Sivuleikkurit

Knipex 70 06 140 Diagonal Cutter (VDE) is a versatile insulated side cutter designed for electrical and electronic work.

Features:

• Length: 140 mm
• Cutting edge hardness: approx. 62 HRC (induction-hardened)
• Material: Vanadium electric steel, forged and oil-hardened
• Finish: Chrome-plated head
• Handles: Multi-component grips, VDE-tested, insulated up to 1000 V
• Standards: DIN ISO 5749, DIN EN 60900, IEC 60900
• REACH & RoHS compliance: SVHC-free, RoHS not applicable
• Use case: Ideal for confined workspaces due to slim head design

Cutting capacity:

• Soft wire (e.g. copper): up to Ø 4.0 mm
• Medium hard wire: up to Ø 2.5 mm
• Hard wire (e.g. steel): up to Ø 1.8 mm

Provides clean cuts even for very fine copper wires, right at the cutting edge tips.

Knipex 70 06 160 Diagonal Cutter (VDE) is a professional insulated side cutter designed for electrical and mechanical work.

Features:

• Length: 160 mm
• Cutting edge hardness: approx. 62 HRC (induction-hardened)
• Material: Vanadium electric steel, forged and multi-stage oil-hardened
• Head finish: Chrome-plated
• Handles: Multi-component grips, VDE-tested, insulated up to 1000 V
• Dimensions: 160 x 55 x 20 mm
• Weight: 216 g
• Standards: DIN ISO 5749, DIN EN 60900, IEC 60900
• REACH compliant: SVHC-free
• RoHS compliant: Not applicable

Cutting capacities:

Soft wire: up to Ø 4.0 mm

Medium hard wire: up to Ø 3.0 mm

Hard wire: up to Ø 2.0 mm

Slim head design allows use in confined spaces. Provides clean cuts even for thin copper wires, including at the tips of the cutting edges.

Knipex 70 06 180 Diagonal Cutter (VDE) is a professional insulated side cutter for electrical and mechanical work.

Features:

• Length: 180 mm
• Cutting edge hardness: approx. 62 HRC (induction-hardened)
• Material: Vanadium electric steel, forged and multi-stage oil-hardened
• Head finish: Chrome-plated
• Handles: Multi-component grips, VDE-tested, insulated up to 1000 V
• Dimensions: 180 × 56 × 20 mm
• Weight: 254 g
• Standards: DIN ISO 5749, DIN EN 60900, IEC 60900
• REACH compliant: SVHC-free
• RoHS compliant: Not applicable

Cutting capacities:

Soft wire (e.g. copper): up to Ø 4.0 mm

Medium hard wire: up to Ø 3.0 mm

Hard wire (e.g. steel): up to Ø 2.5 mm

Slim head design allows use in confined spaces. Clean cutting even of fine copper wires at the tips of the cutting edges.

• Tool Type: Diagonal Cutter
• Length: 110 mm
• Weight: 98 g
• Material: Vanadium electric steel, forged, multi-stage oil-hardened
• Head Finish: Chrome-plated
• Handles: Multi-component ergonomic grips
• Cutting Edge Hardness: Approx. 62 HRC
  
  
  

Cutting Capacities:

• Soft wire: up to Ø 3.0 mm
• Medium-hard wire: up to Ø 2.0 mm
• Hard wire: up to Ø 1.2 mm

Features:

• Compact size – ideal for confined spaces
• Precision cutting edges for soft and hard wire
• Clean cutting of thin copper wires, even at the tips
• Induction-hardened cutting edges for long service life
• Opening spring for easier handling
• Chrome plating for corrosion resistance and easy cleaning

• Application: Special cutter for concrete mesh and structural steel, including steel lying flat.
• Material: Cutter head made of chrome vanadium heavy-duty steel, forged and multi-stage oil-hardened; joint made of special tool steel, forged.
• Cutting edges: Induction-hardened, cutting edge hardness approx. 62 HRC.
• Features:

    Very flat head and joint area for good accessibility.

    Recessed cutting edges for secure material grip.

    High cutting performance with minimum effort due to optimum     coordination of cutting edge angle and transmission ratio.

    Precise adjustment (12 positions) by eccentric bolt.

    Bolted cutter head, replaceable.

    Forged-in stopper with elastomer shock absorber.

• Handles: Steel tube, powder-coated, sturdy non-slip two-color multi-component grips; ergonomically angled.
• Finish: Grey atramentized.
• Dimensions: Length 950 mm, width 180 mm, height 40 mm.
• Weight: approx. 4.11 kg.
• Cutting capacities:

        
HRC 19: Ø 11 mm

HRC 40: Ø 9 mm

HRC 48: Ø 6 mm

• Cutting edge length: 44 mm.

• Application: Designed for cutting molded plastic components from sprues and other soft materials such as lead; ideal for injection molding finishing.
• Cutting edge: Fully flush (no bevel) for smooth, clean cuts with minimal post-processing.
• Material: Vanadium electric steel, forged and oil-hardened.
• Features: Opening spring for user comfort during repetitive tasks.
• Handles: Plastic-coated, non-slip.
• Finish: Polished head.
• Dimensions: Length 140 mm, width 47 mm, height 13 mm.
• Weight: approx. 120–125 g.
• Advantages:

    Compact and stable design.

    Perfect for flush cutting sprues directly on molded parts.

    Surface-ground cutting edges for precise, smooth cuts.

• Application: Designed for cutting molded plastic components from sprues and other soft materials such as lead; ideal for injection molding finishing.
• Cutting edge: Fully flush (no bevel) for smooth, clean cuts with minimal post-processing.
• Material: Vanadium electric steel, forged and oil-hardened.
• Features:

    Opening spring for user comfort during repetitive tasks.

    Improved transmission ratio for 25% more cutting performance.

• Handles: Plastic-coated, non-slip.
• Finish: Polished head.
• Dimensions: Length 160 mm, width 50 mm, height 15 mm.
• Weight: approx. 164 g.
• Advantages:

    Compact and stable design.

    Perfect for flush cutting sprues directly on molded parts.

    Surface-ground cutting edges for precise, smooth cuts

• Application: Designed for cutting molded plastic components from sprues and other soft materials such as lead; ideal for injection molding finishing.
• Cutting edge: Fully flush (no bevel) for smooth, clean cuts with minimal post-processing.
• Material: Vanadium electric steel, forged and oil-hardened.
• Features: Opening spring for user comfort during repetitive tasks.
• Handles: Plastic-coated, non-slip.
• Finish: Polished head.
• Dimensions: Length 180 mm, width 49 mm, height 14 mm.
• Weight: approx. 193 g.
• Advantages:

    Compact and stable design.

    Perfect for flush cutting sprues directly on molded parts.

    Surface-ground cutting edges for precise, smooth cuts.

• Application: Designed for cutting molded plastic components from sprues and other soft materials such as lead; ideal for injection molding finishing.
• Cutting edge: Fully flush (no bevel) for smooth, clean cuts with minimal post-processing.
• Special feature: Cutting edges angled at 45° for easy access in hard-to-reach areas.
• Material: Vanadium electric steel, forged and oil-hardened.
• Handles: Plastic-coated, non-slip.
• Additional feature: Opening spring for user comfort during repetitive tasks.
• Finish: Polished head.
• Dimensions: Length 160 mm, width 75 mm, height 15 mm.
• Weight: approx. 156 g.
• Advantages:

    Compact and stable design.

    Perfect for flush cutting sprues directly on molded parts.

    Surface-ground cutting edges for precise, smooth cuts.

• Application: Cuts fine strands, multi-core cables, and piano wire; also suitable for nails and spring steel wire.
• Material: Chrome vanadium heavy-duty steel, forged, multi-stage oil-hardened.
• Cutting edges: Induction-hardened, cutting edge hardness approx. 64 HRC.
• Features:

    High leverage design – requires up to 40% less effort compared to     standard diagonal cutters.

    Compact and lightweight (only 175 g), length 160 mm.

    Large opening width for thicker cables.

    Box-joint design with double-supported joint axle for maximum     stability.

• Handles: Multi-component grips, ergonomic.
• Finish: Black atramentized, polished head.
• Dimensions: 160 × 60 × 21 mm.
• Weight: approx. 175 g.
• Cutting capacities:

    Soft wire: Ø 4.8 mm

    Medium hard wire: Ø 3.8 mm

    Hard wire: Ø 2.7 mm

    Piano wire: Ø 2.2 mm

    Copper cable, multi-stranded: Ø up to 12 mm.

• High leverage compact diagonal cutter
• Cuts fine strands, multi-core cables, and piano wire
• Powerful, lightweight, and universal
• Requires 40% less force compared to standard diagonal cutters
• Chrome vanadium heavy-duty steel, forged, multi-stage oil-hardened
• Handles: VDE-tested, multi-component insulation
• Length: 160 mm
• Weight: ~175 g
• Standards: DIN ISO 5749, IEC 60900
• Cutting capacities:

    Soft wire: Ø 4.8 mm

    Medium-hard wire: Ø 3.8 mm

    Hard wire: Ø 2.7 mm

    Piano wire: Ø 2.2 mm

    Copper cable, multi-stranded: Ø 12 mm

• Insulation: 1000 V (VDE)

• Compact diagonal cutter for very tough, continuous use
• High cutting performance with minimum effort thanks to optimized cutting edge angle and leverage ratio
• Precision cutting edges, induction-hardened (approx. 64 HRC), suitable for all wire types including piano wire
• Material: Chrome vanadium heavy-duty steel, forged, multi-stage oil-hardened
• Length: 140 mm
• Weight: approx. 131 g
• Standard: DIN ISO 5749
• Cutting capacities:

    Medium-hard wire: Ø 3.1 mm

    Hard wire: Ø 2.0 mm

    Piano wire: Ø 1.5 mm

    Handles: plastic-coated, ergonomic design

• Advantages: 20% less effort compared to standard diagonal cutters, ideal for constant use

• Compact diagonal cutter for very tough, continuous use
• High cutting performance with minimum effort thanks to optimized cutting edge angle and leverage ratio
• Precision cutting edges, induction-hardened (approx. 64 HRC), suitable for all wire types including piano wire
• Material: Chrome vanadium heavy-duty steel, forged, multi-stage oil-hardened
• Length: 160 mm
• Weight: approx. 178 g
• Standard: DIN ISO 5749
• Cutting capacities:

    Medium-hard wire: Ø 3.4 mm

    Hard wire: Ø 2.5 mm

    Piano wire: Ø 2.0 mm

• Handles: plastic-coated, ergonomic design
• Advantages: 20% less effort compared to standard diagonal cutters, ideal for constant use

• Compact diagonal cutter for very tough, continuous use
• High cutting performance with minimum effort thanks to optimized cutting edge angle and leverage ratio
• Precision cutting edges, induction-hardened (approx. 64 HRC), suitable for all wire types including piano wire
• Material: Chrome vanadium heavy-duty steel, forged, multi-stage oil-hardened
• Length: 180 mm
• Weight: approx. 241 g
• Standard: DIN ISO 5749
• Cutting capacities:

    Medium-hard wire: Ø 3.8 mm

    Hard wire: Ø 2.7 mm

    Piano wire: Ø 2.2 mm

• Handles: plastic-coated, ergonomic design
• Advantages: 20% less effort compared to standard diagonal cutters, ideal for constant use

• Diagonal cutter for very tough, continuous use
• High cutting performance with minimum effort thanks to optimized cutting edge angle and leverage ratio
• Precision cutting edges, induction-hardened (approx. 64 HRC), suitable for all wire types including piano wire
• Material: Chrome vanadium heavy-duty steel, forged, multi-stage oil-hardened
• Length: 200 mm
• Weight: approx. 263 g
• Standard: DIN ISO 5749
• Cutting capacities:

    Medium-hard wire: Ø 4.2 mm

    Hard wire: Ø 3.0 mm

    Piano wire: Ø 2.5 mm

• Handles: plastic-coated, ergonomic design
• Advantages: 20% less effort compared to standard diagonal cutters, ideal for constant use

• Large diagonal cutter for very tough, continuous use
• High cutting performance with minimum effort thanks to optimized cutting edge angle and leverage ratio
• Precision cutting edges, induction-hardened (approx. 64 HRC), suitable for all wire types including piano wire
• Material: Chrome vanadium heavy-duty steel, forged, multi-stage oil-hardened
• Length: 250 mm
• Weight: approx. 391 g
• Standard: DIN ISO 5749
• Cutting capacities:

    Medium-hard wire: Ø 4.6 mm

    Hard wire: Ø 3.5 mm

    Piano wire: Ø 3.0 mm

• Handles: plastic-coated, ergonomic design
• Advantages: 20% less effort compared to standard diagonal cutters, ideal for constant use

• For very tough, continuous use
• High cutting performance with minimum effort thanks to optimized cutting edge angle and leverage ratio
• Precision cutting edges, induction-hardened (approx. 64 HRC), suitable for all wire types including piano wire
• Material: Chrome vanadium heavy-duty steel, forged, multi-stage oil-hardened
• Length: 160 mm
• Weight: approx. 209 g
• Standard: DIN ISO 5749
• Cutting capacities:

    Medium-hard wire: Ø 3.4 mm

    Hard wire: Ø 2.5 mm

    Piano wire: Ø 2.0 mm

• Handles: multi-component grips, ergonomic design
• Advantages: 20% less effort compared to standard diagonal cutters, ideal for constant use

• For very tough, continuous use
• High cutting performance with minimum effort thanks to optimized cutting edge angle and leverage ratio
• Precision cutting edges, induction-hardened (approx. 64 HRC), suitable for all wire types including piano wire
• Material: Chrome vanadium heavy-duty steel, forged, multi-stage oil-hardened
• Length: 180 mm
• Weight: approx. 250 g
• Standard: DIN ISO 5749
• Cutting capacities:

    Medium-hard wire: Ø 3.8 mm

    Hard wire: Ø 2.7 mm

    Piano wire: Ø 2.2 mm

• Handles: multi-component grips, ergonomic design
• Advantages: 20% less effort compared to standard diagonal cutters, ideal for constant use

• Diagonal cutter for very tough, continuous use
• High cutting performance with minimum effort thanks to optimized cutting edge angle and leverage ratio
• Precision cutting edges, induction-hardened (approx. 64 HRC), suitable for all wire types including piano wire
• Material: Chrome vanadium heavy-duty steel, forged, multi-stage oil-hardened
• Length: 200 mm
• Weight: approx. 280 g
• Standard: DIN ISO 5749
• Cutting capacities:

    Medium-hard wire: Ø 4.2 mm

    Hard wire: Ø 3.0 mm

    Piano wire: Ø 2.5 mm

• Handles: multi-component grips, ergonomic design
• Advantages: 20% less effort compared to standard diagonal cutters, ideal for constant use

• Large diagonal cutter for very tough, continuous use
• High cutting performance with minimum effort thanks to optimized cutting edge angle and leverage ratio
• Precision cutting edges, induction-hardened (approx. 64 HRC), suitable for all wire types including piano wire
• Material: Chrome vanadium heavy-duty steel, forged, multi-stage oil-hardened
• Length: 250 mm
• Weight: approx. 437 g
• Standard: DIN ISO 5749
• Cutting capacities:

    Medium-hard wire: Ø 4.6 mm

    Hard wire: Ø 3.5 mm

    Piano wire: Ø 3.0 mm

• Handles: multi-component grips, ergonomic design
• Advantages: 20% less effort compared to standard diagonal cutters, ideal for constant use