НОВЫЕ ПРОДУКТЫ

• Solid cast iron bench bed for extremely smooth running
• ASR run-off protection groove for maximum safety when fastening clamping devices
• Manual speed adjustment via 5-stage belt drive
• Easy switching between clockwise and counter-clockwise rotation

• Solid cast iron bench bed for extremely smooth running
• ASR run-off protection groove for maximum safety when fastening clamping devices
• Manual speed adjustment via 5-stage belt drive
• Easy switching between clockwise and counter-clockwise rotation
• Can also be used as a stand-alone machine thanks to optional base frame

• For milling, planing and sawdust
• High-quality, stable chassis for easy manoeuvring

• For milling, planing and sawdust (not suitable for dust)
• 180° rotatable suction unit enables suction routing from below or above
• Stable fan wheel made of metal
• Standard with high-quality chassis for better stability and easy manoeuvring
• Quick-release fasteners for filter and chip sack

• Infinitely adjustable sanding unit (0 - 90°) for vertical and horizontal sanding
• Oscillating sanding belt for better sanding results and a longer service life of the sanding belt
• Quick and easy sanding belt change via quick-release system
• Sanding pad with graphite coating as standard for a longer service life of the sanding belt
• Cast iron work table with T-slot, adjustable via handwheel
• Including lateral sanding sleeve device for sanding curves and radii
• Two extraction sockets Ø 100 mm

• Universally applicable also for plastic, metal, glass, styrofoam, paper and the like
• Particularly robust construction
• Housing made of galvanized sheet steel
• Paddle wheel fan for increased suction power
• Significantly reduced dust content due to double-woven fine filter bag
• Extractors comply with dust class L
• Basic units are pre-assembled in modular design
• For large systems only short installation times
• Top value for money
• Short assembly times thanks to modular design

• High-performance bag filter with special surface coating
• Filter of category M
• Dust tested to H3, residual dust content < 0.1 mg / m³
• Large dimensioned filling container for easy and quick replacement of chip bags extendable
• Level controlled by a sight glass
• Approved as industrial vacuum cleaner in conjunction with a floor cleaning set
• Reduced power consumption at full suction power and economical consumption thanks to optimized air flow and high-performance fan with backward-curved impeller arranged on the clean air side
• With aerodynamically sophisticated housing
• Optimum pre-separation by a cyclone already in the intake area
• Filters with large folds, therefore easy to clean, so that highest filter life is achieved and only very low maintenance and operating costs
• Filter cleaning via a hand lever
• M version with automatic filter cleaning
• Due to its low weight, swivel castors and large handles, it can be used quickly and efficiently at various workstations

• For use in workshops with a simultaneity factor of 1-2 machines, from RLA 2501 2-3 machines (depending on the required volume flow) or as a decentralized extraction unit to supplement an existing stationary system
• For universal use with a wide range of materials - also suitable for dry aluminum chips!
• 100% air recirculation without additional costs and construction work
• Delivery ready for connection
• High suction capacity
• Low costs for pipe components and installation, especially when replacing old and no longer approved systems
• Integrated pre-separation chamber to reduce the load and protect the filters
• Compact dimensions, allowing the units to be installed in previously unused areas
• Intake side can be ordered with orientation to the left or right, enabling the use of workshop niches
• Control system can be expanded using plug-in technology

From model RLA 2501 P:

• Optimum filter cleaning during operation (RLA 1601P-2001P) and at standstill after a minimum running time has been added up

• For use in workshops with a simultaneity factor of 1-2 machines, from RLA 2501 2-3 machines (depending on the required volume flow) or as a decentralized extraction unit to supplement an existing stationary system
• For universal use with a wide range of materials - also suitable for dry aluminum chips!
• 100% air recirculation without additional costs and construction work
• Delivery ready for connection
• High suction capacity
• Low costs for pipe components and installation, especially when replacing old and no longer approved systems
• Integrated pre-separation chamber to reduce the load and protect the filters
• Compact dimensions, allowing the units to be installed in previously unused areas
• Intake side can be ordered with orientation to the left or right, enabling the use of workshop niches
• Control system can be expanded using plug-in technology

From model RLA 2501 P:

• Optimum filter cleaning during operation (RLA 1601P-2001P) and at standstill after a minimum running time has been added up

• Enables dust-free sanding without an external extraction system
• Built-in fan for reliable extraction
• High suction power due to large filter surface
• Filtered air is recirculated - ensures clean air at the workplace
• Fold-away side panels for sanding longer workpieces
• Rubberized table pads prevent scratches on sensitive surfaces
• Pull-out dust collector at the front for easy emptying
• Compact design - ideal for workshops with limited space

• Torsion-free and vibration-free design
• Height-adjustable sanding tables
• Additional sanding surface

• Heavy machine stand guarantees high torsional rigidity and vibration-free working
• Better sanding results due to belt oscillation via separate geared motor
• Optionally selectable oscillation
• Fine edge veneer edge sanding device standard
• Grooved ramp for veneer overhang
• Quick conversion from veneer to solid wood sanding
• Height adjustable sanding table to utilize the entire sanding belt width
• Height adjustment of the sanding table and sanding unit swiveling via handwheels
• Height-adjustable additional table with suction for sanding of radii
• Optimal chip removal by suction at the aggregate and at the cross table
• Automatic compensation of belt length differences by spring-loaded belt tension

• Belt sanding unit can be swiveled through 0 - 90
• Quick change of sanding belts via quick clamping system
• Simple belt run adjustment
• Rubberized drive roller to prevent the sanding belt from slipping
• Sturdy substructure for high stability and safety during operation

• Swivel belt sanding unit - flexibly adjustable from 0° to 90° for versatile sanding work
• Infinitely variable speed control - ideal for processing a wide range of materials
• Quick change of sanding belts via quick-release system
• Simple belt run adjustment
• Graphite-coated sanding pad - ensures less wear and longer service life of the sanding belt
• Stable substructure for high stability and safety during operation
• Practical base cabinet with storage shelf
• Solid steel unit suspension
• Equipped with angle stop on the work table
• Two extraction connections for an external extraction system

• Practically proven model for a low price
• Ideal for many applications where chips and dust are generated, eg sanding wood
• Ideal for use in workrooms, including schools
• Connection of external extraction via a large nozzle
• Practical suction downwards prevents the circulation of chips and dust in the workplace and in the workshop
• Clean air when working with hand sanders
• Funnel-shaped airflow to the exhaust pipe
• Stable, simple table construction
• Table height easily and without tools mechanically adjustable via hand screws
• Workpiece-protecting supports made of wood or metal with rubber pads available as accessories

• Supports the production of table tops and the gluing of solid edges
• Uniform vertical pressure due to double spring-loaded guidance of the hand-hydraulic pressing units
• Horizontally and vertically adjustable
• Integrated hold-down device for full-surface support of the workpiece

• Ideal in woodworking plants, in joineries / carpentry stores and general trades
• Highly efficient air purification with high degree of separation
• Mobile device for use in different places in the workshop
• Easy handling
• Certified for ATEX Zone 2
• Long filter service life
• Delivered ready to plug in

• Vertical design for splitting short and meter timber
• Quick, tool-free splitting height adjustment
• Low base plate for easy, low-fatigue loading of large logs
• Powerful industrial hydraulic system
• Two-hand safety circuit
• With splitting material holder

• Vertical design for splitting logs and meters of wood
• Robust and solid construction
• Shock and scratch resistant due to high quality powder coating
• Fast, tool-free gap height adjustment
• Low base plate for easy, fatigue-free loading of large logs
• Convenient transport with a hand drawbar due to the standard chassis with large pneumatic wheels and an additional support wheel
• Space-saving storage by simply lowerable cylinder
• Powerful industrial hydraulic system
• Two-hand safety control
• With log holder

• Ideal for the production of frames, windows and doors thanks to horizontal and vertical pressing units
• Central generation of hydraulic pressure via hand pump with pressure indicator
• Each pressing unit can be switched off individually with stopcock
• Integrated hold-down device for full-surface support of the workpiece

• Robust and solid
• Large wheels and rubberized transport handles
• 8 t splitting force

• Available with 230 V or 400 V drive
• Two-hand safety switch
• Robust and solid construction
• Shock and scratch resistant thanks to high quality powder coating
• Convenient transport with a hand drawbar due to the standard chassis with hard rubber wheels
• Fast, tool-free gap height adjustment
• 400 V phase-reversing model