Power tools, machinery

• Steel < 500 N
• Plastics GFK / CFK

• Steel < 750 Nm
• Copper, brass, nickel, tin

• Steel < 900 N
• Alu < 10% Si

• Made of high-alloy HSS-XE special steel
• Thus extreme hardness at the tooth tips (up to 68 HRC)
• Long service life

• Standard hardened HSS core drills in stages
• As a result extremely hard tooth tips (68 HRC) and still flexible core drill

• Specially adapted cutting geometries especially for the different diameters and cutting depths

The combination tooth with a positive rake angle in combination with the group set chips solid material and thick-walled profiles with particularly low vibration, increases the cutting performance and produces a smooth surface.

The specialist for:

• common steel grades up to approx. 1400 N/mm² tensile strength NF profiles
• single and bundle cuts workpieces of medium or large dimensions
• thick-walled profiles

• Steel < 500 N
• Steel < 750 Nm
• Plastics GFK / CFK

• Steel < 900 N
• Alu < 10% Si
• Copper, brass, nickel, tin
• cast iron

• Steel < 1100 N
• Alu>10% Si

• Made of high-alloy HSS-XE special steel
• Thus extreme hardness at the tooth tips (up to 68 HRC)
• Long service life

• Standard hardened HSS core drills in stages
• As a result extremely hard tooth tips (68 HRC) and still flexible core drill

• This fine grinding increases the cutting performance while reducing friction
• For more service life

• Special treatment for longer service life

• Specially adapted cutting geometries especially for the different diameters and cutting depths

• Steel < 500 N
• Steel < 750 N
• Steel < 900 N
• Alu < 10% Si
• Copper, brass, nickel, tin
• Plastics GFK / CFK

• Steel < 1100 N
• Stainless steel < 900 N
• Alu>10% Si
• cast iron

• Steel < 1400 N
• Stainless steel>900 N
• Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
• rails

• Made of high-alloy HSS-XE special steel
• Thus extreme hardness at the tooth tips (up to 68 HRC)
• Long service life

• Standard hardened HSS core drills in stages
• As a result extremely hard tooth tips (68 HRC) and still flexible core drill

• This fine grinding increases the cutting performance while reducing friction
• For more service life

• Extreme surface hardness and smoothness
• Extreme service life even under less than ideal working conditions such as overhead work, dry drilling, etc

• Specially adapted cutting geometries especially for the different diameters and cutting depths

• Steel < 500 N
• Plastics GFK / CFK

• Steel < 750 Nm
• Copper, brass, nickel, tin

• Steel < 900 N
• Alu < 10% Si

• Made of high-alloy HSS-XE special steel
• Thus extreme hardness at the tooth tips (up to 68 HRC)
• Long service life

• Standard hardened HSS core drills in stages
• As a result extremely hard tooth tips (68 HRC) and still flexible core drill

• Specially adapted cutting geometries especially for the different diameters and cutting depths

• Magnetic measuring system with magnetic tape
• For repetitive measurement tasks with high precision 0.05 mm
• Automatic switch on of the display
• Material stop for small pieces with extension
• Sliding gate right and left stop, can be folded up
• For longer breaks, the measuring system switches off and retains the last measure saved
• Measuring accuracy: ± (0.025 + 0.02 x measuring length [m])
• display: LCD
• switching functions: Display zeros, reset, directional display ±,absolute and incremental measurement function, right and left stop

• Steel < 500 N
• Steel < 750 Nm
• Plastics GFK / CFK

• Steel < 900 N
• Alu < 10% Si
• Copper, brass, nickel, tin
• cast iron

• Steel < 1100 N
• Alu>10% Si

• Made of high-alloy HSS-XE special steel
• Thus extreme hardness at the tooth tips (up to 68 HRC)
• Long service life

• Standard hardened HSS core drills in stages
• As a result extremely hard tooth tips (68 HRC) and still flexible core drill

• This fine grinding increases the cutting performance while reducing friction
• For more service life

• Special treatment for longer service life

• Specially adapted cutting geometries especially for the different diameters and cutting depths

• Steel < 500 N
• Steel < 750 Nm
• Plastics GFK / CFK

• Steel < 900 N
• Alu < 10% Si
• Copper, brass, nickel, tin
• cast iron

• Steel < 1100 N
• Alu>10% Si

• Made of high-alloy HSS-XE special steel
• Thus extreme hardness at the tooth tips (up to 68 HRC)
• Long service life

• Standard hardened HSS core drills in stages
• As a result extremely hard tooth tips (68 HRC) and still flexible core drill

• This fine grinding increases the cutting performance while reducing friction
• For more service life

• Special treatment for longer service life

• Specially adapted cutting geometries especially for the different diameters and cutting depths

• Steel < 500 N
• Steel < 750 N
• Steel < 900 N
• Alu < 10% Si
• Copper, brass, nickel, tin
• Plastics GFK / CFK

• Steel < 1100 N
• Stainless steel < 900 N
• Alu>10% Si
• cast iron

• Steel < 1400 N
• Stainless steel>900 N
• Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
• rails

• Made of high-alloy HSS-XE special steel
• Thus extreme hardness at the tooth tips (up to 68 HRC)
• Long service life

• Standard hardened HSS core drills in stages
• As a result extremely hard tooth tips (68 HRC) and still flexible core drill

• This fine grinding increases the cutting performance while reducing friction
• For more service life

• Extreme surface hardness and smoothness
• Extreme service life even under less than ideal working conditions such as overhead work, dry drilling, etc

• Specially adapted cutting geometries especially for the different diameters and cutting depths

• Steel < 500 N
• Plastics GFK / CFK

• Steel < 750 Nm
• Copper, brass, nickel, tin

• Steel < 900 N
• Alu < 10% Si

• Made of high-alloy HSS-XE special steel
• Thus extreme hardness at the tooth tips (up to 68 HRC)
• Long service life

• Standard hardened HSS core drills in stages
• As a result extremely hard tooth tips (68 HRC) and still flexible core drill

• Specially adapted cutting geometries especially for the different diameters and cutting depths

• Structural steel
• Deep drawing steel
• cutting steel
• tempering steel
• hardened steel
• Thick-walled pipe
• Solid material round steel
• Cast iron
• pipe
• carrier
• bunch

• Steel < 500 N
• Plastics GFK / CFK

• Steel < 750 Nm
• Copper, brass, nickel, tin

• Steel < 900 N
• Alu < 10% Si

• Made of high-alloy HSS-XE special steel
• Thus extreme hardness at the tooth tips (up to 68 HRC)
• Long service life

• Standard hardened HSS core drills in stages
• As a result extremely hard tooth tips (68 HRC) and still flexible core drill

• Specially adapted cutting geometries especially for the different diameters and cutting depths

• Structural steel
• Deep drawing steel
• cutting steel
• tempering steel
• hardened steel
• Thick-walled pipe
• Solid material round steel
• Solid material square
• Solid material flat steel
• Solid material bundle
• Rust and acid resistant steel
• pipe
• carrier

• Steel < 500 N
• Steel < 750 Nm
• Plastics GFK / CFK

• Steel < 900 N
• Alu < 10% Si
• Copper, brass, nickel, tin
• cast iron

• Steel < 1100 N
• Alu>10% Si

• Made of high-alloy HSS-XE special steel
• Thus extreme hardness at the tooth tips (up to 68 HRC)
• Long service life

• Standard hardened HSS core drills in stages
• As a result extremely hard tooth tips (68 HRC) and still flexible core drill

• This fine grinding increases the cutting performance while reducing friction
• For more service life

• Special treatment for longer service life

• Specially adapted cutting geometries especially for the different diameters and cutting depths

• Steel < 500 N
• Steel < 750 N
• Steel < 900 N
• Steel < 1100 N
• Stainless steel < 900 N
• Stainless steel>900 N
• Alu < 10% Si
• Alu>10% Si
• Copper, brass, nickel, tin
• Plastics GFK / CFK
• cast iron
• Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
• rails

• Steel < 1400 N

• graphite

• Made of ASP powder steel for drilling even the most difficult
  Materials such as railroad tracks, stainless steels, exotic alloys
• Always available where maximum service life is required

• Standard hardened HSS core drills in stages
• As a result extremely hard tooth tips (68 HRC) and still flexible core drill

• This fine grinding increases the cutting performance while reducing friction
• For more service life

• Extreme surface hardness and smoothness
• Extreme service life even under less than ideal working conditions such as overhead work, dry drilling, etc

• Specially adapted cutting geometries especially for the different diameters and cutting depths

• Steel < 500 N
• Steel < 750 Nm
• Plastics GFK / CFK

• Steel < 900 N
• Alu < 10% Si
• Copper, brass, nickel, tin
• cast iron

• Steel < 1100 N
• Alu>10% Si

• Made of high-alloy HSS-XE special steel
• Thus extreme hardness at the tooth tips (up to 68 HRC)
• Long service life

• Standard hardened HSS core drills in stages
• As a result extremely hard tooth tips (68 HRC) and still flexible core drill

• This fine grinding increases the cutting performance while reducing friction
• For more service life

• Special treatment for longer service life

• Specially adapted cutting geometries especially for the different diameters and cutting depths

• Steel < 500 N
• Steel < 750 N
• Steel < 900 N
• Alu < 10% Si
• Copper, brass, nickel, tin
• Plastics GFK / CFK

• Steel < 1100 N
• Stainless steel < 900 N
• Alu>10% Si
• cast iron

• Steel < 1400 N
• Stainless steel>900 N
• Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
• rails

• Made of high-alloy HSS-XE special steel
• Thus extreme hardness at the tooth tips (up to 68 HRC)
• Long service life

• Standard hardened HSS core drills in stages
• As a result extremely hard tooth tips (68 HRC) and still flexible core drill

• This fine grinding increases the cutting performance while reducing friction
• For more service life

• Extreme surface hardness and smoothness
• Extreme service life even under less than ideal working conditions such as overhead work, dry drilling, etc

• Specially adapted cutting geometries especially for the different diameters and cutting depths

• Steel < 500 N
• Steel < 750 N
• Steel < 900 N
• Alu < 10% Si
• Copper, brass, nickel, tin
• Plastics GFK / CFK

• Steel < 1100 N
• Stainless steel < 900 N
• Alu>10% Si
• cast iron

• Steel < 1400 N
• Stainless steel>900 N
• Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
• rails

• Made of high-alloy HSS-XE special steel
• Thus extreme hardness at the tooth tips (up to 68 HRC)
• Long service life

• Standard hardened HSS core drills in stages
• As a result extremely hard tooth tips (68 HRC) and still flexible core drill

• This fine grinding increases the cutting performance while reducing friction
• For more service life

• Extreme surface hardness and smoothness
• Extreme service life even under less than ideal working conditions such as overhead work, dry drilling, etc

• Specially adapted cutting geometries especially for the different diameters and cutting depths