Metallitööpingid

• Material roller conveyor with stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel (optionally also available with plastic rollers)
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 450 mm
• Length measuring device with handwheel adjustment
• Roller and measuring track with digital LED dimension display in mm, electrical connection 230 V, 50 Hz with power supply unit
• Measuring stop adjustable by handwheel from the workplace, with pneumatic brake for measuring fixation
• Sturdy material stop trolley, 12 ball bearings, movable on large dimensioned guide profile. The stop arm is adjustable and hinged.
• For roller conveyors with a length of more than 5 m, a cable drag chain is used
• Mounting side as desired right or left

Equipment details

position indicator

• 5-digit LED measurement display for constant, millimeter-accurate control of the current position of the stop car
• Position indicator with hollow shaft encoder mounted directly on the drive shaft
• Measuring accuracy / m: ± 0.5 mm

stop arm

• 900 mm long stop arm
• Stop plate adjustable to zero point and manually hinged backwards
• Multiple ball bearings, thus free of play
• Quality Made in Germany

Tehnilised andmed:

• Puurimisvõimsus terases (S235JR): 32 mm.
• Pidev puurimisvõimsus terases (S235JR): 28 mm.
• Maksimaalne freespea läbimõõt: 63 mm.
• Maksimaalne otsfreesi läbimõõt: 28 mm.
• Mootori võimsus: 1,1 / 1,5 kW.
• Toitepinge: 400 V / 50 Hz.
• Pöörlemiskiirus: 95-3200 p/min.
• Kiiruste arv: 12 (2 × 6 astet).
• Spindli koonus: MK4.
• Spindli käik: 120 mm.
• Spindli väljaulatus: 258 mm.
• Laua mõõtmed: 800 × 240 mm.
• T-soonte mõõt: 14 mm.
• T-soonte arv: 3.
• X-telje käsitsikäik: 560 mm.
• X-telje automaatkäik: 480 mm.
• Y-telje käik: 195 mm.
• Z-telje käik: 350 mm.
• Maksimaalne kaugus spindlist töölauani: 420 mm.
• Freesipea kallutus: ±45°.
• Jahutuspumba võimsus: 100 W.
• Mõõtmed (P × L × K): 1600 × 930 × 2110 mm.
• Kaal: 495 kg.

Komplekti kuulub:

• Alusraam.
• MK3 koonus.
• MK3-MK4 adapter.
• Tõmbevarras M16.
• Kasutustööriistad.

• Simple operation
• Heavy, compact welded construction
• Particularly low maintenance
• For easy bending with precise adjustment of the bending angle using a stop with scale
• Sheet thickness adjustable via bending beam
• Tools for VA on request: sharp bending rail and bending bar made of Toolox 33, segmented tools and bending bar made of Toolox 33 and segmented goat foot tools made of Toolox 33
• Quality Made in Europe

• Simple operation
• Heavy, compact welded construction
• Particularly low maintenance
• For easy bending with precise adjustment of the bending angle using a stop with scale
• Sheet thickness adjustable via bending beam
• Tools for VA on request: Sharp bending rail and bending bar made of Toolox 33, segmented tools and bending bar made of Toolox 33 and segmented goat foot tools made of Toolox 33
• Quality Made in Europe

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 400 mm
• Precision flat steel guide attached to the back of the roller conveyor
• Sturdy, 6-way ball-bearing material stop trolley, easy-moving, manually movable and lockable
• Robust stop arm attached to the stop truck, adjustable to the tool (0 point)
• With length measuring device and digital dimensioning system
• Roller and measuring track with battery-operated LCD display and magnetic tape measuring system
• Quality Made in Germany

Please specify when ordering mounting side and height!

Working height up to 1020 mm possible with optional foot plates.

By request:

• Working height from 1020 mm can be extended from the factory
• Also with 500 mm web width

• Industrial motor
• Quiet running spindle thanks to new spindle design
• Machine operation with safety electrics in 24 V DC voltage
• Guaranteed concentricity ≤ 0.02 mm measured in the drilling spindle
• Right/left rotation
• Precision spindle bore
• Control panel with user-friendly, dirt and water resistant membrane keypad
• Speed display
• Separate emergency stop impact switch
• Thread cutting function
• Precisely machined, stable drilling table with diagonally running T-slots with circumferential cooling water channel, laterally tiltable by ±45° and 360° rotatable
• Digital depth gauge
• LED machine light integrated in drill head
• V-belt cover with safety switch
• Thick-walled steel column for high force absorption and stability
• Solid, large-dimensioned base plate with T-slots
• Heavy-duty design of the entire machine

Tehnilised andmed:

• Maksimaalne lõikekõrgus: 330 mm.
• Lõikeulatus (throat): 508 mm.
• Saelindi kiirus: 15–120 m/min ja 190–1500 m/min.
• Saelindi pikkus: 4035 mm.
• Saelindi laius: 13–27 mm.
• Saelindi paksus: 0,65–0,9 mm.
• Töölaua mõõtmed: 600 × 700 mm.
• Töölaua kandevõime: 350 kg.
• Töökõrgus: 990 mm.
• Töölaua kallutusnurk: 12° / 12°.
• Saelindi keevitusseadme võimekus: kuni 19 mm.
• Veoratta läbimõõt: 515 mm.
• Mootori võimsus: 2,2 kW.
• Toitepinge: 400 V / 50 Hz.
• Mõõtmed (P × L × K): 1090 × 780 × 2030 mm.
• Kaal: 570 kg.

Komplekti kuulub:

• Ringlõikeseade.
• Nurgapiirik kaldlõigete tegemiseks.
• Paralleeljuhik.
• Suurendusklaas.

• Punching station, flat steel shears, angle steel shears, sectional steel shears, available with notching station starting from HPS 45S
• DS series with two working cylinders and two foot pedals for simultaneous use with punching station and sectional steel shears
• Stepless adjustment of the stroke
• Larger reach for punching station with 620 mm optional, available from HPS 55DS
• Heavy and rigid welded construction
• Standard with notching knife starting from HPS 45S
• With powerful 400 Volt motor
• V-notching knife, oversized punching device and larger throat depth for punching station available on request
• Two-stage foot pedal for inching operation
• Stamps and dies No. 1, No. 2, No. 3, No. 30, No. 45, No. 60 can be used with the standard delivery scope of the machine. Use of punch and die No. 4 and No. 80 optional (except HPS 40S)

Advantages of punching over drilling:

• High time savings - cycle times
• No chips
• No cooling

Note:

• All hydraulic sectional shears are delivered with oil

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 400 mm
• Precision flat steel guide attached to the rear of the roller conveyor
• Sturdy, 6-way ball-bearing material stop trolley, easy-moving, manually movable and lockable
• Stopper with reading magnifying glass facilitates reading on the mm scale
• Robust stop arm attached to the stop truck, adjustable to the tool (0 point)
• Quality Made in Germany

Working height up to 1020 mm possible with optional foot plates.

By request:

• Working height from 1020 mm can be extended from the factory
• Also with 500 mm web width

• heavy welded steel construction
• Horizontal and vertical work possibility
• Hydraulic adjustment of the upper roller
• all 3 rollers driven
• Rolls are hardened
• lateral straightening rollers, infinitely adjustable
• separate control panel with foot control
• powerful 400 volt engine

• Tube bending rolls
• Angle bending rolls
• Special straightening rollers
• Profile bending rolls
• Plastic rollers for soft materials

• Powerful motors with vibration-free running to achieve the best sanding results
• Working height can be adjusted thanks to the infinitely variable inclination of the sanding unit
• Continuous flat sanding surface enables sanding of even long workpieces
• Suction nozzle on the rear belt roller
• Sanding belt can be changed in seconds thanks to quick-release system

• Powerful motors with vibration-free running to achieve the best sanding results
• Working height can be adjusted by infinitely variable inclination of the sanding unit
• Angle-adjustable workpiece support
• Continuous flat sanding surface enables sanding even of long workpieces
• One extraction nozzle on the spark box and one on the rear belt roller
• Protective screen can be folded away
• Sanding belt can be changed in seconds thanks to quick-release system
• Easy adjustment of the belt run via adjusting screw on the front contact roller
• Motor with brake and circuit breaker

• Feed roller conveyor without length stop and without measuring system
• Roller and guideway system on which lighter wood, metal or plastic profiles can be precisely sawed, drilled or milled
• Substructure made of solid 3 mm steel profiles, painted and with adjustable feet
• Support rollers made of galvanized steel (optionally also available with plastic rollers)
• standard design
• Quality Made in Germany

Tehnilised andmed:

• Mootori võimsus: 1,5 kW
• Toitepinge: 400 V
• Poleerketta läbimõõt: 250 mm
• Poleerketta laius: 25 mm
• Ava läbimõõt: 20 mm
• Pöörlemiskiirus: 2850 p/min
• Mõõdud (P × L × K): 555 × 250 × 296 mm
• Kaal: 17,4 kg

Komplekti kuulub:

• 2 laia poleerimisketast

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 400 mm
• Precision flat steel guide attached to the rear of the roller conveyor
• Sturdy, 6-way ball-bearing material stop trolley, easy-moving, manually movable and lockable
• Stopper with reading magnifying glass facilitates reading on the mm scale
• Robust stop arm attached to the stop truck, adjustable to the tool (0 point)
• Quality Made in Germany

Working height up to 1020 mm possible with optional foot plates.

By request:

• Working height from 1020 mm can be extended from the factory
• Also with 500 mm web width

Tehnilised andmed:

• Mootori võimsus: 0,75 kW
• Toitepinge: 400 V
• Võrgusagedus: 50 Hz
• Puurimisvõimsus terases (S235JR): 25 mm
• Pidev puurimisvõimsus terases (S235JR): 20 mm
• Pöörete vahemik: 200–2440 p/min
• Käikude arv: 12
• Spindli koonus: MK3 (MT3)
• Kiirpingutatav puurpadrun: 1–16 mm
• Spindli käik: 80 mm
• Ulatus (spindli teljest sambani): 181 mm
• Spindli viskumistäpsus: ≤ 0,03 mm
• Töölaua mõõtmed: 280 × 280 mm
• T-soonte mõõt: 14 mm
• Puurpea pöördenurk: 360°
• Puurpea kallutus: ±45°
• Mõõdud (P × L × K): 700 × 350 × 1012 mm
• Netokaal: 67 kg
• Brutokaal: 84,6 kg
• Parem- ja vasakkäik

Komplekti kuulub kiirpingutatav puurpadrun, koonusadapter, T-mutrid ja masinakruustang BME 150

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 260 mm
• With length measuring device
• Roller and measuring track with mm-scale, manual measuring system with C-guide profile and sliding flap stop
• Quality Made in Germany

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 400 mm
• Precision flat steel guide attached to the back of the roller conveyor
• Sturdy, 6-way ball-bearing material stop trolley, easy-moving, manually movable and lockable
• Robust stop arm attached to the stop truck, adjustable to the tool (0 point)
• With length measuring device and digital dimensioning system
• Roller and measuring track with battery-operated LCD display and magnetic tape measuring system
• Quality Made in Germany

Please specify when ordering mounting side and height!

Working height up to 1020 mm possible with optional foot plates.

By request:

• Working height from 1020 mm can be extended from the factory
• Also with 500 mm web width

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• Feed / discharge roller conveyor
• Roller conveyor without scale and stop with side guide
• Quality Made in Germany

• Simple operation
• Heavy, compact welded construction
• Particularly low maintenance
• For easy bending with precise adjustment of the bending angle using a stop with scale
• Sheet thickness adjustable via bending beam
• Tools for VA on request: sharp bending rail and bending bar made of Toolox 33, segmented tools and bending bar made of Toolox 33 and segmented goat foot tools made of Toolox 33
• Quality Made in Europe

• Grinding belt change in seconds due to the quick-tensioning system
• Easy adjustment of the belt run
• Automatic re-tensioning of the sanding belt by spring-supported belt tensioning system
• Infinitely tiltable sanding unit
• One belt speed each for grinding steel and stainless steel

• Powerful motors and vibration-free operation for the best sanding results
• Quick sanding belt change in seconds thanks to quick-release system
• Large surface sanding area thanks to fold-away upper sanding belt cover
• Continuous sanding surface after removal of attachments enables sanding of long workpieces too
• Can be used with and without extraction
• One extraction nozzle on the spark box and one on the rear belt roller
• Easy adjustment of the belt run via adjusting screw on the front contact roller
• Automatic retensioning of the sanding belt thanks to spring-loaded belt tensioning system
• Infinitely tiltable sanding unit
• Fold-away protective disk
• MBSM 75-240-2 and 150-240-2 models with two belt speeds for sanding steel and stainless steel