AIRCRAFT

• Innovative LOGIN control with 4.3" touch screen for easy operation and complete control over all functions
• Connection of up to eight compressors possible, no matter if with constant or variable speed
• All information on current operating status at a glance
• Rotation direction control for the motor, prevents damage during start-up or after a change of location
• Low noise emission (only max. 67 dB) during operation, due to extremely low speed of the screw compressor and use of a low-noise radial fan
• Optimum operating temperature and low fluctuation of oil temperature due to thermostatically controlled centrifugal fan, optimum cooling air flow and generously dimensioned heat exchangers
• Aftercooler reduces the effort for drying and filtration of the generated compressed air
• Star-delta switching as standard
• Easy to service: simple removal and installation of all components requiring maintenance

• Compressed air tank according to AD 2000 / without fitting set / 11 and 16 bar
• Hot dip galvanized inside and outside
• Constructed in accordance with EC Directive 87/404 / EEC or PED 97/23 / EC -AD 2000, Module: H / H 1
• Operating conditions according to AD 2000 - S1 (10/2000) = arrivals and departures and 20% pressure fluctuation range
• ISO 9001:2015 certified manufacturer

Special

• Drying by partial vapor pressure compensation of water vapor by diffusion in combination with a highly selective membrane
• No change in the compressed air composition - can be used for breathing air treatment

Efficient

• Reaches the required pressure dew point with low energy consumption
• Very fast availability of dried compressed air
• Filtration and drying compact in one device

Robust

• Housing made of seawater-resistant aluminum
• Low-maintenance, currentless technology

System-compatible

• Modularly combinable with CLEARPOINT Filter program
• Can be used anywhere along the compressed air treatment chain - can also be integrated into system technology

• The ultimate membrane dryer technology with integrated nanofilter
• Filtration and drying in one housing (simple filter element change)
• Low purge air requirement (Twist 60 technology)
• Availability of dried compressed air immediately without running-in phase
• Safe drying due to the high partial vapor pressure gradient
• No change in the compressed air temperature and composition
• Proven 100,000 times
• Maintenance-free (except filter element change)
• For diverse applications, including for breathing air treatment
• Also ideal for use directly behind the compressor / aftercooler
• Optionally also for higher loads (assembly potting, 16 bar, 70°C)
• For a reliable function of the DRYPOINT M membrane dryer must meet the following requirements:
1. The incoming compressed air must not contain any liquid condensate
2. Particles larger than 1 μm must be separated before the membrane dryer
3. The oil content of the compressed air must not exceed 0.01 mg/m³.

• DRYPOINT M membrane dryers have been an alternative to existing ones for years Compressed air drying process proven.

Advantages DRYPOINT M PLUS

• Proven process of highest reliability and functional safety
• Immediate availability of dry compressed air, even when working discontinuously
• Low purge air requirement, compressed air drying can be adjusted to the application
• Compact and robust, small space requirement due to low overall height
• Compressed air inlet and outlet on one level (filter version), easy to combine with CLEARPOINT filters
• Maintenance and wear-free as there are no moving parts
• No reduction in the oxygen content, therefore also suitable for breathing air treatment
• No electrical connection, also suitable for Ex areas
• Long service life in case of use of CLEARPOINT filters
• Environmentally friendly, does not require CFCs / CFC-containing refrigerants or adsorbents
• Complete solution: filtration and dryer in a compact form, integration of drain pipe
• Filtration at the point in the treatment chain where the highest efficiency is achieved
• Easy maintenance / replacement of filter element as with a regular filter

Filter element: N (nanofilter)

• The CLEARPOINT filter element type N is used to separate solid particles down to 0.01 micron, water and oil aerosols . The element has a multi-stage structure for efficient and long-lasting filtering. In the first stage, coarse particles are retained by a pre-filter layer. In the second stage, finer particles are absorbed by a depth filter bed made of high-performance borosilicate fiber fabric. Due to the very large cavity volume of the filter medium (96%), a very high dirt holding capacity is achieved. The filter medium is specially impregnated in order to avoid cross-sectional swelling of the individual fibers.

Trap: Float trap

• The basic version includes a float drain.

Size 10 - 40

• This size is for the demand-oriented compressed air drying of medium volume flows configured. Different levels of drying of the compressed air are achieved through different purge air settings.

• 99% separation of the precipitated condensate directly after the compressor
• For separating large amounts of condensate (water, oil) and dirt particles by centrifugal acceleration of the compressed air
• Use on aftercoolers and refrigeration dryers
• High quality corrosion protection through complete anodization
• Low-flow housing made of seawater-resistant aluminum
• Outside additionally powder-coated
• Differential pressure < 0.06 bar
• With BEKOMAT® steam trap

• Maximum, robust equipment and best quality at a reasonable price
• Fully automatic on-off operation
• With all safety devices
• Completely ready for connection

Quality electric motor

• Quality electric motor with high starting torque is equipped with a motor protection switch
• Starting capacitor and starting relief valve ensure easy starting
• Phase inverter as standard for easy manual reversal of the direction of rotation

Compressed air compression via high-performance HOS unit

• The start-up relief valve ensures easy and pressureless start-up
• The two-cylinder high-performance unit made of gray cast iron and the low speed warranty particularly quiet and low-vibration running and a long service life
• This ensures an even longer service life due to even less wear and tear
• High-quality compressor with optimum lubrication for a long service life and high reliability
• Equipped with high quality intake filter
• The aftercooler with large cooling fins ensures a low boiler inlet temperature and thus less moisture in the compressed air, which protects the air tools
• Additional intercooler to the aftercooler
• Corrosion-free valve plates for improved heat dissipation and compressor longevity
• The large fan impeller and a cooling air baffle on the cylinder ensure optimum cooling of the compressor
• A sturdy metal belt guard ensures optimum protection of the components and a high level of user safety
• Compressed air supply to the boiler via flexible armored hose line with heat protection prevents vibration breakage

High quality drive belt

• Powerful and economical drive
• The toothed drive belt facilitates start-up, improves running smoothness and power transmission and reduces power consumption by up to 30%.
• Sturdy metal belt guard

Comfort safety coupling - The advantages.

• Comfort safety couplings from AIRCRAFT as the first manufacturer to be used in series production
• Two separate locking systems for maximum working safety
• Dangerous whipping of the hose line is prevented

Comfortable and safe to transport and set up

• Ergonomically extended handle for comfortable transport in an almost upright position - strain on the back due to lifting is avoided
• Puncture-proof PU foam wheels and stable steering chassis with parking brake allow easy transport
• The parking brake prevents both turning and rolling movement of the wheels and ensures optimal standing of the compressor
• Practical second transport handle on the boiler, which facilitates carrying the compressor

High quality boiler with durable rust protection

• AIRCRAFT is the first manufacturer to equip the AIRPROFI series compressors with hot-dip galvanized tanks inside and outside as standard
• AIRPROFI series boilers therefore come with a 15-year warranty against rust-through.

• Maximum mechanical efficiency
• No more drive parts required
• Reduction of moving components

• Top-efficient cooling air flow
• Special, ground valves made of stainless steel.

• Suitable for compressed air with full free passage
• Temperature resistant from -20 ° C to + 180 ° C

• Innovative LOGIN control with 4.3" touch screen for easy operation and full control of all functions.
• Rotation direction control for the motor, prevents damage during start-up or after a change of location
• High cooling effect and low noise level due to thermostatically controlled radial fan
• Optimum operating temperature and low fluctuation of oil temperature due to thermostatically controlled centrifugal fan, optimum cooling air flow and generously dimensioned heat exchangers
• Aftercooler reduces the effort for drying and filtration of the generated compressed air
• Easy to service: simple removal and installation of all components requiring maintenance

• Larger speed/load range
• Larger delivery volume supply range
• Extremely energy efficient - up to 50% energy consumption savings compared to a "fixed speed" model
• Very quiet operation - only 64 dB

• Ideal for frequently changing compressed air consumption
• Compressor delivery rate adjusts to actual consumption
• Electronic control monitors motor and compressor speed and keeps line pressure constant even when consumption fluctuates widely
• Advanced and efficient cutting-edge technology in the smallest possible space

• User-friendly operating concept
• Efficient construction for cost-effective and safe operation
• Cooling fan from 0 - 100% speed controlled, this eliminates the usual pressure switch and the thermostat for the fan control
• Less wearing parts with constant pressure dew point
• Control displays five different alarm conditions and keeps them in memory
• Refrigerant compressor switches off below 15 ° ambient temperature, if no compressed air flows through
• Clarity and good accessibility of all components to be serviced
• With built-in automatic steam trap

• High profitability
• Excellent price-performance ratio
• No unnecessary compressed air losses due to integrated electronic steam trap
• Connected tools and machines are optimally protected
• User-friendly operating concept

• Quiet-running, oil-free coaxial V-unit
• Compressor design with movable piston on connecting rod for high efficiency and long service life
• Very smooth running and extremely quiet
• Long service life due to low speed
• Air flows directly through the cylinder for effective cooling
• Highly efficient cooling air fan
• Front and auxiliary cooling for maximum durability
• Quality electric motor with high starting torque
• Electric motor equipped with motor protection switch
• Fifteen-year warranty against rust-through on inside and outside hot-dip galvanized air reservoir
• Tank according to AD 2000
• With high quality CONDOR pressure switch
• Flexible armored hose with heat protection prevents vibration breakage
• Ready for connection with all fittings

• Suitable for compressed air with full free passage
• Temperature resistant from -20 ° C to + 180 ° C

• Cylinders and cylinder heads with long ribs for optimum heat dissipation;
• carefully balanced crankshaft made of cast iron for better concentricity
• Stainless steel valves with high air flow
• Pulley designed as a fan
• Optimized airflow, high fan performance
• Highly efficient air filter with labyrinth intake channel for noise reduction

• Ideal in combination with prefabricated solutions
• Permanently sealed without pressing
• Installation even in confined spaces
• Detachable fittings can be reused
• Cost savings through quick assembly

• Permanently sealed without pressing
• Cost savings through quick and easy assembly
• Ideal in combination with prefabricated solutions
• Compatible with other standards-compliant pipes
• No confusion of contours possible
• Installation even in confined spaces
• Extraction forces far beyond the requirements of the standard
• Pipe components can be dismantled and reused
• Numerous national and international approvals
• O-rings included

• All main components of the compressor are manufactured by machining using numerically controlled machine tools, including suction regulator, separator block and minimum pressure valve
• The cooling takes place via a temperature-controlled centrifugal fan and an oversized combination cooler. This ensures optimal cooling even under the most extreme conditions.
• Generous access panels allow easy maintenance and immediate control of the internal components, reducing the time required for inspection and maintenance to one medium.
• The main operating parameters are monitored by the electronic microprocessor control NRG: In addition to the various functions, a weekly timer for switching on and off is available to meet the requirements of each customer. In addition, up to 4 machines can be controlled simultaneously according to the master / slave principle.
• Standard with star-delta connection

• Maximum mechanical efficiency
• No more drive parts required
• Reduction of moving components

• Top-efficient cooling air flow
• Special, ground valves made of stainless steel.

• Very smooth inner surfaces, better flow
• well proven for years
• pressure and temperature resistant
• vibration and impact resistant
• resistant to corrosion and aging
• low weight

operating temperatur

• with continuous load: -60 ° C to +100 ° C (air)

• Density, at 20 ° C: 1.04 g / cm
• linear expansion coefficient: 15 · 10-5 l / K
• Melting point: approx. + 160 ° C to + 170 ° C

• The two-stage compression 2-cylinder high-performance unit enables a very low speed, resulting in a particularly quiet and low-vibration run.
• The large fan ensures optimal cooling.
• Intercooler and aftercooler ensure a low container inlet temperature and thus reduce condensation.
• High quality electric motor with high torque
• Electric motor equipped with motor protection switch
• Fifteen-year rust-proofing warranty on inside and outside hot-dip galvanized tanks
• 200, 270 and 500 liter containers according to AD 2000
• With high-quality CONDOR pressure switch
• Flexible armored hose line with heat protection prevents vibration breakage
• Star-delta switch with operating hours counter from 7.5 kW models
• High quality finned intake filter from Airprofi 1003/500/10 H
• Ready for connection with all fittings

Recommended accessories:

• For oil-water separation
• Important notes on condensate treatment in the section on compressed air preparation

• For separating condensate and solid impurities with particles up to 1 μm
• Compressed air quality according to ISO 8573-1
• As a pre-filter in front of the refrigeration dryer

• At the compressed air tank
• No unnecessary pressure loss during condensate drainage

• With integrated automatic steam trap
• Pressure dew point at 5 ° C, ambient temperature 25 ° C, atmospheric dew point at -22 ° C