Lehtmetalli tööpingid

• Foot operated
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp bending bar
• In series with manual adjustment of the bending angle
• Especially low-maintenance
• The workpiece is clamped by a motorized mechanism
• S-models with segmented upper tools
• SH-models with high, segmented casting foot tools

• Other models
• Standard tools hardened
• Hardened sharp bending bar and bending bar
• Segmented tools and hardened bending bar
• Segmented casting foot tools and bending bar hardened

• With foot control
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp-bending rail
• Seriesßig with manual adjustment of the bending angle
• Especially low-maintenance
• Clamping of the workpiece is motor-driven
• SH models with high, segmented cast base tools
• DUO models with continuous sharp-bending rail and high, segmented goat foot tools

• Standard tools hardened
• Sharp bending bar and bending bar hardened
• Segmented tools and bending bar hardened
• Segmented cast foot tools and bending bar hardened

• Foot operated
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp bending bar
• In series with manual adjustment of the bending angle
• Especially low-maintenance
• The workpiece is clamped by a motorized mechanism
• S-models with segmented upper tools
• SH-models with high, segmented casting foot tools

• Other models
• Standard tools hardened
• Hardened sharp bending bar and bending bar
• Segmented tools and hardened bending bar
• Segmented casting foot tools and bending bar hardened

• With foot control
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp-bending rail
• Seriesßig with manual adjustment of the bending angle
• Especially low-maintenance
• Clamping of the workpiece is motor-driven
• SH models with high, segmented cast base tools
• DUO models with continuous sharp-bending rail and high, segmented goat foot tools

• Standard tools hardened
• Sharp bending bar and bending bar hardened
• Segmented tools and bending bar hardened
• Segmented cast foot tools and bending bar hardened

• Stable construction
• For quick rectangular notching of metal sheets
• User-friendly and energy-saving thanks to pneumatic drive
• Solid table with recessed scales and T-slots for precise adjustment of the pivotable stops
• Finger protection cover made of Plexiglas for optimum view of the cutting edge
• Operation via foot pedal

MTBS 1540-40 T NC-juhitav giljotiin pneumaatilise lehetoestuse ja digitaalse tagapiirikuga. Töölaius 1540 mm, lõikevõime kuni 4 mm terasel, esi- ja tagasuunaline väljastus ning 6,8 kW võimsus professionaalseks metallitööks.

Tehnilised andmed:

• Töölaius: 1540 mm
• Maksimaalne lõikevõime terasel (400 N/mm²): 4,0 mm
• Maksimaalne lõikevõime terasel (450 N/mm²): 4,0 mm
• Maksimaalne lõikevõime roostevabal terasel (700 N/mm²): 2,5 mm
• Lõigete arv minutis: 40
• Lõikenurk: 2°
• Tagapiiriku reguleerimisulatus: kuni 750 mm
• Tagapiiriku kiirus: 28 mm/s
• Tagapiiriku mootor: 0,37 kW
• Lõikevahe reguleerimine: 0,05–0,4 mm
• Mootori koguvõimsus: 6,8 kW
• Toitepinge: 400 V / 50 Hz
• Õhukulu tsükli kohta: 12 l
• Töölaua mõõdud (P × S): 1718 × 530 mm
• Mõõtmed (P × L × K): 2320 × 2360 × 1280 mm
• Netokaal: 2240 kg

Komplekti sisu:

• MTBS 1540-40 T giljotiin
• NC-juhitav tagapiirik digitaalse mõõdunäiduga (Maper HT071)
• Pneumaatiline lehetoestus
• Esi- ja tagasuunalise väljastusega materjali suunamissüsteem
• 1000 mm külgpiirik T-soone ja mõõteskaalaga
• Kaks 500 mm lehetoestust T-soontega
• LED-lõikeala valgustus
• Roostevabast terasest töölauakate koos ülekandekuulidega
• Jalapedaaliga mobiilne juhtkonsool koos hädaseiskamisnupuga
• Pidev sõrmekaitsesüsteem
• Kvaliteetsed lõiketerad roostevaba terase lõikamiseks

• Powerful and quiet drive via LENZE gear motors with brake
• Compact, heavy and stress-free welded steel construction
• Sharp bending rail made of tool steel C50 at the clamping cheek
• Continuous, exchangeable bed support made of tool steel C50
• Continuous bending rail made of tool steel C50 at the bending beam
• Automatic pressure regulation of the clamping cheek via motor current pick-up
• Drive of the clamping cheek via generously dimensioned trapezoidal thread spindles
• Bending angle adjustment PT 1 via potentiometer on the machine front (right)
• Manual fine adjustment of bending beam with scale
• Manual crowning via pressure screws in the bending beam
• Foot remote control with emergency stop function
• All moving parts with low-maintenance bearings
• Electrical components from Schneider or Omron
• SH-models with high, segmented goat's foot tools
• Quality Made in Europe
• Available on request: Models in DUO design with continuous sharp bending rail and segmented goad foot tools, standard tools hardened, sharp bending rail and bending bar hardened, segmented tools and bending bar hardened, segmented goad foot tools and bending bar hardened

• Heavy, stable construction
< li>Exact angle adjustment via two handwheels
• punching station with 12 tons of punching pressure on the back

• User-friendly and energy-saving thanks to the hydraulic drive
• Heavy, stable construction
• Solid table with recessed scales and T-slots for precise adjustment of the swiveling stops
• Exact angle adjustment Via two handwheels
• Finger protection cover made of plexiglass for an optimal view of the cutting edge
• Punching station with 12 tons of punching pressure on the back
• Operation via pedal
• Delivered with hydraulic oil

• Foot operated
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp bending bar
• In series with manual adjustment of the bending angle
• Especially low-maintenance
• The workpiece is clamped by a motorized mechanism
• S-models with segmented upper tools
• SH-models with high, segmented casting foot tools

• Other models
• Standard tools hardened
• Hardened sharp bending bar and bending bar
• Segmented tools and hardened bending bar
• Segmented casting foot tools and bending bar hardened

• Powerful and quiet drive via LENZE gear motors with brake
• Compact, heavy and stress-free welded steel construction
• Sharp bending rail made of tool steel C50 at the clamping cheek
• Continuous, exchangeable bed support made of tool steel C50
• Continuous bending rail made of tool steel C50 at the bending beam
• Automatic pressure regulation of the clamping cheek via motor current pick-up
• Drive of the clamping cheek via generously dimensioned trapezoidal thread spindles
• Bending angle adjustment PT 1 via potentiometer on the machine front (right)
• Manual fine adjustment of bending beam with scale
• Manual crowning via pressure screws in the bending beam
• Foot remote control with emergency stop function
• All moving parts with low-maintenance bearings
• Electrical components from Schneider or Omron
• SH-models with high, segmented goat's foot tools
• Quality Made in Europe
• Available on request: Models in DUO design with continuous sharp bending rail and segmented goad foot tools, standard tools hardened, sharp bending rail and bending bar hardened, segmented tools and bending bar hardened, segmented goad foot tools and bending bar hardened

• Very heavy and robust welded construction
• Dynamic drive of the bending beam by means of two frequency-controlled motors with gears
• Over cheek clamping via trapezoidal thread
• High-quality Lenze motors
• Continuous sharp bending rail
• Tools suitable for bending stainless steel
• Bending angle adjustment via touchscreen NC control system
• Sheet thickness adjustment manually at the bending beam
• Manual crowning device of the bending beam
• Operation via double foot pedal with emergency stop function
• Clean motor-driven machine without hydraulics
• SH models with segmented, high goat foot tools
• DUO models with continuous sharp-bending rail and high, segmented goat foot tools

• Heavy cast construction
• hardened bending rolls
• Shafts made of special steel, hardened and ground
• Lateral straightening rollers, infinitely adjustable
• All 3 rollers driven by gear
• Horizontal and vertical working position
• Suitable for very small bending diameters
• Suitable for very small bending diameters due to orbital deliverable lower rollers
• mobile control panel with two digital displays for the feed rollers
• Straightening rolls are suitable for bending angle iron as standard

• Tube bending rolls
• Angle bending rolls
• Special straightening rollers
• Profile bending rolls
• Plastic rollers for soft materials
• Device for twisting rods
• Spiral bending tool

• Foot operated
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp bending bar
• In series with manual adjustment of the bending angle
• Especially low-maintenance
• The workpiece is clamped by a motorized mechanism
• S-models with segmented upper tools
• SH-models with high, segmented casting foot tools

• Other models
• Standard tools hardened
• Hardened sharp bending bar and bending bar
• Segmented tools and hardened bending bar
• Segmented casting foot tools and bending bar hardened

MTBS 1350-30 T puuteekraaniga giljotiin professionaalseks lehtmetalli lõikamiseks. Töölaius 1350 mm, lõikevõime kuni 3 mm terasel, NC-juhitav tagapiirik, LED-lõikejoone valgustus ja võimas 3 kW mootor.

Tehnilised andmed:

• Töölaius: 1350 mm
• Maksimaalne lõikevõime terasel (400 N/mm²): 3,0 mm
• Maksimaalne lõikevõime roostevabal terasel (700 N/mm²): 1,5 mm
• Lõigete arv minutis: kuni 40
• Lõikenurk: 2,2°
• Tagapiiriku reguleerimisulatus: kuni 750 mm
• Tagapiirik: mootoriga, NC-juhitav
• Mootori võimsus: 3 kW
• Toitepinge: 400 V / 50 Hz
• Õhukulu tsükli kohta: 4 l
• Netokaal: ligikaudu 1150 kg
• Juhtimine: puuteekraaniga juhtsüsteem
• Töölaua kate: roostevaba teras

Komplekti sisu:

• MTBS 1350-30 T giljotiin
• Puuteekraaniga juhtsüsteem
• NC-juhitav tagapiirik
• 90° külgpiirik pikkusega 1000 mm
• Kaks lehetoestust T-soontega
• LED-lõikejoone valgustus
• Jalapedaaliga juhtkonsool koos hädaseiskamisnupuga
• Pööratavad lõiketerad roostevaba terase lõikamiseks
• Survetala kummist kaitsesisestega
• Valgusbarjääriga kaitstud tagumine ala

• Very heavy and robust welded construction
• Dynamic drive of the bending beam by means of two frequency-controlled motors with gears
• Over cheek clamping via trapezoidal thread
• High-quality Lenze motors
• Continuous sharp bending rail
• Tools suitable for bending stainless steel
• Bending angle adjustment via touchscreen NC control system
• Sheet thickness adjustment manually at the bending beam
• Manual crowning device of the bending beam
• Operation via double foot pedal with emergency stop function
• Clean motor-driven machine without hydraulics
• SH models with segmented, high goat foot tools
• DUO models with continuous sharp-bending rail and high, segmented goat foot tools

• Heavy steel welded construction
• Upper and pinch roller driven
• Motorized delivery of the side roller
• Swing-out top roller
• Roller drive via powerful electric motor and gearbox
• Safety device Emergency line
• Mobile control panel

• Swiveling top roller

• Please specify when ordering material to be processed!
• Other models on request

• With foot control
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp-bending rail
• Seriesßig with manual adjustment of the bending angle
• Especially low-maintenance
• Clamping of the workpiece is motor-driven
• SH models with high, segmented cast base tools
• DUO models with continuous sharp-bending rail and high, segmented goat foot tools

• Standard tools hardened
• Sharp bending bar and bending bar hardened
• Segmented tools and bending bar hardened
• Segmented cast foot tools and bending bar hardened

• With foot control
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp-bending rail
• Seriesßig with manual adjustment of the bending angle
• Especially low-maintenance
• Clamping of the workpiece is motor-driven
• SH models with high, segmented cast base tools
• DUO models with continuous sharp-bending rail and high, segmented goat foot tools

• Standard tools hardened
• Sharp bending bar and bending bar hardened
• Segmented tools and bending bar hardened
• Segmented cast foot tools and bending bar hardened

• Heavy welded steel construction
• top and clamping roller driven
• Swing-out top roller
• Manual adjustment of the clamping and side roller
• Roller drive via powerful electric motor and gearbox
• Wire grooves on the clamping roller
• Safety device emergency stop line
• With mobile control panel and foot pedal
• Note: Please specify the type of material to be processed when ordering!
• Note: Other models on request

• Swing-out top roller
• Control panel with digital display and manual operation (optional)
• RBM 2050-30 E PRO with optional motorized infeed of the side roller and digital display for side roller

• With foot control
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp-bending rail
• Seriesßig with manual adjustment of the bending angle
• Especially low-maintenance
• Clamping of the workpiece is motor-driven
• SH models with high, segmented cast base tools
• DUO models with continuous sharp-bending rail and high, segmented goat foot tools

• Standard tools hardened
• Sharp bending bar and bending bar hardened
• Segmented tools and bending bar hardened
• Segmented cast foot tools and bending bar hardened