METALLKRAFT

Metallkraft HSBM 3160‑0.7 on käsitsi juhitav professionaalne painutuspink, mis sobib täpsete ja sirgete plekipainutuste tegemiseks katuse‑ ja plekitöödel, montaažitöödel ning üldises metallitöökojas. Masin on kerge, mobiilne ja vastupidava konstruktsiooniga.

Põhiomadused:

• Maksimaalne töölaius: 3000–3160 mm (sõltuvalt allikast)
• Painutusvõime:
  
  

- Teras (400 N/mm²): kuni 0,7–0,8 mm

- Roostevaba teras: kuni 0,65 mm

- Alumiinium: kuni 1,5 mm

• Mõõdud: u. 3550 × 660 × 1000 mm
• Kaal: ligikaudu 415 kg
• Konstruktsioon: tugev ja lihtne raam, mis tagab täpse töö
• Painutamine: kaarsangaga (bow‑handle) pööratav painutusliikumine
• Kinnitamine: tooriku kindel ja turvaline fikseerimine hoova abil
• Liikuvus: varustatud transpordiratastega ja parkimispiduriga
• Kasutusvaldkonnad: katuseplekid, äravooluplekid, neeluplekid, korstnamantlid jm profiilplekid

RBM 305 on kompaktne käsitsi juhitav 3-rulliga valtspink, mis sobib torude, silindrite ja teiste ümarate detailide valmistamiseks õhukesest lehtmetallist. Tänu tugevale konstruktsioonile, terasrullidele ja käigukastiga käsiajamile tagab seade täpse ning sujuva töö nii töökojas kui ka piiratud ruumiga paigaldusobjektidel. 

Asümmeetriline rullide paigutus võimaldab mugavat eelvaltsimist ning kallutatav külgrull lihtsustab kooniliste detailide valmistamist. Väljaulatuv ülemine rull võimaldab valmis detaili kiiresti eemaldada. Lisaks on külg- ja surverull varustatud traadisoontega, mis võimaldavad töödelda erineva läbimõõduga traate. 

Omadused:

• 3-rulliga käsitsi juhitav valtspink
• Tugevad terasrullid
• Asümmeetriline rullide paigutus lihtsaks eelvaltsimiseks
• Kallutatav külgrull kooniliste detailide valmistamiseks
• Väljatõmmatav ülemine rull valmis detaili hõlpsaks eemaldamiseks
• Käsivänt ja reduktoriga jõuülekanne
• Traadisooned läbimõõtudele 4 / 6 / 8 mm
• Kompaktne ja kerge konstruktsioon
• Sobib torude, silindrite ja muude ümarvormide valmistamiseks 

Tehnilised andmed:

• Maksimaalne töölaius: 305 mm
• Maksimaalne eelvaltsimise võime terases (400 N/mm²): 0,8 mm
• Minimaalne painutusdiameeter: 40 mm
• Ülemise rulli läbimõõt: 25 mm
• Traadisooned: 4 / 6 / 8 mm
• Mõõtmed (P × L × K): 580 × 210 × 255 mm
• Kaal: ca 14 kg

HSBM 305 HS on kompaktne ja vastupidav käsitsi juhitav painutuspink, mis sobib ideaalselt plekitöödeks töökodades, hooldusettevõtetes ning hobikasutajatele. Lihtne konstruktsioon koos tugevast terasest raamiga tagab täpse töö ja pika kasutusea. Segmenteeritud ülemine tala võimaldab valmistada keerukamaid profiile, karpe ja servapainutusi.

Tänu ekstsentrikmehhanismiga kiirele seadistusele ning kuni 135° painutusnurgale on masinat mugav kasutada erinevate lehtmetallitööde tegemisel. Kompaktsed mõõtmed ja suhteliselt väike kaal muudavad seadme hõlpsasti teisaldatavaks.

Omadused:

• Tugev ja töökindel käsitsi juhitav painutuspink
• Segmenteeritud ülemine tala keerukamate profiilide valmistamiseks
• Kiire ja kasutajasõbralik reguleerimine ekstsentrikmehhanismi abil
• Sobib kastide, profiilide ja servapainutuste tegemiseks
• Maksimaalne painutusnurk 135°
• Kvaliteetne Euroopa tootmine
• Lihtne transportida ja paigaldada

Tehnilised andmed:

• Maksimaalne töölaius: 305 mm
• Painutusvõime (400 N/mm²): 1,0 mm
• Maksimaalne painutusnurk: 135°
• Segmentide jaotus: 25 / 50 / 50 / 75 / 100 mm
• Mõõtmed (P × L × K): 500 × 350 × 410 mm
• Kaal: ca 30 kg

Kvaliteetne 6-osaline kinnitusmandrite komplekt WPP 15 sobib erinevate läbimõõtudega detailide kinnitamiseks ja töötlemiseks. Komplekt sisaldab perforeeritud plaati, mis võimaldab mandreid mugavalt hoiustada ja töökoha korrastatuna hoida.

Kvaliteetne 6-osaline mandrite komplekt WPP 20 sobib erinevate läbimõõtudega töödeks ning sisaldab perforeeritud plaati mugavaks hoiustamiseks ja organiseerimiseks. Komplekti kuuluvad kuus erineva mõõduga mandrit, mis võimaldavad paindlikku kasutust vastavalt töö vajadustele.

Komplekti kuulub:

• Perforeeritud plaat
• Mandrid läbimõõduga:
  
  

    Ø 29 mm

    Ø 24 mm

    Ø 18 mm

    Ø 14 mm

    Ø 10 mm

    Ø 5 mm

• Very good adhesion
• Tool life is increased
• speeds up the work process - improves chip flow
• can be used for drilling, cutting, broaching, etc.
• for steel, stainless steel, non-ferrous metal, etc.
• for machine and manual processing

• Including chuck key

• Chip remover for removing magnetic metal chips
• For cleaning e.g. inner surfaces of core drills and collecting small magnetic parts
• Can be extended by 114 mm
• Diameter of the magnet 16 mm

• Two-column guided horizontal saw for sawing solid bars and bar profiles
• Siemens S7-1500 control system with wide range of functions and operation via large 7" touch display
• With 2000 mm material transporter as standard -> frequency-controlled feed via circulating spindle and servomotor
• Material library with preset sawing parameters and characteristic curves
• Cutting movement via rotating spindle and servo motor
• With ARP (automatic cutting feed control) -> Automatic saw blade feed depending on the material resistance. Feed speed is constantly adapted to the current cutting load. ARP enables shorter work processes and a longer service life for the saw bands.
• Automatic positioning after entering the desired angle
• Hydraulic clamping of the turntable enables precise angular cutting
• Robust machine body and the smallest possible distances between the saw blade, machine guide and workpiece minimize vibrations for maximum sawing performance
• Infinitely variable cutting speed from 15 - 150 m/min
• Saw blade drive via bevel gearbox, asynchronous motor and frequency inverter
• For straight cuts, the material is clamped in front of and behind the cut using a two-part vice
• Pressure adjustment of the hydraulic vice clamping via control valve with pressure gauge
• Saw blade inclination of 7° and hydraulic saw blade tension increase the service life of the saw blade
• Front band guide moves automatically parallel to the movable vice jaw
• chip clearing brush driven via belt roller
• Emulsion cooling with liquid distribution into the saw blade guides and directly into the cutting channel
• Safety light barrier from LEUZE in front of the machine and the material transporter
• More powerful motor optionally available
• Saw blade guides with integrated cooling system

• Release up to three different pipe diameters (MRA 2)
• Can be used both horizontally and vertically
• Low effort

• Heavy, robust welded construction
• Splitter-guided upper beam with adjustable flat guides
• Manual cutting gap adjustment at the front of the machine
• LED cutting line illumination and elongated holes in the top cover for an optimal view of the cutting edge and for cutting on tear-off
• Solid 90° side stop with 1000 mm length, T-slot, tilting cam and scale
• Two solid sheet support arms with T-slots and tilting cams
• Motorized, NC-controlled backgauge with 750 mm travel range
• Backgauge drive with frequency converter, motor with brake and recirculating ball screws
• High-quality, rotatable knives suitable for cutting stainless steel
• Heavy hold-down beam with gentle rubber inserts
• Rear area protected by light curtain
• Operation via mobile foot pedal console with emergency stop

• for round bending of square material
• stable construction, fixable to the ground
• Drive the two lower rollers by means of a hand crank
• Rolls hardened and ground
• Steel shafts, hardened and ground
• Delivery via upper roller

• motor design
• horizontal and vertical work possibility
• powerful 400Volt engine
• Left / right rotation by foot pedal

• Suitable for dry grinding machines
• Separation of coarse particles in a prechamber
• Filter material made of fine cellulose
• Quick and easy filter change
• Chip container with chassis for easy emptying

• Suitable for dry grinding machines
• Separation of coarse particles in a prechamber
• Filter material made of fine cellulose
• Quick and easy filter change
• Adjustment of the automatic filter cleaning via controls
• Chip container with chassis for easy emptying

• Simple operation
• Heavy, compact welded construction
• Particularly low maintenance
• For easy bending with precise adjustment of the bending angle using a stop with scale
• Sheet thickness adjustable via bending beam
• Tools for VA on request: sharp bending rail and bending bar made of Toolox 33, segmented tools and bending bar made of Toolox 33 and segmented goat foot tools made of Toolox 33
• Quality Made in Europe

• NC control for setting the bending angle and the correction
• counter for high repeatability
• Mobile control panel with controls and pedals
• Fast tool change

• Powerful motor with inverter and reduction gear produces high torque
• NC control for setting the bending angle and the correction
• counter for high repeatability
• Mobile control panel with controls and pedals
• Fast tool change
• All shafts hardened and ground
• Material clamping is done manually
• Very good price / performance ratio

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Device for pneumatic folding away of the material arm to the rear
• Pneumatic cylinder handles this task simply and conveniently from the central operator console via a rotary switch

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 400 mm
• Precision flat steel guide attached to the back of the roller conveyor
• Sturdy, 6-way ball-bearing material stop trolley, easy-moving, manually movable and lockable
• Robust stop arm attached to the stop truck, adjustable to the tool (0 point)
• With length measuring device and digital dimensioning system
• Roller and measuring track with battery-operated LCD display and magnetic tape measuring system
• Quality Made in Germany

Please specify when ordering mounting side and height!

Working height up to 1020 mm possible with optional foot plates.

By request:

• Working height from 1020 mm can be extended from the factory
• Also with 500 mm web width

• For deburring flat components e.g. after laser cutting or punching
• Large working width with up to 1350 mm
• Conveyor table with profile conveyor belt for optimum hold during processing

• For deburring flat components e.g. after laser cutting or punching
• Large working width with up to 1350 mm
• Conveyor table with profile foconveyor belt for optimum hold during processing
• NC control with 8" touch screen