Search

For logged in customers  up to -10%

Show prices tax inclusive
EN
All Categories
    Menu Close

    For logged in customers  up to -10%

    Power tools, machinery

    View as Grid List
    Sort by
    Display per page
    Core drill  BLUE-LINE PRO 30 Weldon, Ø 23 mm
    51-38720.128423
    Core drill optimally suited for:
    • Steel < 500 N
    • Steel < 750 N
    • Steel < 900 N
    • Steel < 1100 N
    • Stainless steel < 900 N
    • Stainless steel>900 N
    • Alu < 10% Si
    • Alu>10% Si
    • Copper, brass, nickel, tin
    • Plastics GFK / CFK
    • cast iron
    • Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
    • rails

    Good for:
    • Steel < 1400 N

    Use possible with:
    • graphite


    Characteristics of BLUE-LINE core drills:
    ASP powder steel
    • Made of ASP powder steel for drilling even the most difficult
      Materials such as railroad tracks, stainless steels, exotic alloys
    • Always available where maximum service life is required

    Step hardened HSS core drill
    • Standard hardened HSS core drills in stages
    • As a result extremely hard tooth tips (68 HRC) and still flexible core drill

    Completely sanded from the full material
    • This fine grinding increases the cutting performance while reducing friction
    • For more service life

    unique and patented Durablue coating
    • Extreme surface hardness and smoothness
    • Extreme service life even under less than ideal working conditions such as overhead work, dry drilling, etc

    Five cutting geometries
    • Specially adapted cutting geometries especially for the different diameters and cutting depths

    Suitable for core drills:
    Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
    Manufacturer
    Karnasch
    Straße des Friedens 10, 15848 Görsdorf, Germany
    www.karnasch.de

    89.65€ 112.07€
    On request in weeks
    Core drill  BLUE-LINE 30 Weldon, Ø 52 mm
    51-38720.131252
    Core drill optimally suited for:
    • Steel < 500 N
    • Steel < 750 N
    • Steel < 900 N
    • Alu < 10% Si
    • Copper, brass, nickel, tin
    • Plastics GFK / CFK

    Good for:
    • Steel < 1100 N
    • Stainless steel < 900 N
    • Alu>10% Si
    • cast iron

    Use possible with:
    • Steel < 1400 N
    • Stainless steel>900 N
    • Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
    • rails


    Characteristics of BLUE-LINE core drills:
    HSS-XE special steel
    • Made of high-alloy HSS-XE special steel
    • Thus extreme hardness at the tooth tips (up to 68 HRC)
    • Long service life

    Step hardened HSS core drill
    • Standard hardened HSS core drills in stages
    • As a result extremely hard tooth tips (68 HRC) and still flexible core drill

    Completely sanded from the full material
    • This fine grinding increases the cutting performance while reducing friction
    • For more service life

    unique and patented Durablue coating
    • Extreme surface hardness and smoothness
    • Extreme service life even under less than ideal working conditions such as overhead work, dry drilling, etc

    Five cutting geometries
    • Specially adapted cutting geometries especially for the different diameters and cutting depths

    Suitable for core drills:
    Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
    Manufacturer
    Karnasch
    Straße des Friedens 10, 15848 Görsdorf, Germany
    www.karnasch.de

    138.21€ 172.77€
    On request in weeks
    Saw band HSS Bi-Metall M 42  2925 x 27 x 0.9 mm, 4 - 6 ZpZ, 6 °
    51-3357540
    Saw bands suitable for processing:



        • Structural steel
        • Deep drawing steel
        • cutting steel
        • tempering steel
        • hardened steel
        • Thick-walled pipe
        • Solid material round steel
        • Solid material square
        • Solid material flat steel
        • Solid material bundle
        • Rust and acid resistant steel
        • pipe
        • carrier



        General information about bi-metal saw bands:
        The starting material of these bi-metal saw bands is a two-component material (bi-metal) obtained by electron welding. The band made of this material has a high-hardening, wear-resistant high-performance high-speed steel in the teeth, while the band body made of alloyed tempered steel is spring-hard and fatigue-proof.
        Manufacturer
        Optimum Maschinen Germany GmbH
        Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
        info@optimum-maschinen.de

        40.00€ 50.00€
        On request in weeks
        Core drill  BLUE-LINE 30 Weldon, Ø 21 mm
        51-38720.131221
        Core drill optimally suited for:
        • Steel < 500 N
        • Steel < 750 N
        • Steel < 900 N
        • Alu < 10% Si
        • Copper, brass, nickel, tin
        • Plastics GFK / CFK

        Good for:
        • Steel < 1100 N
        • Stainless steel < 900 N
        • Alu>10% Si
        • cast iron

        Use possible with:
        • Steel < 1400 N
        • Stainless steel>900 N
        • Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
        • rails


        Characteristics of BLUE-LINE core drills:
        HSS-XE special steel
        • Made of high-alloy HSS-XE special steel
        • Thus extreme hardness at the tooth tips (up to 68 HRC)
        • Long service life

        Step hardened HSS core drill
        • Standard hardened HSS core drills in stages
        • As a result extremely hard tooth tips (68 HRC) and still flexible core drill

        Completely sanded from the full material
        • This fine grinding increases the cutting performance while reducing friction
        • For more service life

        unique and patented Durablue coating
        • Extreme surface hardness and smoothness
        • Extreme service life even under less than ideal working conditions such as overhead work, dry drilling, etc

        Five cutting geometries
        • Specially adapted cutting geometries especially for the different diameters and cutting depths

        Suitable for core drills:
        Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
        Manufacturer
        Karnasch
        Straße des Friedens 10, 15848 Görsdorf, Germany
        www.karnasch.de

        42.00€ 52.50€
        On request in weeks
        Core drill  BLUE-LINE 55 Weldon, Ø 28 mm
        51-38720.131328
        Core drill optimally suited for:
        • Steel < 500 N
        • Steel < 750 N
        • Steel < 900 N
        • Alu < 10% Si
        • Copper, brass, nickel, tin
        • Plastics GFK / CFK

        Good for:
        • Steel < 1100 N
        • Stainless steel < 900 N
        • Alu>10% Si
        • cast iron

        Use possible with:
        • Steel < 1400 N
        • Stainless steel>900 N
        • Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
        • rails


        Characteristics of BLUE-LINE core drills:
        HSS-XE special steel
        • Made of high-alloy HSS-XE special steel
        • Thus extreme hardness at the tooth tips (up to 68 HRC)
        • Long service life

        Step hardened HSS core drill
        • Standard hardened HSS core drills in stages
        • As a result extremely hard tooth tips (68 HRC) and still flexible core drill

        Completely sanded from the full material
        • This fine grinding increases the cutting performance while reducing friction
        • For more service life

        unique and patented Durablue coating
        • Extreme surface hardness and smoothness
        • Extreme service life even under less than ideal working conditions such as overhead work, dry drilling, etc

        Five cutting geometries
        • Specially adapted cutting geometries especially for the different diameters and cutting depths

        Suitable for core drills:
        Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
        Manufacturer
        Karnasch
        Straße des Friedens 10, 15848 Görsdorf, Germany
        www.karnasch.de

        65.66€ 82.08€
        On request in weeks
        Core drill  BLUE-LINE 55 Weldon, Ø 40 mm
        51-38720.131340
        Core drill optimally suited for:
        • Steel < 500 N
        • Steel < 750 N
        • Steel < 900 N
        • Alu < 10% Si
        • Copper, brass, nickel, tin
        • Plastics GFK / CFK

        Good for:
        • Steel < 1100 N
        • Stainless steel < 900 N
        • Alu>10% Si
        • cast iron

        Use possible with:
        • Steel < 1400 N
        • Stainless steel>900 N
        • Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
        • rails


        Characteristics of BLUE-LINE core drills:
        HSS-XE special steel
        • Made of high-alloy HSS-XE special steel
        • Thus extreme hardness at the tooth tips (up to 68 HRC)
        • Long service life

        Step hardened HSS core drill
        • Standard hardened HSS core drills in stages
        • As a result extremely hard tooth tips (68 HRC) and still flexible core drill

        Completely sanded from the full material
        • This fine grinding increases the cutting performance while reducing friction
        • For more service life

        unique and patented Durablue coating
        • Extreme surface hardness and smoothness
        • Extreme service life even under less than ideal working conditions such as overhead work, dry drilling, etc

        Five cutting geometries
        • Specially adapted cutting geometries especially for the different diameters and cutting depths

        Suitable for core drills:
        Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
        Manufacturer
        Karnasch
        Straße des Friedens 10, 15848 Görsdorf, Germany
        www.karnasch.de

        116.66€ 145.82€
        On request in weeks
        Core drill  GOLD-LINE 30 Weldon, Ø 43 mm
        51-38720.1260U43
        Core drill optimally suited for:
        • Steel < 500 N
        • Steel < 750 Nm
        • Plastics GFK / CFK

        Good for:
        • Steel < 900 N
        • Alu < 10% Si
        • Copper, brass, nickel, tin
        • cast iron

        Use possible with:
        • Steel < 1100 N
        • Alu>10% Si

        Properties of the GOLD-LINE core drills:
        HSS-XE special steel
        • Made of high-alloy HSS-XE special steel
        • Thus extreme hardness at the tooth tips (up to 68 HRC)
        • Long service life

        Step hardened HSS core drill
        • Standard hardened HSS core drills in stages
        • As a result extremely hard tooth tips (68 HRC) and still flexible core drill

        Completely sanded from the full material
        • This fine grinding increases the cutting performance while reducing friction
        • For more service life

        Gold-Tech surface treatment
        • Special treatment for longer service life

        Five cutting geometries
        • Specially adapted cutting geometries especially for the different diameters and cutting depths

        Suitable for core drills:
        Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bektop, Bux, Euroboor, Evolution, Hougen, Jancy, Magbroach, Magtron, Magnetor, Promag, Rotabroach, Ruko + Ruko Easy Lock, Universal ...
        Manufacturer
        Karnasch
        Straße des Friedens 10, 15848 Görsdorf, Germany
        www.karnasch.de

        73.88€ 92.36€
        On request in weeks
        Core drill  BLUE-LINE 30 Weldon, Ø 60 mm
        51-38720.131260
        Core drill optimally suited for:
        • Steel < 500 N
        • Steel < 750 N
        • Steel < 900 N
        • Alu < 10% Si
        • Copper, brass, nickel, tin
        • Plastics GFK / CFK

        Good for:
        • Steel < 1100 N
        • Stainless steel < 900 N
        • Alu>10% Si
        • cast iron

        Use possible with:
        • Steel < 1400 N
        • Stainless steel>900 N
        • Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
        • rails


        Characteristics of BLUE-LINE core drills:
        HSS-XE special steel
        • Made of high-alloy HSS-XE special steel
        • Thus extreme hardness at the tooth tips (up to 68 HRC)
        • Long service life

        Step hardened HSS core drill
        • Standard hardened HSS core drills in stages
        • As a result extremely hard tooth tips (68 HRC) and still flexible core drill

        Completely sanded from the full material
        • This fine grinding increases the cutting performance while reducing friction
        • For more service life

        unique and patented Durablue coating
        • Extreme surface hardness and smoothness
        • Extreme service life even under less than ideal working conditions such as overhead work, dry drilling, etc

        Five cutting geometries
        • Specially adapted cutting geometries especially for the different diameters and cutting depths

        Suitable for core drills:
        Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
        Manufacturer
        Karnasch
        Straße des Friedens 10, 15848 Görsdorf, Germany
        www.karnasch.de

        167.33€ 209.15€
        On request in weeks
        Core drill  BLUE-LINE 30 Weldon, Ø 53 mm
        51-38720.131253
        Core drill optimally suited for:
        • Steel < 500 N
        • Steel < 750 N
        • Steel < 900 N
        • Alu < 10% Si
        • Copper, brass, nickel, tin
        • Plastics GFK / CFK

        Good for:
        • Steel < 1100 N
        • Stainless steel < 900 N
        • Alu>10% Si
        • cast iron

        Use possible with:
        • Steel < 1400 N
        • Stainless steel>900 N
        • Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
        • rails


        Characteristics of BLUE-LINE core drills:
        HSS-XE special steel
        • Made of high-alloy HSS-XE special steel
        • Thus extreme hardness at the tooth tips (up to 68 HRC)
        • Long service life

        Step hardened HSS core drill
        • Standard hardened HSS core drills in stages
        • As a result extremely hard tooth tips (68 HRC) and still flexible core drill

        Completely sanded from the full material
        • This fine grinding increases the cutting performance while reducing friction
        • For more service life

        unique and patented Durablue coating
        • Extreme surface hardness and smoothness
        • Extreme service life even under less than ideal working conditions such as overhead work, dry drilling, etc

        Five cutting geometries
        • Specially adapted cutting geometries especially for the different diameters and cutting depths

        Suitable for core drills:
        Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
        Manufacturer
        Karnasch
        Straße des Friedens 10, 15848 Görsdorf, Germany
        www.karnasch.de

        141.66€ 177.07€
        On request in weeks
        Roller conveyor extension  2000 x 600 mm, motorized
        51-3649257
        requires article 3649256
        Manufacturer
        Stürmer Maschinen GmbH
        Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
        info@stuermer-maschinen.de

        5610.24€ 7012.81€
        On request in weeks
        Core drill  GOLD-LINE 30 Weldon, Ø 39 mm
        51-38720.1260U39
        Core drill optimally suited for:
        • Steel < 500 N
        • Steel < 750 Nm
        • Plastics GFK / CFK

        Good for:
        • Steel < 900 N
        • Alu < 10% Si
        • Copper, brass, nickel, tin
        • cast iron

        Use possible with:
        • Steel < 1100 N
        • Alu>10% Si

        Properties of the GOLD-LINE core drills:
        HSS-XE special steel
        • Made of high-alloy HSS-XE special steel
        • Thus extreme hardness at the tooth tips (up to 68 HRC)
        • Long service life

        Step hardened HSS core drill
        • Standard hardened HSS core drills in stages
        • As a result extremely hard tooth tips (68 HRC) and still flexible core drill

        Completely sanded from the full material
        • This fine grinding increases the cutting performance while reducing friction
        • For more service life

        Gold-Tech surface treatment
        • Special treatment for longer service life

        Five cutting geometries
        • Specially adapted cutting geometries especially for the different diameters and cutting depths

        Suitable for core drills:
        Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bektop, Bux, Euroboor, Evolution, Hougen, Jancy, Magbroach, Magtron, Magnetor, Promag, Rotabroach, Ruko + Ruko Easy Lock, Universal ...
        Manufacturer
        Karnasch
        Straße des Friedens 10, 15848 Görsdorf, Germany
        www.karnasch.de

        62.55€ 78.18€
        On request in weeks
        Core drill  SL50WLDM44MM
        51-38720.126544
        Core drill optimally suited for:
        • Steel < 500 N
        • Plastics GFK / CFK

        Good for:
        • Steel < 750 Nm
        • Copper, brass, nickel, tin

        Use possible with:
        • Steel < 900 N
        • Alu < 10% Si

        Properties of SILVER-LINE core drills:
        HSS-XE special steel
        • Made of high-alloy HSS-XE special steel
        • Thus extreme hardness at the tooth tips (up to 68 HRC)
        • Long service life

        Step hardened HSS core drill
        • Standard hardened HSS core drills in stages
        • As a result extremely hard tooth tips (68 HRC) and still flexible core drill

        Five cutting geometries
        • Specially adapted cutting geometries especially for the different diameters and cutting depths

        Suitable for core drills:
        Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bektop, Bux, Euroboor, Evolution, Hougen, Jancy, Magbroach, Magtron, Magnetor, Promag, Rotabroach, Ruko + Ruko Easy Lock, Universal ...
        Manufacturer
        Karnasch
        Straße des Friedens 10, 15848 Görsdorf, Germany
        www.karnasch.de

        89.65€ 112.07€
        On request in weeks
        Core drill  BLUE-LINE 30 Weldon, Ø 12 mm
        51-38720.131212
        Core drill optimally suited for:
        • Steel < 500 N
        • Steel < 750 N
        • Steel < 900 N
        • Alu < 10% Si
        • Copper, brass, nickel, tin
        • Plastics GFK / CFK

        Good for:
        • Steel < 1100 N
        • Stainless steel < 900 N
        • Alu>10% Si
        • cast iron

        Use possible with:
        • Steel < 1400 N
        • Stainless steel>900 N
        • Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
        • rails


        Characteristics of BLUE-LINE core drills:
        HSS-XE special steel
        • Made of high-alloy HSS-XE special steel
        • Thus extreme hardness at the tooth tips (up to 68 HRC)
        • Long service life

        Step hardened HSS core drill
        • Standard hardened HSS core drills in stages
        • As a result extremely hard tooth tips (68 HRC) and still flexible core drill

        Completely sanded from the full material
        • This fine grinding increases the cutting performance while reducing friction
        • For more service life

        unique and patented Durablue coating
        • Extreme surface hardness and smoothness
        • Extreme service life even under less than ideal working conditions such as overhead work, dry drilling, etc

        Five cutting geometries
        • Specially adapted cutting geometries especially for the different diameters and cutting depths

        Suitable for core drills:
        Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
        Manufacturer
        Karnasch
        Straße des Friedens 10, 15848 Görsdorf, Germany
        www.karnasch.de

        36.22€ 45.27€
        On request in weeks
        Core drill  GOLD-LINE 30 Weldon, Ø 37 mm
        51-38720.1260U37
        Core drill optimally suited for:
        • Steel < 500 N
        • Steel < 750 Nm
        • Plastics GFK / CFK

        Good for:
        • Steel < 900 N
        • Alu < 10% Si
        • Copper, brass, nickel, tin
        • cast iron

        Use possible with:
        • Steel < 1100 N
        • Alu>10% Si

        Properties of the GOLD-LINE core drills:
        HSS-XE special steel
        • Made of high-alloy HSS-XE special steel
        • Thus extreme hardness at the tooth tips (up to 68 HRC)
        • Long service life

        Step hardened HSS core drill
        • Standard hardened HSS core drills in stages
        • As a result extremely hard tooth tips (68 HRC) and still flexible core drill

        Completely sanded from the full material
        • This fine grinding increases the cutting performance while reducing friction
        • For more service life

        Gold-Tech surface treatment
        • Special treatment for longer service life

        Five cutting geometries
        • Specially adapted cutting geometries especially for the different diameters and cutting depths

        Suitable for core drills:
        Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bektop, Bux, Euroboor, Evolution, Hougen, Jancy, Magbroach, Magtron, Magnetor, Promag, Rotabroach, Ruko + Ruko Easy Lock, Universal ...
        Manufacturer
        Karnasch
        Straße des Friedens 10, 15848 Görsdorf, Germany
        www.karnasch.de

        58.22€ 72.78€
        On request in weeks
        Saw band HSS Bi-Metall, M 42  2645 x 27 x 0,9 mm, 6-10 ZpZ, 0°
        51-3357537
        Saw bands suitable for processing:


          • Structural steel
          • Deep drawing steel
          • cutting steel
          • tempering steel
          • hardened steel
          • Thick-walled pipe
          • Solid material round steel
          • Cast iron
          • pipe
          • carrier
          • bunch

          General information about bi-metal saw bands:
          The starting material of these bi-metal saw bands is a two-component material (bi-metal) obtained by electron welding. The band made of this material has a high-hardening, wear-resistant high-performance high-speed steel in the teeth, while the band body made of alloyed tempered steel is spring-hard and fatigue-proof.
          Manufacturer
          Optimum Maschinen Germany GmbH
          Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
          info@optimum-maschinen.de

          35.24€ 44.04€
          On request in weeks
          Roller conveyor  2000 x 600 mm
          51-3649043

          Manufacturer
          Stürmer Maschinen GmbH
          Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
          info@stuermer-maschinen.de

          3940.84€ 4926.06€
          On request in weeks
          Rail extension for stop with scale  2m, end piece
          51-3649831

          Manufacturer
          Stürmer Maschinen GmbH
          Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
          info@stuermer-maschinen.de

          494.35€ 617.94€
          On request in weeks
          Roller conveyor  1000 x 600 mm
          51-3649042

          Manufacturer
          Stürmer Maschinen GmbH
          Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
          info@stuermer-maschinen.de

          2773.35€ 3466.68€
          On request in weeks
          Core drill  GOLD-LINE 30 Weldon, Ø 21 mm
          51-38720.1260U21
          Core drill optimally suited for:
          • Steel < 500 N
          • Steel < 750 Nm
          • Plastics GFK / CFK

          Good for:
          • Steel < 900 N
          • Alu < 10% Si
          • Copper, brass, nickel, tin
          • cast iron

          Use possible with:
          • Steel < 1100 N
          • Alu>10% Si

          Properties of the GOLD-LINE core drills:
          HSS-XE special steel
          • Made of high-alloy HSS-XE special steel
          • Thus extreme hardness at the tooth tips (up to 68 HRC)
          • Long service life

          Step hardened HSS core drill
          • Standard hardened HSS core drills in stages
          • As a result extremely hard tooth tips (68 HRC) and still flexible core drill

          Completely sanded from the full material
          • This fine grinding increases the cutting performance while reducing friction
          • For more service life

          Gold-Tech surface treatment
          • Special treatment for longer service life

          Five cutting geometries
          • Specially adapted cutting geometries especially for the different diameters and cutting depths

          Suitable for core drills:
          Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bektop, Bux, Euroboor, Evolution, Hougen, Jancy, Magbroach, Magtron, Magnetor, Promag, Rotabroach, Ruko + Ruko Easy Lock, Universal ...
          Manufacturer
          Karnasch
          Straße des Friedens 10, 15848 Görsdorf, Germany
          www.karnasch.de

          29.55€ 36.94€
          On request in weeks
          Saw band HSS Bi-Metall, M 42  2925 x 27 x 0.9 mm, 6-10 ZpZ, 0°
          51-3357542
          Saw bands suitable for processing:


            • Structural steel
            • Deep drawing steel
            • cutting steel
            • tempering steel
            • hardened steel
            • Thick-walled pipe
            • Solid material round steel
            • Cast iron
            • pipe
            • carrier
            • bunch

            General information about bi-metal saw bands:
            The starting material of these bi-metal saw bands is a two-component material (bi-metal) obtained by electron welding. The band made of this material has a high-hardening, wear-resistant high-performance high-speed steel in the teeth, while the band body made of alloyed tempered steel is spring-hard and fatigue-proof.
            Manufacturer
            Optimum Maschinen Germany GmbH
            Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
            info@optimum-maschinen.de

            40.00€ 50.00€
            On request in weeks
            Category
                
                
                
                
                
                
                
                
                
                
                
                
                
                
                
                
                
                
                
                
                
                
                
                
                
                
                
                
                
                
                
                
                
                
                
                
                
                
                
                
                
                
                
                
                
                
                
                
                
                
            In stock
            Manufacturers
            Quality class
            Compatibility with the material
            Brand
            Set
            Drive size
            Material drilled
            Accessory attachment
            Drill type
            Tool mounting
            Drive
            Tape dimensions mm
            Color
            Update cookies preferences