METALLKRAFT

• For sawing e.g. stainless steel, tool steel, profiles and solid materials
• Material feed 990 mm
• Saw band guide with adjustable HM plates
• Robust, automatically adjustable saw band guide with cooling system
• With hydraulic band tensioning
• Linear guides on both columns
• With motor driven chip clearing brush
• Operation on modern and powerful Siemens HMI multi-touch panel

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• two cutting speeds
• Rotatable machine head 45 ° to the left and 45 ° to the right
• Reduction gear running in oil bath
• Automatic membrane coolant pump with standard coolant filter
• Quick-action vise with antigraking device, swiveling 45 ° to the left and 45 ° to the right
• Vise longitudinally displaceable and thus suitable for longitudinal cuts and slits
• Movable guard ensures optimum safety when cutting
• Control handle with safety switch
• Electrical system in low voltage 24 volts, with emergency stop switch, main switch, speed selector switch and overload protection
• Quality Made in Europe

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Impressively quiet!
• Highest life
• Infinitely 30-80 m / min
• Use of coolant on all models possible

• Ideal for sawing steel, aluminum, copper, PVC and Teflon
• Stepless, electronic speed control from 30 - 80 m / min
• Particularly quiet - up to 60% quieter than comparable band saws
• Low vibration and wear thanks to special gearbox with two large gears made of hardened steel
• Guaranteed cutting accuracy of max. 0.3 mm course over 100 mm cutting length
• Each machine individually tested for precision in Italy
• Low-speed DC drive motor with carbon brushes for up to 10 times longer life
• Electronic temperature and ampere recording monitoring against overload
• Cast strip wheels with ground running surface without rubber pads, therefore suitable for dry and wet cutting
• Massive saw bar made of die-cast aluminum (readjustable from MBS 125) and with sturdy transport lock
• Two movable, adjustable saw band guides with chip scraper made of metal
• Particularly stable base plate with non-slip feet
• Very service-friendly, as components are easily accessible

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Heavy and stable welded construction
• Punching table with scale and stops
• Extra large projection with 625 mm
• Time-saving, stepless stroke adjustment
• With a powerful engine
• Stepless adjustment of the stroke
• Punching saddle with second holder for machining UPN profiles
• Stamps and dies no. 1, no. 2, no. 3, no. 30, no. 45, no. 60 can be used with the standard delivery scope of the machine. Use of punch and die no. 4 and no. 80 optional

Important information:

• Please specify when ordering material to be edited!

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 400 mm
• Precision flat steel guide attached to the rear of the roller conveyor
• Sturdy, 6-way ball-bearing material stop trolley, easy-moving, manually movable and lockable
• Stopper with reading magnifying glass facilitates reading on the mm scale
• Robust stop arm attached to the stop truck, adjustable to the tool (0 point)
• Quality Made in Germany

Please specify when ordering mounting side and height!

Working height up to 1020 mm possible with optional foot plates.

By request:

• Working height from 1020 mm can be extended from the factory
• Also with 500 mm web width

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Fast and easy filter change
• Large collection container with quick access via drawer
• Compact and stable housing
• High capacity in the interior
• Effective suction

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• For steel
• two cutting speeds
• Reduction gear, silent in oil bath running
• automatic membrane coolant pump with standard coolant filter
• movable protection device ensures optimum safety when cutting
• Control handle with safety switch
• electrical system in low voltage 24 volts, with emergency stop switch, main switch, speed selector and overload protection
• Machine head rotatable by 45 ° on both sides
• 45 ° swiveling quick-action vice on both sides
• Quick-action vise with double clamping device guarantees a precise and low-profile cut
• Quality Made in Europe

Room amenities:

• 45 ° swiveling quick-action vice on both sides

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• For the creation of clean visible edges and for weld preparation
• Stationary or mobile device to use
• Easy and quick change from stationary to mobile use with thumbscrews and removable base
• Tool-free adjustment of the chamfer depth
• Standard angle settings at 15°, 30° and 45°
• Feed is done manually
• With patented technology
• Handy and powerful device
• For processing steel, non-ferrous metals and plastics
• Functional arrangement of the handles enable safe guiding of the device in mobile operation
• Guide plate equipped with adjustable ball heads for easy movement of the workpiece
• Automatic safety shutdown in case of overheating

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Foot operated
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp bending bar
• In series with manual adjustment of the bending angle
• Especially low-maintenance
• The workpiece is clamped by a motorized mechanism
• S-models with segmented upper tools
• SH-models with high, segmented casting foot tools

Available on request

• Other models
• Standard tools hardened
• Hardened sharp bending bar and bending bar
• Segmented tools and hardened bending bar
• Segmented casting foot tools and bending bar hardened

Quality Made in Europe

Note on technical data
For bending stainless steel, optional hardening of the tools is required
Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Semi-motor version - manual operation of the upper cheek, bending process motorised
• Designed for professional use
• With foot operation
• heavy, compact weldment
• With continuous sharp bending rail
• Standard with manual adjustment of the bending angle by means of nonius ring
• Particularly low-maintenance
• S-models with segmented top tools
• SH models with high, segmented goat foot tools
• Hardening of standard tools available on request: sharp bending rail and bending strip hardened, segmented tools and bending strip hardened, segmented goat foot tools and bending strip hardened
• Further swivel bending machines available on request

Quality Made in Europe
Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Inexpensive beginner models for craftsmen
• Simple design and solid construction ensure accurate work
• Secure fixing of the workpiece via clamping device

HSBM 305 HS / 610 HS:

• Segmented upper cheek
• Ideal for the production of all profiles up to all around edged boxes
• Fast, user-friendly adjustment of the upper beam via eccentric
• Upper beam for high U-profiles
• Swivel bending over bow handle
• Easy to transport

HSBM 1020-10:

• User-friendly adjustment of the upper beam
• Swivel bend via double handle

HSBM 2200-0.7 and HSBM 3000-0.6

• Two machines in one: manual folding machine and scissors
• Ideal for roofers on assembly, z. B. for making Erkerblechen, Mehlblechen, chimney linings
• The detachable roller cutter enables precise cutting of copper and zinc sheet
• Angle display from 0 - 135 °
• Swivel bending with secure clamping of the workpiece by preloading the upper beam
• Optionally available for HSBM 2200-0.7: function for beading sheet metal
• Quality Made in Europe

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Manual backgauge with 750 mm travel range
• High-quality, rotatable blades suitable for cutting stainless steel
• Rear area protected by light curtain
• Operation via mobile foot pedal console with emergency stop

• Slider-guided top beam with adjustable flat guides
• Manual backgauge with 750 mm travel range
• LED cut line illumination and slotted holes in top cover for an optimal view of the cutting edge for cutting up Tear
• Solid 90° side stop with 1000 mm length, T-Slot, tilt cam and scale
• Two solid plate support arms with T-Slot and tilt cam
• High quality, rotatable knives, suitable for cutting stainless steel
• Heavy hold-down bar with gentle rubber inserts
• Rear area protected by light curtain
• Operation via mobile foot pedal console with emergency stop

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Foot operated
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp bending bar
• In series with manual adjustment of the bending angle
• Especially low-maintenance
• The workpiece is clamped by a motorized mechanism
• S-models with segmented upper tools
• SH-models with high, segmented casting foot tools

Available on request

• Other models
• Standard tools hardened
• Hardened sharp bending bar and bending bar
• Segmented tools and hardened bending bar
• Segmented casting foot tools and bending bar hardened

Quality Made in Europe

Note on technical data
For bending stainless steel, optional hardening of the tools is required
Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Cutting thickness up to 4mm
• Intuitive control panel and ergonomic design make handling easier
• Compact and space-saving, ideal for workshops with limited space
• User-friendly and energy-saving thanks to hydraulic drive
• Operation via foot pedal
• Waste pieces fall into a pull-out drawer
• Sliding hold-down device
• Standard blade suitable for cutting stainless steel

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 400 mm
• Precision flat steel guide attached to the rear of the roller conveyor
• Sturdy, 6-way ball-bearing material stop trolley, easy-moving, manually movable and lockable
• Stopper with reading magnifying glass facilitates reading on the mm scale
• Robust stop arm attached to the stop truck, adjustable to the tool (0 point)
• Quality Made in Germany

Please specify when ordering mounting side and height!

Working height up to 1020 mm possible with optional foot plates.

By request:

• Working height from 1020 mm can be extended from the factory
• Also with 500 mm web width

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Suitable for cutting steel and non-ferrous metals
• Heavy, stress-free welded steel construction
• High quality knife
• Sheet metal support arms for large workpieces
• Cut line illumination and long holes in the upper cover plate for an optimal view of the cutting edge for cutting on scratches
• Manual back gauge 630 mm with millimeter precision adjustment
• Photocell for the backgauge area
• The foot control leaves both hands free for the material supply

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Stable and robust construction
• Two cutting speeds as standard
• Pivoting machine head at 45 ° to the left and 90 ° to the right
• Reduction gear running in oil bath
• With membrane coolant pump with filter
• Double vice with counter vise and Antigratspannbacken guarantees a precise and burr-free cut
• Vise longitudinally displaceable and thus suitable for Längsschnitteund slitting
• Quick-action vise swivels 45 ° to the left and 45 ° to the right
• Movable guard ensures optimum safety when cutting
• Electrical system in low voltage 24 volts, with emergency stop switch, main switch, speed selector switch and overload protection
• Control handle with safety switch
• Quality Made in Europe

Functionality of semi-automatic MKS 350 H

• Activation of the engine and closing of the vice
• Lowering the saw head to cut
• Return the saw head to home position and stop the motor
• Opening the vise

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Machine head guided vertically, with dovetail guide and adjustable wedge bar
• Swivelling 45° to the left and 60° to the right, with locking at -45°, 0°, -45°, 60°
• Two cutting speeds
• Adjustable depth stop for the vertical stroke of the saw head
• Cross-movable vice with anti-burr device
• Stable and robust construction
• Easy and hassle-free operation
• Reduction gearbox quietly running in the oil bath
• Coolant pump with coolant filter
• Coolant jet distribution, for better lubrication of the saw blade
• Chip crusher for leaf cleaning
• Electrical system in low voltage 24 volts, with emergency stop switch, main switch, speed selector switch and overload protection
• Control handle with safety switch

Quality Made in Europe
Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• For use in industry and trade
• Heavy and stable cast iron construction
• Asymmetrical 3-roller system
• Upper roller swung out, thereby easy removal of the finished workpiece
• Easily adjustable upper and lower roller
• The foot control leaves both hands free for the material supply
• User-friendly
• Powerful 400 volt engine
• Optionally available: hardened rollers

Hints:

• When ordering, please specify the type of material to be processed!
• All accessories only possible ex works.

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Foot operated
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp bending bar
• In series with manual adjustment of the bending angle
• Especially low-maintenance
• The workpiece is clamped by a motorized mechanism
• S-models with segmented upper tools
• SH-models with high, segmented casting foot tools

Available on request

• Other models
• Standard tools hardened
• Hardened sharp bending bar and bending bar
• Segmented tools and hardened bending bar
• Segmented casting foot tools and bending bar hardened

Quality Made in Europe

Note on technical data
For bending stainless steel, optional hardening of the tools is required
Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de