Cutting discs and blades

Saw blade, widia, 190 x 30 mm, 50 teeth 57T224 by GRAPHITE, with an external diameter of 190 mm and a mounting hole diameter of 30 mm. It has 50 teeth, the cut width is 2 mm and the tooth angle is 15°. The maximum speed is 9,000 rpm. It is characterised by a fast cutting type. The saw blade complies with EN 847-1 and includes 30/25.4 mm, 30/20 mm and 30/16 mm reduction rings. The GRAPHITE brand saw blade is designed for cutting wood and wood-based materials such as plywood, chipboard and MDF. The reduction rings included in the package allow the blade to be used with most saw models.

Saw blade, widia, 315 x 30 mm, 40 teeth 57T234 by GRAPHITE, with an external diameter of 315 mm and a mounting hole diameter of 30 mm. It has 40 teeth, the cut width is 2.8 mm and the tooth angle is 15°. The maximum speed is 5,000 rpm. It is characterised by a fast cutting type. The blade complies with EN 847-1 and includes 30/25.4 mm, 30/20 mm and 30/16 mm reduction rings. The GRAPHITE brand saw blade is designed for cutting wood and wood-based materials such as plywood, chipboard and MDF. The reduction rings included in the package allow the blade to be used with most saw models.

Saw blade, widia, 400 x 30 mm, 40 teeth 57T235 by GRAPHITE, with an outer diameter of 400 mm and a mounting hole diameter of 30 mm. It has 40 teeth, the cut width is 3.4 mm and the tooth angle is 15°. The maximum speed is 4,500 rpm. It is characterised by a fast cutting type. The saw blade complies with EN 847-1 and includes 30/25.4 mm, 30/20 mm and 30/16 mm reduction rings. The GRAPHITE brand saw blade is designed for cutting wood and wood-based materials such as plywood, chipboard and MDF. The reduction rings included in the package allow the blade to be used with most saw models.

Jigsaw blade set, 6 TPI, 10 TPI, HCS, T-handle, 5 pieces 57T551 by GRAPHITE is a set consisting of jigsaw blades with HCS and T-handle, in two types: jigsaw blades 57T548 by GRAPHITE (2 pieces), with toothing density 6 TPI, total length 100 mm, working length: 74 mm, width: 8 mm, thickness: 1.5 mm and tooth spacing: 4 mm. This blade is characterised by its use for softwood, chipboard, plywood, fibreboard (10-45 mm). And also the jigsaw blades 57T549 (3 pieces), with a tooth density of 10 TPI, total length: 100 mm, working length: 74 mm, width: 8 mm, thickness: 1.5 mm and tooth spacing: 2.5 mm. Applications for this model are: softwood, chipboard, carpenter's plywood, fibreboard (3-30 mm), plastic/epoxy (diameter <30 mm). Both GRAPHIE saw blades ensure a clean cut.

Jigsaw blade, 10 TPI, HCS, U-shaped handle, 2 pieces, inverted tooth, clean cut 57T521 by GRAPHITE is a 10 TPI tooth density jigsaw blade, made of HCS and fitted with a U-shaped handle. The set includes 2 pieces. It has an overall length of 100 mm, a working length of 74 mm, a width of 8 mm, a thickness of 1.5 mm and a tooth spacing of 2.5 mm. Suitable for cutting softwood, chipboard, carpenter's plywood, fibreboard 3-30 mm thick and laminated panels. The GRAPHITE brand blade has an inverted tooth for a clean cut.

Saw blade, widia, 160 x 30 mm, 18 teeth 57T208 by GRAPHITE, with an external diameter of 160 mm and a mounting hole diameter of 30 mm. It has 18 teeth, the cut width is 2 mm and the tooth angle is 15°. The maximum speed is 11,100 rpm. It is characterised by a fast cutting type. The saw blade complies with EN 847-1 and includes 30/25.4 mm, 30/20 mm and 30/16 mm reduction rings. The GRAPHITE brand saw blade is designed for cutting wood and wood-based materials such as plywood, chipboard and MDF. The reduction rings included in the package allow the blade to be used with most saw models.

Saw blade, widia, 180 x 30 mm, 24 teeth 57T214 by GRAPHITE, with an external diameter of 180 mm and a mounting hole diameter of 30 mm. It has 24 teeth, the cut width is 2 mm and the tooth angle is 15°. The maximum speed is 10,000 rpm. It is characterised by a fast cutting type. The saw blade complies with EN 847-1 and includes 30/25.4 mm, 30/20 mm and 30/16 mm reduction rings. The GRAPHITE brand saw blade is designed for cutting wood and wood-based materials such as plywood, chipboard and MDF. The reduction rings included in the package allow the blade to be used with most saw models.

Saw blade, widia, 300 x 30 mm, 80 teeth 57T233 by GRAPHITE, with an external diameter of 300 mm and a mounting hole diameter of 30 mm. It has 80 teeth, the cut width is 2.8 mm and the tooth angle is 15°. The maximum speed is 6,000 rpm. It is characterised by a fast cutting type. The blade complies with EN 847-1 and includes 30/25.4 mm, 30/20 mm and 30/16 mm reduction rings. The GRAPHITE brand saw blade is designed for cutting wood and wood-based materials such as plywood, chipboard and MDF. The reduction rings included in the package allow the blade to be used with most saw models.

Saw blade, widia, 185 x 30 mm, 40 teeth 57T219 by GRAPHITE, with an external diameter of 185 mm and a mounting hole diameter of 30 mm. It has 40 teeth, the cut width is 2 mm and the tooth angle is 15°. The maximum speed is 9,500 rpm. It is characterised by a fast cutting type. The saw blade complies with EN 847-1 and includes 30/25.4 mm, 30/20 mm and 30/16 mm reduction rings. The GRAPHITE brand saw blade is designed for cutting wood and wood-based materials such as plywood, chipboard and MDF. The reduction rings included in the package allow the blade to be used with most saw models.

Saw blade, widia, 115 x 22.23 mm, 24 teeth 57T200 by GRAPHITE, with an outer diameter of 115 mm and a mounting hole diameter of 22.23 mm. It has 24 teeth, the cut width is 1.9 mm and the tooth angle is 15°. The maximum speed is 13,500 rpm. Cutting type: high-speed cutting. The blade complies with EN 847-1. 22.23/20 mm and 22.23/16 mm reduction rings are included. Suitable for cutting wood and wood-based materials such as plywood, chipboard and MDF. The reduction rings included in the package allow the blade to be used with most saw models.

Saw blade, widia, 200 x 30 mm, 24 teeth 57T225 by GRAPHITE, with an external diameter of 200 mm and a mounting hole diameter of 30 mm. It has 24 teeth, the cut width is 2.2 mm and the tooth angle is 15°. The maximum speed is 8,500 rpm. It is characterised by a fast cutting type. The saw blade complies with EN 847-1 and includes 30/25.4 mm, 30/20 mm and 30/16 mm reduction rings. The GRAPHITE brand saw blade is designed for cutting wood and wood-based materials such as plywood, chipboard and MDF. The reduction rings included in the package allow the blade to be used with most saw models.

Saw blade, widia, 125 x 22.23 mm, 24 teeth 57T202 by GRAPHITE, with an outer diameter of 125 mm and a mounting hole diameter of 22.23 mm. It has 24 teeth, the cut width is 1.9 mm and the tooth angle is 15°. The maximum speed is 13,000 rpm. It is characterised by a fast cutting type. The blade complies with EN 847-1 and includes 22.23/20 mm and 22.23/16 mm reduction rings. The GRAPHITE brand saw blade is designed for cutting wood and wood-based materials such as plywood, chipboard and MDF. The reduction rings included in the package allow the blade to be used with most saw models.

The saw blade, widia, 215 x 30 mm, 60 teeth, for aluminium 61-194 by NEO TOOLS is equipped with 60 teeth, 2.4 mm x 1.6 mm, made of TCT carbide. The TCG tooth, with its special geometry and wide comb section, guarantees increased load resistance. The NEO TOOLS brand disc in manganese steel MN65 reaches a maximum speed of up to 8,500 rpm. Three rings are included, allowing reduction to dimensions: 30 x 25.4 mm, 30 x 20 mm and 30 x 16 mm. The NEO TOOLS blade is designed for cutting aluminium profiles and other non-ferrous metals. The tool ensures clean and precise work.

Saw blade, widia, 160 x 30 mm, 24 teeth 57T209 by GRAPHITE, with an external diameter of 160 mm and a mounting hole diameter of 30 mm. It has 24 teeth, the cut width is 2 mm and the tooth angle is 15°. The maximum speed is 11,100 rpm. It is characterised by a fast cutting type. The saw blade complies with EN 847-1 and includes 30/25.4 mm, 30/20 mm and 30/16 mm reduction rings. The GRAPHITE brand saw blade is designed for cutting wood and wood-based materials such as plywood, chipboard and MDF. The reduction rings included in the package allow the blade to be used with most saw models.

Saw blade, widia, 190 x 30 mm, 40 teeth 57T223 by GRAPHITE, with an external diameter of 190 mm and a mounting hole diameter of 30 mm. It has 40 teeth, the cut width is 2 mm and the tooth angle is 15°. The maximum speed is 9,000 rpm. It is characterised by a fast cutting type. The saw blade complies with EN 847-1 and includes 30/25.4 mm, 30/20 mm and 30/16 mm reduction rings. The GRAPHITE brand saw blade is designed for cutting wood and wood-based materials such as plywood, chipboard and MDF. The reduction rings included in the package allow the blade to be used with most saw models.

Saw blade, widia, 150 x 30 mm, 30 teeth 57T207 by GRAPHITE, with an external diameter of 150 mm and a mounting hole diameter of 30 mm. It has 30 teeth, the cut width is 2 mm and the tooth angle is 15°. The maximum speed is 11,500 rpm. It is characterised by a fast cutting type. The saw blade complies with EN 847-1 and includes 30/25.4 mm, 30/20 mm and 30/16 mm reduction rings. The GRAPHITE brand saw blade is designed for cutting wood and wood-based materials such as plywood, chipboard and MDF. The reduction rings included in the package allow the blade to be used with most saw models.

Jigsaw blade, 12 TPI, HSS, U-shaped handle, 2 pieces 57T526 by GRAPHITE is a jigsaw blade with a tooth density of 12 TPI, made of HSS and equipped with a U-shaped handle. The set includes 2 pieces. It has an overall length of 76 mm, a working length of 50 mm, a width of 8 mm, a thickness of 1 mm and a tooth spacing of 2 mm. It is designed for work with medium-thick sheet metal (2.5-6 mm). The GRAPHITE brand blade allows for basic cutting.

The GRAPHITE 57T501 plunge-cutting, BIM Co 8%, 44 mm blade 57T501 is a tool for multifunction machines with a blade width of 44 mm. It is made from bi-metal (BIM) with 8% cobalt (Co8%). The GRAPHITE blade is designed for plunge cutting wood, wood with nails, metal, plastic and plasterboard. It has a tooth pitch of 1.4mm, 18 TPI, a maximum cutting depth of 54mm and a blade thickness of 0.8mm. Recommended for precision work in a wide variety of materials.

Jigsaw blade set, 6 TPI, 8 TPI, 10 TPI, 12 TPI, HCS, U-shaped handle, 5 pieces 57T520 by GRAPHITE includes 5 types of blades with different purposes and technical parameters. The set includes, among others, the 57T526 blade - made of high-speed steel (HSS), with a toothing density of 12 TPI, an overall length of 76 mm and a working length of 50 mm, designed for basic metal cutting, including medium-thick metal sheets with a thickness of 2.5-6 mm. Another is the 57T523 - an HCS blade with the same dimensions and toothing, created for cutting softwood (2-15 mm), plywood, chipboard, fibreboard and carpentry, ideal for curved cuts. Model 57T528 is a GRAPHITE brand HCS 6 TPI blade, with an overall length of 100 mm and a working length of 74 mm, designed for fast, coarse cutting of softwood (5-50 mm), plywood, fibreboard and particleboard. Also included is the 57T527 - HCS 8 TPI blade, with similar dimensions, for rough cutting of softwood (4-50 mm), chipboard, carpentry plywood and fibreboard. The last item is 57T525 - HCS 10 TPI, for clean cutting of wood (3-30 mm), chipboard, plywood, fibreboard and plastics and epoxy up to 30 mm in diameter. All GRAPHITE brand blades have a U-shaped handle and are suitable for most popular jigsaws.

Saw blade, widia, 140 x 30 mm, 24 teeth 57T206 by GRAPHITE, with an external diameter of 140 mm and a mounting hole diameter of 30 mm. It has 24 teeth, the cut width is 1.9 mm and the tooth angle is 15°. The maximum speed is 12,000 rpm. It is characterised by a fast cutting type. The saw blade complies with EN 847-1 and includes 30/25.4 mm, 30/20 mm and 30/16 mm reduction rings. The GRAPHITE brand saw blade is designed for cutting wood and wood-based materials such as plywood, chipboard and MDF. The reduction rings included in the package allow the blade to be used with most saw models.