maksimaalne lõikevõime terasel (450 N/mm²): 4,0 mm
Maksimaalne lõikevõime roostevabal terasel (700 N/mm²): 2,5 mm
Lõigete arv minutis: 38
Lõikenurk: 1,8°
Tagapiiriku reguleerimisulatus: kuni 750 mm
Tagapiiriku kiirus: 28 mm/s
Tagapiiriku mootor: 0,37 kW
Lõikevahe reguleerimine: 0,05–0,4 mm
Mootori nimivõimsus: 7,5 kW
Sisendvõimsus: 8,45 kW
Koguvõimsus: 9 kW
Toitepinge: 400 V / 50 Hz
Õhukulu tsükli kohta: 13 l
Lehetoestuste arv: 3
Töölaua mõõdud: 2718 × 530 mm
Mõõtmed (P × L × K): 3320 × 2360 × 1280 mm
Netokaal: 3050 kg
Täht-kolmnurk käivitus: jah
Komplekti sisu:
MTBS 2550-40 T giljotiin
NC-juhitav tagapiirik Maper HT071 digitaalnäiduga
Pneumaatiline lehetoestus
Esi- ja tagasuunaline materjali väljastussüsteem
1000 mm külgpiirik mõõteskaala ja T-soonega
Kolm lehetoestust T-soontega
Roostevabast terasest töölauakate koos ülekandekuulidega
Acute bending rail made of tool steel C50 at the clamping beam
Continuous, replaceable bed support made of tool steel C50
Continuous bending rail made of tool steel C50 at the bending beam
Clamping beam pressure controlled automatically via motor current absorption
Clamping beam driven via generously dimensioned trapezoidal thread spindles
Bending angle adjustment PT 1 via potentiometer on the machine’s front side (right)
Manual granular adjustment of the bending beam with help of a scale
Manual crowning via pressure screws in the bending beam
Remote foot switch with emergency stop function
All moving parts with low-maintenance bearings
Electrical components by Schneider or Omron
SH-models with high, segmented crowbar tools
Stock equipment as standard with: hardened tools, control PT 1, back gauge 6-760mm with hand wheel, measuring device and stop fingers, quick clamping for top tool
Quality Made in Europe
Available on request: Models in DUO design featuring full-width acute bending rail and segmented crowbar tools
Powerful and quiet drive via LENZE gear motors with brake
Compact, heavy and stress-free welded steel construction
Sharp bending rail made of tool steel C50 at the clamping cheek
Continuous, exchangeable bed support made of tool steel C50
Continuous bending rail made of tool steel C50 at the bending beam
Automatic pressure regulation of the clamping cheek via motor current pick-up
Drive of the clamping cheek via generously dimensioned trapezoidal thread spindles
Bending angle adjustment PT 1 via potentiometer on the machine front (right)
Manual fine adjustment of bending beam with scale
Manual crowning via pressure screws in the bending beam
Foot remote control with emergency stop function
All moving parts with low-maintenance bearings
Electrical components from Schneider or Omron
SH-models with high, segmented goat's foot tools
Quality Made in Europe
Available on request: Models in DUO design with continuous sharp bending rail and segmented goad foot tools, standard tools hardened, sharp bending rail and bending bar hardened, segmented tools and bending bar hardened, segmented goad foot tools and bending bar hardened
Punching station, flat steel shears, angle steel shears, sectional steel shears, available with notching station starting from HPS 45S
DS series with two working cylinders and two foot pedals for simultaneous use with punching station and sectional steel shears
Stepless adjustment of the stroke
Larger reach for punching station with 620 mm optional, available from HPS 55DS
Heavy and rigid welded construction
Standard with notching knife starting from HPS 45S
With powerful 400 Volt motor
V-notching knife, oversized punching device and larger throat depth for punching station available on request
Two-stage foot pedal for inching operation
Stamps and dies No. 1, No. 2, No. 3, No. 30, No. 45, No. 60 can be used with the standard delivery scope of the machine. Use of punch and die No. 4 and No. 80 optional (except HPS 40S)
Advantages of punching over drilling:
High time savings - cycle times
No chips
No cooling
Note:
All hydraulic sectional shears are delivered with oil
