Sivuleikkurit

Knipex 70 06 180 Diagonal Cutter (VDE) is a professional insulated side cutter for electrical and mechanical work.

Features:

• Length: 180 mm
• Cutting edge hardness: approx. 62 HRC (induction-hardened)
• Material: Vanadium electric steel, forged and multi-stage oil-hardened
• Head finish: Chrome-plated
• Handles: Multi-component grips, VDE-tested, insulated up to 1000 V
• Dimensions: 180 × 56 × 20 mm
• Weight: 254 g
• Standards: DIN ISO 5749, DIN EN 60900, IEC 60900
• REACH compliant: SVHC-free
• RoHS compliant: Not applicable

Cutting capacities:

Soft wire (e.g. copper): up to Ø 4.0 mm

Medium hard wire: up to Ø 3.0 mm

Hard wire (e.g. steel): up to Ø 2.5 mm

Slim head design allows use in confined spaces. Clean cutting even of fine copper wires at the tips of the cutting edges.

Precision pliers for ultra-fine cutting work, ideal for electronics and fine mechanics.

Key Features:

Cutting edges: Ground, extremely sharp, without bevel – designed for flush cutting.

Precision tips: Shaped to cut wires close to surfaces, even as thin as Ø 0.2 mm.

Cutting type: Shear cut with controlled micro cutting edge misalignment for precise cuts and long tool life.

Material: Surgical-grade INOX stainless steel.

Hardness: Cutting edge hardness approx. 54 HRC.

Joint: Stainless steel rivet for durability.

Handles: Multi-component grips for comfort and control.

Spring mechanism: Includes opening spring and limiter for ease of repetitive work.

Movement: Extremely smooth for minimal operator fatigue.

Technical Specifications:

• Length: 125 mm
• Weight: 56 g
• Dimensions: 125 x 65 x 13 mm
• Jaw length (B): 9 mm
• Jaw thickness (D): 7.5 mm
• Head width (A): 13.5 mm

Cutting capacity:

Soft wire: Ø up to 1.6 mm

Medium-hard wire: Ø up to 1.0 mm

Compliance:

Standard: DIN ISO 9654

REACH: Compliant (no SVHC)

RoHS: Not applicable

This tool is especially appreciated by professionals such as electronics engineers, mechatronics technicians, and industrial electricians for its precision, durability, and ergonomic design.

Precision pliers for ultra-fine cutting work, ideal for electronics and fine mechanics.

Key Features:

Cutting edges: Ground, extremely sharp, without bevel – designed for flush cutting.

Precision tips: Shaped to cut wires close to surfaces, even as thin as Ø 0.2 mm.

Cutting type: Shear cut with controlled micro cutting edge misalignment for precise cuts and long tool life.

Material: Special tool steel, burnished.

Hardness: Cutting edge hardness approx. 60 HRC (induction-hardened).

Joint: Stainless steel rivet for durability.

Handles: Multi-component grips for comfort and control.

Spring mechanism: Includes opening spring and limiter for ease of repetitive work.

Movement: Extremely smooth for minimal operator fatigue.

Head design: Narrow head for working in tight spaces, such as densely packed circuit boards.

Technical Specifications:

• Length: 125 mm
• Weight: 55 g
• Dimensions: 125 x 60 x 13 mm
• Jaw length (B): 9 mm
• Jaw thickness (D): 7.5 mm
• Head width (A): 12.5 mm

Cutting capacity:
Soft wire: Ø 0.2 – 1.0 mm

Compliance:

Standard: DIN ISO 9654

REACH: Compliant (no SVHC)

RoHS: Not applicable

This model is especially valued by professionals in electronics, mechatronics, and precision engineering for its accuracy, ergonomic design, and long-lasting performance.

Precision diagonal cutting pliers designed for ultra-fine cutting work in electronics and fine mechanics, with ESD-safe handles for electrostatic discharge protection.

Key Features:

Cutting edges: Ground, extremely sharp, without bevel – for flush cutting.

Cutting type: Shear cut with controlled micro cutting edge misalignment for precise cuts and long service life.

Material: Special tool steel, burnished; induction-hardened cutting edges (approx. 62 HRC).

Handles: Multi-component grips, electrically dissipative (ESD) – safely discharge static electricity.

Joint: Stainless steel rivet for durability and smooth movement.

Spring mechanism: Includes opening spring and limiter for repetitive work.

Movement: Extremely smooth for minimal operator fatigue.

Precision tips: Cut wires close to surfaces, even as thin as Ø 0.2 mm.

Suitable for: Cutting soft wires, medium-hard wires, and even fiber optic cables.

Technical Specifications:

Length: 125 mm

Weight: 56 g

Dimensions: 125 × 70 × 13 mm

Jaw length (B): 9 mm

Jaw thickness (D): 7.5 mm

Head width (A): 13.5 mm

Cutting capacity:

Soft wire: Ø 0.2 – 1.6 mm

Medium-hard wire: Ø up to 1.2 mm

Compliance:

Standards: DIN ISO 9654, DIN EN 61 340-5

REACH: Compliant (no SVHC)

RoHS: Not applicable

This tool is ideal for professionals working with sensitive electronic components, offering precision, safety, and comfort

Precision side cutter for ultra-fine cutting work, ideal for electronics and fine mechanics, with ESD-safe handles.

Key Features:

15 mm longer version for greater stability and cutting performance

Precision-ground cutting edges without bevel for flush cutting

Shear cut with micro cutting edge misalignment for long service life

INOX surgical steel, rustproof and durable

Cutting edge hardness approx. 54 HRC

Precision tips cut wires from Ø 0.2 mm close to surfaces

Opening spring and limiter for ergonomic, fatigue-free work

Extremely smooth movement thanks to stainless steel rivet joint

Multi-component grips, ESD-safe

Technical Specifications:

Length: 140 mm

Weight: 77 g

Jaw length (B): 12.3 mm

Jaw thickness (D): 9.2 mm

Head width (A): 15.7 mm

Standards: DIN ISO 9654, DIN EN 61340-5

REACH: Compliant (no SVHC)

RoHS: Not applicable

Cutting capacity:

Soft wire: Ø 0.2 – 2.1 mm

Medium-hard wire: Ø up to 1.2 mm

Precision side cutter for ultra-fine cutting work in electronics and fine mechanics, with ESD-safe handles for electrostatic discharge protection.

Key Features:

Extra-long version (140 mm) for greater stability and cutting performance

Precision-ground cutting edges without bevel for flush cutting

Shear cut with micro cutting edge misalignment for long service life

Special tool steel, burnished and oil-hardened in multiple stages

Cutting edge hardness approx. 64 HRC (induction-hardened)

Precisely shaped tips cut wires close to surfaces from Ø 0.2 mm

Opening spring and limiter for ergonomic, fatigue-free work

Smooth movement thanks to stainless steel rivet joint

Multi-component grips, ESD-safe (DIN EN 61340-5 compliant)

Technical Specifications:

Length: 140 mm

Weight: 85 g

Jaw length (B): 12.3 mm

Jaw thickness (D): 9.2 mm

Head width (A): 15.7 mm

Standards: DIN ISO 9654, DIN EN 61340-5

REACH: Compliant (no SVHC)

RoHS: Not applicable

Cutting capacity:

Soft wire: Ø 0.2 – 2.1 mm

Medium-hard wire: Ø up to 1.4 mm

VDE-tested precision pliers for ultra-fine cutting work in electronics and fine mechanics, designed for safe use on live parts up to 1000 V.

Key Features:

Cutting edges: Ground, extremely sharp, without bevel – for flush cutting

Cutting type: Shear cut with controlled micro cutting edge misalignment for precise cuts and long service life

Material: INOX tool steel, polished

Cutting edge hardness: Approx. 54 HRC

Joint: Stainless steel rivet for smooth movement and durability

Handles: Insulated with multi-component grips, VDE-tested

Spring mechanism: Includes opening spring and limiter for ergonomic, fatigue-free work

Precision tips: Cut wires close to surfaces from Ø 0.2 mm

Technical Specifications:

Length: 125 mm

Weight: 60 g

Dimensions: 125 × 78 × 18 mm

Jaw length (B): 9 mm

Jaw thickness (D): 7.5 mm

Head width (A): 13.5 mm

Cutting capacity:

Soft wire: Ø 0.2 – 1.6 mm

Medium-hard wire: Ø up to 1.0 mm

Compliance:

Standards: DIN ISO 9654, DIN EN 60900, IEC 60900

REACH: Compliant (no SVHC)

RoHS: Not applicable

This tool is ideal for professionals working in electrical engineering and electronics, offering precision, safety, and comfort for demanding tasks.

Täpsed ja võimsad külglõikurid, mis sobivad erinevate materjalide lõikamiseks – alates pehmest kuni eriti kõvani. Tööriist on varustatud BiCut® funktsiooniga, mis võimaldab kahekordset lõikejõudu nupuvajutusega.

Peamised omadused:

BiCut® tehnoloogia: võimaldab lülituda tavalise ja suure jõudlusega lõikerežiimi vahel

DynamicJoint® liigend: optimeerib käsijõu ülekande lõikamisel

Materjal: sepistatud C70 tööriistateras, induktiivselt karastatud lõikeservad (kõvadus kuni 64 HRC)

Ergonoomilised kahekomponentsed käepidemed: mugav ja väsimusvaba töö.

Lõikevõime:

Keskmise kõvadusega traat: kuni Ø 3,5 mm

Vedruteras: kuni Ø 3 mm

Kõvad materjalid: naelad, kruvid, poltid, vedrutraadid, ketid jne

Tehnilised andmed:

Pikkus: 200 mm

Kaal: ca 386 g

Standardid: DIN ISO 5749

Pakend: blisterpakend

EAN: 4010995389826

Kasutusvaldkond:

Sobib elektri-, ehitus- ja tööstustöödeks, kus on vaja lõigata erinevaid materjale – ka väga kõvasid. Tänu kahekordsele lõikejõule on töö lihtsam, kiirem ja vähem koormav randmetele.

Universaalsed lõiketangid, mis sobivad nii pehme kui ka kõva traadi lõikamiseks. Tööriist on loodud professionaalseks kasutamiseks tööstuslikes tingimustes.

Peamised omadused:

DynamicJoint® liigendsüsteem tagab optimaalse käsijõu ülekande lõikeservadele – kuni 40% suurem lõikejõud

Poolringikujuline pea võimaldab puhta lõikeserva

Ergonoomiline käepide tagab mugava ja väsimusvaba töö

Induktiivselt karastatud lõikeservad (kõvadus kuni 64 HRC)

Materjal: kvaliteetne C70 tööriistateras

Pikk tööiga tänu vastupidavale konstruktsioonile

Tehnilised andmed:

Pikkus: 140 mm

Kaal: ca 185 g

Mõõdud: 100 × 31 × 100 mm (P × L × K)

Standard: DIN ISO 5749

Kasutusvaldkond:

Sobib kaablite, pehme ja kõva traadi lõikamiseks

Ideaalne elektrikutele, mehaanikutele ja tööstustehnikutele

Soovitus: tööriista pikaealisuse tagamiseks soovitatakse pärast kasutamist regulaarselt määrida.

Universaalsed lõiketangid, mis sobivad nii pehme kui ka kõva traadi lõikamiseks. Tööriist on loodud professionaalseks kasutamiseks tööstuslikes tingimustes.

Peamised omadused:

DynamicJoint® liigendsüsteem tagab optimaalse käsijõu ülekande lõikeservadele – kuni 40% suurem lõikejõud

Poolringikujuline pea võimaldab puhta lõikeserva

Ergonoomiline kahekomponentne käepide tagab mugava ja väsimusvaba töö

Induktiivselt karastatud lõikeservad (kõvadus kuni 64 HRC)

Materjal: kvaliteetne C70 tööriistateras

Pikk tööiga tänu vastupidavale konstruktsioonile

Tehnilised andmed:

Pikkus: 180 mm

Lõikevõime: pehme ja kõva traat kuni Ø 2.3 mm

Kaal: ca 287 g

Pakend: blisterpakend

Standard: DIN ISO 5749

Kasutusvaldkond:

Sobib kaablite, pehme ja kõva traadi lõikamiseks

Ideaalne elektrikutele, mehaanikutele ja tööstustehnikutele

Soovitus: tööriista pikaealisuse tagamiseks soovitatakse pärast kasutamist regulaarselt määrida.

Kõrgekvaliteedilised kaablikäärid, mis on mõeldud vase- ja alumiiniumkaablite lõikamiseks ilma purustamiseta. Sobivad tööks pingestatud osade läheduses kuni 1 000 V AC.

Peamised omadused:

Puhas lõige – ei purusta ega deformeeri kaablit

Lülitatav avamispump – vähendab käe väsimust pikaajalisel kasutamisel

Ergonoomilised mitmekomponentsed käepidemed – mugav ja kindel haare

Kroomitud pind – kaitseb rooste eest ja pikendab tööriista eluiga

Induktiivselt karastatud lõikeservad (u. 64 HRC)

Materjal: kvaliteetne C70 tööriistateras

VDE ja GS testitud, vastab IEC 60900 standardile

Individuaalselt testitud 10 000 V AC juures, heaks kiidetud kuni 1 000 V AC töödeks

Tehnilised andmed:

Pikkus: 210 mm (8 ¼")

Maksimaalne kaabli ristlõige: kuni 60 mm²

Kaal: ca 330 g

Ei sobi: terastraatide või kõvasti tõmmatud vaskjuhtmete jaoks

A complete 3-piece cutting tool set designed for professional electrical work, combining precision, versatility, and ergonomic efficiency.

Set Contents:

Knipex Electronic Super Knips® – 78 06 125 VDE

• Precision cutting pliers for ultra-fine wires
• Shear cut with controlled micro cutting edge misalignment
• Ideal for delicate electronics work
• VDE-tested for electrical safety

Knipex Diagonal Cutter – 70 06 160 VDE

• Robust cutter for soft and hard wires up to Ø 2 mm
• Clean cuts even at the tips
• Made from vanadium electric steel, forged and multi-stage oil-hardened
• VDE-tested

Knipex StepCut® Cable Shears – 95 16 160 VDE

• Power-saving cable shears with stepped cutting edges
• Cuts wires sequentially for up to 40% easier cutting compared to standard shears
• Suitable for cables up to Ø 15 mm / 50 mm²
• VDE-tested

General Features:

High-quality materials and multi-stage oil hardening

VDE-tested handle sleeves for safe electrical work

Perfectly complementary tools for a wide range of cutting tasks

REACH compliant (no SVHC)

RoHS: Not applicable

Weight: Approx. 510–596 g (set)

Dimensions: Approx. 166 × 30 mm