METALLKRAFT

• Foot operated
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp bending bar
• In series with manual adjustment of the bending angle
• Especially low-maintenance
• The workpiece is clamped by a motorized mechanism
• S-models with segmented upper tools
• SH-models with high, segmented casting foot tools

• Other models
• Standard tools hardened
• Hardened sharp bending bar and bending bar
• Segmented tools and hardened bending bar
• Segmented casting foot tools and bending bar hardened

• With foot control
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp-bending rail
• Seriesßig with manual adjustment of the bending angle
• Especially low-maintenance
• Clamping of the workpiece is motor-driven
• SH models with high, segmented cast base tools
• DUO models with continuous sharp-bending rail and high, segmented goat foot tools

• Standard tools hardened
• Sharp bending bar and bending bar hardened
• Segmented tools and bending bar hardened
• Segmented cast foot tools and bending bar hardened

• Increased stability due to improved design of the machine base, cylinder adjustment via handle and hand wheel, manometer on the machine side
• Suitable for assembly and straightening work as well as for workpiece checks or the pressing and pressing of bearings and other components
• Ideal for technical workshops, repair shops and technical training facilities
• With two piston speeds and pressure regulation by throttle screw
• Pressure gauge for pressure gauge
• Heavy machine frame welded from steel profiles to absorb the resulting compressive force of the cylinder
• The hydraulics work extremely precisely in both electrical and manual mode
• Adjustment of the cylinder via rack to handwheel
• Heavy and robust welded construction
• More extensive accessories
• Quality made in Europe

• Foot operated
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp bending bar
• In series with manual adjustment of the bending angle
• Especially low-maintenance
• The workpiece is clamped by a motorized mechanism
• S-models with segmented upper tools
• SH-models with high, segmented casting foot tools

• Other models
• Standard tools hardened
• Hardened sharp bending bar and bending bar
• Segmented tools and hardened bending bar
• Segmented casting foot tools and bending bar hardened

• The clamping of the workpiece is done by hand clamping
• Easy fixing of the set bending angle, which ensures a high repeatability
• Self-lubricating plain bearings
• The basic version can be converted at any time to high upper beam, high-segmented upper beam or high-segmented upper beam with Geißfuß by means of optional mounting kits

Note on abbreviations

• N = with low upper cheek
• H = with high upper cheek
• S = with segment rail
• G = with Geissfuß

• Powerful and quiet drive via LENZE gear motors with brake
• Compact, heavy and stress-free welded steel construction
• Sharp bending rail made of tool steel C50 at the clamping cheek
• Continuous, exchangeable bed support made of tool steel C50
• Continuous bending rail made of tool steel C50 at the bending beam
• Automatic pressure regulation of the clamping cheek via motor current pick-up
• Drive of the clamping cheek via generously dimensioned trapezoidal thread spindles
• Bending angle adjustment PT 1 via potentiometer on the machine front (right)
• Manual fine adjustment of bending beam with scale
• Manual crowning via pressure screws in the bending beam
• Foot remote control with emergency stop function
• All moving parts with low-maintenance bearings
• Electrical components from Schneider or Omron
• SH-models with high, segmented goat's foot tools
• Quality Made in Europe
• Available on request: Models in DUO design with continuous sharp bending rail and segmented goad foot tools, standard tools hardened, sharp bending rail and bending bar hardened, segmented tools and bending bar hardened, segmented goad foot tools and bending bar hardened

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 400 mm
• Precision flat steel guide attached to the rear of the roller conveyor
• Sturdy, 6-way ball-bearing material stop trolley, easy-moving, manually movable and lockable
• Stopper with reading magnifying glass facilitates reading on the mm scale
• Robust stop arm attached to the stop truck, adjustable to the tool (0 point)
• Quality Made in Germany

Working height up to 1020 mm possible with optional foot plates.

By request:

• Working height from 1020 mm can be extended from the factory
• Also with 500 mm web width

• Saw head swivelby by 45° to the left and right
• Stable and robust construction
• Precise cut
• Turntable and saw shaft mounted on bearings
• Quick-release screw sticks with plastic-equipped aluminium clamping jaws
• Easy and hassle-free operation
• Saw head for chiverge cut by 45° to the left tiltable
• Two pneumatic vices
• Control handle with safety switch

• Segmented goat foot tool with quick-change system in the upper beam
• Segmented bending bar and bed support
• Backgauge up to 500mm
• Foot quick clamping for workpiece fixation
• Transport rollers with locking brake

• Segmented goat foot tool with quick-change system in the upper beam
• Segmented bending bar and bed support
• Backgauge up to 500mm
• Foot quick clamping for workpiece fixation
• Transport rollers with locking brake

• The workpiece clamping by means of foot pedal thereby both hands remain free for the material supply
• Different tool variants available E, S2, HS2 and HSG
• The powerful auxiliary cylinder facilitates bending
• Next passage between top and bottom cheek of up to 25 mm
• Self-lubricating plain bearings
• Clamping pressure of the upper beam via non-slip thumbscrews easily adjustable
• Adjustment of material thickness by means of knurled screw
• Adjustable stop for bending angle

• With segmented sharp-bending tools, continuous bending strip and continuous bed support

• With segmented sharpening tools, segmented bending strip and continuous bed support

• With segmented gooseneck tools, segmented bending bar and segmented bed support
• Segments have a hardness of HRC24-26

• Sheet thickness max.: Performance data based on material with tensile strength 400 N/mm²
• Bending capacity VA: factor 0.75
• Bending capacity aluminum: factor 1.2
• Hardened top tools are required to bend VA

• Two-column guided horizontal saw for sawing solid bars and bar profiles
• Mitsubishi FX 5 control system with simple operation via 4.3" touchscreen
• Cutting movement via hydraulic cylinder
• With BRP (cutting feed control) -> if a set ampere limit is exceeded, the feed movement is stopped while the saw blade continues to run in order to convey chips out of the cutting channel. Once the normal load is reached, the sawing process continues
• Automatic positioning after entering the desired angle
• Hydraulic clamping of the turntable enables precise angular cutting
• Robust machine body and the smallest possible distances between the saw blade, machine guide and workpiece minimize vibrations for maximum sawing performance
• Infinitely variable cutting speed from 15 - 150 m/min
• Saw blade drive via bevel gearbox, asynchronous motor and frequency inverter
• For straight cuts, the material is clamped in front of and behind the cut using a two-part vice
• Pressure adjustment of the hydraulic vice clamping via control valve with pressure gauge
• Saw blade inclination of 7° and hydraulic saw blade tension increase the service life of the saw blade
• Front band guide moves automatically parallel to the movable vice jaw
• chip clearing brush driven via belt roller
• Emulsion cooling with liquid distribution into the saw blade guides and directly into the cutting channel
• More powerful motor optionally available
• Saw blade guides with integrated cooling system

• Safe workpiece support thanks to solid and heavy-duty steel rollers
• Heavy three-legged version for highest load

• For supporting long and heavy workpieces
• Universally applicable for eg metal circular saws, band saws, woodworking machines, etc.
• Roller support infinitely height adjustable and clampable
• Safe workpiece support thanks to solid and heavy-duty steel rollers
• Heavy three-legged version for highest load

• User-friendly and energy-saving thanks to pneumatic drive
• Solid table with recessed scales and T-slots for precise adjustment of the pivoting stops
• Plexiglas finger guard for optimum view of the cutting edge

• Sturdy construction
• User-friendly and energy-saving thanks to pneumatic drive
• Solid table with recessed scales and T-slots for precise adjustment of the pivoting stops
• Plexiglas finger guard for optimum view of the cutting edge
• Operation via foot pedal

• Powerful motor and vibration-free operation for the best sanding results
• Continuous face sanding surface thanks to removable attachments enables sanding of even long workpieces
• With two belt speeds
• Quick-clamping system enables fast sanding belt changes
• One extraction nozzle each directly on the spark box and on the rear belt roller
• Can be used with and without suction
• Easy adjustment of the belt run via adjusting screw on the front contact roller
• Automatic retensioning of the sanding belt thanks to spring-loaded belt tensioning system
• Infinitely tiltable sanding unit
• Fold-away protective screen

• Two-column guided band saw for sawing solid bar material and bar profilesMitsubishi
• FX 5 control system with simple operation via 4.3" touchscreenCutting movement
• via hydraulic cylindersWith
• BRP (cutting feed control): if a set ampere limit is exceeded, the feed movement is stopped while the saw blade continues to run in order to convey chips out of the cutting channel. Once the normal load is reached, the sawing process continuesRobust
• machine body and the smallest possible distances between the saw blade, machine guide and workpiece minimize vibrations for maximum sawing performanceInfinitely variable
• cutting speed from 15 - 150 m/minSaw blade drive
• via bevel gearbox, Asynchronous motor and frequency converterClamping
• of the material in front of and behind the cut by means of a two-part vicePressure adjustment
• of the hydraulic vice clamping via control valve with pressure gaugeSaw blade inclination
• of 7° and hydraulic saw blade tensioning increase the service life of the saw
• bladeFront
• blade
guide moves automatically parallel to the moving
• saw blade
• Band guide moves automatically parallel to the moving vice jawElectrically
• driven chip clearing brushEmulsion cooling
• with liquid distribution into the saw band guides and directly into the cutting channelMore powerful
• motor optionally availableSaw band guides
• with integrated cooling system/ul>

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Extremely stable construction, entire machine body made of steel
• User-friendly operating concept
• Speed infinitely variable via inverter - Greater ease of operation and no need to replace wearing parts such as V-belts
• Combined micro-spray and blow-off device, for blowing off chips and lubricating the saw blade
• Tiltable working table made of cast iron
• Workplace lighting as standard
• Equipped with motor brake
• Belt tension and speed indicator
• Integrated band welding unit with annealing, cutting and grinding device
• Height adjustment of saw band guide by hand wheel
• VMBS I E models with electric table feed

• Powerful and quiet drive via LENZE gear motors with brake
• Compact, heavy and stress-free welded steel construction
• Sharp bending rail made of tool steel C50 at the clamping cheek
• Continuous, exchangeable bed support made of tool steel C50
• Continuous bending rail made of tool steel C50 at the bending beam
• Automatic pressure regulation of the clamping cheek via motor current pick-up
• Drive of the clamping cheek via generously dimensioned trapezoidal thread spindles
• Bending angle adjustment PT 1 via potentiometer on the machine front (right)
• Manual fine adjustment of bending beam with scale
• Manual crowning via pressure screws in the bending beam
• Foot remote control with emergency stop function
• All moving parts with low-maintenance bearings
• Electrical components from Schneider or Omron
• SH-models with high, segmented goat's foot tools
• Quality Made in Europe
• Available on request: Models in DUO design with continuous sharp bending rail and segmented goad foot tools, standard tools hardened, sharp bending rail and bending bar hardened, segmented tools and bending bar hardened, segmented goad foot tools and bending bar hardened

• For steel
• two cutting speeds
• Reduction gear, silent in oil bath running
• automatic membrane coolant pump with standard coolant filter
• movable protection device ensures optimum safety when cutting
• Control handle with safety switch
• electrical system in low voltage 24 volts, with emergency stop switch, main switch, speed selector and overload protection
• Machine head rotatable by 45 ° on both sides
• 45 ° swiveling quick-action vice on both sides
• Quick-action vise with double clamping device guarantees a precise and low-profile cut
• Quality Made in Europe

• 45 ° swiveling quick-action vice on both sides

• Semi-motor version - manual operation of the upper cheek, bending process motorised
• Designed for professional use
• With foot operation
• heavy, compact weldment
• With continuous sharp bending rail
• Standard with manual adjustment of the bending angle by means of nonius ring
• Particularly low-maintenance
• S-models with segmented top tools
• SH models with high, segmented goat foot tools
• Hardening of standard tools available on request: sharp bending rail and bending strip hardened, segmented tools and bending strip hardened, segmented goat foot tools and bending strip hardened
• Further swivel bending machines available on request