Accessories

Welding materials and accessories

Soldering and gas accessories

View as Grid List

Sort by

Display per page

SDS Max flat chisel 25 x 18 x 600 mm

02-55T104

The SDS Max 25 x 18 x 600 mm 55T104 flat chisel by GRAPHITE is a tool for working in concrete, fitted with an SDS Max chuck. It features a diameter of 18 mm, an overall length of 600 mm, a working part width of 25 mm and a working part length of 25 mm. It will be invaluable in any DIYer's toolbox.

10.40€

On request

SDS Max flat chisel 25 x 18 x 280 mm

02-55T102

The SDS Max 25 x 18 x 280 mm 55T102 flat chisel by GRAPHITE is a tool for working in concrete, fitted with an SDS Max chuck. It features a diameter of 18 mm, an overall length of 280 mm, a working part width of 25 mm and a working part length of 25 mm. It will be invaluable in any DIYer's toolbox.

5.10€

On request

Velcro sanding paper, rectangular 80 x 130 mm, P120, 5 pcs, with 8 holes for 04-623

03-54051

Velcro-mounted sanding papers, rectangle 80 x 130 mm, P120, 5 pieces, with 8 holes for 04-623, 54-051 by NEO TOOLS is a set of 5 pieces of papers recommended for the 04-623 NEO TOOLS orbital sander. The sanding papers are mounted with practical Velcro and contain 8 holes. They will work well with wood, metal, plastic and plasterboard. They are characterised by a gradation of P120 and dimensions of 80 x 130 mm. NEO TOOLS sanding papers are recommended for DIY enthusiasts for many projects.

3.00€

On request

SDS Plus point chisel 14 x 250 mm

02-55T108

The SDS Plus 14 x 250 mm 55T108 by GRAPHITE is a pick equipped with an SDS Plus handle with a diameter of 14 mm and an overall length of 250 mm. The tool will perform well when working with concrete. This is a solidly made GRAPHITE pick that will be invaluable in any DIYer's equipment.

3.00€

On request

SDS Max flat chisel 25 x 18 x 400 mm

02-55T103

The SDS Max 25 x 18 x 400 mm flat chisel 55T103 by GRAPHITE is a tool for working in concrete, fitted with an SDS Max chuck. It features a diameter of 18 mm, an overall length of 400 mm, a working part width of 25 mm and a working part length of 25 mm. It will be invaluable in any DIYer's toolbox.

7.20€

On request

Polystyrene cutter 68 mm

02-56T615

The 68mm polystyrene cutter 56T615 by GRAPHITE is a 68mm diameter cutter that has an 8mm hex shank and allows drilling to a depth of 20mm. It is designed to work in polystyrene - especially for masking areas after the installation of thermal insulation studs.

2.41€

On request

Wire wheel brush 150 x 32 mm, crimped wire, brass-plated

02-57T406

The 150 x 32 mm wire wheel brush, twisted wire, brassed 57T406 by GRAPHITE is made of twisted brassed wire. Its maximum speed is 6000 rpm. The product complies with EN 1083-2 and includes reductions: 2 x 12.2 mm (1/2"), 2 x 15.7 mm (5/8"), 2 x 19 mm (3/4"), 2 x 22.2 mm (7/8") and 2 x 25.3 mm (1"). The mount is suitable for use with bench grinders. The GRAPHITE wire brush is a versatile product for a wide range of tasks, including aggressive cleaning and initial roughing.

9.70€

On request

Saw blade, widia, 210 x 30 mm, 40 teeth

02-57T228

Saw blade, widia, 210 x 30 mm, 40 teeth 57T228 by GRAPHITE, with an external diameter of 210 mm and a mounting hole diameter of 30 mm. It has 40 teeth, the cut width is 2.4 mm and the tooth angle is 15°. The maximum speed is 8,000 rpm. It is characterised by a fast cutting type. The blade complies with EN 847-1 and includes 30/25.4 mm, 30/20 mm and 30/16 mm reduction rings. The GRAPHITE brand saw blade is designed for cutting wood and wood-based materials such as plywood, chipboard and MDF. The reduction rings included in the package allow the blade to be used with most saw models.

9.00€

On request

Jigsaw blade, 12 TPI, HSC, T-shaped handle, 2 pcs, curved cut

02-57T543

Jigsaw blade, 12 TPI, HCS, T-handle, 2 pieces, curved cutting 57T543 by GRAPHITE is a jigsaw blade, with a tooth density of 12 TPI, made of HCS and with a T-handle. The set includes 2 pieces. The overall length of the blade is 76 mm, working length 50 mm, width 5.2 mm, thickness 1 mm, tooth spacing 2 mm. Suitable for cutting softwood 2-15 mm thick, chipboard, plywood and fibreboard. The GRAPHITE blade allows for curved and basic cuts.

1.10€

On request

Circular saw blades with HM tips 230 x 30mm, 80 teeth

02-57T229

Saw blade, widia, 230 x 30 mm, 80 teeth 57T229 by GRAPHITE, with an external diameter of 230 mm and a mounting hole diameter of 30 mm. It has 80 teeth, the cut width is 2.4 mm and the tooth angle is 15°. The maximum speed is 7,500 rpm. It is characterised by a fast cutting type. The saw blade complies with EN 847-1 and includes 30/25.4 mm, 30/20 mm and 30/16 mm reduction rings. The GRAPHITE brand saw blade is designed for cutting wood and wood-based materials such as plywood, chipboard and MDF. The reduction rings included in the package allow the blade to be used with most saw models.

10.80€

On request

Blades for reciprocating saw, TPI 5, TPI 6, TPI 18, HCS/BIM, set 10 pcs

02-57T566

Sabre saw blade set, TPI 5, TPI 6, TPI 18, HCS/BIM, 10 piece set 57T566 by GRAPHITE containing 10 pieces and consisting of: 3x 57T563 - GRAPHITE HCS saw blades, 240 mm long, 19 mm wide and 1.5 mm thick, with 5 mm tooth spacing (5 TPI), designed for cutting thick wood without nails (15-190 mm), trimming green wood (diameter <190 mm) and firewood (diameter 15-190 mm); for fast and rough cutting, 4x 57T564 - GRAPHITE HCS saw blades, 152 mm long, 19 mm wide and 1.3 mm thick, with tooth pitch 4 mm (6 TPI), designed for cutting structural timber, plywood, plastics (6-100 mm), wood panels (<75 mm), chipboard and MDF (6-60 mm); for clean curved and plunge cuts, 3x 57T561 - GRAPHITE BIM saw blades, 152 mm long, 19 mm wide and 0.9 mm thick, with 1.4 mm tooth pitch (18 TPI), for thin sheet metal (1.5-4 mm), open and closed tubes and profiles with a diameter of 5-100 mm; offering flexibility and straight cutting.

24.40€

On request

Spiral wood drill, 12 x 230 mm

02-54T553

The spiral wood drill, 12 x 230 mm 54T553 by GRAPHITE is a drill bit designed for working with wood and plywood, featuring a hexagonal chuck, and a spiral design. It features a diameter of 12 mm and a length of 230 mm. Adapted for tasks with a maximum speed of 1500 rpm. Will work well for many DIY tasks.

3.00€

On request

Concrete drill bit 12 x 150 mm, ground

02-56T307

The 12 x 150 mm ground concrete drill bit 56T307 by GRAPHITE is a ground concrete, brick and stone drill bit with a standard cylindrical chuck. It features a diameter of 12 mm, an overall length of 150 mm and a working length of 90 mm. The GRAPHITE drill bit will prove useful in domestic applications.

1.50€

On request

Velcro-backed sanding discs 150 mm, P60, 5 pcs, without holes

02-58T172

Velcro sanding discs 150 mm, P60, 5 pieces, unperforated 58T172 by GRAPHITE are unperforated discs for metal, wood and plastic. Gradation P60 - the sharpest - allows appropriate sanding, according to the needs and the stage of surface preparation. The backing is made of type C paper and is suitable for machine use. The electro-corundum abrasive coating ensures high efficiency, and the Velcro fastening allows GRAPHITE discs to be changed quickly and conveniently.

1.70€

On request

Water sanding paper 230 x 280 mm, P280

02-58T218

Water sandpaper 230 x 280 mm, P280, 58T218 by GRAPHITE is a water-based hand sanding paper. It has a full grain electro-corundum coating, 100% coverage and a flexible C latex backing. It is suitable for wood, metal, paint, plastic, glass and plasterboard. This type of GRAPHITE brand sandpaper has been developed for use with water. Its special surface is coated with an abrasive layer which forms an abrasive paste on contact with the liquid. It makes the sanding process more efficient. The water also prevents the accumulation of dust, keeping the surface clean and increasing the efficiency of sanding. Working with wet sandpaper also minimises the risk of damage to the surface. The GRAPHITE brand is recommended for DIY enthusiasts.

0.298€

On request

Jigsaw blade, 14 TPI, BIM, T-shaped handle, 2 pcs, clean cut

02-57T550

Jigsaw blade, 15 TPI, BIM, T-handle, 2 pieces, clean cut 57T550 by GRAPHITE is a jigsaw blade with 15 TPI tooth density, made of BIM and fitted with a T-handle. The set includes 2 pieces. It has an overall length of 100 mm, a working length of 74 mm, a width of 8 mm, a thickness of 1.27 mm and a tooth spacing of 1.7 mm. Suitable for cutting hardwood, laminate or plasterboard (<30 mm) The GRAPHITE brand blade enables clean cutting.

3.91€

On request

Tungsten hole cutter 53 mm

02-56T740

GRAPHITE's 53mm 56T740 tungsten tipped hole saw is designed for use in brick, hollow block, cellular concrete, plasterboard and lightweight building materials. It has a height of 68mm and provides a drilling depth of 57mm. The cutting edge of the hole saw is coated with a tungsten carbide coating and has a maximum speed of 1,200 rpm. The tool is designed for use with the 56T744 tungsten carbide hole saw blade and 56T745 pilot drill. It can be used for any installation work, such as fitting power sockets, distribution boxes or pipes. It can also be used for cable conduit pipes, ventilation pipes or installation fans in the kitchen or bathroom.

6.89€

On request

Wire wheel brush 80 mm, crimped wire, brass-plated, with 6 mm shank

02-57T405

The 80 mm wire wheel brush, crimped wire, brassed with 6 mm shank 57T405 by GRAPHITE is made of crimped brassed wire. Its maximum speed is 4,500 rpm. The product meets the requirements of EN 1083-2 and comes with a 6mm shank, allowing it to work with any drill or screwdriver. The GRAPHITE wire brush is a versatile product for many tasks.

1.70€

On request

SDS Plus concrete drill bit with double helix 8 x 210 mm

02-56T110

The SDS Plus Concrete Drill with Double Spiral 8 x 210 mm 56T110 by GRAPHITE is a concrete, brick and stone drill bit with double spiral and SDS Plus chuck. It features a diameter of 8 mm and an overall length of 210 mm and a working length of 140 mm. It will prove useful for many tasks around the home and in the workshop.

1.60€

On request

Multifunction saw blade, plunge-cutting, BIM Co 8%, 65 mm

02-57T503

The GRAPHITE 57T503 plunge-cutting, BIM Co 8%, 65 mm blade 57T503 is a tool for multifunction machines with a blade width of 65 mm. It is made from bi-metal (BIM) with 8% cobalt (Co8%). The GRAPHITE blade is designed for plunge cutting wood, wood with nails, metal, plastic and plasterboard. It has a tooth pitch of 1.4mm, 18 TPI, a maximum cutting depth of 40mm and a blade thickness of 0.8mm. Recommended for precision work in a wide variety of materials.

5.39€

On request

Accessories

Power tool accessories

Mixing blades

Wire and nylon brushes

Solders

Threading accessories

Gas cartridges

Cutting and grinding discs

Drill bits and router bits

Cutting discs and blades

Turning tools

Chisels and spikes

Holesaws and adapters

Sandpapers

Bits and bits holders

DREMEL accessories

Welding materials and accessories

Soldering and gas accessories