METALLKRAFT

MKS 315 N on professionaalne metalliketassaag kahe lõikekiiruse, 45° pööratava saepea ja jahutussüsteemiga. Sobib terase, torude ja profiilide täpseks lõikamiseks tootmises ja metallitöökojas. 

Tehnilised andmed:

• Toitepinge: 400 V
• Võrgusagedus: 50 Hz
• Mootori võimsus: 1,5 / 2,2 kW
• Lõikekiirused: 40 / 80 p/min
• Saeketta läbimõõt: 315 mm
• Lõikenurk: -45° kuni +45°
• Saepea pööratav 45° vasakule ja 45° paremale
• Kiirkinnituskruustangid pööratavad 45° mõlemale poole
• Pikisuunas nihutatav kruustang piki- ja pilulõigete tegemiseks
• Õlivannis töötav reduktor
• Automaatne membraanpump jahutusvedelikule
• Standardne jahutusvedeliku filter
• Liigutatav kaitsekate
• Juhtsüsteem madalpingel 24 V
• Avariiseiskamislüliti
• Pealüliti
• Kiirusevalik
• Ülekoormuskaitse
• Mõõdud (P × L × K): 1000 × 1150 × 1475 mm
• Netokaal: 165 kg
• Brutokaal: 165 kg

Lõikevõime:

• Ümartäismaterjal 0°: 55 mm
• Ümartoru 0°: 90 mm
• Nelikanttoru 0°: 0 × 80 mm
• Ristküliktoru 0°: 115 × 70 mm
• Ümartäismaterjal -45°: 50 mm
• Ümartoru -45°: 80 mm
• Nelikanttoru -45°: 70 × 70 mm
• Ristküliktoru -45°: 70 × 70 mm
• Ümartäismaterjal +45°: 50 mm
• Ümartoru +45°: 80 mm
• Nelikanttoru +45°: 70 × 70 mm
• Ristküliktoru +45°: 70 × 70 mm

Komplekti sisu:

• Metallketassaag Metallkraft MKS 315 N
• Jahutussüsteem
• Pikkuspiirik 500 mm
• Kasutustööriistad

• Saeketas ei kuulu komplekti
• Alusraam ei kuulu komplekti 

MKS 250 N komplekt sisaldab professionaalset manuaalset metalliketassaagi ning tööks vajalikke lisatarvikuid. Sobib terase täpseks lõikamiseks töökojas ja tootmises.

Tehnilised andmed:

• Tüüp: manuaalne metalliketassaag komplektina
• Toitepinge: 230 V
• Võimsus: 1,1 kW
• Võrgusagedus: 50 Hz
• Saeketta läbimõõt: 250 mm
• Saeketta pöörlemiskiirus: 40 p/min
• Lõikenurk: kuni ±45°
• Pööratav saepea
• Kiirkinnituskruustangid
• Integreeritud jahutussüsteem
• Õlivannis töötav reduktor
• Madalpinge juhtimissüsteem 24 V
• Avariiseiskamislüliti
• Ülekoormuskaitse
• Mõõdud (P × L × K): 800 × 830 × 755 mm
• Netokaal: 83 kg
• Brutokaal: 91 kg

Komplekti sisu:

• Metallketassaag MKS 250 N
• Jahutussüsteem
• Pikkusepiirik 500 mm
• Kasutustööriistad
• Eripakkumise komplekti kuuluvad lisatarvikud (vastavalt tootja komplekteeringule)

• Stepless adjustment of belt speed
• No need to set the upper end point with the cut-off button
• Efficient coolant application on the saw band guides
• Monitoring of the saw blade run by BRP system
• Monitoring the saw blade tension
• Longer service life of saw blade due to saw arm inclination of 25 °

• For sawing pipes and solid materials made of steel, stainless steel, tool steel, non-ferrous metals and plastic
• Mitre adjustment from -45° to +60°, user-friendly adjustment from the front for better handling, especially with attached roller conveyor
• Bearing-mounted turntable
• Infinitely variable adjustment of the belt speed
• Robust belt guides with adjustable carbide plates for a precise cut
• Longer service life of the saw blade thanks to 25° saw arm inclination
• Saw blade guides with integrated cooling system
• BRP saw blade monitoring stops the feed of the saw frame if the saw blade motor is overloaded by chips in the cutting channel; once the chips have been removed by the running saw blade, the feed continues automatically
• Electromechanical monitoring of the saw blade tension, a microswitch switches the machine off in the event of deviations
• Chip clearing brush for optimum cleaning and maintenance of the saw blade
• Hydraulic clamping vice
• Saw frame can be lowered hydraulically
• With swivel-mounted control panel
• Cut sensing function with integrated button

• Automatic workpiece clamping after the start of the cutting cycle
• Execution of the saw cut at the selected belt speed
• Automatic stop of the lowering movement and the saw blade in the lower end position
• Automatic return of the saw arm to its upper end position
• Vice opens automatically
• Operator only has to move the material

• Powerful motors with vibration-free running to achieve the best sanding results
• Working height can be adjusted thanks to the infinitely variable inclination of the sanding unit
• Continuous flat sanding surface enables sanding of even long workpieces
• Suction nozzle on the rear belt roller
• Sanding belt can be changed in seconds thanks to quick-release system

• Powerful motors with vibration-free running to achieve the best sanding results
• Working height can be adjusted by infinitely variable inclination of the sanding unit
• Angle-adjustable workpiece support
• Continuous flat sanding surface enables sanding even of long workpieces
• One extraction nozzle on the spark box and one on the rear belt roller
• Protective screen can be folded away
• Sanding belt can be changed in seconds thanks to quick-release system
• Easy adjustment of the belt run via adjusting screw on the front contact roller
• Motor with brake and circuit breaker

• Material roller conveyor with stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel (optionally also available with plastic rollers)
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 450 mm
• Length measuring device with handwheel adjustment
• Roller and measuring track with digital LED dimension display in mm, electrical connection 230 V, 50 Hz with power supply unit
• Measuring stop adjustable by handwheel from the workplace, with pneumatic brake for measuring fixation
• Sturdy material stop trolley, 12 ball bearings, movable on large dimensioned guide profile. The stop arm is adjustable and hinged.
• For roller conveyors with a length of more than 5 m, a cable drag chain is used
• Mounting side as desired right or left

Equipment details

position indicator

• 5-digit LED measurement display for constant, millimeter-accurate control of the current position of the stop car
• Position indicator with hollow shaft encoder mounted directly on the drive shaft
• Measuring accuracy / m: ± 0.5 mm

stop arm

• 900 mm long stop arm
• Stop plate adjustable to zero point and manually hinged backwards
• Multiple ball bearings, thus free of play
• Quality Made in Germany

• Suitable for cutting metals, cardboard and other materials.
• Extremely stable and robust construction made of cast iron
• Bronze bearing blades made of cold work steel K2379
• Hardened, resharpenable and adjustable knives

• Suitable for cutting metals, cardboard and other materials
• Extremely stable and robust construction made of cast iron
• Bronze-plated knives made of cold-work steel K2379
• Hardened, regrindable and adjustable knives

• The workpiece clamping by means of foot pedal thereby both hands remain free for the material supply
• Different tool variants available E, S2, HS2 and HSG
• The powerful auxiliary cylinder facilitates bending
• Next passage between top and bottom cheek of up to 25 mm
• Self-lubricating plain bearings
• Clamping pressure of the upper beam via non-slip thumbscrews easily adjustable
• Adjustment of material thickness by means of knurled screw
• Adjustable stop for bending angle

• With segmented sharp-bending tools, continuous bending strip and continuous bed support

• With segmented sharpening tools, segmented bending strip and continuous bed support

• With segmented gooseneck tools, segmented bending bar and segmented bed support
• Segments have a hardness of HRC24-26

• Sheet thickness max.: Performance data based on material with tensile strength 400 N/mm²
• Bending capacity VA: factor 0.75
• Bending capacity aluminum: factor 1.2
• Hardened top tools are required to bend VA

MKS 275 N Special Offer Set on professionaalne metalliketassaag terase, torude ja profiilmaterjalide täpseks lõikamiseks. Kahe lõikekiiruse, 45° pööratava saepea, jahutussüsteemi ja kiirkinnituskruustangidega masin sobib intensiivseks tööstuslikuks kasutuseks.

Tehnilised andmed:

• Toitepinge: 400 V
• Võrgusagedus: 50 Hz
• Mootori võimsus: 1,1 / 1,5 kW
• Saeketta läbimõõt: 275 mm
• Lõikekiirused: 40 / 80 p/min
• Lõikenurk: -45° kuni +45°
• Saepea pööratav mõlemale poole kuni 45°
• Kiirkinnituskruustangid pööratavad mõlemale poole kuni 45°
• Kahekordse kinnitusega kruustang täpseks ja madala kraadiga lõikamiseks
• Õlivannis töötav reduktor
• Automaatne membraanpump jahutusvedelikule
• Standardne jahutusvedeliku filter
• Liigutatav kaitsekate
• Juhtsüsteem madalpingel 24 V
• Avariiseiskamislüliti
• Pealüliti
• Kiirusevalik
• Ülekoormuskaitse
• Mõõdud (P × L × K): 830 × 900 × 1025 mm
• Netokaal: 98 kg

Lõikevõime:

• Ümartäismaterjal 0°: 45 mm
• Ümartoru 0°: 80 mm
• Nelikanttoru 0°: 80 × 80 mm
• Ristküliktoru 0°: 70 × 100 mm
• Ümartäismaterjal -45°: 40 mm
• Ümartoru -45°: 80 mm
• Nelikanttoru -45°: 70 × 70 mm
• Ristküliktoru -45°: 70 × 80 mm
• Ümartäismaterjal +45°: 40 mm
• Ümartoru +45°: 80 mm
• Nelikanttoru +45°: 70 × 70 mm
• Ristküliktoru +45°: 70 × 80 mm

Komplekti sisu:

• Metallkraft MKS 275 N metalliketassaag
• Jahutussüsteem
• Pikkusepiirik 500 mm
• Kasutustööriistad
• Eripakkumise komplekti kuuluvad lisatarvikud

MKS 316 V on professionaalne vertikaalne metalliketassaag kahe lõikekiiruse, kuni 60° pöördenurga ja jahutussüsteemiga. Sobib eriti hästi roostevaba terase, torude ja profiilmaterjalide täpseks lõikamiseks. 

Tehnilised andmed:

• Tüüp: manuaalne vertikaalne metalliketassaag
• Toitepinge: 400 V
• Võrgusagedus: 50 Hz
• Mootori võimsus: 1,3 / 1,9 kW
• Saeketta läbimõõt: 315 mm
• Lõikekiirused: 17 / 34 p/min
• Lõikenurk: -45° kuni +60°
• Vertikaalselt juhitud saepea reguleeritava kiillati ja pääsusaba-juhikuga
• Reguleeritav sügavuspiirik saepea vertikaalse käigu jaoks
• Ristisuunas liigutatav kruustang koos kraadivastase seadmega
• Kahe lõikekiirusega ajam
• Jahutuspump koos jahutusvedeliku filtriga
• Jahutusvedeliku suunaja saeketta paremaks määrimiseks
• Laastumurdja saeketta puhastamiseks
• Õlivannis töötav reduktor
• Juhtsüsteem madalpingel 24 V
• Avariiseiskamislüliti
• Pealüliti
• Kiirusevalik
• Ülekoormuskaitse
• Mõõdud (P × L × K): 1500 × 650 × 1700 mm
• Netokaal: 270 kg
• Brutokaal: 270 kg

Sobib eriti hästi roostevaba terase lõikamiseks tänu madalatele lõikekiirustele.

Lõikevõime:

• Ümartäismaterjal 0°: 70 mm
• Ümartoru 0°: 100 mm
• Nelikanttoru 0°:90 × 90 mm
• Ristküliktoru 0°: 135 × 80 mm
• Ümartäismaterjal -45°: 70 mm
• Ümartoru -45°: 100 mm
• Nelikanttoru -45°: 90 × 90 mm
• Ristküliktoru -45°: 100 × 80 mm
• Ümartäismaterjal +45°: 70 mm
• Ümartoru +45°: 80 mm
• Nelikanttoru +45°: 70 × 70 mm
• Ristküliktoru +45°: 70 × 80 mm

Komplekti sisu:

• Metallketassaag Metallkraft MKS 316 V
• Jahutusseade koos filtrga
• Materjalitugi rullikuga
• Pikkusepiirik 500 mm
• Kasutustööriistad
• Laastueemaldi
• Saeketas ei kuulu komplekti 

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• Feed / discharge roller conveyor
• Roller conveyor without scale and stop with side guide
• Quality Made in Germany

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 400 mm
• Precision flat steel guide attached to the rear of the roller conveyor
• Sturdy, 6-way ball-bearing material stop trolley, easy-moving, manually movable and lockable
• Stopper with reading magnifying glass facilitates reading on the mm scale
• Robust stop arm attached to the stop truck, adjustable to the tool (0 point)
• Quality Made in Germany

Working height up to 1020 mm possible with optional foot plates.

By request:

• Working height from 1020 mm can be extended from the factory
• Also with 500 mm web width

• Punching station, flat steel shears, angle steel shears, sectional steel shears, available with notching station starting from HPS 45S
• DS series with two working cylinders and two foot pedals for simultaneous use with punching station and sectional steel shears
• Stepless adjustment of the stroke
• Larger reach for punching station with 620 mm optional, available from HPS 55DS
• Heavy and rigid welded construction
• Standard with notching knife starting from HPS 45S
• With powerful 400 Volt motor
• V-notching knife, oversized punching device and larger throat depth for punching station available on request
• Two-stage foot pedal for inching operation
• Stamps and dies No. 1, No. 2, No. 3, No. 30, No. 45, No. 60 can be used with the standard delivery scope of the machine. Use of punch and die No. 4 and No. 80 optional (except HPS 40S)

Advantages of punching over drilling:

• High time savings - cycle times
• No chips
• No cooling

Note:

• All hydraulic sectional shears are delivered with oil

• Direct magnetic belt measuring system
• Delivery of direct magnetic belt measuring system including display unit Z58
• Independent stop carriage and length measuring drives
• Dimension is displayed via display unit Z58
• Sensor head mounted directly on the stop carriage
• Dimensional and repetition accuracy ± 0.1 mm per metre
• Cable and air ducting via energy drag chain

• Direct magnetic belt measuring system
• Delivery of direct magnetic belt measuring system including display unit Z58
• Independent stop carriage and length measuring drives
• Dimension is displayed via display unit Z58
• Sensor head mounted directly on the stop carriage
• Dimensional and repetition accuracy ± 0.1 mm per metre
• Cable and air ducting via energy drag chain

• Direct magnetic belt measuring system
• Delivery of direct magnetic belt measuring system including display unit Z58
• Independent stop carriage and length measuring drives
• Dimension is displayed via display unit Z58
• Sensor head mounted directly on the stop carriage
• Dimensional and repetition accuracy ± 0.1 mm per metre
• Cable and air ducting via energy drag chain

• For sawing hollow profiles and solid materials made of steel, stainless steel, tool steel, non-ferrous metals and plastic
• Mitre adjustment from -45° to +60°, user-friendly adjustment from the front for better handling, especially with attached roller conveyor
• Robust band guides with adjustable carbide plates for a precise cut
• Saw blade guides with integrated cooling system
• Electromechanical monitoring of the saw blade tension via microswitch
• With chip clearing brush for optimum cleaning and maintenance of the saw blade
• When the saw arm is raised, the lowering cylinder locks automatically in the upper position - no additional locking on the cylinder is required
• Saw arm tilted by 25°, thus extending the service life of the saw blade
• The saw blade stops automatically at the end of the cutting process
• Lowering of the saw arm by gravity or manually (H-DG)
• Turntable with swiveling cutting gap: No cutting into the saw table, therefore always a flat contact surface and therefore greater cutting accuracy
• Ergonomic operating concept
• Clamping lever for angle adjustment from the front: faster adjustment of the cutting angle
• Mounting adapter for roller conveyors included in the scope of delivery
• Vice with quick clamping device

• For precision surface grinding
• Maximum stiffness and stability thanks to tension-free re-heated and hardened cast iron construction
• High-quality spindle with precision cone roller bearings (circular accuracy 2 microns)
• Electromagnetic clamping plate for fixing the workpiece including automatic demagnetization function
• Automatic central lubrication for all slides and spindles
• Hand scraped and Turcite-B-coated V-flat guides guarantee extremely uniform, low-friction movement and highest precision
• Halogen working light dustproof, completely contact-proof and protected against jet water according to IP65
• Second grinding wheel flange included in delivery

• Roller and guideway system on which lighter wood, metal or plastic profiles can be precisely sawed, drilled or milled
• Substructure made of solid 3 mm steel profiles, painted and with adjustable feet
• Support rollers made of galvanized steel (optionally also available with plastic rollers)
• With length stop, magnetic tape measuring system with digital display, measuring accuracy +/- 0.2 mm per meter
• Stop car is 4-roller bearings, thus manually easily displaced
• Adjustable stop arm and can be folded away to the rear
• The maximum measuring length is the length of the web minus the stop length of 250 mm
• Quality Made in Germany

• Suitable for wet grinding machines
• Filter area visible through transparent plastic windows

• Suitable for wet grinding machines
• Filter area visible through transparent plastic windows