Sivuleikkurit

• Diagonal cutter for very tough, continuous use
• VDE-tested insulation up to 1000 V according to IEC 60900
• High cutting performance with minimum effort thanks to optimized cutting edge angle and leverage ratio
• Precision cutting edges, induction-hardened (approx. 64 HRC), suitable for all wire types including piano wire
• Material: Chrome vanadium heavy-duty steel, forged, multi-stage oil-hardened
• Length: 180 mm
• Weight: approx. 250 g
• Standards: DIN ISO 5749, IEC 60900
• Cutting capacities:

    Medium-hard wire: Ø 3.8 mm

    Hard wire: Ø 2.7 mm

    Piano wire: Ø 2.2 mm

• Handles: multi-component VDE insulation, ergonomic design
• Advantages: 20% less effort compared to standard diagonal cutters, ideal for electrical work

• Diagonal cutter for very tough, continuous use
• VDE-tested insulation up to 1000 V according to IEC 60900
• High cutting performance with minimum effort thanks to optimized cutting edge angle and leverage ratio
• Precision cutting edges, induction-hardened (approx. 64 HRC), suitable for all wire types including piano wire
• Material: Chrome vanadium heavy-duty steel, forged, multi-stage oil-hardened
• Length: 200 mm
• Weight: approx. 280 g
• Standards: DIN ISO 5749, IEC 60900
• Cutting capacities:

    Medium-hard wire: Ø 4.2 mm

    Hard wire: Ø 3.0 mm

    Piano wire: Ø 2.5 mm

• Handles: multi-component VDE insulation, ergonomic design
• Advantages: 20% less effort compared to standard diagonal cutters, ideal for electrical work

• Diagonal cutter for very tough, continuous use
• VDE-tested insulation up to 1000 V according to IEC 60900
• High cutting performance with minimum effort thanks to optimized cutting edge angle and leverage ratio
• Precision cutting edges, induction-hardened (approx. 64 HRC), suitable for all wire types including piano wire
• Material: Chrome vanadium heavy-duty steel, forged, multi-stage oil-hardened
• Length: 200 mm
• Weight: approx. 280 g
• Standards: DIN ISO 5749, IEC 60900
• Cutting capacities:

    Medium-hard wire: Ø 4.2 mm

    Hard wire: Ø 3.0 mm

    Piano wire: Ø 2.5 mm

• Handles: multi-component VDE insulation, ergonomic design
• Advantages: 20% less effort compared to standard diagonal cutters, ideal for electrical work

• Large diagonal cutter for very tough, continuous use
• VDE-tested insulation up to 1000 V according to IEC 60900
• High cutting performance with minimum effort thanks to optimized cutting edge angle and leverage ratio
• Precision cutting edges, induction-hardened (approx. 64 HRC), suitable for all wire types including piano wire
• Material: Chrome vanadium heavy-duty steel, forged, multi-stage oil-hardened
• Length: 250 mm
• Weight: approx. 437 g
• Standards: DIN ISO 5749, IEC 60900
• Cutting capacities:

    Medium-hard wire: Ø 4.6 mm

    Hard wire: Ø 3.5 mm

    Piano wire: Ø 3.0 mm

• Handles: multi-component VDE insulation, ergonomic design
• Advantages: 20% less effort compared to standard diagonal cutters, ideal for electrical work

• Diagonal cutter for very tough, continuous use
• VDE-tested insulation up to 1000 V according to IEC 60900
• High cutting performance with minimum effort thanks to optimized cutting edge angle and leverage ratio
• Precision cutting edges, induction-hardened (approx. 64 HRC), suitable for all wire types including piano wire
• Material: Chrome vanadium heavy-duty steel, forged, multi-stage oil-hardened
• Length: 200 mm
• Weight: approx. 280 g
• Standards: DIN ISO 5749, IEC 60900
• Cutting capacities:

    Medium-hard wire: Ø 4.2 mm

    Hard wire: Ø 3.0 mm

    Piano wire: Ø 2.5 mm

• Handles: multi-component VDE insulation, ergonomic design
• Advantages: 20% less effort compared to standard diagonal cutters, ideal for electrical work

• Large diagonal cutter for very tough, continuous use
• VDE-tested insulation up to 1000 V according to IEC 60900
• High cutting performance with minimum effort thanks to optimized cutting edge angle and leverage ratio
• Precision cutting edges, induction-hardened (approx. 64 HRC), suitable for all wire types including piano wire
• Material: Chrome vanadium heavy-duty steel, forged, multi-stage oil-hardened
• Length: 250 mm
• Weight: approx. 437 g
• Standards: DIN ISO 5749, IEC 60900
• Cutting capacities:

    Medium-hard wire: Ø 4.6 mm

    Hard wire: Ø 3.5 mm

    Piano wire: Ø 3.0 mm

• Handles: multi-component VDE insulation, ergonomic design
• Advantages: 20% less effort compared to standard diagonal cutters, ideal for electrical work

• Length: 125 mm
• Weight: 112 g
• Material: Vanadium electric steel, forged, multi-stage oil-hardened
• Handles: Multi-component comfort grips
• Cutting Edges: Sharp, precisely aligned, induction-hardened (approx. 63 HRC)
• Joint Type: Lap joint
• Finish: Black atramentized, polished head
• Standard: DIN ISO 5749

Cutting Capacity:

• Soft wire: Ø 0.4 – 3 mm
• Medium-hard wire: Ø 2.3 mm
• Hard wire: Ø 1.5 mm
• Piano wire: Ø 0.6 mm

• Very precise diagonal cutter for electronics and fine work
• Cutting edges induction-hardened, suitable for fine wires and components
• Material: Chrome vanadium electric steel, forged, multi-stage oil-hardened
• Length: 115 mm
• Weight: approx. 80 g
• Cutting capacities:

    Soft wire: Ø 1.6 mm

    Medium-hard wire: Ø 1.0 mm

• Handles: multi-component grips, ergonomic design
• Advantages: Extremely precise cut, ideal for electronics and delicate work

• Tool Type: Electronics Diagonal Cutter
• Length: 116 mm
• Weight: 70 g
• Material: Special tool steel, forged, oil-hardened
• Head Finish: Mirror polished
• Handles: Multi-component ergonomic grips
• Cutting Edge Hardness: Approx. 57 HRC

Cutting Capacities:

Soft wire: up to Ø 1.3 mm

Medium-hard wire: up to Ø 0.8 mm

Features:

• Precision tool for fine cutting in electronics and precision mechanics
• Pointed head without bevel – ideal for confined spaces
• Sturdy, zero-backlash box joint for durability
• Low-friction double spring for smooth and even opening
• Mirror polish with oil film for rust protection
• Not suitable for cutting hard wire

Precision pliers for ultra-fine cutting work, ideal for electronics and fine mechanics.

Key Features:

Cutting edges: Ground, extremely sharp, without bevel – designed for flush cutting.

Precision tips: Shaped to cut wires close to surfaces, even as thin as Ø 0.2 mm.

Cutting type: Shear cut with controlled micro cutting edge misalignment for precise cuts and long tool life.

Material: Surgical-grade INOX stainless steel.

Hardness: Cutting edge hardness approx. 54 HRC.

Joint: Stainless steel rivet for durability.

Handles: Multi-component grips for comfort and control.

Spring mechanism: Includes opening spring and limiter for ease of repetitive work.

Movement: Extremely smooth for minimal operator fatigue.

Technical Specifications:

• Length: 125 mm
• Weight: 56 g
• Dimensions: 125 x 65 x 13 mm
• Jaw length (B): 9 mm
• Jaw thickness (D): 7.5 mm
• Head width (A): 13.5 mm

Cutting capacity:

Soft wire: Ø up to 1.6 mm

Medium-hard wire: Ø up to 1.0 mm

Compliance:

Standard: DIN ISO 9654

REACH: Compliant (no SVHC)

RoHS: Not applicable

This tool is especially appreciated by professionals such as electronics engineers, mechatronics technicians, and industrial electricians for its precision, durability, and ergonomic design.

Description:

Precision pliers designed for ultra-fine cutting tasks in electronics and fine mechanics. The ESD version features handles that safely discharge electrostatic energy, protecting sensitive electronic components.

Key Features:

Cutting edges: Ground, very sharp, without bevel – ideal for flush cutting

Cutting edge hardness: Approx. 54 HRC

Material: INOX stainless steel (surgical grade)

Cutting type: Shear cut with controlled micro cutting edge misalignment for precision and durability

Joint: Stainless steel rivet for smooth operation

Handles: Multi-component ESD-safe grips

Opening spring and limiter: For ergonomic use and reduced fatigue

Precision tips: Allow cutting wires as thin as Ø 0.2 mm close to surfaces

Cutting Capacities:

Soft wire: Ø 0.2 – 1.6 mm

Medium hard wire: Ø 1.0 mm

Dimensions:

Length: 125 mm

Jaw length (B): 9 mm

Jaw thickness (D): 7.5 mm

Head width (A): 13.5 mm

Weight: 56 g

Compliance:

Standard: DIN ISO 9654

REACH: Compliant (no SVHC)

RoHS: Not applicable

• Very precise diagonal cutter for electronics and fine work
• Cutting edges induction-hardened, suitable for fine wires and components
• Material: Chrome vanadium electric steel, forged, multi-stage oil-hardened
• Length: 140 mm
• Weight: approx. 100 g
• Cutting capacities:

    Soft wire: Ø 1.6 mm

    Medium-hard wire: Ø 1.0 mm

• Handles: multi-component grips, ergonomic design
• Advantages: Extremely precise cut, ideal for electronics and delicate work

Precision side cutter for ultra-fine cutting work, ideal for electronics and fine mechanics, with ESD-safe handles.

Key Features:

15 mm longer version for greater stability and cutting performance

Precision-ground cutting edges without bevel for flush cutting

Shear cut with micro cutting edge misalignment for long service life

INOX surgical steel, rustproof and durable

Cutting edge hardness approx. 54 HRC

Precision tips cut wires from Ø 0.2 mm close to surfaces

Opening spring and limiter for ergonomic, fatigue-free work

Extremely smooth movement thanks to stainless steel rivet joint

Multi-component grips, ESD-safe

Technical Specifications:

Length: 140 mm

Weight: 77 g

Jaw length (B): 12.3 mm

Jaw thickness (D): 9.2 mm

Head width (A): 15.7 mm

Standards: DIN ISO 9654, DIN EN 61340-5

REACH: Compliant (no SVHC)

RoHS: Not applicable

Cutting capacity:

Soft wire: Ø 0.2 – 2.1 mm

Medium-hard wire: Ø up to 1.2 mm

VDE-tested precision pliers for ultra-fine cutting work in electronics and fine mechanics, designed for safe use on live parts up to 1000 V.

Key Features:

Cutting edges: Ground, extremely sharp, without bevel – for flush cutting

Cutting type: Shear cut with controlled micro cutting edge misalignment for precise cuts and long service life

Material: INOX tool steel, polished

Cutting edge hardness: Approx. 54 HRC

Joint: Stainless steel rivet for smooth movement and durability

Handles: Insulated with multi-component grips, VDE-tested

Spring mechanism: Includes opening spring and limiter for ergonomic, fatigue-free work

Precision tips: Cut wires close to surfaces from Ø 0.2 mm

Technical Specifications:

Length: 125 mm

Weight: 60 g

Dimensions: 125 × 78 × 18 mm

Jaw length (B): 9 mm

Jaw thickness (D): 7.5 mm

Head width (A): 13.5 mm

Cutting capacity:

Soft wire: Ø 0.2 – 1.6 mm

Medium-hard wire: Ø up to 1.0 mm

Compliance:

Standards: DIN ISO 9654, DIN EN 60900, IEC 60900

REACH: Compliant (no SVHC)

RoHS: Not applicable

This tool is ideal for professionals working in electrical engineering and electronics, offering precision, safety, and comfort for demanding tasks.

Features:

• Very sharp cutting edges without bevel – for flush cuts
• Cutting capacity: soft wire up to Ø 1.6 mm, medium hard wire up to Ø 1.0 mm
• Cutting edge hardness: approx. 54 HRC
• Made of INOX tool steel (surgical stainless steel)
• Opening spring and limiter – smooth operation
• Lead catcher – prevents uncontrolled loss of wire ends
• Weight: 57 g
• Dimensions: 125 x 48 x 12 mm
• Complies with DIN ISO 9654
• REACH compliant (does not contain SVHC)

• Product Type: Precision side cutters for ultra-fine cutting work
• Manufacturer Code: 78 13 125 ESD
• Length: 125 mm
• Weight: 57 g
• Material: INOX tool steel (surgical stainless steel)
• Handles: Multi-component grips, electrically dissipative (ESD protection)
• Cutting Edge Hardness: Approx. 54 HRC
• Standards: DIN ISO 9654, DIN EN 61340-5
• REACH compliant: Does not contain SVHC
• RoHS compliant: Not applicable

Features:

ESD protection: Conductive handles discharge electrostatic energy slowly and safely, protecting sensitive electronic components.

Lead catcher: Prevents uncontrolled loss of cut wire ends.

Precision cutting: Ground, very sharp cutting edges without bevel for flush cuts.

Micro cutting edge misalignment: Ensures precise shear cuts and long service life.

Tip design: Precisely shaped tips allow cutting wires close to surfaces from Ø 0.2 mm.

Smooth operation: Stainless steel rivet joint and opening spring reduce operator fatigue.

Opening limiter: Prevents overextension and improves control.

Cutting Capacities:

Soft wire: Ø 0.2 – 1.6 mm

Medium-hard wire: Ø 1.0 mm

Jaw length (B): 9 mm

Jaw thickness (D): 7.5 mm

Head width (A): 13.5 mm

Precision pliers for ultra-fine cutting work, ideal for electronics and fine mechanics.

Key Features:

Cutting edges: Ground, extremely sharp, without bevel – designed for flush cutting.

Precision tips: Shaped to cut wires close to surfaces, even as thin as Ø 0.2 mm.

Cutting type: Shear cut with controlled micro cutting edge misalignment for precise cuts and long tool life.

Material: Special tool steel, burnished.

Hardness: Cutting edge hardness approx. 60 HRC (induction-hardened).

Joint: Stainless steel rivet for durability.

Handles: Multi-component grips for comfort and control.

Spring mechanism: Includes opening spring and limiter for ease of repetitive work.

Movement: Extremely smooth for minimal operator fatigue.

Head design: Narrow head for working in tight spaces, such as densely packed circuit boards.

Technical Specifications:

• Length: 125 mm
• Weight: 55 g
• Dimensions: 125 x 60 x 13 mm
• Jaw length (B): 9 mm
• Jaw thickness (D): 7.5 mm
• Head width (A): 12.5 mm

Cutting capacity:
Soft wire: Ø 0.2 – 1.0 mm

Compliance:

Standard: DIN ISO 9654

REACH: Compliant (no SVHC)

RoHS: Not applicable

This model is especially valued by professionals in electronics, mechatronics, and precision engineering for its accuracy, ergonomic design, and long-lasting performance.

• Very precise diagonal cutter for electronics and fine work
• VDE-tested insulation up to 1000 V according to IEC 60900
• Cutting edges induction-hardened, suitable for fine wires and components
• Material: Chrome vanadium electric steel, forged, multi-stage oil-hardened
• Length: 125 mm
• Weight: approx. 85 g
• Cutting capacities:

    Soft wire: Ø 1.6 mm

    Medium-hard wire: Ø 1.0 mm

• Handles: multi-component VDE insulation, ergonomic design
• Advantages: Extremely precise cut, ideal for electronics and electrical work

Precision diagonal cutting pliers designed for ultra-fine cutting work in electronics and fine mechanics, with ESD-safe handles for electrostatic discharge protection.

Key Features:

Cutting edges: Ground, extremely sharp, without bevel – for flush cutting.

Cutting type: Shear cut with controlled micro cutting edge misalignment for precise cuts and long service life.

Material: Special tool steel, burnished; induction-hardened cutting edges (approx. 62 HRC).

Handles: Multi-component grips, electrically dissipative (ESD) – safely discharge static electricity.

Joint: Stainless steel rivet for durability and smooth movement.

Spring mechanism: Includes opening spring and limiter for repetitive work.

Movement: Extremely smooth for minimal operator fatigue.

Precision tips: Cut wires close to surfaces, even as thin as Ø 0.2 mm.

Suitable for: Cutting soft wires, medium-hard wires, and even fiber optic cables.

Technical Specifications:

Length: 125 mm

Weight: 56 g

Dimensions: 125 × 70 × 13 mm

Jaw length (B): 9 mm

Jaw thickness (D): 7.5 mm

Head width (A): 13.5 mm

Cutting capacity:

Soft wire: Ø 0.2 – 1.6 mm

Medium-hard wire: Ø up to 1.2 mm

Compliance:

Standards: DIN ISO 9654, DIN EN 61 340-5

REACH: Compliant (no SVHC)

RoHS: Not applicable

This tool is ideal for professionals working with sensitive electronic components, offering precision, safety, and comfort

Precision side cutter for ultra-fine cutting work in electronics and fine mechanics, with ESD-safe handles for electrostatic discharge protection.

Key Features:

Extra-long version (140 mm) for greater stability and cutting performance

Precision-ground cutting edges without bevel for flush cutting

Shear cut with micro cutting edge misalignment for long service life

Special tool steel, burnished and oil-hardened in multiple stages

Cutting edge hardness approx. 64 HRC (induction-hardened)

Precisely shaped tips cut wires close to surfaces from Ø 0.2 mm

Opening spring and limiter for ergonomic, fatigue-free work

Smooth movement thanks to stainless steel rivet joint

Multi-component grips, ESD-safe (DIN EN 61340-5 compliant)

Technical Specifications:

Length: 140 mm

Weight: 85 g

Jaw length (B): 12.3 mm

Jaw thickness (D): 9.2 mm

Head width (A): 15.7 mm

Standards: DIN ISO 9654, DIN EN 61340-5

REACH: Compliant (no SVHC)

RoHS: Not applicable

Cutting capacity:

Soft wire: Ø 0.2 – 2.1 mm

Medium-hard wire: Ø up to 1.4 mm