METALLKRAFT - Hammerjack

Core drill HARD-LINE 55 Weldon Ø 75 mm

51-38720.131675

Core drill optimally suited for:

Steel < 500 N
Steel < 750 N
Steel < 900 N
Steel < 1100 N
Steel < 1400 N
Stainless steel < 900 N
Stainless steel>900 N
Alu < 10% Si
Alu>10% Si
Copper, brass, nickel, tin
Plastics GFK / CFK
cast iron
Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
graphite

Good for:

rails

Properties of the carbide-tipped HARD-LINE core drills:
Pre-Intermediate-trimmer geometry

manufactured in elaborate pre-middle trimmer geometry
Thus: vibration-free, quiet and easy cutting with maximum service life

Conical spiral

Made with conical spiral
Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

Sandvik carbide teeth

Only equipped with Sandvik carbide teeth
NOTE: Only the best carbide is good enough for Karnasch core drills

Suitable for core drills:
Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
Manufacturer
Karnasch
Straße des Friedens 10, 15848 Görsdorf, Germany
www.karnasch.de

170,14€ 188,61€

On request in weeks

Core drill HARD-LINE 55 Universal Ø 53 mm

51-38720.131653

Core drill optimally suited for:

Steel < 500 N
Steel < 750 N
Steel < 900 N
Steel < 1100 N
Steel < 1400 N
Stainless steel < 900 N
Stainless steel>900 N
Alu < 10% Si
Alu>10% Si
Copper, brass, nickel, tin
Plastics GFK / CFK
cast iron
Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
graphite

Good for:

rails

Properties of the carbide-tipped HARD-LINE core drills:
Pre-Intermediate-trimmer geometry

manufactured in elaborate pre-middle trimmer geometry
Thus: vibration-free, quiet and easy cutting with maximum service life

Conical spiral

Made with conical spiral
Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

Sandvik carbide teeth

Only equipped with Sandvik carbide teeth
NOTE: Only the best carbide is good enough for Karnasch core drills

Suitable for core drills:
Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
Manufacturer
Karnasch
Straße des Friedens 10, 15848 Görsdorf, Germany
www.karnasch.de

101,34€ 112,34€

On request in weeks

Core drill HARD-LINE 80 Weldon Ø 33 mm

51-38720.165033

Core drill optimally suited for:

Steel < 500 N
Steel < 750 N
Steel < 900 N
Steel < 1100 N
Steel < 1400 N
Stainless steel < 900 N
Stainless steel>900 N
Alu < 10% Si
Alu>10% Si
Copper, brass, nickel, tin
Plastics GFK / CFK
cast iron
Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
graphite

Good for:

rails

Properties of the carbide-tipped HARD-LINE core drills:
Pre-Intermediate-trimmer geometry

manufactured in elaborate pre-middle trimmer geometry
Thus: vibration-free, quiet and easy cutting with maximum service life

Conical spiral

Made with conical spiral
Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

Sandvik carbide teeth

Only equipped with Sandvik carbide teeth
NOTE: Only the best carbide is good enough for Karnasch core drills

Suitable for core drills:
Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
Manufacturer
Karnasch
Straße des Friedens 10, 15848 Görsdorf, Germany
www.karnasch.de

88,09€ 97,66€

On request in weeks

Core drill BLPRO55WLDM34MM

51-38720.131734

Core drill optimally suited for:

Steel < 500 N
Steel < 750 N
Steel < 900 N
Steel < 1100 N
Stainless steel < 900 N
Stainless steel>900 N
Alu < 10% Si
Alu>10% Si
Copper, brass, nickel, tin
Plastics GFK / CFK
cast iron
Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
rails

Good for:

Steel < 1400 N

Use possible with:

graphite

Characteristics of BLUE-LINE core drills:
ASP powder steel

Made of ASP powder steel for drilling even the most difficult
Materials such as railroad tracks, stainless steels, exotic alloys
Always available where maximum service life is required

Step hardened HSS core drill

Standard hardened HSS core drills in stages
As a result extremely hard tooth tips (68 HRC) and still flexible core drill

Completely sanded from the full material

This fine grinding increases the cutting performance while reducing friction
For more service life

unique and patented Durablue coating

Extreme surface hardness and smoothness
Extreme service life even under less than ideal working conditions such as overhead work, dry drilling, etc

Five cutting geometries

Specially adapted cutting geometries especially for the different diameters and cutting depths

Suitable for core drills:
Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
Manufacturer
Karnasch
Straße des Friedens 10, 15848 Görsdorf, Germany
www.karnasch.de

109,11€ 120,95€

On request in weeks

Core drill HARD-LINE 55 Weldon Ø 115 mm

51-38720.1316115

Core drill optimally suited for:

Steel < 500 N
Steel < 750 N
Steel < 900 N
Steel < 1100 N
Steel < 1400 N
Stainless steel < 900 N
Stainless steel>900 N
Alu < 10% Si
Alu>10% Si
Copper, brass, nickel, tin
Plastics GFK / CFK
cast iron
Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
graphite

Good for:

rails

Properties of the carbide-tipped HARD-LINE core drills:
Pre-Intermediate-trimmer geometry

manufactured in elaborate pre-middle trimmer geometry
Thus: vibration-free, quiet and easy cutting with maximum service life

Conical spiral

Made with conical spiral
Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

Sandvik carbide teeth

Only equipped with Sandvik carbide teeth
NOTE: Only the best carbide is good enough for Karnasch core drills

Suitable for core drills:
Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
Manufacturer
Karnasch
Straße des Friedens 10, 15848 Görsdorf, Germany
www.karnasch.de

436,46€ 483,85€

On request in weeks

Folding device 500 x 3 mm for HPS 85DS

51-3887095

Zubehör für hydraulische Profilstahlscheren:
- HPS 45S
Nicht nachrüstbar, nur ab Werk bei Bestellung einer Neumaschine

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

4201,74€ 4657,92€

On request in weeks

Retrofit kit foot pedal for pump

51-4101021

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

126,29€ 140,00€

On request in weeks

Trizact sleeve A30

51-3726761

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

7,30€ 8,10€

On request in weeks

Abrasive belt with paper backing for stainless steel, metal universal, steel 8000 x 150 mm K220

51-3724122

High aggressiveness and tool life due to self-sharpening zirconia alumina
Excellent for coarse to fine sanding of metal
Exceptionally hard-wearing abrasive paper with long service life

Manufacturer
Klingspor GmbH & Co. KG
Hüttenstraße 36, 35708 Haiger, Germany
www.klingspor.de

131,51€ 145,79€

On request in weeks

Fabric grinding belt for stainless steel 5020 x 150 mm K180

51-3721618

Abrasive cloth with stable backing
For high stress with particularly good service life due to additional multi-bond
High abrasive performance in stainless steel processing without tarnishing
Cool grinding

Manufacturer
Klingspor GmbH & Co. KG
Hüttenstraße 36, 35708 Haiger, Germany
www.klingspor.de

223,09€ 247,31€

On request in weeks

Non-woven band VB760x40 / K240

51-3726867

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

104,14€ 115,45€

On request in weeks

Trizact band 618 x 40 mm, A16

51-3726855

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

4,97€ 5,50€

On request in weeks

Fabric grinding belt for stainless steel 5020 x 150 mm K80

51-3721380

Particularly tear-resistant high-performance sanding belt
With polyester backing: optimally suited when contact pressure during sanding is very high or for wet sanding
High stock removal rate and tool life due to additional multi-bond
For grinding stainless steel and high-alloy steels
Grain made of zirconia alumina with self-sharpening properties and aggressive grinding behavior
Cool grinding
Achieves very long tool life even when grinding non-ferrous metals

Manufacturer
Klingspor GmbH & Co. KG
Hüttenstraße 36, 35708 Haiger, Germany
www.klingspor.de

223,09€ 247,31€

On request in weeks

Trizact band 618 x 40 mm, A100

51-3726859

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

4,97€ 5,50€

On request in weeks

Fabric abrasive belt set for stainless steel, steel, metal universal 1220 x 100 mm

51-3726001

The ideal workshop sanding belt for daily use with changing workpieces and materials
Wide range of applications on various machines in dry sanding, for example when deburring sheet metal
High removal rate even at low contact pressure

Manufacturer
VSM Vereinigte Schleifmittel und Maschinen Fabriken AG
Siegmundstr. 17, 30165 Hannover, Germany
www.vsmag.de

79,79€ 88,46€

On request in weeks

Abrasive belt with cloth backing 940 x 50 mm K80

51-3728908

Suitable for round and flat grinding of steel and stainless steel
Long-life abrasive belt for a satin-finish result, with medium to high contact pressure
Designed for wet grinding

Long-life sanding belt for a silk-matt sanding pattern, with medium to high contact pressure
Extremely long service life, with consistent surface roughness and finish
Suitable for cylindrical and surface grinding of steel and stainless steel
Developed for wet grinding
High tool life and a constant grinding result even in dry grinding
Suitable for grinding operations at high speeds

Manufacturer
Klingspor GmbH & Co. KG
Hüttenstraße 36, 35708 Haiger, Germany
www.klingspor.de

56,99€ 63,18€

On request in weeks

Zirconia alumina tape VB618x40 / K80

51-3726862

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

1,55€ 1,71€

On request in weeks

Abrasive belt with cloth backing 5020 x 150 mm K220

51-3721822

Self-sharpening effect leads to a very high stock removal rate thanks to constantly emerging sharp grain tips
High wear resistance
Optimised price-performance ratio

Universal sanding belt for wood and metalworking.
Dense scattering enables aggressive sanding with a high material removal rate due to the large amount of grain tips
backing made of X-cotton on, which is particularly adaptable and tear-resistant
Suitable for coarse, fine and surface grinding, also particularly suitable for grinding contours due to its high adaptability
Optimum wear behavior
Wide range of applications
Very good price-performance ratio

Manufacturer
Klingspor GmbH & Co. KG
Hüttenstraße 36, 35708 Haiger, Germany
www.klingspor.de

164,64€ 182,51€

On request in weeks