Lehtmetalli tööpingid

• Foot operated
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp bending bar
• In series with manual adjustment of the bending angle
• Especially low-maintenance
• The workpiece is clamped by a motorized mechanism
• S-models with segmented upper tools
• SH-models with high, segmented casting foot tools

• Other models
• Standard tools hardened
• Hardened sharp bending bar and bending bar
• Segmented tools and hardened bending bar
• Segmented casting foot tools and bending bar hardened

• Heavy welded steel construction
• top and clamping roller driven
• Swing-out top roller
• Manual adjustment of the clamping and side roller
• Roller drive via powerful electric motor and gearbox
• Wire grooves on the clamping roller
• Safety device emergency stop line
• With mobile control panel and foot pedal
• Note: Please specify the type of material to be processed when ordering!
• Note: Other models on request

• Swing-out top roller
• Control panel with digital display and manual operation (optional)
• RBM 2050-30 E PRO with optional motorized infeed of the side roller and digital display for side roller

• Heavy and stable steel construction
• self-braking engine
• Fußpedalbedienung
• adjustable lower shaft
• adjustable stop plate
• Steel shafts mounted with bronze bushes
• 4 set of standard rolls
• with underframe
• powerful 400 volt engine

Please specify when ordering material to be edited!

• Punching station, flat steel shears, angle steel shears, sectional steel shears, available with notching station starting from HPS 45S
• DS series with two working cylinders and two foot pedals for simultaneous use with punching station and sectional steel shears
• Stepless adjustment of the stroke
• Larger reach for punching station with 620 mm optional, available from HPS 55DS
• Heavy and rigid welded construction
• Standard with notching knife starting from HPS 45S
• With powerful 400 Volt motor
• V-notching knife, oversized punching device and larger throat depth for punching station available on request
• Two-stage foot pedal for inching operation
• Stamps and dies No. 1, No. 2, No. 3, No. 30, No. 45, No. 60 can be used with the standard delivery scope of the machine. Use of punch and die No. 4 and No. 80 optional (except HPS 40S)

Advantages of punching over drilling:

• High time savings - cycle times
• No chips
• No cooling

Note:

• All hydraulic sectional shears are delivered with oil

• With foot control
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp-bending rail
• Seriesßig with manual adjustment of the bending angle
• Especially low-maintenance
• Clamping of the workpiece is motor-driven
• SH models with high, segmented cast base tools
• DUO models with continuous sharp-bending rail and high, segmented goat foot tools

• Standard tools hardened
• Sharp bending bar and bending bar hardened
• Segmented tools and bending bar hardened
• Segmented cast foot tools and bending bar hardened

SBM 250-25 E mootorajamiga sikemasin professionaalseks lehtmetalli töötlemiseks. Töölaius 250 mm, töövõime kuni 2,5 mm terasel, 1,5 kW mootor ja jalapedaaljuhtimine täpseks ning efektiivseks tööks.

Tehnilised andmed:

• Rullikute pikkus: 250 mm
• Rullikute läbimõõt: 96 mm
• Maksimaalne töövõime terasel (400 N/mm²): 2,5 mm
• Rullikute kiirus: 5 m/min
• Mootori võimsus: 1,5 kW
• Toitepinge: 400 V / 50 Hz
• Mõõtmed (P × L × K): 1400 × 550 × 1120 mm
• Kaal: 350 kg
• Võlli laagrid: pronkspuksidega
• Juhtimine: jalapedaaliga

Komplekti sisu:

• SBM 250-25 E sikemasin
• 4 standardset rullikukomplekti (S1–S4)
• Erivõti rullikute paigaldamiseks ja eemaldamiseks
• Jalapedaal
• Alusraam

• Punching station, flat steel shears, angle steel shears, sectional steel shears, available with notching station starting from HPS 45S
• DS series with two working cylinders and two foot pedals for simultaneous use with punching station and sectional steel shears
• Stepless adjustment of the stroke
• Larger reach for punching station with 620 mm optional, available from HPS 55DS
• Heavy and rigid welded construction
• Standard with notching knife starting from HPS 45S
• With powerful 400 Volt motor
• V-notching knife, oversized punching device and larger throat depth for punching station available on request
• Two-stage foot pedal for inching operation
• Stamps and dies No. 1, No. 2, No. 3, No. 30, No. 45, No. 60 can be used with the standard delivery scope of the machine. Use of punch and die No. 4 and No. 80 optional (except HPS 40S)

Advantages of punching over drilling:

• High time savings - cycle times
• No chips
• No cooling

Note:

• All hydraulic sectional shears are delivered with oil

MTBS 3130-30 B NC-juhitav giljotiin professionaalseks lehtmetalli lõikamiseks. Töölaius 3050 mm, lõikevõime kuni 3 mm terasel, 750 mm NC-tagapiirik, LED-lõikejoone valgustus ja võimas 7,5 kW mootor.

Tehnilised andmed:

• Töölaius: 3050 mm
• Maksimaalne lõikevõime terasel (400 N/mm²): 3,0 mm
• Maksimaalne lõikevõime roostevabal terasel (700 N/mm²): 1,5 mm
• Lõigete arv minutis: 38
• Lõikenurk: 1,5°
• Tagapiiriku reguleerimisulatus: kuni 750 mm
• Tagapiirik: mootoriga, NC-juhitav
• Tagapiiriku ajam: sagedusmuundur, pidurmootor ja kuulkruvid
• Mootori võimsus: 7,5 kW
• Toitepinge: 400 V / 50 Hz
• Õhukulu tsükli kohta: 4 l
• Mõõtmed (P × L × K): 3760 × 2160 × 1280 mm
• Netokaal: 3600 kg
• Täht-kolmnurk käivitus: jah
• Roostevabast terasest töölaua kate: jah

Komplekti sisu:

• MTBS 3130-30 B NC-juhitav giljotiin
• NC-juhitav tagapiirik (750 mm käik)
• 90° külgpiirik pikkusega 1000 mm
• Kaks tugevat lehetoestust T-soonte ja kallutuskambritega
• LED-lõikejoone valgustus
• Manuaalne lõikevahe reguleerimine
• Mobiilne juhtkonsool jalapedaali ja hädaseiskamisnupuga
• Pööratavad lõiketerad roostevaba terase lõikamiseks
• Survetala kummist kaitsesisestega
• Valgusbarjääriga kaitstud tagumine ala

• heavy and stable cast iron construction
• asymmetric 3-roller system for easy pre-bending
• swing-out top roller
• Roller drive via hand crank
• suitable for bending wires with the diameters 3, 5 and 8 mm
• quick clamping of the sheet metal by means of a lever

• Note: Please specify when ordering material to be processed!

• Foot operated
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp bending bar
• In series with manual adjustment of the bending angle
• Especially low-maintenance
• The workpiece is clamped by a motorized mechanism
• S-models with segmented upper tools
• SH-models with high, segmented casting foot tools

• Other models
• Standard tools hardened
• Hardened sharp bending bar and bending bar
• Segmented tools and hardened bending bar
• Segmented casting foot tools and bending bar hardened

MTBS 2100-40 T NC-juhitav giljotiin professionaalseks lehtmetalli lõikamiseks. Töölaius 2100 mm, lõikevõime kuni 4 mm terasel, pneumaatiline lehetoestus, digitaalne tagapiirik ja 7,5 kW mootor suure tootlikkuse tagamiseks.

Tehnilised andmed:

• Töölaius: 2100 mm
• Maksimaalne lõikevõime terasel (400 N/mm²): 4,0 mm
• Maksimaalne lõikevõime terasel (450 N/mm²): 4,0 mm
• Maksimaalne lõikevõime roostevabal terasel (700 N/mm²): 2,5 mm
• Lõigete arv minutis: 38
• Lõikenurk: 1,8°
• Tagapiiriku reguleerimisulatus: kuni 750 mm
• Tagapiiriku kiirus: 28 mm/s
• Tagapiiriku mootor: 0,37 kW
• Lõikevahe reguleerimine: 0,05–0,4 mm
• Mootori võimsus: 7,5 kW
• Koguvõimsus: 9 kW
• Toitepinge: 400 V / 50 Hz
• Õhukulu tsükli kohta: 13 l
• Töölaua mõõdud: 2278 × 530 mm
• Mõõtmed (P × L × K): 2880 × 2360 × 1280 mm
• Netokaal: 2650 kg
• Täht-kolmnurk käivitus: jah

Komplekti sisu:

• MTBS 2100-40 T giljotiin
• NC-juhitav tagapiirik Maper HT071 digitaalnäiduga
• Pneumaatiline lehetoestus
• Esi- ja tagasuunaline materjali väljastussüsteem
• 1000 mm külgpiirik mõõteskaala ja T-soonega
• Kolm lehetoestust T-soontega
• Roostevabast terasest töölauakate koos ülekandekuulidega
• LED-lõikeala valgustus
• Lõikevahe täppisreguleerimine
• Mobiilne jalapedaal koos hädaseiskamisnupuga
• Pidev sõrmekaitsesüsteem
• Roostevaba terase lõikamiseks sobivad kvaliteetsed lõiketerad

AKM 131-3 P on pneumaatiline väljalõikepink, mis on mõeldud lehtmetalli kiireks ja täpseks 90° nurga all väljalõikamiseks.

Vastupidav konstruktsioon ning pneumaatiline ajam tagavad mugava, energiasäästliku ja tõhusa töö ka nõudlikes töökeskkondades. Tööpind on varustatud süvistatud mõõteskaalade ja T-soontega, mis võimaldavad pööratavaid piirikuid täpselt seadistada. Läbipaistev pleksiklaasist sõrmekaitse tagab hea ülevaate lõikeservast ning suurendab tööohutust. Masinat juhitakse mugavalt jalglüliti abil.

Tehnilised andmed:

• Töörežiim: pneumaatiline
•  Töörõhk: 8 bar
•  Lõikeala pikkus: 130 mm
•  Lõikeala laius: 130 mm
•  Lõikenurk: 90°
•  Lõikevõime (materjali tõmbetugevus 400 N/mm²): 3 mm
•  Lõikevõime (materjali tõmbetugevus 600 N/mm²): 1,5 mm
•  Märkus: roostevaba terase lõikamine (600 N/mm²) nõuab valikulist terakomplekti
•  Töölaua pikkus: 600 mm
•  Töölaua laius: 460 mm
•  Töölaua kõrgus: 950 mm
•  Masina pikkus: 730 mm
•  Masina laius/sügavus: 600 mm
•  Masina kõrgus: 1260 mm
•  Netokaal: 188 kg
•  Brutokaal: 198 kg

Komplekti sisu:

• Pneumaatiline väljalõikepink AKM 131-3 P
• Jalglüliti
• Pleksiklaasist sõrmekaitse
• Reguleeritavate piirikutega töölaud
• Kasutusjuhend

• With foot control
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp-bending rail
• Seriesßig with manual adjustment of the bending angle
• Especially low-maintenance
• Clamping of the workpiece is motor-driven
• SH models with high, segmented cast base tools
• DUO models with continuous sharp-bending rail and high, segmented goat foot tools

• Standard tools hardened
• Sharp bending bar and bending bar hardened
• Segmented tools and bending bar hardened
• Segmented cast foot tools and bending bar hardened

• heavy and stable cast iron construction
• asymmetric 3-roller system for easy pre-bending
• swing-out top roller
• Roller drive via hand crank
• suitable for bending wires with the diameters 3, 5 and 8 mm
• quick clamping of the sheet metal by means of a lever

• Note: Please specify when ordering material to be processed!

• Variable forward and backward movement limitation
• Use of different tools possible
• Simple attachment of tools and devices to the work table üvia M12 bores and T-slots
• Interchangeable tables allow the machining of workpieces of different sizes
• Pressure adjustment via hydraulic valve

• Variable forward and return travel limitation by adjustable inductive limit switches
• Use of a wide variety of tools possible due to the variable forward and return travel limitation
• Simple attachment of tools and devices to the work table via M12 holes and T-slots
• Interchangeable tables make it possiblemade it possible to machine workpieces of different sizes
• actuation of the lifting cylinder via foot switch
• pressure adjustment via hydraulic valve
• Recess in the worktable for cutting waste
• Storage possibility for punching and cutting tools in the substructure
• Die holder not included in scope of delivery

BSS 1020 E käsigiljotiin täpseks lehtmetalli lõikamiseks. Töölaius 1050 mm, lõikevõime kuni 1,5 mm, tugev malmkonstruktsioon, reguleeritav külgpiirik ja suur töölaud professionaalseks kasutamiseks.

Tehnilised andmed:

• Maksimaalne lõikelaius: 1050 mm
• Maksimaalne lehtmetalli paksus (400 N/mm²): 1,5 mm
• Külgpiiriku reguleerimisulatus: 0–550 mm
• Töölaua mõõtmed: 600 × 1280 mm
• Mõõtmed (P × L × K): 2000 × 850 × 1500 mm
• Netokaal: 435 kg
• Konstruktsioon: raske malmkonstruktsioon
• Juhtimine: käsitsi

Komplekti sisu:

• BSS 1020 E Käsigiljotiin
• Standardne survetala
• Eemaldatav nurgapiirik töölaul
• Käsivändaga reguleeritav külgpiirik
• Integreeritud töölaud malmpinnaga

• Powerful and quiet drive via LENZE gear motors with brake
• Compact, heavy and stress-free welded steel construction
• Sharp bending rail made of tool steel C50 at the clamping cheek
• Continuous, exchangeable bed support made of tool steel C50
• Continuous bending rail made of tool steel C50 at the bending beam
• Automatic pressure regulation of the clamping cheek via motor current pick-up
• Drive of the clamping cheek via generously dimensioned trapezoidal thread spindles
• Bending angle adjustment PT 1 via potentiometer on the machine front (right)
• Manual fine adjustment of bending beam with scale
• Manual crowning via pressure screws in the bending beam
• Foot remote control with emergency stop function
• All moving parts with low-maintenance bearings
• Electrical components from Schneider or Omron
• SH-models with high, segmented goat's foot tools
• Quality Made in Europe
• Available on request: Models in DUO design with continuous sharp bending rail and segmented goad foot tools, standard tools hardened, sharp bending rail and bending bar hardened, segmented tools and bending bar hardened, segmented goad foot tools and bending bar hardened

• Foot operated
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp bending bar
• In series with manual adjustment of the bending angle
• Especially low-maintenance
• The workpiece is clamped by a motorized mechanism
• S-models with segmented upper tools
• SH-models with high, segmented casting foot tools

• Other models
• Standard tools hardened
• Hardened sharp bending bar and bending bar
• Segmented tools and hardened bending bar
• Segmented casting foot tools and bending bar hardened

• Powerful and quiet drive via LENZE gear motors with brake
• Compact, heavy and stress-free welded steel construction
• Sharp bending rail made of tool steel C50 at the clamping cheek
• Continuous, exchangeable bed support made of tool steel C50
• Continuous bending rail made of tool steel C50 at the bending beam
• Automatic pressure regulation of the clamping cheek via motor current pick-up
• Drive of the clamping cheek via generously dimensioned trapezoidal thread spindles
• Bending angle adjustment PT 1 via potentiometer on the machine front (right)
• Manual fine adjustment of bending beam with scale
• Manual crowning via pressure screws in the bending beam
• Foot remote control with emergency stop function
• All moving parts with low-maintenance bearings
• Electrical components from Schneider or Omron
• SH-models with high, segmented goat's foot tools
• Quality Made in Europe
• Available on request: Models in DUO design with continuous sharp bending rail and segmented goad foot tools, standard tools hardened, sharp bending rail and bending bar hardened, segmented tools and bending bar hardened, segmented goad foot tools and bending bar hardened

• Foot operated
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp bending bar
• In series with manual adjustment of the bending angle
• Especially low-maintenance
• The workpiece is clamped by a motorized mechanism
• S-models with segmented upper tools
• SH-models with high, segmented casting foot tools

• Other models
• Standard tools hardened
• Hardened sharp bending bar and bending bar
• Segmented tools and hardened bending bar
• Segmented casting foot tools and bending bar hardened