NEW PRODUCTS

• Anodized aluminum sliding carriage
• Large dimensioning milling unit made of cast iron, swiveling to -45° to the rear
• Four cutting speeds from 3500 to 10000 min¯¹
• Right-left rotation as standard
• Display height and inclination 1/10 mm exactly
• Powerful 5.0 kW industrial engine

• Stable steel gray cast iron construction
• Anodized aluminum sliding carriage
• Large dimensioning milling unit made of cast iron, swiveling to -45 ° to the rear
• Four cutting speeds from 3500 to 10000 min¯¹
• Right-left rotation as standard
• Display height and inclination 1/10 mm exactly
• Quick and easy change of speed via eccentric tension
• Solid and precise gray cast iron table, stress-free and post-annealed for lasting precision
• Powerful 5.0 kW industrial engine
• Curved cutting guard in scope of supply
• Made in Italy

• Stable steel gray cast iron construction
• Large dimensioning milling unit made of cast iron, swiveling to -45 ° to the rear
• Display of milling speeds by LEDs
• Fast, trouble-free speed change via eccentric tension
• Forward and reverse running
• Display height and inclination 1/10 mm exactly
• Heavy-duty milling stop: with fine adjustment via toothed rack, with numeric display, aluminum stop jaws, 3-positionable for quick repetition of adjustment

• Stable steel gray cast iron construction
• Swiveling milling spindle from 0° to -45° backwards
• 3 spindle speeds from 3500 - 10000 min¯¹
• Standard with right-left rotation of the milling spindle
• Large dimensioned milling unit made of gray cast iron, directly attached to the table
• Solid and precise gray cast iron table
• Fast and easy change of speed
• Powerful 5.0 kW industrial engine
• Standard curved cutting guard

Made in Italy

Aluminum sliding carriage

• Equipped with a million times proven ball contact system
• Permanently smooth-running
• Dust- and dirt-resistant due to minimal contact point between ball and trapezoidal rail
• 10-year HOLZKRAFT warranty on guideway wear

Cast iron milling unit

• Attached directly to the milling table
• Milling spindle mounted high up with precision ball bearing, thus the lowest possible bearing load and the highest possible service life
• 3 milling speeds from 3500 to 10000 min¯¹

Powerful motors

• equipped with powerful three-phase motor

Milling protection

• The milling protection is equipped as standard with a height-adjustable guide rail and mudguard for maximum safety.

• Exact milling stop with a quick adjustment and a fine adjustment with scale on the stop jaw
• The integrated suction connection ensures a clear view

Table opening

• A large cut-out table opening also allows the use of larger flatteners and tenoning and slotting tools above and below the table

• Supplied as standard

• Versatile integrable stop for bridging the tool gap
• Allows safe working even with narrow workpieces

• M Digital version with motorized height-adjustable and swiveling milling spindle
• With digital display of the set values
• Speed ​​indicator on the front of the machine via LED
• With table extension left and right

• Stable steel gray cast iron construction
• Large dimensioning milling unit made of cast iron, swiveling to -45 ° to the rear
• Display of milling speeds by LEDs
• Fast, trouble-free speed change via eccentric tension
• Forward and reverse running
• Display height and inclination 1/10 mm exactly
• Heavy-duty milling stop: with fine adjustment via toothed rack, with numeric display, aluminum stop jaws, 3-positionable for quick repetition of adjustment

• Anodized aluminum sliding carriage
• Large dimensioning milling unit made of cast iron, swiveling to -45° to the rear
• Four cutting speeds from 3500 to 10000 min¯¹
• Right-left rotation as standard
• Display height and inclination 1/10 mm exactly
• Powerful 5.0 kW industrial engine

• Stable steel gray cast iron construction
• Anodized aluminum sliding carriage
• Large dimensioning milling unit made of cast iron, swiveling to -45 ° to the rear
• Four cutting speeds from 3500 to 10000 min¯¹
• Right-left rotation as standard
• Display height and inclination 1/10 mm exactly
• Quick and easy change of speed via eccentric tension
• Solid and precise gray cast iron table, stress-free and post-annealed for lasting precision
• Powerful 5.0 kW industrial engine
• Curved cutting guard in scope of supply
• Made in Italy

• M Digital version with motorized height-adjustable and swiveling milling spindle
• With digital display of the set values
• Speed ​​indicator on the front of the machine via LED

• Stable steel gray cast iron construction
• Large dimensioning milling unit made of cast iron, swiveling to -45 ° to the rear
• Display of milling speeds by LEDs
• Fast, trouble-free speed change via eccentric tension
• Forward and reverse running
• Display height and inclination 1/10 mm exactly
• Heavy-duty milling stop: with fine adjustment via toothed rack, with numeric display, aluminum stop jaws, 3-positionable for quick repetition of adjustment

• Stable steel gray cast iron construction
• With rigid milling spindle
• 3 spindle speeds 3500 to 10,000 min¯¹
• Milling spindle with right-left rotation
• Large dimensioned milling unit made of gray cast iron, directly attached to the table
• With extraction hood under the work table for a better suction
• Solid and precise gray cast iron table
• Fast and easy change of speed
• Powerful engine with 5.0 kW
• Standard curved cutting guard
• Quality Made in Italy

• Attached directly to the milling table
• Milling spindle mounted high up with precision ball bearing, thus the lowest possible bearing load and the highest possible service life
• 3 milling speeds from 3500 to 10000 min¯¹

• equipped with powerful three-phase motor

• The standard milling guard is equipped as standard with a height-adjustable guide rail and guard plate for maximum safety.

• Exact milling stop with a quick adjustment and a fine adjustment with scale on the stop jaw
• The integrated suction connection ensures a clear view

• A large cut-out table opening also allows the use of larger flatteners and tenoning and slotting tools above and below the table

• Supplied as standard

• Versatile integrable stop for bridging the tool gap
• enables safe work even with narrow workpieces

• Optimum protection on each router, individually adjustable to the task at hand
• Universal basic elements for holding AIGNER safety and working devices
• Quick adjustable by simultaneous clamping of all individually movable rods
• Made of high quality aluminum
• Universal application on all HOLZKRAFT table milling machines
• 500 mm: Art. No .: 5851000
• 650 mm: Art. No .: 5851650

• Change planing knives in seconds
• No more adjusting and screwing
• Self-locking
• Particularly low noise

• Change planing knives in seconds
• No more adjusting and screwing
• Self-locking
• Particularly low noise

• Change planing knives in seconds
• No more adjusting and screwing
• Self-locking
• Particularly low noise

• Diagonally toothed steel infeed roller for constant and even material infeed, resulting in chip removal from as little as 0.2 mm (with a minimum workpiece thickness of 3 mm) - ideal for economical planing of fine wood
• Models with TERSA cutterblock for changing planing knives in seconds and particularly quiet operation
• Material feed with two speeds
• Particularly long planing tables enable easy and precise planing of workpieces
• Grey cast iron work tables, annealed and stress-free, making them robust and permanently flat
• Dressing tables open to the rear at the same time for short set-up times
• Planer thicknessing table adjustment via handwheel with numerical display for planing height
• High machine weight for maximum precision and smooth running
• Powerful industrial motor
• Robust steel/cast iron construction
• Equipped with fold-down planer shaft guard for user-friendly operation
• Quality - Made in Italy

• Control unit with electronic display for programmed, motorised height adjustment and tilting of the sawing unit
• Cast iron saw unit warrantys torsional rigidity and vibration-free operation
• Sawing unit with permanently precise double swivel segment guide, 6 years Holzkraft warranty on wear of the swivel segments
• Large edging frame with roller facilitates panel feeding
• Telescopic ruler with two professional folding stops
• Smooth-running and precise sliding carriage made of anodized aluminium with proven and permanently smooth-running ball contact system on hardened steel guide tracks, 10-year warranty on wear of the guide tracks
• Scoring device equipped with its own drive and easily adjustable from the outside
• Two-position saw blade anti-sway device manually adjustable
• A 3 version with three-axis control additionally equipped with motorized rip fence with electronic positioning, position indication via encoder, adjustment via ball screw, infinitely variable adjustment via switch or automatic positioning and possibility of incremental adjustment
• UP version with swivelling control panel for maximum flexibility
• X-version with Compex mitre fence for fast and accurate execution of mitre cuts, automatic compensation of the fence position. (length compensation)
• Optionally available: two saw blade speeds, cross-cut fence with digital display
• Made in Italy

• With scoring unit as standard
• Telescopic fence that can be swiveled from -45° to +45° with finely adjustable fence flap
• Robust and precise design with format sliding carriage
• The cast iron work table enables low-vibration work
• Saw blade height adjustment via a handwheel
• Saw blade tilt adjustable from 90 to 45° via handwheel with scale
• Stable saw unit guarantees vibration-free and precise work
• Solid outrigger table with roller and telescopic arm for maximum stability
• Mitre fence and hold-down device can be moved over the entire length of the carriage
• Large aluminum parallel fence on round bar guide with fine adjustment
• Powerful drive motor for constant cutting speed, even at a cutting height of 100 mm
• Large work table and standard table extension for cutting widths up to 1220 mm

• Ideal for demanding craftsmen and carpentersThe
• particularly long, one-piece planing tables enable easy planing of workpiecesWorking tables
• are made of gray cast iron, making them robust and permanently
• flatPlaning tables that open simultaneously
• to the
• rear with tension spring support for quick and convenient retoolingThanks to
• the permanently mounted extraction hood, it is not necessary to reposition the extraction hose when retooling,
• This saves valuable working timeInclined
• toothed steel infeed roller ensures constant and even wood infeedRubber outfeed roller
• in the thicknessing outfeed ensures even wood outfeedMaterial feed
• with four speedsPlane thicknessing table adjustment
• via handwheel with integrated display for the planing
• heightDIGITAL
• version
• :
• with electric thicknessing table height adjustment and digital
• displayOn/off switch in operator positionPowerful
• industrial motorThe
• high machine weight ensures maximum precision and smooth running
• Equipped with fold-down planer shaft guard for user-friendly working
• Preparation for slot drilling device/li>Quality
• Made in Italy

• Simple and precise adjustment of chip removal for dimensionally accurate thickness planing
• Automatic workpiece feed
• Straight-toothed feed roller and rubber-coated pull-out roller for even feed without damaging the workpiece
• Easily adjustable aluminium planing stop, tiltable from 90° to +45°
• Large-dimensioned planing table made of ribbed die-cast aluminium
• Large thickness table made of grey cast iron with ground surface
• Integrated, foldable chip extraction hood

• Solid worktable made of heavily ribbed gray cast iron - for maximum stability and durability
• Robust welded steel base frame - guarantees high torsional rigidity and vibration-free working
• Precise format sliding carriage made of anodized aluminium - guided smoothly by a high-quality ball contact system
• Carbide guideways - for lasting precision and minimal maintenance
• Pivoting cast iron saw unit with double segment guide - exact zero-point pivoting for maximum cutting accuracy
• Solid rip fence with round bar guide

• Equipped with movable eccentric clamping device
• Integrated angle cutting device on the sliding carriage - for fast and precise miter cuts