Metalworking machines

Core drill BLUE-LINE PRO 30 Weldon, Ø 33 mm

51-38720.128433

Core drill optimally suited for:

Steel < 500 N
Steel < 750 N
Steel < 900 N
Steel < 1100 N
Stainless steel < 900 N
Stainless steel>900 N
Alu < 10% Si
Alu>10% Si
Copper, brass, nickel, tin
Plastics GFK / CFK
cast iron
Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
rails

Good for:

Steel < 1400 N

Use possible with:

graphite

Characteristics of BLUE-LINE core drills:
ASP powder steel

Made of ASP powder steel for drilling even the most difficult
Materials such as railroad tracks, stainless steels, exotic alloys
Always available where maximum service life is required

Step hardened HSS core drill

Standard hardened HSS core drills in stages
As a result extremely hard tooth tips (68 HRC) and still flexible core drill

Completely sanded from the full material

This fine grinding increases the cutting performance while reducing friction
For more service life

unique and patented Durablue coating

Extreme surface hardness and smoothness
Extreme service life even under less than ideal working conditions such as overhead work, dry drilling, etc

Five cutting geometries

Specially adapted cutting geometries especially for the different diameters and cutting depths

Suitable for core drills:
Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
Manufacturer
Karnasch
Straße des Friedens 10, 15848 Görsdorf, Germany
www.karnasch.de

158,21€ 175,40€

On request in weeks

Core drill HARD-LINE 80 Weldon Ø 22 mm

51-38720.165022

Core drill optimally suited for:

Steel < 500 N
Steel < 750 N
Steel < 900 N
Steel < 1100 N
Steel < 1400 N
Stainless steel < 900 N
Stainless steel>900 N
Alu < 10% Si
Alu>10% Si
Copper, brass, nickel, tin
Plastics GFK / CFK
cast iron
Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
graphite

Good for:

rails

Properties of the carbide-tipped HARD-LINE core drills:
Pre-Intermediate-trimmer geometry

manufactured in elaborate pre-middle trimmer geometry
Thus: vibration-free, quiet and easy cutting with maximum service life

Conical spiral

Made with conical spiral
Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

Sandvik carbide teeth

Only equipped with Sandvik carbide teeth
NOTE: Only the best carbide is good enough for Karnasch core drills

Suitable for core drills:
Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
Manufacturer
Karnasch
Straße des Friedens 10, 15848 Görsdorf, Germany
www.karnasch.de

82,94€ 91,95€

On request in weeks

Thermo drill THERMDRILL CUT 1/4" short

51-3060342

Thermdrill replaces rivet nuts

With the Thermdrill process, you can easily create 100% torsion-proof and wobble-free threaded bushes from the existing material in just two steps. And at a fraction of the cost of rivet nuts.

100% torsion-proof
For steel, VA, non-ferrous metal, aluminum
For all common thread sizes
From 1.0 mm wall thickness
For pillar drills, milling machines and CNC (assuming sufficient speed and motor power)

Manufacturer
ONTOOL GmbH
Franz-Gruber-Platz 13, 64859 Eppertshausen, Germany
www.ontool.eu

241,39€ 267,60€

On request in weeks

Core drill HARD-LINE 55 Universal Ø 50 mm

51-38720.131650

Core drill optimally suited for:

Steel < 500 N
Steel < 750 N
Steel < 900 N
Steel < 1100 N
Steel < 1400 N
Stainless steel < 900 N
Stainless steel>900 N
Alu < 10% Si
Alu>10% Si
Copper, brass, nickel, tin
Plastics GFK / CFK
cast iron
Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
graphite

Good for:

rails

Properties of the carbide-tipped HARD-LINE core drills:
Pre-Intermediate-trimmer geometry

manufactured in elaborate pre-middle trimmer geometry
Thus: vibration-free, quiet and easy cutting with maximum service life

Conical spiral

Made with conical spiral
Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

Sandvik carbide teeth

Only equipped with Sandvik carbide teeth
NOTE: Only the best carbide is good enough for Karnasch core drills

Suitable for core drills:
Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
Manufacturer
Karnasch
Straße des Friedens 10, 15848 Görsdorf, Germany
www.karnasch.de

109,88€ 121,81€

On request in weeks

Core drill HARD-LINE 80 Weldon Ø 100 mm

51-38720.1650100

Core drill optimally suited for:

Steel < 500 N
Steel < 750 N
Steel < 900 N
Steel < 1100 N
Steel < 1400 N
Stainless steel < 900 N
Stainless steel>900 N
Alu < 10% Si
Alu>10% Si
Copper, brass, nickel, tin
Plastics GFK / CFK
cast iron
Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
graphite

Good for:

rails

Properties of the carbide-tipped HARD-LINE core drills:
Pre-Intermediate-trimmer geometry

manufactured in elaborate pre-middle trimmer geometry
Thus: vibration-free, quiet and easy cutting with maximum service life

Conical spiral

Made with conical spiral
Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

Sandvik carbide teeth

Only equipped with Sandvik carbide teeth
NOTE: Only the best carbide is good enough for Karnasch core drills

Suitable for core drills:
Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
Manufacturer
Karnasch
Straße des Friedens 10, 15848 Görsdorf, Germany
www.karnasch.de

516,15€ 572,20€

On request in weeks

Core drill HARD-LINE 40 Universal, Ø 16 mm

51-38720.131516

Core drill optimally suited for:

Steel < 500 N
Steel < 750 N
Steel < 900 N
Steel < 1100 N
Steel < 1400 N
Stainless steel < 900 N
Stainless steel>900 N
Alu < 10% Si
Alu>10% Si
Copper, brass, nickel, tin
Plastics GFK / CFK
cast iron
Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
graphite

Good for:

rails

Properties of the carbide-tipped HARD-LINE core drills:
Pre-Intermediate-trimmer geometry

manufactured in elaborate pre-middle trimmer geometry
Thus: vibration-free, quiet and easy cutting with maximum service life

Conical spiral

Made with conical spiral
Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

Sandvik carbide teeth

Only equipped with Sandvik carbide teeth
NOTE: Only the best carbide is good enough for Karnasch core drills

Suitable for core drills:
Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
Manufacturer
Karnasch
Straße des Friedens 10, 15848 Görsdorf, Germany
www.karnasch.de

49,49€ 54,87€

On request in weeks

Ejector pin Ø 7.98 x 157 mm, two-piece

51-38720.1428

Suitable for core drills with diameter 18 - 50 mm and drilling depth 110 mm

Application:

Insert part -1- into the shank of the core drill
Slide part -2- to part -1-
Drill up to approx. 50 mm cutting depth
Then remove part -2- and continue drilling

Can be used with METALLKRAFT core drills:

HARD-LINE 110 Weldon Ø 18 - 50 mm

Manufacturer
Karnasch
Straße des Friedens 10, 15848 Görsdorf, Germany
www.karnasch.de

53,49€ 59,31€

On request in weeks

Thermo drill THERMDRILL CUT M6 short

51-3060166

Thermdrill replaces rivet nuts

With the Thermdrill process, you can easily create 100% torsion-proof and wobble-free threaded bushes from the existing material in just two steps. And at a fraction of the cost of rivet nuts.

100% torsion-proof
For steel, VA, non-ferrous metal, aluminum
For all common thread sizes
From 1.0 mm wall thickness
For pillar drills, milling machines and CNC (assuming sufficient speed and motor power)

Manufacturer
ONTOOL GmbH
Franz-Gruber-Platz 13, 64859 Eppertshausen, Germany
www.ontool.eu

157,84€ 174,96€

On request in weeks

Core drill HARD-LINE 55 Weldon Ø 85 mm

51-38720.131685

Core drill optimally suited for:

Steel < 500 N
Steel < 750 N
Steel < 900 N
Steel < 1100 N
Steel < 1400 N
Stainless steel < 900 N
Stainless steel>900 N
Alu < 10% Si
Alu>10% Si
Copper, brass, nickel, tin
Plastics GFK / CFK
cast iron
Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
graphite

Good for:

rails

Properties of the carbide-tipped HARD-LINE core drills:
Pre-Intermediate-trimmer geometry

manufactured in elaborate pre-middle trimmer geometry
Thus: vibration-free, quiet and easy cutting with maximum service life

Conical spiral

Made with conical spiral
Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

Sandvik carbide teeth

Only equipped with Sandvik carbide teeth
NOTE: Only the best carbide is good enough for Karnasch core drills

Suitable for core drills:
Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
Manufacturer
Karnasch
Straße des Friedens 10, 15848 Görsdorf, Germany
www.karnasch.de

252,95€ 280,40€

On request in weeks

Core drill BLUE-LINE PRO 30 Weldon, Ø 34 mm

51-38720.128434

Core drill optimally suited for:

Steel < 500 N
Steel < 750 N
Steel < 900 N
Steel < 1100 N
Stainless steel < 900 N
Stainless steel>900 N
Alu < 10% Si
Alu>10% Si
Copper, brass, nickel, tin
Plastics GFK / CFK
cast iron
Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
rails

Good for:

Steel < 1400 N

Use possible with:

graphite

Characteristics of BLUE-LINE core drills:
ASP powder steel

Made of ASP powder steel for drilling even the most difficult
Materials such as railroad tracks, stainless steels, exotic alloys
Always available where maximum service life is required

Step hardened HSS core drill

Standard hardened HSS core drills in stages
As a result extremely hard tooth tips (68 HRC) and still flexible core drill

Completely sanded from the full material

This fine grinding increases the cutting performance while reducing friction
For more service life

unique and patented Durablue coating

Extreme surface hardness and smoothness
Extreme service life even under less than ideal working conditions such as overhead work, dry drilling, etc

Five cutting geometries

Specially adapted cutting geometries especially for the different diameters and cutting depths

Suitable for core drills:
Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
Manufacturer
Karnasch
Straße des Friedens 10, 15848 Görsdorf, Germany
www.karnasch.de

158,21€ 175,40€

On request in weeks

Core drill HARD-LINE 110 Weldon Ø 64 mm

51-38720.166064

Core drill optimally suited for:

Steel < 500 N
Steel < 750 N
Steel < 900 N
Steel < 1100 N
Steel < 1400 N
Stainless steel < 900 N
Stainless steel>900 N
Alu < 10% Si
Alu>10% Si
Copper, brass, nickel, tin
Plastics GFK / CFK
cast iron
Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
graphite

Good for:

rails

Properties of the carbide-tipped HARD-LINE core drills:
Pre-Intermediate-trimmer geometry

manufactured in elaborate pre-middle trimmer geometry
Thus: vibration-free, quiet and easy cutting with maximum service life

Conical spiral

Made with conical spiral
Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

Sandvik carbide teeth

Only equipped with Sandvik carbide teeth
NOTE: Only the best carbide is good enough for Karnasch core drills

Suitable for core drills:
Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
Manufacturer
Karnasch
Straße des Friedens 10, 15848 Görsdorf, Germany
www.karnasch.de

327,73€ 363,31€

On request in weeks

Core drill HARD-LINE 110 Weldon Ø 95 mm

51-38720.166095

Core drill optimally suited for:

Steel < 500 N
Steel < 750 N
Steel < 900 N
Steel < 1100 N
Steel < 1400 N
Stainless steel < 900 N
Stainless steel>900 N
Alu < 10% Si
Alu>10% Si
Copper, brass, nickel, tin
Plastics GFK / CFK
cast iron
Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
graphite

Good for:

rails

Properties of the carbide-tipped HARD-LINE core drills:
Pre-Intermediate-trimmer geometry

manufactured in elaborate pre-middle trimmer geometry
Thus: vibration-free, quiet and easy cutting with maximum service life

Conical spiral

Made with conical spiral
Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

Sandvik carbide teeth

Only equipped with Sandvik carbide teeth
NOTE: Only the best carbide is good enough for Karnasch core drills

Suitable for core drills:
Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
Manufacturer
Karnasch
Straße des Friedens 10, 15848 Görsdorf, Germany
www.karnasch.de

651,83€ 722,60€

On request in weeks

Core drill BLUE-LINE PRO 30 Weldon, Ø 19 mm

51-38720.128419

Core drill optimally suited for:

Steel < 500 N
Steel < 750 N
Steel < 900 N
Steel < 1100 N
Stainless steel < 900 N
Stainless steel>900 N
Alu < 10% Si
Alu>10% Si
Copper, brass, nickel, tin
Plastics GFK / CFK
cast iron
Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
rails

Good for:

Steel < 1400 N

Use possible with:

graphite

Characteristics of BLUE-LINE core drills:
ASP powder steel

Made of ASP powder steel for drilling even the most difficult
Materials such as railroad tracks, stainless steels, exotic alloys
Always available where maximum service life is required

Step hardened HSS core drill

Standard hardened HSS core drills in stages
As a result extremely hard tooth tips (68 HRC) and still flexible core drill

Completely sanded from the full material

This fine grinding increases the cutting performance while reducing friction
For more service life

unique and patented Durablue coating

Extreme surface hardness and smoothness
Extreme service life even under less than ideal working conditions such as overhead work, dry drilling, etc

Five cutting geometries

Specially adapted cutting geometries especially for the different diameters and cutting depths

Suitable for core drills:
Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
Manufacturer
Karnasch
Straße des Friedens 10, 15848 Görsdorf, Germany
www.karnasch.de

86,44€ 95,83€

On request in weeks

Core drill HARD-LINE 40 Universal, Ø 14 mm

51-38720.131514

Core drill optimally suited for:

Steel < 500 N
Steel < 750 N
Steel < 900 N
Steel < 1100 N
Steel < 1400 N
Stainless steel < 900 N
Stainless steel>900 N
Alu < 10% Si
Alu>10% Si
Copper, brass, nickel, tin
Plastics GFK / CFK
cast iron
Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
graphite

Good for:

rails

Properties of the carbide-tipped HARD-LINE core drills:
Pre-Intermediate-trimmer geometry

manufactured in elaborate pre-middle trimmer geometry
Thus: vibration-free, quiet and easy cutting with maximum service life

Conical spiral

Made with conical spiral
Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

Sandvik carbide teeth

Only equipped with Sandvik carbide teeth
NOTE: Only the best carbide is good enough for Karnasch core drills

Suitable for core drills:
Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
Manufacturer
Karnasch
Straße des Friedens 10, 15848 Görsdorf, Germany
www.karnasch.de

49,49€ 54,87€

On request in weeks

Core drill HARD-LINE 110 Weldon Ø 19 mm

51-38720.166019

Core drill optimally suited for:

Steel < 500 N
Steel < 750 N
Steel < 900 N
Steel < 1100 N
Steel < 1400 N
Stainless steel < 900 N
Stainless steel>900 N
Alu < 10% Si
Alu>10% Si
Copper, brass, nickel, tin
Plastics GFK / CFK
cast iron
Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
graphite

Good for:

rails

Properties of the carbide-tipped HARD-LINE core drills:
Pre-Intermediate-trimmer geometry

manufactured in elaborate pre-middle trimmer geometry
Thus: vibration-free, quiet and easy cutting with maximum service life

Conical spiral

Made with conical spiral
Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

Sandvik carbide teeth

Only equipped with Sandvik carbide teeth
NOTE: Only the best carbide is good enough for Karnasch core drills

Suitable for core drills:
Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
Manufacturer
Karnasch
Straße des Friedens 10, 15848 Görsdorf, Germany
www.karnasch.de

105,73€ 117,22€

On request in weeks

Workpiece support for BSM 75

51-3357881

Workpiece support suitable for belt sander OPTIgrind BSM 75
infinitely adjustable
allows quick sanding

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

26,85€ 29,76€

On request in weeks

Core drill HARD-LINE 40 Universal, Ø 27 mm

51-38720.131527

Core drill optimally suited for:

Steel < 500 N
Steel < 750 N
Steel < 900 N
Steel < 1100 N
Steel < 1400 N
Stainless steel < 900 N
Stainless steel>900 N
Alu < 10% Si
Alu>10% Si
Copper, brass, nickel, tin
Plastics GFK / CFK
cast iron
Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
graphite

Good for:

rails

Properties of the carbide-tipped HARD-LINE core drills:
Pre-Intermediate-trimmer geometry

manufactured in elaborate pre-middle trimmer geometry
Thus: vibration-free, quiet and easy cutting with maximum service life

Conical spiral

Made with conical spiral
Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

Sandvik carbide teeth

Only equipped with Sandvik carbide teeth
NOTE: Only the best carbide is good enough for Karnasch core drills

Suitable for core drills:
Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
Manufacturer
Karnasch
Straße des Friedens 10, 15848 Görsdorf, Germany
www.karnasch.de

53,49€ 59,31€

On request in weeks

Core drill BLPRO55WLDM33MM

51-38720.131733

Core drill optimally suited for:

Steel < 500 N
Steel < 750 N
Steel < 900 N
Steel < 1100 N
Stainless steel < 900 N
Stainless steel>900 N
Alu < 10% Si
Alu>10% Si
Copper, brass, nickel, tin
Plastics GFK / CFK
cast iron
Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
rails

Good for:

Steel < 1400 N

Use possible with:

graphite

Characteristics of BLUE-LINE core drills:
ASP powder steel

Made of ASP powder steel for drilling even the most difficult
Materials such as railroad tracks, stainless steels, exotic alloys
Always available where maximum service life is required

Step hardened HSS core drill

Standard hardened HSS core drills in stages
As a result extremely hard tooth tips (68 HRC) and still flexible core drill

Completely sanded from the full material

This fine grinding increases the cutting performance while reducing friction
For more service life

unique and patented Durablue coating

Extreme surface hardness and smoothness
Extreme service life even under less than ideal working conditions such as overhead work, dry drilling, etc

Five cutting geometries

Specially adapted cutting geometries especially for the different diameters and cutting depths

Suitable for core drills:
Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
Manufacturer
Karnasch
Straße des Friedens 10, 15848 Görsdorf, Germany
www.karnasch.de

102,49€ 113,61€

On request in weeks

Thermo drill + thread former THERMDRILL Thread Tool Set FORM M6 short

51-3060506

Thermdrill replaces rivet nuts

With the Thermdrill process, you can easily create 100% torsion-proof and wobble-free threaded bushes from the existing material in just two steps. And at a fraction of the cost of rivet nuts.

100% torsion-proof
For steel, VA, non-ferrous metal, aluminum
For all common thread sizes
From 1.0 mm wall thickness
For pillar drills, milling machines and CNC (assuming sufficient speed and motor power)

Manufacturer
ONTOOL GmbH
Franz-Gruber-Platz 13, 64859 Eppertshausen, Germany
www.ontool.eu

131,30€ 145,56€

On request in weeks

Core drill HARD-LINE 55 Weldon Ø 66 mm

51-38720.131666

Core drill optimally suited for:

Steel < 500 N
Steel < 750 N
Steel < 900 N
Steel < 1100 N
Steel < 1400 N
Stainless steel < 900 N
Stainless steel>900 N
Alu < 10% Si
Alu>10% Si
Copper, brass, nickel, tin
Plastics GFK / CFK
cast iron
Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
graphite

Good for:

rails

Properties of the carbide-tipped HARD-LINE core drills:
Pre-Intermediate-trimmer geometry

manufactured in elaborate pre-middle trimmer geometry
Thus: vibration-free, quiet and easy cutting with maximum service life

Conical spiral

Made with conical spiral
Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

Sandvik carbide teeth

Only equipped with Sandvik carbide teeth
NOTE: Only the best carbide is good enough for Karnasch core drills

Suitable for core drills:
Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
Manufacturer
Karnasch
Straße des Friedens 10, 15848 Görsdorf, Germany
www.karnasch.de

181,78€ 201,51€

On request in weeks