METALLKRAFT

• For sawing hollow profiles and solid materials made of steel, stainless steel, tool steel, non-ferrous metals and plastic
• Robust band guides with adjustable carbide plates for a precise cut
• Hydraulically controlled system for both clamping vices and the up and down movement of the saw arm
• With chip clearing brush for optimum cleaning and maintenance of the saw band
• Saw arm inclined by 25°, This extends the service life of the saw blade
• BRP - saw blade monitoring
• The jaws of the two clamping vices are equipped with long-stroke hydraulic cylinders as standard, This eliminates the need for pre-setting to the material cross-section to be sawn
• With pivoting cutting gap for mitre adjustment - does not cut into the saw tableMaterial is fed
• via hydraulic cylindersBandsaw blade guides
• with integrated cooling
• systemSwivel plate
• with
• bearingsCutting probe function
• with integrated buttonWith
• digital angle displayWith
• pivoting control panel

Tehnilised andmed:

• Lõikeulatus 90° (ümar): Ø350 mm
• Lõikeulatus 90° (ristkülik): 500 × 340 mm
• Lõikeulatus +45°: 350 × 340 mm
• Lõikeulatus -45°: 380 × 340 mm
• Lõikeulatus -60°: 220 × 340 mm
• Lintsae kiirus: 20–100 m/min
• Lintsae mõõt: 4780 × 34 × 1,1 mm
• Materjali etteanne ühe sammuga: 1000 mm
• Maksimaalne materjali etteanne: 9999 mm
• Peamootori võimsus: 3,0 kW
• Hüdraulikapumba võimsus: 0,6 kW
• Jahutuspumba võimsus: 0,12 kW
• Koguvõimsus: 8,5 kW
• Toitepinge: 400 V
• Sagedus: 50 Hz
• Mõõtmed (P × L × K): 3030 × 3150 × 2000 mm
• Kaal: 2150 kg

Komplekti kuulub:

• Lintsaelint
• Jahutuspump
• Kasutustööriistad
• Töökoha valgustus
• Turvavalgustõke (safety light barrier)

• Material roller conveyor with stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel (optionally also available with plastic rollers)
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 450 mm
• Length measuring device with handwheel adjustment
• Roller and measuring track with digital LED dimension display in mm, electrical connection 230 V, 50 Hz with power supply unit
• Measuring stop adjustable by handwheel from the workplace, with pneumatic brake for measuring fixation
• Sturdy material stop trolley, 12 ball bearings, movable on large dimensioned guide profile. The stop arm is adjustable and hinged.
• For roller conveyors with a length of more than 5 m, a cable drag chain is used
• Mounting side as desired right or left

Equipment details

position indicator

• 5-digit LED measurement display for constant, millimeter-accurate control of the current position of the stop car
• Position indicator with hollow shaft encoder mounted directly on the drive shaft
• Measuring accuracy / m: ± 0.5 mm

stop arm

• 900 mm long stop arm
• Stop plate adjustable to zero point and manually hinged backwards
• Multiple ball bearings, thus free of play
• Quality Made in Germany

• Very heavy and robust welded construction
• Dynamic drive of the bending beam by means of two frequency-controlled motors with gears
• Over cheek clamping via trapezoidal thread
• High-quality Lenze motors
• Continuous sharp bending rail
• Tools suitable for bending stainless steel
• Bending angle adjustment via touchscreen NC control system
• Sheet thickness adjustment manually at the bending beam
• Manual crowning device of the bending beam
• Operation via double foot pedal with emergency stop function
• Clean motor-driven machine without hydraulics
• SH models with segmented, high goat foot tools
• DUO models with continuous sharp-bending rail and high, segmented goat foot tools

• The workpiece clamping by means of foot pedal thereby both hands remain free for the material supply
• Different tool variants available E, S2, HS2 and HSG
• The powerful auxiliary cylinder facilitates bending
• Next passage between top and bottom cheek of up to 25 mm
• Self-lubricating plain bearings
• Clamping pressure of the upper beam via non-slip thumbscrews easily adjustable
• Adjustment of material thickness by means of knurled screw
• Adjustable stop for bending angle

• With segmented sharp-bending tools, continuous bending strip and continuous bed support

• With segmented sharpening tools, segmented bending strip and continuous bed support

• With segmented gooseneck tools, segmented bending bar and segmented bed support
• Segments have a hardness of HRC24-26

• Sheet thickness max.: Performance data based on material with tensile strength 400 N/mm²
• Bending capacity VA: factor 0.75
• Bending capacity aluminum: factor 1.2
• Hardened top tools are required to bend VA

• Foot operated
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp bending bar
• In series with manual adjustment of the bending angle
• Especially low-maintenance
• The workpiece is clamped by a motorized mechanism
• S-models with segmented upper tools
• SH-models with high, segmented casting foot tools

• Other models
• Standard tools hardened
• Hardened sharp bending bar and bending bar
• Segmented tools and hardened bending bar
• Segmented casting foot tools and bending bar hardened

• Sturdy and robust welded construction
• Due to the foot control both hands remain free for the material supply
• High quality cutting blades
• Angle adjustable side stop with millimeter scale
• Easy adjustment of the knife bar
• Highest possible safety through hold-down, which protects the fingers at the same time.
• Up to 500 mm adjustable backgauge

• Material roller conveyor with stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel (optionally also available with plastic rollers)
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 450 mm
• Length measuring device with handwheel adjustment
• Roller and measuring track with digital LED dimension display in mm, electrical connection 230 V, 50 Hz with power supply unit
• Measuring stop adjustable by handwheel from the workplace, with pneumatic brake for measuring fixation
• Sturdy material stop trolley, 12 ball bearings, movable on large dimensioned guide profile. The stop arm is adjustable and hinged.
• For roller conveyors with a length of more than 5 m, a cable drag chain is used
• Mounting side as desired right or left

Equipment details

position indicator

• 5-digit LED measurement display for constant, millimeter-accurate control of the current position of the stop car
• Position indicator with hollow shaft encoder mounted directly on the drive shaft
• Measuring accuracy / m: ± 0.5 mm

stop arm

• 900 mm long stop arm
• Stop plate adjustable to zero point and manually hinged backwards
• Multiple ball bearings, thus free of play
• Quality Made in Germany

• Handy and flexible pipe grinder for locksmiths, metalworking and railing construction
• Designed for grinding and polishing pipe constructions
• Especially suitable for sanding, satin finishing and mirror polishing of already mounted railings
• Ideal for working in confined spaces, as the handle can be turned through 180 °
• Heavy duty motor with soft start and overload protection
• With constant electronics for consistent belt speed even under load
• With stepless adjustment of the belt speed for an optimal adaptation to the different applications
• Speed ​​can be adjusted comfortably via the thumb wheel on the handle
• Simple, tool-free grinding belt change
• 360 ° circumferential grinding takes only two working steps
• High-quality 270 ° light metal arm with 2 pulleys
• Handle can be screwed in at three different positions for optimal handling

Tehnilised andmed:

• Maksimaalne töölaius: 1300 mm
• Maksimaalne painutusnurk: 135°
• Alumiiniumi painutusvõime: 1,2 mm
• Mõõdud (P × L × K): 1480 × 500 × 970 mm
• Maksimaalne laius/sügavus: 570 mm
• Netokaal: 88 kg
• Brutokaal: 86 kg
• Detaili kinnitamine toimub käsitsi klambrite abil
• Lihtne painutusnurga seadistamine tagab suure kordustäpsuse
• Isemäärduvad liuglaagrid

• Increased stability due to improved design of the machine base, cylinder adjustment via handle and hand wheel, manometer on the machine side
• Suitable for assembly and straightening work as well as for workpiece checks or the pressing and pressing of bearings and other components
• Ideal for technical workshops, repair shops and technical training facilities
• With two piston speeds and pressure regulation by throttle screw
• Pressure gauge for pressure gauge
• Heavy machine frame welded from steel profiles to absorb the resulting compressive force of the cylinder
• The hydraulics work extremely precisely in both electrical and manual mode
• Adjustment of the cylinder via rack to handwheel
• Heavy and robust welded construction
• More extensive accessories
• Quality made in Europe

• Suitable for cutting steel and non-ferrous metals
• Heavy, stress-free welded steel construction
• High quality knife
• Sheet metal support arms for large workpieces
• Cut line illumination and long holes in the upper cover plate for an optimal view of the cutting edge for cutting on scratches
• Manual back gauge 630 mm with millimeter precision adjustment
• Photocell for the backgauge area
• The foot control leaves both hands free for the material supply

• Simple operation
• Heavy, compact welded construction
• Particularly low maintenance
• For easy bending with precise adjustment of the bending angle using a stop with scale
• Sheet thickness adjustable via bending beam
• Tools for VA on request: sharp bending rail and bending bar made of Toolox 33, segmented tools and bending bar made of Toolox 33 and segmented goat foot tools made of Toolox 33
• Quality Made in Europe

• Foot operated
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp bending bar
• In series with manual adjustment of the bending angle
• Especially low-maintenance
• The workpiece is clamped by a motorized mechanism
• S-models with segmented upper tools
• SH-models with high, segmented casting foot tools

• Other models
• Standard tools hardened
• Hardened sharp bending bar and bending bar
• Segmented tools and hardened bending bar
• Segmented casting foot tools and bending bar hardened

• For all repair and assembly work, eg: straightening axles, girders, shafts, etc .; Pressing and pressing bearings, bolts and bushings; Pressing and squeezing work; Load tests and welding sample tests; and much more.
• Stable welded construction
• Robust frame with perforation for the adjustment of the work table
• Reliable, particularly precise hydraulic from European production
• Pressure build-up by hand or foot operation of the pump lever
• By foot pump both hands free for fixation of the workpiece
• Pressing pressure readable via manometer
• With automatic return of the piston
• With safety valve to protect against overload
• Quality Made in Europe

• For processing flat material, pressing in bearings, bolts and the like, be sure to use the optional perforated plates.

• Roller and guideway system on which lighter wood, metal or plastic profiles can be precisely sawed, drilled or milled
• Substructure made of solid 3 mm steel profiles, painted and with adjustable feet
• Support rollers made of galvanized steel (optionally also available with plastic rollers)
• With length stop, magnetic tape measuring system with digital display, measuring accuracy +/- 0.2 mm per meter
• Stop car is 4-roller bearings, thus manually easily displaced
• Adjustable stop arm and can be folded away to the rear
• The maximum measuring length is the length of the web minus the stop length of 250 mm
• Quality Made in Germany

MTBS 2103 F mootoriga giljotiin professionaalseks lehtmetalli lõikamiseks. Töölaius 2040 mm, lõikevõime kuni 3 mm terasel, digitaalne tagapiirik, LED-lõikejoone valgustus ja võimas 3 kW mootor.

Tehnilised andmed:

• Töölaius: 2040 mm
• Maksimaalne lõikevõime terasel (400 N/mm²): 3 mm
• Maksimaalne lõikevõime roostevabal terasel (700 N/mm²): 1,5 mm
• Lõigete arv minutis: 34
• Lõikenurk: 2,4°
• Tagapiiriku reguleerimisulatus: kuni 550 mm
• Mootori võimsus: 3 kW
• Toitepinge: 400 V / 50 Hz
• Mõõtmed (P × L × K): 2620 × 1800 × 1500 mm
• Netokaal: 1300 kg
• Õhukulu tsükli kohta: 4 l
• Tagapiiriku juhtimine: käsiratas ja digitaalne näidik masina esiküljelt
• Väljatõmmatavad eesmised tuged: jah
• Töölaua mõõteskaala: 10 mm gradueeringuga

Komplekti sisu:

• MTBS 2103 F mootoriga giljotiin
• Eest juhitav manuaalne tagapiirik digitaalse näidikuga
• 90° külgpiirik pikkusega 1000 mm
• LED-lõikejoone valgustus
• Jalapedaal hädaseiskamisfunktsiooniga
• Väljatõmmatavad eesmised lehetoed
• Pööratavad lõiketerad roostevaba terase lõikamiseks
• Töölaua mõõteskaala
• Valgusbarjääriga kaitstud tagumine ala

• Control with 49 programs with each 99 possible individual steps
• Two cutting speeds
• Machine head guided vertically, with dovetail guide and adjustable wedge strip
• Machine head can be swiveled 45° to the left and 45° to the right, with locking at 45°, 0°, -45°
• Stable and robust construction
• Simple and intuitive operation
• Adjustable depth stop for the vertical stroke of the saw head
• Reduction gear, silent in oil bath running
• Coolant pump with coolant filter
• Coolant distribution for better lubrication
• Transversely movable hydraulic quick-action vice with anti-jaw device
• Chip breaker T6 for blade cleaning
• Electrical system in low voltage 24 volts, with emergency stop switch, main switch, speed selector switch, undervoltage release and overload protection
• Quality Made in Europe

• Material feed
• Closing the vice and activating the motor
• Activation of the coolant pump and lowering of the saw head for cutting
• Return of the feed carriage to the specified dimension
• Return of the saw head to starting position
• Opening the vise
• Repeat cycle

MTBS 1350-30 B mootoriga giljotiin NC-juhitava tagapiirikuga. Töölaius 1350 mm, lõikevõime kuni 3 mm terasel, LED-lõikejoone valgustus, reguleeritav lõikevahe ja võimas 3 kW mootor professionaalseks metallitööks.

Tehnilised andmed:

• Töölaius: 1350 mm
• Maksimaalne lõikevõime terasel (400 N/mm²): 3,0 mm
• Maksimaalne lõikevõime roostevabal terasel (700 N/mm²): 1,5 mm
• Lõigete arv minutis: 40
• Lõikenurk: 2,2°
• Tagapiiriku reguleerimisulatus: kuni 750 mm
• Tagapiirik: mootoriga, NC-juhitav
• Tagapiiriku ajam: sagedusmuundur, pidurmootor ja kuulkruvid
• Mootori võimsus: 3 kW
• Toitepinge: 400 V / 50 Hz
• Õhukulu tsükli kohta: 4 l
• Mõõtmed (P × L × K): 1920 × 1920 × 1110 mm
• Netokaal: 1150 kg
• Töölaua tugi roostevabast terasest: jah

Komplekti sisu:

• MTBS 1350-30 B mootoriga giljotiin
• NC-juhitav tagapiirik (reguleerimisulatus kuni 750 mm)
• 90° külgpiirik pikkusega 1000 mm
• Kaks tugevat lehetuge T-soonte ja kallutuskambritega
• LED-lõikejoone valgustus
• Reguleeritav lõikevahe
• Jalapedaaliga mobiilne juhtkonsool koos hädaseiskamisnupuga
• Pööratavad lõiketerad roostevaba terase lõikamiseks
• Survetala kummist kaitsesisestega
• Valgusbarjääriga kaitstud tagumine ala

• Increased stability due to improved design of the machine base, cylinder adjustment via handle and hand wheel, manometer on the machine side
• Suitable for assembly and straightening work as well as for workpiece checks or the pressing and pressing of bearings and other components
• Ideal for technical workshops, repair shops and technical training facilities
• With two piston speeds and pressure regulation by throttle screw
• Pressure gauge for pressure gauge
• Heavy machine frame welded from steel profiles to absorb the resulting compressive force of the cylinder
• The hydraulics work extremely precisely in both electrical and manual mode
• Adjustment of the cylinder via rack to handwheel
• Heavy and robust welded construction
• More extensive accessories
• Quality made in Europe