Rubber disc GRAPHITE (ref. no. 55H826), diameter 150 mm, with M14 threaded holder can be used with angle grinders. With wheels of abrasive paper, it allows to sand wood surfaces and grind metal. Hook and loop fastener allows for quick replacement of abrasive discs.
Bit holder, quick release, 1/4", 60 mm 39-337 by NEO TOOLS is a holder in magnetic design, designed to work with screwdriver bits of the same profile. The chuck's design, combining compact length with magnetic bit protection, facilitates precise guidance and reduces the risk of the bit falling out during installation. The ¼" HEX version ensures dimensional compatibility between bit and socket, resulting in secure seating and repeatable work.
Backing pad for fibre discs GRAPHITE (ref. no. 55H860) with diameter 125 mm with M14 threaded holder can be used with angle grinders. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
GRAPHITE's 125 mm x M14, 58T455 Velcro fastening disc has a diameter of 125 mm and an M14 screw chuck. The maximum speed is 12,000 rpm. It is designed for use with angle grinders. It allows sanding of various surfaces using sanding papers with a diameter of 125 mm. The velcro is backed with a flexible foam backing, allowing the sanding discs to be changed quickly.
The 55-930 angle drill socket by NEO TOOLS allows drilling and screwdriving in hard-to-reach places, thanks to its 90° working angle. Equipped with a self-clamping chuck with a range of 0.8-10 mm, it operates at a maximum speed of 500 revolutions per minute. It is driven by a 9.4mm diameter shaft and the cylindrical chuck ensures compatibility with typical drills. An additional side handle improves stability and control of the tool, making it easier to work accurately in corners, around edges and in built-up areas.
The SDS Plus 8 x 260 mm, quatro 54-106 reinforced concrete drill bit by NEO TOOLS is an accessory characterised by a diameter of 8 mm and an overall length of 260 mm and a working length of 190 mm. Equipped with an SDS Plus handle, double helix and QUATRO fork (four cross-set forks), it is ideal for working in reinforced concrete. The cross-cut bit is made of fine-grain carbide. This robust tool from NEO TOOLS is recommended for intensive use by professionals.
Screwdriver bit PH2 x 300 mm, 1/4" Hex 56-578 by NEO TOOLS is a PH2 type bit with a length of 300 mm. Mounted on a ¼" HEX thread. It features high resistance to deformation and is recommended for high frequency work. The component is made from S2 steel. The tip is recommended for POZDIRIV screws and will prove useful in every professional and DIY workshop.
Sabre saw blades 228 x 19 x 0.9 mm, 14 TPI, set of 2 pieces 57-952 by NEO TOOLS are two blades made of BIM, which have 14 TPI and dimensions 228 x 19 x 0.9 mm (tooth spacing 1.8 mm). They are designed for fast cuts in demanding materials: metal, open/closed pipes (10-175 mm diameter) and thick sheet metal (3-8 mm). The flexible design improves guidance control and durability when working with a wide variety of sections.
Impact bits TX10/15/20/25/30/40 x 25 mm, 6 pieces 56-541 by NEO TOOLS type TX10, TX15, TX20, TX25, TX30, TX40 with a length of 25 mm. Equipped with a ¼" HEX handle and recommended for heavy-duty work with high torque, using screwdrivers or impact drivers. The impact bits are made from durable S2 steel. Six pieces are offered in the set - for professionals and DIY enthusiasts.
Sabre saw blade, HCS, 150 x 19 x 1,3 mm, 3 TPI, set of 2 pieces 58-041 by NEO TOOLS is a set of 2 sabre saw blades made of HCS, with 3 TPI toothing and a stroke of 8,5 mm. The tools have dimensions of 150 x 19 x 1.3 mm. They are designed for branches and wood without nails (20-100 mm) - they also work well for cutting fresh wood (diameter <100 mm). The design of the NEO TOOLS blades allows for plunge, coarse and curved cutting, making quick maintenance and carpentry work easier.
Impact bits TX40 x 25 mm, 2 pieces 56-516 by NEO TOOLS type TX40 with a length of 25 mm. Equipped with a ¼" HEX handle and recommended for heavy work with high torque, using screwdrivers or impact drivers. The impact bits are made from durable S2 steel. 2 pieces are offered in the set - for professionals and DIY enthusiasts.
The SDS Plus 8 x 310 mm, quatro 54-107 reinforced concrete drill bit by NEO TOOLS is an accessory characterised by a diameter of 8 mm and an overall length of 310 mm and a working length of 240 mm. Equipped with an SDS Plus handle, double helix and QUATRO fork (four cross-set forks), it is ideal for working in reinforced concrete. The cross-cut bit is made of fine-grain carbide. This robust tool from NEO TOOLS is recommended for intensive use by professionals.
Bi-metal konstruktsioon tagab optimaalse tasakaalu painduvuse ja kulumiskindluse vahel, võimaldades teradel vastu pidada ka intensiivses kasutuses. Tänu optimeeritud hammaste geomeetriale ja muutuvalehammaste sammule on lõige puhas, sujuv ning kontrollitud erineva paksusega metallides – alates õhukesest plekist kuni tugevamate profiilide ja torudeni.
Sanding paper 93 x 230 mm, P120, 5 pcs, with holes 55-751 by NEO TOOLS with dimensions 93 x 230 mm. It is characterised by gradation P120 and has a rectangular shape. The paper is recommended for use with wood, metal and plastic. It has 8 dust extraction holes - each with a diameter of 10 mm, offering comfortable dust-free working and thus more efficient sanding without overheating the material. The set of 5 sanding papers 93 x 230 mm NEO TOOLS is recommended for professionals and experienced DIYers.
Grinding stone set, 10 pieces 56T661 by GRAPHITE contains 10 stones of different shapes for grinding, smoothing and machining materials. The working part is made of electro-corundum and each piece has a shank with a diameter of 6 mm or 3 mm, allowing use in rotary tools. The set is designed to operate at a maximum speed of 8,000 - 26,000 rpm and is used in the machining of metal and plastics. Pink grit - metal application, white grit - plastics and aluminium application, grey grit - plastics and metals application. The different shapes of GRAPHITE stones allow working on both flat surfaces and in hard-to-reach areas.
Sabre saw blades 300 x 19 x 0.9 mm, 14 TPI, set of 2 pieces 57-948 by NEO TOOLS are two saw blades made of BIM material, which have 14 TPI and dimensions 300 x 19 x 0.9 mm (tooth pitch 1.8 mm). They are designed for fast cuts in demanding materials: sheet metal (3-8 mm), pipes and solid profiles 10-250 mm. The flexible design improves guidance control and durability when working with a wide variety of sections.
Sabre saw blades, BIM, set of 3 pieces 58-048 by NEO TOOLS includes three variants selected for different metal work. The first blade is TPI 24, 152 x 19 x 0.9 mm (pitch 1 mm) - designed for thin sheet metal 0.7-3 mm and thin open/closed pipes and profiles (Ø 5-100 mm); it provides straight cuts and is flexible in guidance. The second is TPI 8-18, 152 x 19 x 0.9 mm (stroke 1.4-3.4 mm) - suitable for 1-8 mm sheets and open/closed tubes and profiles (Ø 5-100 mm); works well for straight cutting and fast cutting. The third is TPI 14, 228 x 19 x 0.9 mm (pitch 1.8 mm) - dedicated to 3-8 mm thick sheet metal and tubes and solid profiles (Ø 10-175 mm), offering fast cutting and flexibility. The BIM (bi-metal) design combines a resilient construction with a tough cutting edge.
Grinding stone set, 5 pieces 56T660 by GRAPHITE contains 5 stones of different shapes for grinding, smoothing and machining materials. The working part is made of electro-corundum and each piece has a 6mm diameter shank, allowing use in rotary tools. The set is designed to operate at a maximum speed of 8,000 - 26,000 rpm and is used in metal and plastic machining. Pink grit - metal application, white grit - plastics and aluminium application, grey grit - plastics and metals application. The different shapes of GRAPHITE stones allow working on both flat surfaces and in hard-to-reach areas.
Velcro sanding discs 150 mm, P120, 5 pcs, with 8 holes 55-949 by NEO TOOLS with a diameter of 150 mm and gradation P120. The pack contains five discs. The accessories have 8 practical holes with a diameter of 10 mm, with a diameter between the centres of the holes of 65 mm. Velcro discs from NEO TOOLS are made of type E paper. They are characterised by a half-open grain and grain made of electro-corundum. They will be suitable both for professional use and during DIY tasks, in metal, plastic and wood.
NEO TOOLS' 32 mm diameter bi-metal hole saw 57-912 allows precise drilling of holes with a maximum depth of up to 38 mm. Equipped with teeth with a 6/4 TPI pitch, it is suitable for working with a variety of materials. Maximum speeds are: steel - 275 rpm, copper - 380 rpm, aluminium - 410 rpm, stainless steel - 140 rpm, plastic - 1800 rpm, wood - 2400 rpm. This is a versatile tool for professional and amateur use.
