NEW PRODUCTS

View as Grid List

Sort by

Display per page

Upright drill OPTIdrill DQ 25 Special incl. vice

51-3191047SET

Precisely machined drilling table, ± 45° sideways tiltable and 360° rotatable
Massive, large dimensioned base plate with grooves, heavily ribbed at the backside
Ground multi-tooth driver
Best power transmission through aluminium pulleys in combination with toothed GATES quality V-belt
Guaranteed concentricity accuracy better than 0.03 mm measured in the drill spindle
Drill spindle with precision ball bearing
Quick action drill chuck as standard equipment
Belt cover with safety switch
Easy to use switch according to IP 54
Separate emergency stop pushbutton switch

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

961.32€ 1065.69€

On request in weeks

Mandrelless tube bending machine BM 60-T

51-4320060

NC control for setting the bending angle and the correction
counter for high repeatability
Mobile control panel with controls and pedals
Fast tool change

Powerful motor with inverter and reduction gear produces high torque
NC control for setting the bending angle and the correction
counter for high repeatability
Mobile control panel with controls and pedals
Fast tool change
All shafts hardened and ground
Material clamping is done manually
Very good price / performance ratio

Manufacturer

15467.23€ 17146.53€

On request in weeks

Upright drill OPTIdrill DH 32GS

51-3034240

High concentricity due to hardened and ground main spindle
Low-maintenance gearbox with grease lubrication
Gearbox with PA6 gears
Large speed range
Heavy, solid cast construction
Large, height-adjustable protective screen with safety switch for the utmost protection of the user
Drilling depth stop adjustable with millimeter scale
Forward / reverse operation
Machine light integrated in the drill head
Integrated expeller for easy tool change
Precision machined drilling table with diagonal T-slots with all-round cooling water channel
Thick-walled cast-iron column for high power absorption and stability
Massive base plate, large dimensions and strongly ribbed on the back

OPTIdrill DH 32GS

Tapping function
Automatic quill feed
Coolant device and chip filter according to Machinery Directive
Optional foot switch for switching between right-left rotation and thread cutting (article no. 3050032) available

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

4820.08€ 5343.41€

On request in weeks

Upright drill OPTIdrill B 28HV Special offer set

51-3020285SET

Smooth and powerful brushless drive
Separate emergency stop impact switch
Large, height-adjustable protective screen with safety switch for the utmost protection of the user
Long, ergonomic aluminum die-cast quill lever
One piece cast (B 24HV with softgrip handles)
Measurement scale for drilling depth
Belt cover with safety switch
Forward / reverse operation
Machine light

from OPTIdrill B 28HV

Quillons made of steel
Coolant system
Chip filter according to the Machinery Directive
Easy tool change through integrated expeller

OPTIdrill B 34HV

Quill stroke 160 mm
Tapping function
Digital depth gauge

Special feature of the OPTIdrill B 34 HV

Operating mode "auto"
- Engine starts automatically after lever movement
- Stops again in the starting position
- Pushbutton Start and Stop does not have to be pressed during repetitive drilling tasks
Operating mode "tapping"
- Engine is activated by moving the handle down
- The direction of rotation is changed by limit switches on the adjustable drilling depth stop

Equipment details
Powerful brushless drive

Especially quiet running
High performance
Approximately constant torque over the entire speed range

belt drive

Best power transmission through aluminum pulleys in conjunction with toothed GATES quality V-belt
Smooth running thanks to ground multi-tooth driver

Digital speed display

Integrated in the housing

Speed control

by means of potentiometer

Concentricity

Guaranteed ; 0.015 mm measured in the quill

Spindle

Precision ball bearings
High quality OPTIMUM keyless chuck as standard

V-belt tensioning device
machine light

Integrated in the drill head
Halogen lamp

Drilling

Precisely worked
Diagonal T-slots
360° rotatable
Circulating cooling water channel

Baseplate

Solid
Large dimensions
Heavily ribbed on the reverse side

cast column

Thick-walled
High power and stability

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

4470.32€ 4955.67€

On request in weeks

Manual swing bending machine HSBM 1520-20

51-3779001

Simple operation
Heavy, compact welded construction
Particularly low maintenance
For easy bending with precise adjustment of the bending angle using a stop with scale
Sheet thickness adjustable via bending beam
Tools for VA on request: sharp bending rail and bending bar made of Toolox 33, segmented tools and bending bar made of Toolox 33 and segmented goat foot tools made of Toolox 33
Quality Made in Europe

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

14553.06€ 16133.11€

On request in weeks

Drilling and milling machine OPTImill BF 20LVario

51-3338122

Feed spindles can be adjusted backlash-free using adjustable spindle nuts
Stable dovetail guide, precision-ground and scraped with adjustable gibs
EMC filter (to protect sensitive electronics from interference from conducted interference signals class B)
All guides are ground and visibly scraped (oil pockets for lubrication)
Precisely machined
Two-stage gear ratio for powerful transmission of motor power
Powerful DC motor with permanent current monitoring
Double-row angular contact ball bearings in the axles, adjustable without play
Safety electrics in 24 volt version
Bellows as guide protection
Right/left rotation
Drilling and milling head can be tilted by ± 900 for milling and drilling work at any angle
Height-adjustable protective screen with microswitch, against flying chips and parts, for maximum protection of the user

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

2022.03€ 2241.56€

On request in weeks

Extraction device for metal grinding machines AS 6003 D

51-4420600

Suitable for dry grinding machines
Separation of coarse particles in a prechamber
Filter material made of fine cellulose
Quick and easy filter change
Chip container with chassis for easy emptying

Suitable for dry grinding machines
Separation of coarse particles in a prechamber
Filter material made of fine cellulose
Quick and easy filter change
Adjustment of the automatic filter cleaning via controls
Chip container with chassis for easy emptying

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

24227.29€ 26857.69€

On request in weeks

Motorized ring bending machine PRM 10 E

51-3780011

for round bending of square material
stable construction, fixable to the ground
Drive the two lower rollers by means of a hand crank
Rolls hardened and ground
Steel shafts, hardened and ground
Delivery via upper roller

PRM 10 E

motor design
horizontal and vertical work possibility
powerful 400Volt engine
Left / right rotation by foot pedal

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

2172.11€ 2407.94€

On request in weeks

Motorized sheet metal shears MTBS 2100-40 B

51-3815520

Heavy, robust welded construction
Splitter-guided upper beam with adjustable flat guides
Manual cutting gap adjustment at the front of the machine
LED cutting line illumination and elongated holes in the top cover for an optimal view of the cutting edge and for cutting on tear-off
Solid 90° side stop with 1000 mm length, T-slot, tilting cam and scale
Two solid sheet support arms with T-slots and tilting cams
Motorized, NC-controlled backgauge with 750 mm travel range
Backgauge drive with frequency converter, motor with brake and recirculating ball screws
High-quality, rotatable knives suitable for cutting stainless steel
Heavy hold-down beam with gentle rubber inserts
Rear area protected by light curtain
Operation via mobile foot pedal console with emergency stop

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

38816.95€ 43031.35€

On request in weeks

Manual pipe clinker MRA 3

51-3772993

Release up to three different pipe diameters (MRA 2)
Can be used both horizontally and vertically
Low effort

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

309.49€ 343.10€

On request in weeks

Bench drill OPTIdrill B 16H

51-3020217

Smooth and powerful industrial electric motor
Separate emergency stop impact switch
Stable casting column
Measurement scale for drilling depth
Precisely machined drill table with diagonal T-slots and circumferential cooling water channel
Drilling table 360 ° rotatable
V-belt cover with safety switch
V-belt quick-clamping device
Long, ergonomic cast aluminum sleeve lever cast in one piece (B 16H / B 24H with softgrip handles)
Massive, large base plate with grooves, strongly ribbed on the back
By swinging away the drilling table, base plate can be used as a work surface for particularly high workpieces
Guaranteed concentricity measured better than 0.015 mm in the drill quill
Drill spindle with precision ball bearings
High-quality OPTIMUM keyless chuck in the standard scope of delivery
Large, height-adjustable protective screen with safety switch

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

1086.92€ 1204.92€

On request in weeks

Horizontal metal band saw HMBS 540 CNC X DG 2000 HORIZONTAL

51-3692215

Two-column guided horizontal saw for sawing solid bars and bar profiles
Siemens S7-1500 control system with wide range of functions and operation via large 7" touch display
With 2000 mm material transporter as standard -> frequency-controlled feed via circulating spindle and servomotor
Material library with preset sawing parameters and characteristic curves
Cutting movement via rotating spindle and servo motor
With ARP (automatic cutting feed control) -> Automatic saw blade feed depending on the material resistance. Feed speed is constantly adapted to the current cutting load. ARP enables shorter work processes and a longer service life for the saw bands.
Automatic positioning after entering the desired angle
Hydraulic clamping of the turntable enables precise angular cutting
Robust machine body and the smallest possible distances between the saw blade, machine guide and workpiece minimize vibrations for maximum sawing performance
Infinitely variable cutting speed from 15 - 150 m/min
Saw blade drive via bevel gearbox, asynchronous motor and frequency inverter
For straight cuts, the material is clamped in front of and behind the cut using a two-part vice
Pressure adjustment of the hydraulic vice clamping via control valve with pressure gauge
Saw blade inclination of 7° and hydraulic saw blade tension increase the service life of the saw blade
Front band guide moves automatically parallel to the movable vice jaw
chip clearing brush driven via belt roller
Emulsion cooling with liquid distribution into the saw blade guides and directly into the cutting channel
Safety light barrier from LEUZE in front of the machine and the material transporter
More powerful motor optionally available
Saw blade guides with integrated cooling system

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

116681.01€ 129349.24€

On request in weeks

Bench grinding machine OPTIgrind GU 30

51-3101530

Heavy, durable industrial design with maintenance-free motor
Housing made of extruded aluminum
Long service life and smooth running due to balanced rotor with quality ball bearings
Spark protection on each grinding wheel reduces flying sparks
Sight glasses made of shatterproof material
Vibration damping rubber feet
Coarse and fine grinding wheel (K36/K80) as standard

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

1190.87€ 1320.17€

On request in weeks

GSB 600, CT

48-S06011A0320

60.71€ 78.91€

On request in weeks

Screw compressor oil LCG68-PS for biogas plants, 19 l drum

52-2500021

Manufacturer
Klüber Lubrication Deutschland GmbH & Co. KG
Geisenhausenerstraße 7, 81379 Munich, Germany
customer.service.de@klueber.com

2155.07€ 2389.05€

On request in weeks

Maintenance kit LK 2000H MMGD 3-10 (2.2-7.5)

52-0260KTA380

Long Life Kit for the scheduled maintenance of screw compressors
Original FSN parts have been carefully selected, inspected and tested by specialized technicians to ensure the highest efficiency and longevity of the compressor.
Specialized professionals are in constant contact with our sales offices around the world to provide spare parts to our customers in the shortest possible time.
The FSN Long Life Kit, designed specifically for screw compressors, extends maintenance intervals, reduces maintenance costs and guarantees consistent product performance with resulting energy savings.

Note:

Not suitable for IE 3 models
We recommend changing the oil at the specified intervals or annually.
We recommend the use of our oil Red-Energy-PLUS (not included in the Long Life Kit).

Manufacturer
FNA S.p.A.
Via Einaudi 6, 10070 Robassomero, Italy
info@fnacompressors.com

126.85€ 140.63€

On request in weeks