Фильтры
Сортировать по
позиции
названию: от А до Я
названию: от Я до А
цене: по возрастанию
цене: по убыванию
Дата создания
артикул: от А до Я
артикул: от Я до А
Показать по
12
20
24
100
на странице
Сравнить
Добавить в список пожеланий
51-5822105
Electrically movable bench bed extension via cylinder to a center width of up to 1016 mm Extremely high center height of up to 397 mm, workpieces of up to 790 mm diameter possible ASR run-off protection groove for maximum safety when fastening clamping devices Comfortable working thanks to infinitely variable speed adjustment via frequency converter Practical 36-step spindle part adjustment for precise positioning of e.g. drill holes or milled holes Solid gray cast iron bench bed for smooth running Electrically movable bench bed extension via cylinder to a center width of up to 1016 mm Extremely high center height of up to 397 mm, workpieces of up to 794 mm diameter possible ASR run-off protection groove for maximum safety when fastening clamping devices Comfortable working thanks to infinitely variable speed adjustment via frequency inverter Frequency inverter for better power development at low speeds Robust tailstock with trapezoidal thread and 120 mm quill travel Flexible working thanks to mobile control box with magnetic holder, can be positioned as required Digital speed display and right/left rotation changeover via the control box Practical 36-step spindle indexing device for precise positioning of e.g. drill holes or milling operations Manufacturer Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de
Сравнить
Добавить в список пожеланий
51-5903565
Infinitely variable adjustment of the feed and the cylindrical grinding roller speed via potentiometer Easy height adjustment via crank Easy replacement of the sandpaper Closed substructure Speed of the cylindrical sanding roller infinitely adjustable via potentiometer Feed speed infinitely adjustable via potentiometer Stable construction for high sanding accuracy Table extension at the infeed and outfeed Simple height adjustment of the sanding unit via crank handle Lateral sanding head holder removable for processing of wider workpieces Easy replacement of the sanding paper Closed base with cabinet system and storage compartment Manufacturer Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de
Сравнить
Добавить в список пожеланий
51-5506030
Fast tape tension via lever Upper band support with graphite coating 250 mm balanced belt rollers ensure optimum drive. With electric height adjustment With extraction and noise protection With noise protection certificate At two speeds Fits to surfaces through a swiveling sanding pad Beveled surfaces Standard with right and left rotation The fast belt tension allows quick and easy changing of the sanding belts. Delivery partially pre-assembled Manufacturer SCM Group S.p.A Div. MINIMAX
Via Casale 450, 47826 Villa Verucchio (RN), Italy
minimax@scmgroup.com
Сравнить
Добавить в список пожеланий
51-5133110
Universally applicable also for plastic, metal, glass, styrofoam, paper and the like Particularly robust construction Housing made of galvanized sheet steel Paddle wheel fan for increased suction power Significantly reduced dust content due to double-woven fine filter bag Extractors comply with dust class L Basic units are pre-assembled in modular design For large systems only short installation times Top value for money Short assembly times thanks to modular design Manufacturer Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de
Сравнить
Добавить в список пожеланий
51-5390150
Separate work table for solid wood and veneer sanding, manually swivelable by 45° and 35° respectively The stop for veneer sanding can be adjusted to an accuracy of 0.1 mm Motorized height-adjustable sanding unit Additional table with suction openings for sanding radii on the rubberized deflection roller Sanding sleeve device with attachable work table The machine stand made of welded steel guarantees high torsional rigidity and vibration-free working Oscillating sanding belt with separate geared motor for better sanding results Oscillation can be switched on as required Abrasion-resistant and highly gliding plastic tracks on the work table surface Sanding pad with graphite coating for a longer service life of the sanding belt The spring-loaded belt tension automatically compensates for belt length differences Rubberized and grooved sanding drum Convenient operation from two sides on the rotating control panel above the machine Centrally positioned holder for feed unit Manufacturer Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de
Сравнить
Добавить в список пожеланий
51-5132110
Dust tested to H3, residual dust content less than 0.1 mg / m³ Suitable for vacuuming and separating dry wood and plastic chips High extraction capacity with a small footprint Maximum performance in this class Very quiet All models with a collision protection Application
Designed for commercial use For all woodworking machines with corresponding extraction nozzle diameter High-quality, well thought-out construction
Robust and compact housing made of galvanized sheet steel Extraction nozzle easily convertible from left to right, thus flexible use Large inspection openings Large-sized, mobile chip container with clamp and chip collecting bag Dust remover at delivery already completely assembled, thus quick to use All models mobile For model RLA 210: Optimum chip distribution in the chip containers due to large filter surface Description of the filter
Ultra compact with maximum filter surface Filter material made of polyester fleece, aluminised, therefore with long service life Standard anti-static filter tested and approved according to M-BIA category <The fan is connected downstream of the filter Maximum safety, thanks to antistatic filter elements Manufacturer Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de
Сравнить
Добавить в список пожеланий
51-5120141
For milling, planing and sawdust (no dust) Significantly reduced dust content by BIA-tested filter material with a high degree of separation Housing parts and impellers made of high-strength special plastic Quick-release fasteners for filters and chip bags for trouble-free maintenance Robust, high-quality execution Easy to move through castors Low energy consumption Extractors comply with dust class L Optional accessories
Fine dust filter cartridge with specially treated polyester fleece Retains finest particles High airflow, large filter surface Higher tear resistance and therefore longer service life Manufacturer Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de
Сравнить
Добавить в список пожеланий
51-5131401
Dust tested to H3, residual dust content less than 0.1 mg / m³ Suitable for vacuuming and separating dry wood and plastic chips High extraction capacity with a small footprint Maximum performance in this class Very quiet All models with a collision protection Application
Designed for commercial use For all woodworking machines with corresponding extraction nozzle diameter High-quality, well thought-out construction
Robust and compact housing made of galvanized sheet steel Extraction nozzle easily convertible from left to right, thus flexible use Large inspection openings Large-sized, mobile chip container with clamp and chip collecting bag Dust remover at delivery already completely assembled, thus quick to use All models mobile For model RLA 210: Optimum chip distribution in the chip containers due to large filter surface Description of the filter
Ultra compact with maximum filter surface Filter material made of polyester fleece, aluminised, therefore with long service life Standard anti-static filter tested and approved according to M-BIA category The fan is connected downstream of the filter Manufacturer Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de
Сравнить
Добавить в список пожеланий
51-5903510
Powerful 450 watt motor Variable speed adjustment for processing a wide range of materials Compact and lightweight design Swivel work table infinitely adjustable from 0° to 45° - fixed angle settings at 0° / 15° / 22.5° / 30° / 45°) Safe and clean working thanks to integrated extraction nozzle for connecting an external extraction unit Powerful 300 watt motor - For powerful, reliable work even with demanding materials Variable speed adjustment for processing a wide range of materials Compact and lightweight design - Easy to transport, convenient to store - ideal for the workshop and on the go Maximum precision and stability, even with larger workpieces, thanks to large and solid cast iron table Swivel work table infinitely adjustable from 0° to 45° - fixed angle steps at 0° / 15°/ 22.5°/ 30° /45°) Easy sanding belt change thanks to quick-release system Safe and clean working thanks to integrated suction nozzle for connecting an external suction unit Practical storage option for accessories and assembly tools Manufacturer Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de
Сравнить
Добавить в список пожеланий
51-5131256
Dust tested to H3, residual dust content less than 0.1 mg / m³ Suitable for vacuuming and separating dry wood and plastic chips High extraction capacity with a small footprint Maximum performance in this class Very quiet All models with a collision protection Application
Designed for commercial use For all woodworking machines with corresponding extraction nozzle diameter High-quality, well thought-out construction
Robust and compact housing made of galvanized sheet steel Extraction nozzle easily convertible from left to right, thus flexible use Large inspection openings Large-sized, mobile chip container with clamp and chip collecting bag Dust remover at delivery already completely assembled, thus quick to use All models mobile For model RLA 210: Optimum chip distribution in the chip containers due to large filter surface Description of the filter
Ultra compact with maximum filter surface Filter material made of polyester fleece, aluminised, therefore with long service life Standard anti-static filter tested and approved according to M-BIA category The fan is connected downstream of the filter Maximum safety, thanks to antistatic filter elements Manufacturer Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de
Сравнить
Добавить в список пожеланий
51-5120163
For milling, planing and sawdust (no dust) Significantly reduced dust content by BIA-tested filter material with a high degree of separation Housing parts and impellers made of high-strength special plastic Quick-release fasteners for filters and chip bags for trouble-free maintenance Robust, high-quality execution Easy to move through castors Low energy consumption Extractors comply with dust class L Optional accessories
Fine dust filter cartridge with specially treated polyester fleece Retains finest particles High airflow, large filter surface Higher tear resistance and therefore longer service life Manufacturer Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de
Сравнить
Добавить в список пожеланий
51-5131257
Dust tested to H3, residual dust content less than 0.1 mg / m³ Suitable for vacuuming and separating dry wood and plastic chips High extraction capacity with a small footprint Maximum performance in this class Very quiet All models with a collision protection Application
Designed for commercial use For all woodworking machines with corresponding extraction nozzle diameter High-quality, well thought-out construction
Robust and compact housing made of galvanized sheet steel Extraction nozzle easily convertible from left to right, thus flexible use Large inspection openings Large-sized, mobile chip container with clamp and chip collecting bag Dust remover at delivery already completely assembled, thus quick to use All models mobile For model RLA 210: Optimum chip distribution in the chip containers due to large filter surface Description of the filter
Ultra compact with maximum filter surface Filter material made of polyester fleece, aluminised, therefore with long service life Standard anti-static filter tested and approved according to M-BIA category The fan is connected downstream of the filter Maximum safety, thanks to antistatic filter elements Manufacturer Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de
Сравнить
Добавить в список пожеланий
51-5903450
Infinitely adjustable feed speed for perfect sanding results on various materials Open design on one side for sanding even wider workpieces Integrated dust extraction for dust-free work Precise height adjustment and clamping via handwheel Infinitely adjustable speed of the feed carpet for perfect sanding results with a wide range of materials Open design on one side - also allows sanding of wider workpieces Practical rollers on the top of the machine serve as a clipboard and facilitate the handling of workpieces Integrated dust extraction for dust-free work Precise height adjustment and clamping via handwheel Mobile base with parking brake for easy maneuvering in the workshop Manufacturer
Сравнить
Добавить в список пожеланий
51-5924134
Clean exhaust air thanks to separation of dust in the cyclone separator and cartridge filter Manual filter cleaning by rotary crank for consistently high extraction power Manual filter cleaning by rotary crank for consistently high extraction power Effective cyclone technology with 2-stage filtration Separation of larger impurities in the waste container and fine dust in the cartridge filter Sight glass for checking the fill level in the container Manual filter cleaning via rotary crank for consistently high extraction performance Flexible maneuvering thanks to swivel castors on the extraction unit and filling container Easy emptying of the mobile filling container thanks to quick-release fastener Manufacturer Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de
Сравнить
Добавить в список пожеланий
51-5920305
Machine bed made of torsion-free grey cast iron for smooth running and great precision Spindle with excellent concentricity Variably adjustable speed range Simple fixation of the tailstock using quick-release lever Infinitely variable speed range 750-3200 rpm Machine bed made of torsion-resistant grey cast iron for high running smoothness and precision Tailstock and headstock made of sturdy grey cast iron Spindle with high concentricity Headstock quill with through hole for machining long workpieces Simple fixing of the tailstock via quick-release lever Turning steel support easily adjustable Manufacturer Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de
Сравнить
Добавить в список пожеланий
51-5132011
For use in workshops with a simultaneity factor of 1-2 machines, from RLA 2501 2-3 machines (depending on the required volume flow) or as a decentralized extraction system to supplement an already existing stationary system. For universal use with various materials - also suitable for dry aluminum chips! 100% air recirculation without additional costs and constructional effort Delivery ready for connection High suction capacity Low costs for pipe components and installation, especially when replacing old and no longer approved systems Integrated pre-separation chamber to reduce the load and protect the filters Compact dimensions, allowing the units to be installed in previously unused areas Suction side can be ordered with orientation to the left or right, thus also possible use of workshop niches Control system expandable by plug-in technology From model RLA 2501 P :Optimal filter cleaning after added time after switch-offwith Manufacturer Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de
Сравнить
Добавить в список пожеланий
51-5363000
sanding unit can be swiveled up to 45 ° via lever The machine stand made of welded steel guarantees high torsional rigidity and vibration-free working. Oscillating sanding belt with separate gear motor for better sanding results Oscillation optionally switchable sanding sole with graphite coating for a longer service life of the sanding belt Height-adjustable sanding table for utilization of the entire sanding belt width Height-adjustable additional table with suction for sanding radii The spring-loaded belt tension independently compensates for belt length differences. With double suction Extendable roller table extension With rubberized sanding roller Veneer edge sanding device with contact shoe with fine adjustment, unloading rollers and stop rulers With grooved feed ruler for veneer projections Quick change from veneer edging to solid wood sanding possible equipment detail
Unit swivel via handwheel from 90 - 45 ° KSO 150 F equipped as standard with a sturdy console as preparation for mounting a feed unit Feed unit not included Manufacturer Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de
Сравнить
Добавить в список пожеланий
51-5801300
Ideal for the production of frames, windows and doors thanks to horizontal and vertical pressing units Frame pressing device with two horizontal manual hydraulic pressing units Horizontal and vertical adjustment of the manual hydraulic pressing units possible Three manual hydraulic pressing units with ergonomic handle and comfort adjustment 5-position adjustable lower support with fail-safe device in the hole pattern Ideal for the production of frames, windows and doors thanks to horizontal and vertical pressing units Torsion-resistant base frame made of sturdy welded frame construction with thick-walled profile tubes and laser-machined steel parts Three vertical pressure beams with roller bearings made of solid profile tubes, galvanized Frame pressing device with two horizontal manual hydraulic pressing units Horizontal and vertical adjustment of the manual hydraulic pressing units possible Three manual hydraulic pressing units with ergonomic handle and comfort adjustment Lower support with fail-safe device, 5-position adjustable in the hole pattern Powder-coated and glue-repellent frame components Manufacturer Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de
Сравнить
Добавить в список пожеланий
51-5924135
Clean exhaust air due to separation of dust in the cyclone separator and cartridge filter Manual filter cleaning via rotary crank for consistently high suction power Easy emptying of the mobile container Effective cyclone technology with 2-stage filtration Separation of larger impurities in the waste container and fine dust in the cartridge filter Sight glass for checking the fill level in the container Manual filter cleaning via rotary crank for consistently high extraction performance Flexible maneuvering thanks to swivel castors on the extraction unit and filling container Easy emptying of the mobile filling container thanks to quick-release fastener Manufacturer Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de
Сравнить
Добавить в список пожеланий
51-5132100
Dust tested to H3, residual dust content less than 0.1 mg / m³ Suitable for vacuuming and separating dry wood and plastic chips High extraction capacity with a small footprint Maximum performance in this class Very quiet All models with a collision protection Application
Designed for commercial use For all woodworking machines with corresponding extraction nozzle diameter High-quality, well thought-out construction
Robust and compact housing made of galvanized sheet steel Extraction nozzle easily convertible from left to right, thus flexible use Large inspection openings Large-sized, mobile chip container with clamp and chip collecting bag Dust remover at delivery already completely assembled, thus quick to use All models mobile For model RLA 210: Optimum chip distribution in the chip containers due to large filter surface Description of the filter
Ultra compact with maximum filter surface Filter material made of polyester fleece, aluminised, therefore with long service life Standard anti-static filter tested and approved according to M-BIA category The fan is connected downstream of the filter Maximum safety, thanks to antistatic filter elements Manufacturer Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de
