METALLKRAFT

• two cutting speeds
• rotatable machine head at 45 ° to the left and 45 ° to the right
• Reduction gear, silent in oil bath running
• automatic membrane coolant pump with coolant filter
• Vise with counter vise, quick release and anti-jaw clamping jaws guarantees a precise and burr-free cut
• lateral material support arm with roller
• Vice can be swiveled 45 ° to the left and 45 ° to the right
• movable protection device ensures optimum safety when cutting
• Control handle with safety switch
• Vise with counter vise, quick release and anti-jaw clamping jaws
• lateral material support arm with roller
• Vise longitudinally displaceable and thus suitable for longitudinal cuts and slits
• Quality Made in Europe

• Changing the sanding belt in seconds due to the quick-release system
• Automatic re-tensioning of the sanding belt using the spring-loaded belt tensioning system
• Easy adjustment of the belt run using the adjusting screw
• Can be used as a table model and also as a standing model with the optional base

• Powerful motors and vibration-free operation for the best sanding results
• Sanding belt can be changed in seconds thanks to the quick-clamping system
• Automatic retensioning of the sanding belt thanks to spring-supported belt tensioning system
• Large surface sanding area thanks to fold-away upper sanding belt cover
• Easy adjustment of the belt run via adjusting screw on the front contact roller
• Continuous sanding surface after removal of attachments enables sanding of long workpieces as well
• Can be used with and without suction
• One extraction nozzle on the spark box and one on the rear belt roller
• Protective screen can be folded away
• Can be used as a table model and, with the optional base, also as a floor model

• Material roller conveyor with stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel (optionally also available with plastic rollers)
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 450 mm
• Length measuring device with handwheel adjustment
• Roller and measuring track with digital LED dimension display in mm, electrical connection 230 V, 50 Hz with power supply unit
• Measuring stop adjustable by handwheel from the workplace, with pneumatic brake for measuring fixation
• Sturdy material stop trolley, 12 ball bearings, movable on large dimensioned guide profile. The stop arm is adjustable and hinged.
• For roller conveyors with a length of more than 5 m, a cable drag chain is used
• Mounting side as desired right or left

Equipment details

position indicator

• 5-digit LED measurement display for constant, millimeter-accurate control of the current position of the stop car
• Position indicator with hollow shaft encoder mounted directly on the drive shaft
• Measuring accuracy / m: ± 0.5 mm

stop arm

• 900 mm long stop arm
• Stop plate adjustable to zero point and manually hinged backwards
• Multiple ball bearings, thus free of play
• Quality Made in Germany

• The workpiece clamping by means of foot pedal thereby both hands remain free for the material supply
• Different tool variants available E, S2, HS2 and HSG
• The powerful auxiliary cylinder facilitates bending
• Next passage between top and bottom cheek of up to 25 mm
• Self-lubricating plain bearings
• Clamping pressure of the upper beam via non-slip thumbscrews easily adjustable
• Adjustment of material thickness by means of knurled screw
• Adjustable stop for bending angle

• With segmented sharp-bending tools, continuous bending strip and continuous bed support

• With segmented sharpening tools, segmented bending strip and continuous bed support

• With segmented gooseneck tools, segmented bending bar and segmented bed support
• Segments have a hardness of HRC24-26

• Sheet thickness max.: Performance data based on material with tensile strength 400 N/mm²
• Bending capacity VA: factor 0.75
• Bending capacity aluminum: factor 1.2
• Hardened top tools are required to bend VA

• Foot operated
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp bending bar
• In series with manual adjustment of the bending angle
• Especially low-maintenance
• The workpiece is clamped by a motorized mechanism
• S-models with segmented upper tools
• SH-models with high, segmented casting foot tools

• Other models
• Standard tools hardened
• Hardened sharp bending bar and bending bar
• Segmented tools and hardened bending bar
• Segmented casting foot tools and bending bar hardened

• Simple operation
• Heavy, compact welded construction
• Particularly low maintenance
• For easy bending with precise adjustment of the bending angle using a stop with scale
• Sheet thickness adjustable via bending beam
• Tools for VA on request: sharp bending rail and bending bar made of Toolox 33, segmented tools and bending bar made of Toolox 33 and segmented goat foot tools made of Toolox 33
• Quality Made in Europe

FSM 3060 PRO on NC-juhtimisega täppispinnalihvmasin, mis sobib tasapinna-, süvis- ja ristlihvimiseks. Tugev pingevabastatud malmkorpus, NSK P4 klassi spindlilaagrid ning automaatsed servoajamitega teljed tagavad suure täpsuse ja töökindluse ka raskemate töödetailide töötlemisel.

Tehnilised andmed:

• Magnetlaua mõõtmed: 600 × 300 mm
• Maksimaalne detaili kaal: 300 kg
• Maksimaalne kaugus spindli ja laua vahel: 500 mm
• X-telje käik: 700 mm
• Z-telje käik: 340 mm
• X-telje etteandekiirus: 5–25 m/min
• Spindli jooksutäpsus: 0,002 mm
• Spindli mootori võimsus: 3,75 kW
• Hüdraulikapumba võimsus: 0,75 kW
• Spindli pöörlemiskiirus: 1450 p/min
• Kiiruse reguleerimine: astmeteta (inverterjuhtimine)
• Lihvketta mõõtmed: Ø 355 × 38 × 127 mm
• Koguvõimsus: 7,6 kW
• Toitepinge: 400 V / 50 Hz
• Juhtsüsteem: 10" puutetundlik NC-juhtimine G1 (Y- ja Z-telg)
• Masina mõõtmed (P × L × K): 3000 × 2500 × 2460 mm
• Kaal: 2500 kg

Tehnilised andmed:

• Lõikevõime 0° ümartäismaterjal: Ø 440 mm.
• Lõikevõime 0° ristkülikprofiil: 460 × 400 mm.
• Pakilõikuse võimekus 0°: 460 × 400 mm.
• Saelindi kiirus: 15–150 m/min, sujuvalt reguleeritav.
• Saelindi mõõdud: 5360 × 34 × 1,1 mm.
• Saelindi kaldenurk: 7°.
• Minimaalne lõikepikkus: 10 mm.
• Minimaalne materjali läbimõõt: 10 mm.
• Minimaalne jääkdetaili pikkus: 30 mm.
• Töölaua kõrgus: 800 mm.
• Ajamimootori võimsus: 4,0 kW.
• Hüdraulikapumba võimsus: 0,75 kW.
• Jahutuspumba võimsus: 0,12 kW.
• Toitepinge: 400 V / 50 Hz.
• Mõõtmed (P × L × K): 3875 × 1950 × 2190 mm.
• Netokaal: 2410 kg.

Varustus:

• Mitsubishi FX5 juhtsüsteem 4,3" puuteekraaniga
• BRP lõikeetteande juhtimine
• Hüdrauliline saelindi pingutus
• Hüdrauliline lõikeetteanne ja tagasikäik
• Kaheosaline hüdrauliline kruustang
• Elektriline laastuhari
• Emulsioonjahutus
• LED-töövalgustus
• Pööratav juhtpult

• Foot operated
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp bending bar
• In series with manual adjustment of the bending angle
• Especially low-maintenance
• The workpiece is clamped by a motorized mechanism
• S-models with segmented upper tools
• SH-models with high, segmented casting foot tools

• Other models
• Standard tools hardened
• Hardened sharp bending bar and bending bar
• Segmented tools and hardened bending bar
• Segmented casting foot tools and bending bar hardened

• Very heavy and robust welded construction
• Dynamic drive of the bending beam by means of two frequency-controlled motors with gears
• Over cheek clamping via trapezoidal thread
• High-quality Lenze motors
• Continuous sharp bending rail
• Tools suitable for bending stainless steel
• Bending angle adjustment via touchscreen NC control system
• Sheet thickness adjustment manually at the bending beam
• Manual crowning device of the bending beam
• Operation via double foot pedal with emergency stop function
• Clean motor-driven machine without hydraulics
• SH models with segmented, high goat foot tools
• DUO models with continuous sharp-bending rail and high, segmented goat foot tools

• Foot operated
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp bending bar
• In series with manual adjustment of the bending angle
• Especially low-maintenance
• The workpiece is clamped by a motorized mechanism
• S-models with segmented upper tools
• SH-models with high, segmented casting foot tools

• Other models
• Standard tools hardened
• Hardened sharp bending bar and bending bar
• Segmented tools and hardened bending bar
• Segmented casting foot tools and bending bar hardened

• Very heavy and robust welded construction
• Dynamic drive of the bending beam by means of two frequency-controlled motors with gears
• Over cheek clamping via trapezoidal thread
• High-quality Lenze motors
• Continuous sharp bending rail
• Tools suitable for bending stainless steel
• Bending angle adjustment via touchscreen NC control system
• Sheet thickness adjustment manually at the bending beam
• Manual crowning device of the bending beam
• Operation via double foot pedal with emergency stop function
• Clean motor-driven machine without hydraulics
• SH models with segmented, high goat foot tools
• DUO models with continuous sharp-bending rail and high, segmented goat foot tools

• Sturdy and robust welded construction
• Suitable for cutting steel and non-ferrous metals
• Due to the foot control both hands remain free for the material supply
• Large dimensioned viewing window made of Plexiglas
• High-quality knife bar made of steel
• link guide
• Easy adjustment of the cutting blade via eight screws
• Angle adjustable side stop with millimeter scale
• Standard cut line lighting
• Optimum price-performance ratio

• Material roller conveyor with stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel (optionally also available with plastic rollers)
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 450 mm
• Length measuring device with handwheel adjustment
• Roller and measuring track with digital LED dimension display in mm, electrical connection 230 V, 50 Hz with power supply unit
• Measuring stop adjustable by handwheel from the workplace, with pneumatic brake for measuring fixation
• Sturdy material stop trolley, 12 ball bearings, movable on large dimensioned guide profile. The stop arm is adjustable and hinged.
• For roller conveyors with a length of more than 5 m, a cable drag chain is used
• Mounting side as desired right or left

Equipment details

position indicator

• 5-digit LED measurement display for constant, millimeter-accurate control of the current position of the stop car
• Position indicator with hollow shaft encoder mounted directly on the drive shaft
• Measuring accuracy / m: ± 0.5 mm

stop arm

• 900 mm long stop arm
• Stop plate adjustable to zero point and manually hinged backwards
• Multiple ball bearings, thus free of play
• Quality Made in Germany

• Sliding upper beam with adjustable flat guides
• Manual backgauge with 550 mm travel range
• Solid 90° side fence with 1000 mm length, T-slot, tilting cam and scale
• LED cutting line lighting and slotted holes in the top cover for an optimum view of the cutting edge for cutting on tear
• High-quality, rotatable knives suitable for cutting stainless steel Heavy-duty hold-down beam with material-friendly polyurethane inserts suitable for cutting stainless steel
• Heavy-duty hold-down bar with material-friendly polyurethane inserts
• Rear area protected by light barrier
• Operation via mobile foot pedal console with emergency stop

• For accurate cold and hot bending of flat, round and square steels
• Stable design for screwing on the workbench
• Holes in the cast bed for fixing on the workbench
• Infinitely adjustable bend stop
• With eccentric quick-release for efficient work
• Bending angle up to 120 °
• High repeat accuracy due to bending angle stop
• Ideal for repair shops and locksmiths

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 400 mm
• Precision flat steel guide attached to the back of the roller conveyor
• Sturdy, 6-way ball-bearing material stop trolley, easy-moving, manually movable and lockable
• Robust stop arm attached to the stop truck, adjustable to the tool (0 point)
• With length measuring device and digital dimensioning system
• Roller and measuring track with battery-operated LCD display and magnetic tape measuring system
• Quality Made in Germany

Please specify when ordering mounting side and height!

Working height up to 1020 mm possible with optional foot plates.

By request:

• Working height from 1020 mm can be extended from the factory
• Also with 500 mm web width

• Semi-motor version - manual operation of the upper cheek, bending process motorised
• Designed for professional use
• With foot operation
• heavy, compact weldment
• With continuous sharp bending rail
• Standard with manual adjustment of the bending angle by means of nonius ring
• Particularly low-maintenance
• S-models with segmented top tools
• SH models with high, segmented goat foot tools
• Hardening of standard tools available on request: sharp bending rail and bending strip hardened, segmented tools and bending strip hardened, segmented goat foot tools and bending strip hardened
• Further swivel bending machines available on request

• For use in the metalworking industry for grinding, structuring and polishing tasks, especially in the stainless steel sector
• 225 mm balanced belt rollers ensure optimum and low-vibration drive
• Infinitely variable belt speed of 4.5 - 27 m/s thanks to frequency shaper
• With electric table height adjustment
• With split table that can be opened, drawer sanding unit and integrated work table lighting
• Smooth-running sanding table even under load
• Easy adjustment of the sanding belt
• Profile roller sanding pad, resulting in less tarnishing during the sanding process
• Right-left rotation as standard