METALLKRAFT - Hammerjack

Core drill HARD-LINE 55 Weldon Ø 125 mm

51-38720.1316125

Core drill optimally suited for:

Steel < 500 N
Steel < 750 N
Steel < 900 N
Steel < 1100 N
Steel < 1400 N
Stainless steel < 900 N
Stainless steel>900 N
Alu < 10% Si
Alu>10% Si
Copper, brass, nickel, tin
Plastics GFK / CFK
cast iron
Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
graphite

Good for:

rails

Properties of the carbide-tipped HARD-LINE core drills:
Pre-Intermediate-trimmer geometry

manufactured in elaborate pre-middle trimmer geometry
Thus: vibration-free, quiet and easy cutting with maximum service life

Conical spiral

Made with conical spiral
Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

Sandvik carbide teeth

Only equipped with Sandvik carbide teeth
NOTE: Only the best carbide is good enough for Karnasch core drills

Suitable for core drills:
Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
Manufacturer
Karnasch
Straße des Friedens 10, 15848 Görsdorf, Germany
www.karnasch.de

540.52€ 599.20€

On request in weeks

Core drill HARD-LINE 55 Universal Ø 38 mm

51-38720.131638

Core drill optimally suited for:

Steel < 500 N
Steel < 750 N
Steel < 900 N
Steel < 1100 N
Steel < 1400 N
Stainless steel < 900 N
Stainless steel>900 N
Alu < 10% Si
Alu>10% Si
Copper, brass, nickel, tin
Plastics GFK / CFK
cast iron
Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
graphite

Good for:

rails

Properties of the carbide-tipped HARD-LINE core drills:
Pre-Intermediate-trimmer geometry

manufactured in elaborate pre-middle trimmer geometry
Thus: vibration-free, quiet and easy cutting with maximum service life

Conical spiral

Made with conical spiral
Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

Sandvik carbide teeth

Only equipped with Sandvik carbide teeth
NOTE: Only the best carbide is good enough for Karnasch core drills

Suitable for core drills:
Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
Manufacturer
Karnasch
Straße des Friedens 10, 15848 Görsdorf, Germany
www.karnasch.de

64.66€ 71.68€

On request in weeks

Core drill HARD-LINE 110 Weldon Ø 110 mm

51-38720.1660110

Core drill optimally suited for:

Steel < 500 N
Steel < 750 N
Steel < 900 N
Steel < 1100 N
Steel < 1400 N
Stainless steel < 900 N
Stainless steel>900 N
Alu < 10% Si
Alu>10% Si
Copper, brass, nickel, tin
Plastics GFK / CFK
cast iron
Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
graphite

Good for:

rails

Properties of the carbide-tipped HARD-LINE core drills:
Pre-Intermediate-trimmer geometry

manufactured in elaborate pre-middle trimmer geometry
Thus: vibration-free, quiet and easy cutting with maximum service life

Conical spiral

Made with conical spiral
Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

Sandvik carbide teeth

Only equipped with Sandvik carbide teeth
NOTE: Only the best carbide is good enough for Karnasch core drills

Suitable for core drills:
Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
Manufacturer
Karnasch
Straße des Friedens 10, 15848 Görsdorf, Germany
www.karnasch.de

543.54€ 602.55€

On request in weeks

Core drill BLUE-LINE PRO 55 Weldon, Ø 20 mm

51-38720.131720

Core drill optimally suited for:

Steel < 500 N
Steel < 750 N
Steel < 900 N
Steel < 1100 N
Stainless steel < 900 N
Stainless steel>900 N
Alu < 10% Si
Alu>10% Si
Copper, brass, nickel, tin
Plastics GFK / CFK
cast iron
Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
rails

Good for:

Steel < 1400 N

Use possible with:

graphite

Characteristics of BLUE-LINE core drills:
ASP powder steel

Made of ASP powder steel for drilling even the most difficult
Materials such as railroad tracks, stainless steels, exotic alloys
Always available where maximum service life is required

Step hardened HSS core drill

Standard hardened HSS core drills in stages
As a result extremely hard tooth tips (68 HRC) and still flexible core drill

Completely sanded from the full material

This fine grinding increases the cutting performance while reducing friction
For more service life

unique and patented Durablue coating

Extreme surface hardness and smoothness
Extreme service life even under less than ideal working conditions such as overhead work, dry drilling, etc

Five cutting geometries

Specially adapted cutting geometries especially for the different diameters and cutting depths

Suitable for core drills:
Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
Manufacturer
Karnasch
Straße des Friedens 10, 15848 Görsdorf, Germany
www.karnasch.de

91.03€ 100.91€

On request in weeks

Core drill HARD-LINE 55 Universal Ø 25 mm

51-38720.131625

Core drill optimally suited for:

Steel < 500 N
Steel < 750 N
Steel < 900 N
Steel < 1100 N
Steel < 1400 N
Stainless steel < 900 N
Stainless steel>900 N
Alu < 10% Si
Alu>10% Si
Copper, brass, nickel, tin
Plastics GFK / CFK
cast iron
Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
graphite

Good for:

rails

Properties of the carbide-tipped HARD-LINE core drills:
Pre-Intermediate-trimmer geometry

manufactured in elaborate pre-middle trimmer geometry
Thus: vibration-free, quiet and easy cutting with maximum service life

Conical spiral

Made with conical spiral
Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

Sandvik carbide teeth

Only equipped with Sandvik carbide teeth
NOTE: Only the best carbide is good enough for Karnasch core drills

Suitable for core drills:
Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
Manufacturer
Karnasch
Straße des Friedens 10, 15848 Görsdorf, Germany
www.karnasch.de

45.36€ 50.29€

On request in weeks

Core drill HARD-LINE 80 Weldon Ø 52 mm

51-38720.165052

Core drill optimally suited for:

Steel < 500 N
Steel < 750 N
Steel < 900 N
Steel < 1100 N
Steel < 1400 N
Stainless steel < 900 N
Stainless steel>900 N
Alu < 10% Si
Alu>10% Si
Copper, brass, nickel, tin
Plastics GFK / CFK
cast iron
Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
graphite

Good for:

rails

Properties of the carbide-tipped HARD-LINE core drills:
Pre-Intermediate-trimmer geometry

manufactured in elaborate pre-middle trimmer geometry
Thus: vibration-free, quiet and easy cutting with maximum service life

Conical spiral

Made with conical spiral
Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

Sandvik carbide teeth

Only equipped with Sandvik carbide teeth
NOTE: Only the best carbide is good enough for Karnasch core drills

Suitable for core drills:
Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
Manufacturer
Karnasch
Straße des Friedens 10, 15848 Görsdorf, Germany
www.karnasch.de

148.71€ 164.86€

On request in weeks

Core drill HARD-LINE 80 Weldon Ø 24 mm

51-38720.165024

Core drill optimally suited for:

Steel < 500 N
Steel < 750 N
Steel < 900 N
Steel < 1100 N
Steel < 1400 N
Stainless steel < 900 N
Stainless steel>900 N
Alu < 10% Si
Alu>10% Si
Copper, brass, nickel, tin
Plastics GFK / CFK
cast iron
Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
graphite

Good for:

rails

Properties of the carbide-tipped HARD-LINE core drills:
Pre-Intermediate-trimmer geometry

manufactured in elaborate pre-middle trimmer geometry
Thus: vibration-free, quiet and easy cutting with maximum service life

Conical spiral

Made with conical spiral
Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

Sandvik carbide teeth

Only equipped with Sandvik carbide teeth
NOTE: Only the best carbide is good enough for Karnasch core drills

Suitable for core drills:
Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
Manufacturer
Karnasch
Straße des Friedens 10, 15848 Görsdorf, Germany
www.karnasch.de

66.89€ 74.15€

On request in weeks

Core drill BLPRO55WLDM36MM

51-38720.131736

Core drill optimally suited for:

Steel < 500 N
Steel < 750 N
Steel < 900 N
Steel < 1100 N
Stainless steel < 900 N
Stainless steel>900 N
Alu < 10% Si
Alu>10% Si
Copper, brass, nickel, tin
Plastics GFK / CFK
cast iron
Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
rails

Good for:

Steel < 1400 N

Use possible with:

graphite

Characteristics of BLUE-LINE core drills:
ASP powder steel

Made of ASP powder steel for drilling even the most difficult
Materials such as railroad tracks, stainless steels, exotic alloys
Always available where maximum service life is required

Step hardened HSS core drill

Standard hardened HSS core drills in stages
As a result extremely hard tooth tips (68 HRC) and still flexible core drill

Completely sanded from the full material

This fine grinding increases the cutting performance while reducing friction
For more service life

unique and patented Durablue coating

Extreme surface hardness and smoothness
Extreme service life even under less than ideal working conditions such as overhead work, dry drilling, etc

Five cutting geometries

Specially adapted cutting geometries especially for the different diameters and cutting depths

Suitable for core drills:
Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
Manufacturer
Karnasch
Straße des Friedens 10, 15848 Görsdorf, Germany
www.karnasch.de

113.97€ 126.34€

On request in weeks

Core drill HARD-LINE 110 Weldon Ø 90 mm

51-38720.166090

Core drill optimally suited for:

Steel < 500 N
Steel < 750 N
Steel < 900 N
Steel < 1100 N
Steel < 1400 N
Stainless steel < 900 N
Stainless steel>900 N
Alu < 10% Si
Alu>10% Si
Copper, brass, nickel, tin
Plastics GFK / CFK
cast iron
Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
graphite

Good for:

rails

Properties of the carbide-tipped HARD-LINE core drills:
Pre-Intermediate-trimmer geometry

manufactured in elaborate pre-middle trimmer geometry
Thus: vibration-free, quiet and easy cutting with maximum service life

Conical spiral

Made with conical spiral
Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

Sandvik carbide teeth

Only equipped with Sandvik carbide teeth
NOTE: Only the best carbide is good enough for Karnasch core drills

Suitable for core drills:
Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
Manufacturer
Karnasch
Straße des Friedens 10, 15848 Görsdorf, Germany
www.karnasch.de

459.59€ 509.49€

On request in weeks

Core drill HARD-LINE 55 Weldon Ø 67 mm

51-38720.131667

Core drill optimally suited for:

Steel < 500 N
Steel < 750 N
Steel < 900 N
Steel < 1100 N
Steel < 1400 N
Stainless steel < 900 N
Stainless steel>900 N
Alu < 10% Si
Alu>10% Si
Copper, brass, nickel, tin
Plastics GFK / CFK
cast iron
Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
graphite

Good for:

rails

Properties of the carbide-tipped HARD-LINE core drills:
Pre-Intermediate-trimmer geometry

manufactured in elaborate pre-middle trimmer geometry
Thus: vibration-free, quiet and easy cutting with maximum service life

Conical spiral

Made with conical spiral
Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

Sandvik carbide teeth

Only equipped with Sandvik carbide teeth
NOTE: Only the best carbide is good enough for Karnasch core drills

Suitable for core drills:
Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
Manufacturer
Karnasch
Straße des Friedens 10, 15848 Görsdorf, Germany
www.karnasch.de

149.73€ 165.98€

On request in weeks

Core drill HARD-LINE 55 Universal Ø 41 mm

51-38720.131641

Core drill optimally suited for:

Steel < 500 N
Steel < 750 N
Steel < 900 N
Steel < 1100 N
Steel < 1400 N
Stainless steel < 900 N
Stainless steel>900 N
Alu < 10% Si
Alu>10% Si
Copper, brass, nickel, tin
Plastics GFK / CFK
cast iron
Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
graphite

Good for:

rails

Properties of the carbide-tipped HARD-LINE core drills:
Pre-Intermediate-trimmer geometry

manufactured in elaborate pre-middle trimmer geometry
Thus: vibration-free, quiet and easy cutting with maximum service life

Conical spiral

Made with conical spiral
Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

Sandvik carbide teeth

Only equipped with Sandvik carbide teeth
NOTE: Only the best carbide is good enough for Karnasch core drills

Suitable for core drills:
Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
Manufacturer
Karnasch
Straße des Friedens 10, 15848 Görsdorf, Germany
www.karnasch.de

77.89€ 86.34€

On request in weeks

Core drill HARD-LINE 80 Weldon Ø 110 mm

51-38720.1650110

Core drill optimally suited for:

Steel < 500 N
Steel < 750 N
Steel < 900 N
Steel < 1100 N
Steel < 1400 N
Stainless steel < 900 N
Stainless steel>900 N
Alu < 10% Si
Alu>10% Si
Copper, brass, nickel, tin
Plastics GFK / CFK
cast iron
Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
graphite

Good for:

rails

Properties of the carbide-tipped HARD-LINE core drills:
Pre-Intermediate-trimmer geometry

manufactured in elaborate pre-middle trimmer geometry
Thus: vibration-free, quiet and easy cutting with maximum service life

Conical spiral

Made with conical spiral
Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

Sandvik carbide teeth

Only equipped with Sandvik carbide teeth
NOTE: Only the best carbide is good enough for Karnasch core drills

Suitable for core drills:
Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
Manufacturer
Karnasch
Straße des Friedens 10, 15848 Görsdorf, Germany
www.karnasch.de

502.94€ 557.54€

On request in weeks

Core drill HARD-LINE 110 Weldon Ø 67 mm

51-38720.166067

Core drill optimally suited for:

Steel < 500 N
Steel < 750 N
Steel < 900 N
Steel < 1100 N
Steel < 1400 N
Stainless steel < 900 N
Stainless steel>900 N
Alu < 10% Si
Alu>10% Si
Copper, brass, nickel, tin
Plastics GFK / CFK
cast iron
Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
graphite

Good for:

rails

Properties of the carbide-tipped HARD-LINE core drills:
Pre-Intermediate-trimmer geometry

manufactured in elaborate pre-middle trimmer geometry
Thus: vibration-free, quiet and easy cutting with maximum service life

Conical spiral

Made with conical spiral
Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

Sandvik carbide teeth

Only equipped with Sandvik carbide teeth
NOTE: Only the best carbide is good enough for Karnasch core drills

Suitable for core drills:
Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
Manufacturer
Karnasch
Straße des Friedens 10, 15848 Görsdorf, Germany
www.karnasch.de

153.26€ 169.90€

On request in weeks

Contact wheel Ø 200 x 150 mm

51-3922151

Delivery without ball bearing
Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

166.53€ 184.61€

On request in weeks

NC controlled parallel pulling and compensating device on the grinding head

51-3941020

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

17222.71€ 19092.61€

On request in weeks

Core drill HARD-LINE 40 Universal, Ø 20 mm

51-38720.131520

Core drill optimally suited for:

Steel < 500 N
Steel < 750 N
Steel < 900 N
Steel < 1100 N
Steel < 1400 N
Stainless steel < 900 N
Stainless steel>900 N
Alu < 10% Si
Alu>10% Si
Copper, brass, nickel, tin
Plastics GFK / CFK
cast iron
Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
graphite

Good for:

rails

Properties of the carbide-tipped HARD-LINE core drills:
Pre-Intermediate-trimmer geometry

manufactured in elaborate pre-middle trimmer geometry
Thus: vibration-free, quiet and easy cutting with maximum service life

Conical spiral

Made with conical spiral
Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

Sandvik carbide teeth

Only equipped with Sandvik carbide teeth
NOTE: Only the best carbide is good enough for Karnasch core drills

Suitable for core drills:
Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
Manufacturer
Karnasch
Straße des Friedens 10, 15848 Görsdorf, Germany
www.karnasch.de

39.91€ 44.25€

On request in weeks

Core drill HARD-LINE 40 Universal, Ø 90 mm

51-38720.131590

Core drill optimally suited for:

Steel < 500 N
Steel < 750 N
Steel < 900 N
Steel < 1100 N
Steel < 1400 N
Stainless steel < 900 N
Stainless steel>900 N
Alu < 10% Si
Alu>10% Si
Copper, brass, nickel, tin
Plastics GFK / CFK
cast iron
Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
graphite

Good for:

rails

Properties of the carbide-tipped HARD-LINE core drills:
Pre-Intermediate-trimmer geometry

manufactured in elaborate pre-middle trimmer geometry
Thus: vibration-free, quiet and easy cutting with maximum service life

Conical spiral

Made with conical spiral
Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

Sandvik carbide teeth

Only equipped with Sandvik carbide teeth
NOTE: Only the best carbide is good enough for Karnasch core drills

Suitable for core drills:
Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
Manufacturer
Karnasch
Straße des Friedens 10, 15848 Görsdorf, Germany
www.karnasch.de

204.28€ 226.46€

On request in weeks

Core drill HARD-LINE 80 Weldon Ø 62 mm

51-38720.165062

Core drill optimally suited for:

Steel < 500 N
Steel < 750 N
Steel < 900 N
Steel < 1100 N
Steel < 1400 N
Stainless steel < 900 N
Stainless steel>900 N
Alu < 10% Si
Alu>10% Si
Copper, brass, nickel, tin
Plastics GFK / CFK
cast iron
Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
graphite

Good for:

rails

Properties of the carbide-tipped HARD-LINE core drills:
Pre-Intermediate-trimmer geometry

manufactured in elaborate pre-middle trimmer geometry
Thus: vibration-free, quiet and easy cutting with maximum service life

Conical spiral

Made with conical spiral
Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

Sandvik carbide teeth

Only equipped with Sandvik carbide teeth
NOTE: Only the best carbide is good enough for Karnasch core drills

Suitable for core drills:
Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
Manufacturer
Karnasch
Straße des Friedens 10, 15848 Görsdorf, Germany
www.karnasch.de

188.21€ 208.65€

On request in weeks

Sine Grinding Machine Vise

51-3939121

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

134.76€ 149.39€

On request in weeks

Core drill HARD-LINE 55 Universal Ø 19 mm

51-38720.131619

Core drill optimally suited for:

Steel < 500 N
Steel < 750 N
Steel < 900 N
Steel < 1100 N
Steel < 1400 N
Stainless steel < 900 N
Stainless steel>900 N
Alu < 10% Si
Alu>10% Si
Copper, brass, nickel, tin
Plastics GFK / CFK
cast iron
Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
graphite

Good for:

rails

Properties of the carbide-tipped HARD-LINE core drills:
Pre-Intermediate-trimmer geometry

manufactured in elaborate pre-middle trimmer geometry
Thus: vibration-free, quiet and easy cutting with maximum service life

Conical spiral

Made with conical spiral
Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

Sandvik carbide teeth

Only equipped with Sandvik carbide teeth
NOTE: Only the best carbide is good enough for Karnasch core drills

Suitable for core drills:
Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
Manufacturer
Karnasch
Straße des Friedens 10, 15848 Görsdorf, Germany
www.karnasch.de

43.95€ 48.72€

On request in weeks