METALLKRAFT

• Foot operated
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp bending bar
• In series with manual adjustment of the bending angle
• Especially low-maintenance
• The workpiece is clamped by a motorized mechanism
• S-models with segmented upper tools
• SH-models with high, segmented casting foot tools

• Other models
• Standard tools hardened
• Hardened sharp bending bar and bending bar
• Segmented tools and hardened bending bar
• Segmented casting foot tools and bending bar hardened

• With foot control
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp-bending rail
• Seriesßig with manual adjustment of the bending angle
• Especially low-maintenance
• Clamping of the workpiece is motor-driven
• SH models with high, segmented cast base tools
• DUO models with continuous sharp-bending rail and high, segmented goat foot tools

• Standard tools hardened
• Sharp bending bar and bending bar hardened
• Segmented tools and bending bar hardened
• Segmented cast foot tools and bending bar hardened

• Increased stability due to improved design of the machine base, cylinder adjustment via handle and hand wheel, manometer on the machine side
• Suitable for assembly and straightening work as well as for workpiece checks or the pressing and pressing of bearings and other components
• Ideal for technical workshops, repair shops and technical training facilities
• With two piston speeds and pressure regulation by throttle screw
• Pressure gauge for pressure gauge
• Heavy machine frame welded from steel profiles to absorb the resulting compressive force of the cylinder
• The hydraulics work extremely precisely in both electrical and manual mode
• Adjustment of the cylinder via rack to handwheel
• Heavy and robust welded construction
• More extensive accessories
• Quality made in Europe

• Foot operated
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp bending bar
• In series with manual adjustment of the bending angle
• Especially low-maintenance
• The workpiece is clamped by a motorized mechanism
• S-models with segmented upper tools
• SH-models with high, segmented casting foot tools

• Other models
• Standard tools hardened
• Hardened sharp bending bar and bending bar
• Segmented tools and hardened bending bar
• Segmented casting foot tools and bending bar hardened

Tehnilised andmed:

• Maksimaalne töölaius: 1050 mm
• Maksimaalne painutusvõime alumiiniumil: 1,25 mm
• Maksimaalne painutusnurk: 135°
• Maksimaalne sügavus/laius: 570 mm
• Mõõtmed (P × L × K): 1250 × 500 × 970 mm
• Netokaal: 78 kg
• Käsitsi juhitav tooriku kinnitus
• Isemäärduvad liuglaagrid
• Reguleeritav ja fikseeritav painutusnurk suure kordustäpsuse saavutamiseks
• Võimalik täiendada kõrge ülemise tala, segmenteeritud ülemise tala või hanekael-tüüpi ülemise tala lisakomplektidega
• Versioon N = madala ülemise talaga teostus

• Powerful and quiet drive via LENZE gear motors with brake
• Compact, heavy and stress-free welded steel construction
• Sharp bending rail made of tool steel C50 at the clamping cheek
• Continuous, exchangeable bed support made of tool steel C50
• Continuous bending rail made of tool steel C50 at the bending beam
• Automatic pressure regulation of the clamping cheek via motor current pick-up
• Drive of the clamping cheek via generously dimensioned trapezoidal thread spindles
• Bending angle adjustment PT 1 via potentiometer on the machine front (right)
• Manual fine adjustment of bending beam with scale
• Manual crowning via pressure screws in the bending beam
• Foot remote control with emergency stop function
• All moving parts with low-maintenance bearings
• Electrical components from Schneider or Omron
• SH-models with high, segmented goat's foot tools
• Quality Made in Europe
• Available on request: Models in DUO design with continuous sharp bending rail and segmented goad foot tools, standard tools hardened, sharp bending rail and bending bar hardened, segmented tools and bending bar hardened, segmented goad foot tools and bending bar hardened

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 400 mm
• Precision flat steel guide attached to the rear of the roller conveyor
• Sturdy, 6-way ball-bearing material stop trolley, easy-moving, manually movable and lockable
• Stopper with reading magnifying glass facilitates reading on the mm scale
• Robust stop arm attached to the stop truck, adjustable to the tool (0 point)
• Quality Made in Germany

Working height up to 1020 mm possible with optional foot plates.

By request:

• Working height from 1020 mm can be extended from the factory
• Also with 500 mm web width

LMS 400 P on professionaalne manuaalne kergmetallide ketassaag alumiiniumi, värviliste metallide ja profiilide täpseks lõikamiseks. Varustatud pneumaatiliste kinnitite, suure saeketta ja pööratava saepeaga.

Tehnilised andmed:

• Tüüp: manuaalne kergmetallide ketassaag
• Kasutusala: alumiinium, värvilised metallid ja profiilmaterjalid
• Saeketta läbimõõt: 400 mm
• Toitepinge: 400 V
• Pneumaatilised materjalikinnitid
• Pööratav saepea nurklõigete tegemiseks
• Sobib profiilide, torude ja alumiiniumdetailide lõikamiseks
• Tugev tööstuslik konstruktsioon

Komplekti sisu:

• Metallkraft LMS 400 P kergmetallide ketassaag
• Pneumaatiline kinnitussüsteem
• Materjalikruustang
• Pikkusepiirik
• Kasutustööriistad
• Kasutusjuhend

• Segmented goat foot tool with quick-change system in the upper beam
• Segmented bending bar and bed support
• Backgauge up to 500mm
• Foot quick clamping for workpiece fixation
• Transport rollers with locking brake

• Segmented goat foot tool with quick-change system in the upper beam
• Segmented bending bar and bed support
• Backgauge up to 500mm
• Foot quick clamping for workpiece fixation
• Transport rollers with locking brake

Tehnilised andmed:

• Maksimaalne töölaius: 1270 mm
• Maksimaalne lehe paksus terase puhul: 2,0 mm (materjali tõmbetugevus 400 N/mm²)
• Maksimaalne lehe paksus alumiiniumi puhul: 2,4 mm
• Maksimaalne painutusnurk: 135°
• Ülemise tala avaus: kuni 25 mm
• Kõrgus: 1130 mm
• Netokaal: 340 kg
• Brutokaal: 420 kg
• Jalapedaaliga materjali kinnitamine, mis jätab mõlemad käed vabaks detaili käsitsemiseks
• Painutamist hõlbustav abisilinder
• Isemäärduvad liuglaagrid
• Reguleeritav painutusnurga piiraja
• Materjali paksuse reguleerimine rihvelkruvi abil
• Ülemise tala surve jõu reguleerimine libisemiskindlate käsikruvidega
• Varustatud segmenteeritud teravnurkpainutuse tööriistadega, pideva painutuslati ja pideva aluslatiga

• Two-column guided horizontal saw for sawing solid bars and bar profiles
• Mitsubishi FX 5 control system with simple operation via 4.3" touchscreen
• Cutting movement via hydraulic cylinder
• With BRP (cutting feed control) -> if a set ampere limit is exceeded, the feed movement is stopped while the saw blade continues to run in order to convey chips out of the cutting channel. Once the normal load is reached, the sawing process continues
• Automatic positioning after entering the desired angle
• Hydraulic clamping of the turntable enables precise angular cutting
• Robust machine body and the smallest possible distances between the saw blade, machine guide and workpiece minimize vibrations for maximum sawing performance
• Infinitely variable cutting speed from 15 - 150 m/min
• Saw blade drive via bevel gearbox, asynchronous motor and frequency inverter
• For straight cuts, the material is clamped in front of and behind the cut using a two-part vice
• Pressure adjustment of the hydraulic vice clamping via control valve with pressure gauge
• Saw blade inclination of 7° and hydraulic saw blade tension increase the service life of the saw blade
• Front band guide moves automatically parallel to the movable vice jaw
• chip clearing brush driven via belt roller
• Emulsion cooling with liquid distribution into the saw blade guides and directly into the cutting channel
• More powerful motor optionally available
• Saw blade guides with integrated cooling system

• Safe workpiece support thanks to solid and heavy-duty steel rollers
• Heavy three-legged version for highest load

• For supporting long and heavy workpieces
• Universally applicable for eg metal circular saws, band saws, woodworking machines, etc.
• Roller support infinitely height adjustable and clampable
• Safe workpiece support thanks to solid and heavy-duty steel rollers
• Heavy three-legged version for highest load

• User-friendly and energy-saving thanks to pneumatic drive
• Solid table with recessed scales and T-slots for precise adjustment of the pivoting stops
• Plexiglas finger guard for optimum view of the cutting edge

• Sturdy construction
• User-friendly and energy-saving thanks to pneumatic drive
• Solid table with recessed scales and T-slots for precise adjustment of the pivoting stops
• Plexiglas finger guard for optimum view of the cutting edge
• Operation via foot pedal

• Powerful motor and vibration-free operation for the best sanding results
• Continuous face sanding surface thanks to removable attachments enables sanding of even long workpieces
• With two belt speeds
• Quick-clamping system enables fast sanding belt changes
• One extraction nozzle each directly on the spark box and on the rear belt roller
• Can be used with and without suction
• Easy adjustment of the belt run via adjusting screw on the front contact roller
• Automatic retensioning of the sanding belt thanks to spring-loaded belt tensioning system
• Infinitely tiltable sanding unit
• Fold-away protective screen

Tehnilised andmed:

• Lõikevõime 0° ümartäismaterjal: Ø 550 mm.
• Lõikevõime 0° ristkülikprofiil: 550 × 500 mm.
• Pakilõikuse võimekus 0°: 550 × 460 mm.
• Saelindi kiirus: 15–150 m/min, sujuvalt reguleeritav.
• Saelindi mõõdud: 6200 × 41 × 1,3 mm.
• Saelindi kaldenurk: 7°.
• Minimaalne lõikepikkus: 15 mm.
• Minimaalne materjali läbimõõt: 10 mm.
• Minimaalne jääkdetaili pikkus: 40 mm.
• Töölaua kõrgus: 800 mm.
• Ajamimootori võimsus: 5,5 kW.
• Hüdraulikapumba võimsus: 0,75 kW.
• Jahutuspumba võimsus: 0,12 kW.
• Toitepinge: 400 V / 50 Hz.
• Mõõtmed (P × L × K): 4300 × 2030 × 2550 mm

Varustus:

• Mitsubishi FX5 juhtsüsteem 4,3" puuteekraaniga.
• Jahutuspump.
• Hüdrauliline saelindi pingutussüsteem.
• BRP lõikeetteande juhtimissüsteem.
• Hüdrauliline lõikeetteanne.
• Hüdrauliline saeraami tagasikäik.
• Pööratav juhtpult.
• Elektriajamiga laastupuhastushari.
• Kaheosaline hüdraulilise surve reguleerimisega kruustang, mis kinnitab materjali lõikekoha ees ja taga.
• LED-töövalgustus.
• Integreeritud jahutusega saelindi juhikud.

Tehnilised andmed:

• Mootori võimsus: 2,2 kW.
• Toitepinge: 400 V / 50 Hz.
• Lõikekiirus terasele: 15-120 m/min.
• Lõikekiirus värvilistele metallidele: 190-1500 m/min.
• Maksimaalne lõikekõrgus: 330 mm.
• Töölaua mõõtmed: 600 × 700 mm.
• Töölaua käik: 300 mm.
• Töölaua kallutus: 12° vasakule / 12° paremale.
• Töölaua maksimaalne kandevõime: 350 kg.
• Töö kõrgus: 990 mm.
• Maksimaalne ulatus (throat): 915 mm.
• Saelindi pikkus: 4990-5030 mm.
• Saelindi laius: 13-27 mm.
• Saelindi paksus: 0,65-0,9 mm.
• Rataste läbimõõt: 515 mm.
• Mõõtmed (P × L × K): 1760 × 810 × 2060 mm.
• Kaal: 815 kg.

Komplekti kuulub:

• Elektriline laua etteanne.
• Integreeritud saelindi keevitusseade.
• Ringlõikeseade.
• Nurklõike juhik.
• Pikijuhik.
• Suurendusklaas täppistöödeks.
• Töövalgusti.

• Powerful and quiet drive via LENZE gear motors with brake
• Compact, heavy and stress-free welded steel construction
• Sharp bending rail made of tool steel C50 at the clamping cheek
• Continuous, exchangeable bed support made of tool steel C50
• Continuous bending rail made of tool steel C50 at the bending beam
• Automatic pressure regulation of the clamping cheek via motor current pick-up
• Drive of the clamping cheek via generously dimensioned trapezoidal thread spindles
• Bending angle adjustment PT 1 via potentiometer on the machine front (right)
• Manual fine adjustment of bending beam with scale
• Manual crowning via pressure screws in the bending beam
• Foot remote control with emergency stop function
• All moving parts with low-maintenance bearings
• Electrical components from Schneider or Omron
• SH-models with high, segmented goat's foot tools
• Quality Made in Europe
• Available on request: Models in DUO design with continuous sharp bending rail and segmented goad foot tools, standard tools hardened, sharp bending rail and bending bar hardened, segmented tools and bending bar hardened, segmented goad foot tools and bending bar hardened

MKS 255 N Special Offer Set on professionaalne metalliketassaag terase, torude ja profiilmaterjalide täpseks lõikamiseks. Kahe lõikekiiruse, 45° pööratava saepea, jahutussüsteemi ja kiirkinnituskruustangidega masin sobib töökotta ja tootmisse.

Tehnilised andmed:

• Toitepinge: 400 V
• Võrgusagedus: 50 Hz
• Mootori võimsus: 0,95 / 1,32 kW
• Lõikekiirused: 40 / 80 p/min
• Saeketta mõõt: 250 × 2 × 32 mm
• Lõikenurk: -45° kuni +45°
• Saepea pööratav mõlemale poole kuni 45°
• Kiirkinnituskruustangid pööratavad mõlemale poole kuni 45°
• Kahekordse kinnitusega kruustang täpseks lõikamiseks
• Õlivannis töötav reduktor
• Automaatne membraanpump jahutusvedelikule
• Standardne jahutusvedeliku filter
• Liigutatav kaitsekate
• Juhtsüsteem madalpingel 24 V
• Avariiseiskamislüliti
• Pealüliti
• Kiirusevalik
• Ülekoormuskaitse
• Mõõdud (P × L × K): 800 × 830 × 755 mm
• Netokaal: 83 kg

Lõikevõime:

• Ümartäismaterjal 0°: 40 mm
• Ümartoru 0°: 70 mm
• Nelikanttoru 0°: 70 × 70 mm
• Ristküliktoru 0°: 55 × 95 mm
• Ümartäismaterjal -45°: 35 mm
• Ümartoru -45°: 65 mm
• Nelikanttoru -45°: 55 × 55 mm
• Ristküliktoru -45°: 55 × 60 mm
• Ümartäismaterjal +45°: 35 mm
• Ümartoru +45°: 65 mm
• Nelikanttoru +45°: 55 × 55 mm
• Ristküliktoru +45°: 55 × 60 mm

Komplekti sisu:

• Metallkraft MKS 255 N metalliketassaag
• Jahutussüsteem
• Pikkusepiirik 500 mm
• Kasutustööriistad
• Eripakkumise komplekti kuuluvad lisatarvikud

• Semi-motor version - manual operation of the upper cheek, bending process motorised
• Designed for professional use
• With foot operation
• heavy, compact weldment
• With continuous sharp bending rail
• Standard with manual adjustment of the bending angle by means of nonius ring
• Particularly low-maintenance
• S-models with segmented top tools
• SH models with high, segmented goat foot tools
• Hardening of standard tools available on request: sharp bending rail and bending strip hardened, segmented tools and bending strip hardened, segmented goat foot tools and bending strip hardened
• Further swivel bending machines available on request