Metallitööpingid

• Heavy steel welded construction
• Upper and pinch roller driven
• Motorized delivery of the side roller
• Swing-out top roller
• Roller drive via powerful electric motor and gearbox
• Safety device Emergency line
• Mobile control panel

• Swiveling top roller

• Please specify when ordering material to be processed!
• Other models on request

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• Feed / discharge roller conveyor
• Roller conveyor without scale and stop with side guide
• Quality Made in Germany

• Excellent for producing clean visible edges and weld preparation
• For machining steel and aluminum
• Due to adjustable guide rollers on the support table also suitable for deburring of tubes with Ø 150 - 350 mm (optional 300 - 600 mm)
• Setting the chamfer height without tools
• Stepless angle adjustment from 0 - 60 °
• Handy and powerful device
• With two 6-way insert holders
• Feed is done manually
• Included carbide indexable inserts are also suitable for machining stainless steel at reduced speeds - tool life depends on specific operating conditions

OPTIdrill DH 24FT on professionaalne ja vastupidav lauapuurpink automaatse pinoolietteandega, mis sobib metallitöökodadesse, hooldusosakondadesse ja tootmisettevõtetesse. Tugev malmkonstruktsioon, täpne spindel ning parem- ja vasakkäik tagavad täpsed töötlustulemused ja pika kasutusea. Komplekti kuulub masinakruustang BMP 100.

Tehnilised andmed:

• Maks. puurimisvõime terases  24 mm
• Pidev puurimisvõime terases  20 mm
• Mootori võimsus 0,85 kW
• Toitepinge  400 V / 50 Hz
• Kiirusvahemik  350-3000 p/min
• Kiirusastmeid  6
• Pinooli käik  85 mm
• Spindlikoonus  MK2
• Ulatus  164 mm
• Kaal   92 kg

Komplekti kuulub:

• Kiirkinnituspuurpadrun 1-16 mm
• Morse koonus
• T-soonemutrid
• Masinakruustang BMP 100

• Material roller conveyor with stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel (optionally also available with plastic rollers)
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 450 mm
• Length measuring device with handwheel adjustment
• Roller and measuring track with digital LED dimension display in mm, electrical connection 230 V, 50 Hz with power supply unit
• Measuring stop adjustable by handwheel from the workplace, with pneumatic brake for measuring fixation
• Sturdy material stop trolley, 12 ball bearings, movable on large dimensioned guide profile. The stop arm is adjustable and hinged.
• For roller conveyors with a length of more than 5 m, a cable drag chain is used
• Mounting side as desired right or left

Equipment details

position indicator

• 5-digit LED measurement display for constant, millimeter-accurate control of the current position of the stop car
• Position indicator with hollow shaft encoder mounted directly on the drive shaft
• Measuring accuracy / m: ± 0.5 mm

stop arm

• 900 mm long stop arm
• Stop plate adjustable to zero point and manually hinged backwards
• Multiple ball bearings, thus free of play
• Quality Made in Germany

• Robust machine design
• Manual and automatic mode selectable
• Easy tool change through quick change adapter

• Durable construction of tools and tool guides made of high-quality, hardened steel
• Manual operation via two foot pedals for flow and return
• Automatic mode by programming the front and rear travel end points
• Easy to change the die by quick change recording
• Foot pedal with digital display and emergency stop switch

Hydraulic oil not included

• Powerful and quiet drive via LENZE gear motors with brake
• Compact, heavy and stress-free welded steel construction
• Sharp bending rail made of tool steel C50 at the clamping cheek
• Continuous, exchangeable bed support made of tool steel C50
• Continuous bending rail made of tool steel C50 at the bending beam
• Automatic pressure regulation of the clamping cheek via motor current pick-up
• Drive of the clamping cheek via generously dimensioned trapezoidal thread spindles
• Bending angle adjustment PT 1 via potentiometer on the machine front (right)
• Manual fine adjustment of bending beam with scale
• Manual crowning via pressure screws in the bending beam
• Foot remote control with emergency stop function
• All moving parts with low-maintenance bearings
• Electrical components from Schneider or Omron
• SH-models with high, segmented goat's foot tools
• Quality Made in Europe
• Available on request: Models in DUO design with continuous sharp bending rail and segmented goad foot tools, standard tools hardened, sharp bending rail and bending bar hardened, segmented tools and bending bar hardened, segmented goad foot tools and bending bar hardened

• Feed and sanding belt speed infinitely adjustable
• Even deburring, cleaning or polishing of pipes
• Two oppositely running sanding belts on a rotating head, the rotation of the workpiece is eliminated
• Feed unit with rubber rollers ensures safe transport of the workpiece
• Profile is simply tensioned by handwheel in feed unit
• Connecting piece for suction
• Easy sanding belt change
• Foot pedal for controlling the rotary head

• Standard with corrugated round brush (250 x 40 x 24 mm with wire Ø 0.5 mm) for steel processing
• with adjustable prism workpiece support
• large screen to protect against
• Sparks and flying chips
• S version with suction unit with separate motor and filter bag

• Suitable for wet grinding machines
• Filter area visible through transparent plastic windows

• Suitable for wet grinding machines
• Filter area visible through transparent plastic windows

• For deburring flat components e.g. after laser cutting or punching
• Large working width with up to 1350 mm
• Conveyor table with profile conveyor belt for optimum hold during processing

• For deburring flat components e.g. after laser cutting or punching
• Large working width with up to 1350 mm
• Conveyor table with profile foconveyor belt for optimum hold during processing
• NC control with 8" touch screen

• For producing all round shaped parts such as pipes, cylinders, etc.
• Roller drive via hand crank or motorized on E models
• Heavy and stable cast iron construction
• Asymmetric 3-roll system for easy pre-bending
• The upper roller is adjustable, thus easy removal of the finished workpiece
• Swiveling top roller
• Easily adjustable upper and lower roller
• Possibility of conical bending
• With safety devices
• Standard wire insert groove on bottom and back roller
• The foot control leaves both hands free for the material supply

DS 300 professionaalne kahepoolne käiakpink metalli töötlemiseks ja tööriistade teritamiseks. Tugev konstruktsioon, stabiilne töö ning täpsed lihvimistulemused töökodadele ja tootmisettevõtetele.

Komplekti sisu:

• Käiakpink DS 300
• 2 lihvketast
• Reguleeritavad töötoed
• Silma- ja sädemekaitsed
• Kasutusjuhend

Tehnilised andmed:

• Maksimaalne töölaius: 2000 mm
• Maksimaalne painutusvõime terasel (400 N/mm²): 1,0 mm
• Mõõdud (P × L × K): 2500 × 660 × 1000 mm
• Netokaal: 244 kg
• Brutokaal: 309 kg
• Kerge konstruktsiooniga mobiilne painutuspink alusraamil
• Sobib katuseplekkseppadele ja plekitööde paigaldajatele neeluplekkide, korstnakatete ja muude profiildetailide valmistamiseks
• Varustatud transpordirataste ja seisupiduriga
• Lihtne ja jäik konstruktsioon tagab täpse töö
• Materjalisõbralik ja ohutu töörežiim
• Detaili kindel kinnitamine hoova abil
• Painutamine toimub kaarhoova abil

• NC control for setting the bending angle and the correction
• counter for high repeatability
• Mobile control panel with controls and pedals
• Fast tool change

• Powerful motor with inverter and reduction gear produces high torque
• NC control for setting the bending angle and the correction
• counter for high repeatability
• Mobile control panel with controls and pedals
• Fast tool change
• All shafts hardened and ground
• Material clamping is done manually
• Very good price / performance ratio

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• High quality steel knives with a hardness of HRC55-60
• Equipped with two control handles
• Front bearing surface with scale
• Up to 500 mm adjustable backgauge

• Motorised height adjustment of the work table
• Conveyor table with profile conveyor belt for optimum stability during transportduring processing
• NC control with 8" touch screen

Tehnilised andmed:

• Mootori võimsus: 1,2 kW.
• Toitepinge: 230 V / 50 Hz.
• Pöörlemiskiirus: 1000–2400 p/min, sujuvalt reguleeritav.
• Tööriista läbimõõt max: 105 mm.
• Tööriista laius: 50–100 mm.
• Lihvimislaius max: 100 mm.
• Võlli läbimõõt: 19 mm.
• Netokaal: 4,8 kg

Komplekti kuulub:

• Plastkohver.
• Kummist õhkrull.
• Õhupump kummirulli täitmiseks.
• Jäme viimistlusfliis-rull Ø 90 × 100 mm.
• Lihvhülss K60, mõõtudega 100 × 292 mm.
• Lihvhülss K100, mõõtudega 100 × 292 mm.
• Lihvhülss K180, mõõtudega 100 × 292 mm.
• Lihvlintide veorull.
• Takjakinnitusega viimistlusfliis 40 × 60 mm.
• Takjakinnitusega lihvlint K120, mõõtudega 40 × 600 mm.
• Takjakinnitusega veolint 30 × 700 mm.
• Peen viimistlusfliis-rull 105 × 100 × 19 mm.
• 10-osaline vaherõngaste komplekt 40 × 19 × 5 mm

• Smooth and powerful industrial electric motor
• Separate emergency stop impact switch
• Stable casting column
• Measurement scale for drilling depth
• Precisely machined drill table with diagonal T-slots and circumferential cooling water channel
• Drilling table 360 ​​° rotatable
• V-belt cover with safety switch
• V-belt quick-clamping device
• Long, ergonomic cast aluminum sleeve lever cast in one piece (B 16H / B 24H with softgrip handles)
• Massive, large base plate with grooves, strongly ribbed on the back
• By swinging away the drilling table, base plate can be used as a work surface for particularly high workpieces
• Guaranteed concentricity measured better than 0.015 mm in the drill quill
• Drill spindle with precision ball bearings
• High-quality OPTIMUM keyless chuck in the standard scope of delivery
• Large, height-adjustable protective screen with safety switch

• Smooth running thanks to ground multi-tooth driver
• Best power transmission through aluminum pulleys in conjunction with toothed GATES quality V-belt

• Two-column guided horizontal saw for sawing solid bars and bar profiles
• Mitsubishi FX 5 control system with simple operation via 7" touchscreen
• With 2000 mm material transporter as standard -> frequency-controlled feed via circulating spindle
• Cutting movement via hydraulic cylinder
• With BRP (cutting feed control) -> if a set ampere limit is exceeded, the feed movement is stopped while the saw blade continues to run in order to convey chips out of the cutting channel. Once the normal load is reached, the sawing process continues
• Automatic positioning after entering the desired angle
• Hydraulic clamping of the turntable enables precise angular cutting
• Robust machine body and the smallest possible distances between the saw blade, machine guide and workpiece minimize vibrations for maximum sawing performance
• Infinitely variable cutting speed from 15 - 150 m/min
• Saw blade drive via bevel gearbox, asynchronous motor and frequency converter
• For straight cuts, the material is clamped in front of and behind the cut using a two-part vice
• Pressure adjustment of the hydraulic vice clamping via control valve with pressure gauge
• Saw blade inclination of 7° and hydraulic saw blade tension increase the service life of the saw blade
• Front band guide moves automatically parallel to the movable vice jaw
• chip clearing brush driven via belt roller
• Emulsion cooling with liquid distribution into the saw blade guides and directly into the cutting channel
• Safety light barrier from LEUZE in front of the machine and the material transporter
• More powerful motor optionally available
• Saw blade guides with integrated cooling system