METALLKRAFT

• P version with two pneumatic auxiliary cylinders and foot switch
• Sturdy and robust welded construction
• Suitable for cutting steel and non-ferrous metals
• Foot operation leaves both hands free for material feed
• Large viewing window made of Plexiglas
• High-quality steel blade
• Baffle guide
• Simple adjustment of the cutting blade via eight screws
• Angle-adjustable side stop with millimeter scale
• Maximum distance from finger guard to work table is 5 mm, ensuring maximum safety
• Cutting line lighting as standard

• With foot control
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp-bending rail
• Seriesßig with manual adjustment of the bending angle
• Especially low-maintenance
• Clamping of the workpiece is motor-driven
• SH models with high, segmented cast base tools
• DUO models with continuous sharp-bending rail and high, segmented goat foot tools

• Standard tools hardened
• Sharp bending bar and bending bar hardened
• Segmented tools and bending bar hardened
• Segmented cast foot tools and bending bar hardened

• Powerful and quiet drive via LENZE gear motors with brake
• Compact, heavy and stress-free welded steel construction
• Sharp bending rail made of tool steel C50 at the clamping cheek
• Continuous, exchangeable bed support made of tool steel C50
• Continuous bending rail made of tool steel C50 at the bending beam
• Automatic pressure regulation of the clamping cheek via motor current pick-up
• Drive of the clamping cheek via generously dimensioned trapezoidal thread spindles
• Bending angle adjustment PT 1 via potentiometer on the machine front (right)
• Manual fine adjustment of bending beam with scale
• Manual crowning via pressure screws in the bending beam
• Foot remote control with emergency stop function
• All moving parts with low-maintenance bearings
• Electrical components from Schneider or Omron
• SH-models with high, segmented goat's foot tools
• Quality Made in Europe
• Available on request: Models in DUO design with continuous sharp bending rail and segmented goad foot tools, standard tools hardened, sharp bending rail and bending bar hardened, segmented tools and bending bar hardened, segmented goad foot tools and bending bar hardened

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 260 mm
• With length measuring device
• Roller and measuring track with mm-scale, manual measuring system with C-guide profile and sliding flap stop
• Quality Made in Germany

• Material roller conveyor with stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel (optionally also available with plastic rollers)
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 450 mm
• Length measuring device with handwheel adjustment
• Roller and measuring track with digital LED dimension display in mm, electrical connection 230 V, 50 Hz with power supply unit
• Measuring stop adjustable by handwheel from the workplace, with pneumatic brake for measuring fixation
• Sturdy material stop trolley, 12 ball bearings, movable on large dimensioned guide profile. The stop arm is adjustable and hinged.
• For roller conveyors with a length of more than 5 m, a cable drag chain is used
• Mounting side as desired right or left

Equipment details

position indicator

• 5-digit LED measurement display for constant, millimeter-accurate control of the current position of the stop car
• Position indicator with hollow shaft encoder mounted directly on the drive shaft
• Measuring accuracy / m: ± 0.5 mm

stop arm

• 900 mm long stop arm
• Stop plate adjustable to zero point and manually hinged backwards
• Multiple ball bearings, thus free of play
• Quality Made in Germany

• Heavy and stable welded construction
• Punching table with scale and stops
• Extra large projection with 625 mm
• Time-saving, stepless stroke adjustment
• With a powerful engine
• Stepless adjustment of the stroke
• Punching saddle with second holder for machining UPN profiles
• Stamps and dies no. 1, no. 2, no. 3, no. 30, no. 45, no. 60 can be used with the standard delivery scope of the machine. Use of punch and die no. 4 and no. 80 optional

• Please specify when ordering material to be edited!

• Powerful saw blade feed
• Saw blade feed with ARP system
• Carbide program

• Saw blade feed rate up to 150 m/min
• Saw blade feed with ARP system for automatic feed adjustment
• Carbide program for the use of carbide saw bands
• Material feed and saw frame driven by recirculating ball screws
• Material library with preset sawing parameters and characteristic curves
• Operation on modern and powerful Siemens HMI multi-touch panel
• Hydraulic band tensioning
• Motorized saw brush
• Cutting course control
• Hydraulic saw band guide
• Coolant tank removable to the front
• Chip conveyor
• Movable, linear saw band guide
• LED workplace lighting
• Double guided saw band tensioning
• Support arm with counter support bearing for smoother cut
• Flushing of the cutting channel

• For all repair and assembly work, e.g.: alignment of axles, beams, shafts, etc .; pressing and pressing bearings, bolts and bushings; pressing and squeezing work; load tests and welding sample tests; and much more
• Stable welded construction
• Robust frame with perforation for the adjustment of the press table
• Reliable, very precise hydraulic from European production
• With chrome-plated cylinder pistons
• Pressing pressure readable via manometer
• With automatic return of the piston with safety valve to protect against overload
• For processing flat material, pressing in bearings, bolts and the like, it is essential to use the optional perforated plates
• Quality made in Europe

• Robust machine design
• Manual and automatic mode selectable
• Easy tool change through quick change adapter

• Durable construction of tools and tool guides made of high-quality, hardened steel
• Manual operation via two foot pedals for flow and return
• Automatic mode by programming the front and rear travel end points
• Easy to change the die by quick change recording
• Foot pedal with digital display and emergency stop switch

Hydraulic oil not included

• Heavy and stable cast iron construction
• Self-braking engine
• Foot pedal operation
• Adjustable lower shaft
• Steel shafts
• 8 set of standard rolls
• With subframe
• Powerful 400 volt engine
• Adjustable stop plate

Please specify processed material by order!

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• Feed / discharge roller conveyor
• Roller conveyor without scale and stop with side guide
• Quality Made in Germany

• Foot operated
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp bending bar
• In series with manual adjustment of the bending angle
• Especially low-maintenance
• The workpiece is clamped by a motorized mechanism
• S-models with segmented upper tools
• SH-models with high, segmented casting foot tools

• Other models
• Standard tools hardened
• Hardened sharp bending bar and bending bar
• Segmented tools and hardened bending bar
• Segmented casting foot tools and bending bar hardened

• Miter adjustment from -45° to +60° user-friendly adjustment from the front for better handling, especially with attached roller conveyor
• Robust band guides with adjustable carbide plates for a precise cut
• Saw blade guides with integrated cooling system
• Electromechanical monitoring of the saw blade tension via microswitch
• With chip clearing brush for optimum cleaning and maintenance of the saw blade
• Saw arm inclined by 25°, thus extending the service life of the saw blade
• The saw blade stops automatically at the end of the cutting process
• Hydraulically controlled lowering pressure of the saw arm
• Turntable with pivoting cutting gap prevents cutting into the saw table
• Ergonomic operating concept
• Vice with quick clamping device

• Automatic workpiece clamping after the start of the cutting cycle
• Execution of the saw cut at the selected belt speed
• Automatic stop of the lowering movement and the saw blade in the lower end position
• Automatic return of the saw arm to its upper end position
• Vice opens automatically
• Operator only has to move the material

• For sawing hollow profiles and solid materials made of steel, stainless steel, tool steel, non-ferrous metals and plastic
• Saw blade drive with low-maintenance, oil-lubricated worm gearbox
• With robust three-phase motor with overload protection
• Saw blade guide with adjustable carbide plates for a precise cut
• With mechanical saw blade tensioning and monitoring via microswitch
• Saw blade guides with integrated cooling system
• With frequency converter as standard for infinitely variable adjustment of the saw blade speed from 20 - 100 m/min
• With BRP saw blade monitoring as standard
• Chip clearing brush for optimum cleaning and maintenance of the saw blade
• Digital angle display
• Swivel control panel

• Suitable for cutting steel and non-ferrous metals
• Sheet support arms for large workpieces
• Cutting line lighting and slotted holes in the upper cover plate for an optimum view of the cutting edge for cutting on a tear
• Manual backgauge 630 mm with millimeter-precise adjustment option

• Suitable for cutting steel and non-ferrous metals
• Heavy, stress-free welded steel construction
• High quality knife
• Sheet metal support arms for large workpieces
• Cut line illumination and long holes in the upper cover plate for an optimal view of the cutting edge for cutting on scratches
• Manual back gauge 630 mm with millimeter precision adjustment
• Photocell for the backgauge area
• The foot control leaves both hands free for the material supply

• For sawing hollow profiles and solid materials made of steel, stainless steel, tool steel, non-ferrous metals and plastic
• Saw blade guide with adjustable carbide plates for a precise cut
• Hydraulically controlled system for both vices and the up and down movement of the saw arm
• Precise material feed via recirculating ball screw
• Frequency converter as standard for infinitely variable adjustment of the saw blade speed from 20 - 100 m/min
• BRP - saw blade monitoring
• The jaws of the two clamping vices are equipped with long-stroke hydraulic cylinders as standard, eliminating the need to preset them to the material cross-section to be sawn
• Digital angle display
• Swivel control panel
• Mechanical band clamping device
• Automatic band guide adjustment
• Chip clearing brush for optimum cleaning and maintenance of the saw blade
• Saw band guides with integrated cooling system

• For use in the metalworking industry for grinding, structuring and polishing tasks, especially in the stainless steel sector
• 225 mm balanced belt rollers ensure optimum and low-vibration drive
• Infinitely variable belt speed of 4.5 - 27 m/s thanks to frequency shaper
• With electric table height adjustment
• With split table that can be opened, drawer sanding unit and integrated work table lighting
• Smooth-running sanding table even under load
• Easy adjustment of the sanding belt
• Profile roller sanding pad, resulting in less tarnishing during the sanding process
• Right-left rotation as standard

Tehnilised andmed:

• Maksimaalne töölaius: 1520 mm
• Maksimaalne painutusvõime terasel (235 N/mm²): 1,5 mm
• Maksimaalne painutusvõime terasel (700 N/mm²): 0,9 mm
• Maksimaalne painutusvõime alumiiniumil: 1,8 mm
• Maksimaalne painutusnurk: 135°
• Maksimaalne ava ülemise ja alumise tala vahel: 25 mm
• Segmentatsioon: 25 / 30 / 35 / 40 / 45 / 50 / 75 / 100 / 150 / 200 / 250 / 250 / 270 mm
• Mõõtmed (P × L × K): 1850 × 770 × 1130 mm
• Netokaal: 415 kg
• Brutokaal: 480 kg
• Jalapedaaliga juhitav tooriku kinnitus
• Võimas painutamist hõlbustav abisilinder
• Isemäärduvad liuglaagrid
• Reguleeritav painutusnurga piiraja
• Materjali paksuse reguleerimine rihvelkruviga
• Ülemise tala survejõud reguleeritav käsikruvidega

MBS 125 Special Offer Set on kompaktne metalli lintsaag terase, alumiiniumi, vase ja plastmaterjalide lõikamiseks. Astmeteta kiiruse reguleerimine, kuni 60° nurklõiked ja suur lõiketäpsus muudavad selle ideaalseks töökoja- ja paigaldussaeks.

Tehnilised andmed:

• Toitepinge: 230 V
• Mootori võimsus: 1,01 kW
• Mootori tüüp: madalapöördeline alalisvoolumootor süsiharjadega
• Saelindi mõõtmed: 1440 × 13 × 0,65 mm
• Saelindi kiirus: 30-80 m/min
• Elektrooniline astmeteta kiiruse reguleerimine
• Lõikenurk: 0° kuni +60°
• Lõiketäpsus: 0,3 mm / 100 mm
• Lõikevõime 90° ümartoru: 125 mm
• Lõikevõime 90° ümarmaterjal: 87,5 mm
• Lõikevõime 90° ristkülikprofiil: 125 × 120 mm
• Lõikevõime 90° ristkülikprofiil (püstasend): 120 × 125 mm
• Lõikevõime 45° ümartoru: 80 mm
• Lõikevõime 45° ümarmaterjal: 56 mm
• Lõikevõime 45° ristkülikprofiil: 70 × 110 mm
• Lõikevõime 60° ümartoru: 45 mm
• Lõikevõime 60° ümarmaterjal: 31,5 mm
• Lõikevõime 60° ristkülikprofiil: 40 × 70 mm
• Sobib terase, alumiiniumi, vase, PVC ja tefloni lõikamiseks
• Võimalik kasutada kuiv- ja märglõikuseks
• Tugev survevalualumiiniumist saeraam
• Karastatud ja lihvitud tigukäiguga reduktor
• Elektrooniline ülekoormuskaitse
• Reguleeritavad saelindi juhikud metallist laastukraapijatega
• Mõõdud: 350 × 700 × 660 mm
• Netokaal: 23 kg
• Brutokaal: 23,5 kg

Komplekti sisu:

• Metallkraft MBS 125 lintsaag
• Bimetall-saelint
• Materjali kinnituskruustang
• Transportlukustusega saeraam
• Eripakkumise komplekti kuuluvad lisatarvikud
• Kasutusjuhend

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 400 mm
• Precision flat steel guide attached to the rear of the roller conveyor
• Sturdy, 6-way ball-bearing material stop trolley, easy-moving, manually movable and lockable
• Stopper with reading magnifying glass facilitates reading on the mm scale
• Robust stop arm attached to the stop truck, adjustable to the tool (0 point)
• Quality Made in Germany

Working height up to 1020 mm possible with optional foot plates.

By request:

• Working height from 1020 mm can be extended from the factory
• Also with 500 mm web width