Search

For logged in customers  up to -10%

Show prices tax inclusive
EN
All Categories
    Menu Close

    For logged in customers  up to -10%

    Power tools, machinery

    View as Grid List
    Sort by
    Display per page
    Splash guard front and side  for FSM 3060
    51-3939109

    Manufacturer
    Stürmer Maschinen GmbH
    Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
    info@stuermer-maschinen.de

    2234.48€ 2793.10€
    On request in weeks
    Core drill  HARD-LINE 55 Universal Ø 51 mm
    51-38720.131651
    Core drill optimally suited for:
    • Steel < 500 N
    • Steel < 750 N
    • Steel < 900 N
    • Steel < 1100 N
    • Steel < 1400 N
    • Stainless steel < 900 N
    • Stainless steel>900 N
    • Alu < 10% Si
    • Alu>10% Si
    • Copper, brass, nickel, tin
    • Plastics GFK / CFK
    • cast iron
    • Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
    • graphite

    Good for:
    • rails


    Properties of the carbide-tipped HARD-LINE core drills:
    Pre-Intermediate-trimmer geometry
    • manufactured in elaborate pre-middle trimmer geometry
    • Thus: vibration-free, quiet and easy cutting with maximum service life

    Conical spiral
    • Made with conical spiral
    • Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

    Sandvik carbide teeth
    • Only equipped with Sandvik carbide teeth
    • NOTE: Only the best carbide is good enough for Karnasch core drills

    Suitable for core drills:
    Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
    Manufacturer
    Karnasch
    Straße des Friedens 10, 15848 Görsdorf, Germany
    www.karnasch.de

    105.77€ 132.22€
    On request in weeks
    Core drill  HARD-LINE 55 Weldon Ø 104 mm
    51-38720.1316104
    Core drill optimally suited for:
    • Steel < 500 N
    • Steel < 750 N
    • Steel < 900 N
    • Steel < 1100 N
    • Steel < 1400 N
    • Stainless steel < 900 N
    • Stainless steel>900 N
    • Alu < 10% Si
    • Alu>10% Si
    • Copper, brass, nickel, tin
    • Plastics GFK / CFK
    • cast iron
    • Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
    • graphite

    Good for:
    • rails


    Properties of the carbide-tipped HARD-LINE core drills:
    Pre-Intermediate-trimmer geometry
    • manufactured in elaborate pre-middle trimmer geometry
    • Thus: vibration-free, quiet and easy cutting with maximum service life

    Conical spiral
    • Made with conical spiral
    • Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

    Sandvik carbide teeth
    • Only equipped with Sandvik carbide teeth
    • NOTE: Only the best carbide is good enough for Karnasch core drills

    Suitable for core drills:
    Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
    Manufacturer
    Karnasch
    Straße des Friedens 10, 15848 Görsdorf, Germany
    www.karnasch.de

    373.64€ 467.05€
    On request in weeks
    Core drill  BLUE-LINE PRO 30 Weldon, Ø 21 mm
    51-38720.128421
    Core drill optimally suited for:
    • Steel < 500 N
    • Steel < 750 N
    • Steel < 900 N
    • Steel < 1100 N
    • Stainless steel < 900 N
    • Stainless steel>900 N
    • Alu < 10% Si
    • Alu>10% Si
    • Copper, brass, nickel, tin
    • Plastics GFK / CFK
    • cast iron
    • Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
    • rails

    Good for:
    • Steel < 1400 N

    Use possible with:
    • graphite


    Characteristics of BLUE-LINE core drills:
    ASP powder steel
    • Made of ASP powder steel for drilling even the most difficult
      Materials such as railroad tracks, stainless steels, exotic alloys
    • Always available where maximum service life is required

    Step hardened HSS core drill
    • Standard hardened HSS core drills in stages
    • As a result extremely hard tooth tips (68 HRC) and still flexible core drill

    Completely sanded from the full material
    • This fine grinding increases the cutting performance while reducing friction
    • For more service life

    unique and patented Durablue coating
    • Extreme surface hardness and smoothness
    • Extreme service life even under less than ideal working conditions such as overhead work, dry drilling, etc

    Five cutting geometries
    • Specially adapted cutting geometries especially for the different diameters and cutting depths

    Suitable for core drills:
    Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
    Manufacturer
    Karnasch
    Straße des Friedens 10, 15848 Görsdorf, Germany
    www.karnasch.de

    81.10€ 101.37€
    On request in weeks
    Core drill  HARD-LINE 80 Weldon Ø 21 mm
    51-38720.165021
    Core drill optimally suited for:
    • Steel < 500 N
    • Steel < 750 N
    • Steel < 900 N
    • Steel < 1100 N
    • Steel < 1400 N
    • Stainless steel < 900 N
    • Stainless steel>900 N
    • Alu < 10% Si
    • Alu>10% Si
    • Copper, brass, nickel, tin
    • Plastics GFK / CFK
    • cast iron
    • Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
    • graphite

    Good for:
    • rails


    Properties of the carbide-tipped HARD-LINE core drills:
    Pre-Intermediate-trimmer geometry
    • manufactured in elaborate pre-middle trimmer geometry
    • Thus: vibration-free, quiet and easy cutting with maximum service life

    Conical spiral
    • Made with conical spiral
    • Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

    Sandvik carbide teeth
    • Only equipped with Sandvik carbide teeth
    • NOTE: Only the best carbide is good enough for Karnasch core drills

    Suitable for core drills:
    Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
    Manufacturer
    Karnasch
    Straße des Friedens 10, 15848 Görsdorf, Germany
    www.karnasch.de

    73.56€ 91.95€
    On request in weeks
    Core drill  HARD-LINE 80 Weldon Ø 26 mm
    51-38720.165026
    Core drill optimally suited for:
    • Steel < 500 N
    • Steel < 750 N
    • Steel < 900 N
    • Steel < 1100 N
    • Steel < 1400 N
    • Stainless steel < 900 N
    • Stainless steel>900 N
    • Alu < 10% Si
    • Alu>10% Si
    • Copper, brass, nickel, tin
    • Plastics GFK / CFK
    • cast iron
    • Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
    • graphite

    Good for:
    • rails


    Properties of the carbide-tipped HARD-LINE core drills:
    Pre-Intermediate-trimmer geometry
    • manufactured in elaborate pre-middle trimmer geometry
    • Thus: vibration-free, quiet and easy cutting with maximum service life

    Conical spiral
    • Made with conical spiral
    • Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

    Sandvik carbide teeth
    • Only equipped with Sandvik carbide teeth
    • NOTE: Only the best carbide is good enough for Karnasch core drills

    Suitable for core drills:
    Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
    Manufacturer
    Karnasch
    Straße des Friedens 10, 15848 Görsdorf, Germany
    www.karnasch.de

    80.22€ 100.27€
    On request in weeks
    Core drill  HARD-LINE 55 Weldon Ø 106 mm
    51-38720.1316106
    Core drill optimally suited for:
    • Steel < 500 N
    • Steel < 750 N
    • Steel < 900 N
    • Steel < 1100 N
    • Steel < 1400 N
    • Stainless steel < 900 N
    • Stainless steel>900 N
    • Alu < 10% Si
    • Alu>10% Si
    • Copper, brass, nickel, tin
    • Plastics GFK / CFK
    • cast iron
    • Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
    • graphite

    Good for:
    • rails


    Properties of the carbide-tipped HARD-LINE core drills:
    Pre-Intermediate-trimmer geometry
    • manufactured in elaborate pre-middle trimmer geometry
    • Thus: vibration-free, quiet and easy cutting with maximum service life

    Conical spiral
    • Made with conical spiral
    • Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

    Sandvik carbide teeth
    • Only equipped with Sandvik carbide teeth
    • NOTE: Only the best carbide is good enough for Karnasch core drills

    Suitable for core drills:
    Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
    Manufacturer
    Karnasch
    Straße des Friedens 10, 15848 Görsdorf, Germany
    www.karnasch.de

    243.97€ 304.97€
    On request in weeks
    Core drill  HARD-LINE 80 Weldon Ø 35 mm
    51-38720.165035
    Core drill optimally suited for:
    • Steel < 500 N
    • Steel < 750 N
    • Steel < 900 N
    • Steel < 1100 N
    • Steel < 1400 N
    • Stainless steel < 900 N
    • Stainless steel>900 N
    • Alu < 10% Si
    • Alu>10% Si
    • Copper, brass, nickel, tin
    • Plastics GFK / CFK
    • cast iron
    • Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
    • graphite

    Good for:
    • rails


    Properties of the carbide-tipped HARD-LINE core drills:
    Pre-Intermediate-trimmer geometry
    • manufactured in elaborate pre-middle trimmer geometry
    • Thus: vibration-free, quiet and easy cutting with maximum service life

    Conical spiral
    • Made with conical spiral
    • Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

    Sandvik carbide teeth
    • Only equipped with Sandvik carbide teeth
    • NOTE: Only the best carbide is good enough for Karnasch core drills

    Suitable for core drills:
    Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
    Manufacturer
    Karnasch
    Straße des Friedens 10, 15848 Görsdorf, Germany
    www.karnasch.de

    96.88€ 121.10€
    On request in weeks
    Core drill  HARD-LINE 55 Universal Ø 58 mm
    51-38720.131658
    Core drill optimally suited for:
    • Steel < 500 N
    • Steel < 750 N
    • Steel < 900 N
    • Steel < 1100 N
    • Steel < 1400 N
    • Stainless steel < 900 N
    • Stainless steel>900 N
    • Alu < 10% Si
    • Alu>10% Si
    • Copper, brass, nickel, tin
    • Plastics GFK / CFK
    • cast iron
    • Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
    • graphite

    Good for:
    • rails


    Properties of the carbide-tipped HARD-LINE core drills:
    Pre-Intermediate-trimmer geometry
    • manufactured in elaborate pre-middle trimmer geometry
    • Thus: vibration-free, quiet and easy cutting with maximum service life

    Conical spiral
    • Made with conical spiral
    • Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

    Sandvik carbide teeth
    • Only equipped with Sandvik carbide teeth
    • NOTE: Only the best carbide is good enough for Karnasch core drills

    Suitable for core drills:
    Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
    Manufacturer
    Karnasch
    Straße des Friedens 10, 15848 Görsdorf, Germany
    www.karnasch.de

    127.10€ 158.88€
    On request in weeks
    Core drill  HARD-LINE 40 Universal, Ø 47 mm
    51-38720.131547
    Core drill optimally suited for:
    • Steel < 500 N
    • Steel < 750 N
    • Steel < 900 N
    • Steel < 1100 N
    • Steel < 1400 N
    • Stainless steel < 900 N
    • Stainless steel>900 N
    • Alu < 10% Si
    • Alu>10% Si
    • Copper, brass, nickel, tin
    • Plastics GFK / CFK
    • cast iron
    • Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
    • graphite

    Good for:
    • rails


    Properties of the carbide-tipped HARD-LINE core drills:
    Pre-Intermediate-trimmer geometry
    • manufactured in elaborate pre-middle trimmer geometry
    • Thus: vibration-free, quiet and easy cutting with maximum service life

    Conical spiral
    • Made with conical spiral
    • Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

    Sandvik carbide teeth
    • Only equipped with Sandvik carbide teeth
    • NOTE: Only the best carbide is good enough for Karnasch core drills

    Suitable for core drills:
    Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
    Manufacturer
    Karnasch
    Straße des Friedens 10, 15848 Görsdorf, Germany
    www.karnasch.de

    83.10€ 103.87€
    On request in weeks
    Core drill  HARD-LINE 55 Weldon Ø 70 mm
    51-38720.131670
    Core drill optimally suited for:
    • Steel < 500 N
    • Steel < 750 N
    • Steel < 900 N
    • Steel < 1100 N
    • Steel < 1400 N
    • Stainless steel < 900 N
    • Stainless steel>900 N
    • Alu < 10% Si
    • Alu>10% Si
    • Copper, brass, nickel, tin
    • Plastics GFK / CFK
    • cast iron
    • Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
    • graphite

    Good for:
    • rails


    Properties of the carbide-tipped HARD-LINE core drills:
    Pre-Intermediate-trimmer geometry
    • manufactured in elaborate pre-middle trimmer geometry
    • Thus: vibration-free, quiet and easy cutting with maximum service life

    Conical spiral
    • Made with conical spiral
    • Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

    Sandvik carbide teeth
    • Only equipped with Sandvik carbide teeth
    • NOTE: Only the best carbide is good enough for Karnasch core drills

    Suitable for core drills:
    Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
    Manufacturer
    Karnasch
    Straße des Friedens 10, 15848 Görsdorf, Germany
    www.karnasch.de

    175.66€ 219.57€
    On request in weeks
    Thermo drill THERMDRILL CUT M12 long
    51-3060152
    Thermdrill replaces rivet nuts

    With the Thermdrill process, you can easily create 100% torsion-proof and wobble-free threaded bushes from the existing material in just two steps. And at a fraction of the cost of rivet nuts.
    • 100% torsion-proof
    • For steel, VA, non-ferrous metal, aluminum
    • For all common thread sizes
    • From 1.0 mm wall thickness
    • For pillar drills, milling machines and CNC (assuming sufficient speed and motor power)

    Manufacturer
    ONTOOL GmbH
    Franz-Gruber-Platz 13, 64859 Eppertshausen, Germany
    www.ontool.eu

    204.67€ 255.84€
    On request in weeks
    Core drill  HARD-LINE 40 Universal, Ø 50 mm
    51-38720.131550
    Core drill optimally suited for:
    • Steel < 500 N
    • Steel < 750 N
    • Steel < 900 N
    • Steel < 1100 N
    • Steel < 1400 N
    • Stainless steel < 900 N
    • Stainless steel>900 N
    • Alu < 10% Si
    • Alu>10% Si
    • Copper, brass, nickel, tin
    • Plastics GFK / CFK
    • cast iron
    • Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
    • graphite

    Good for:
    • rails


    Properties of the carbide-tipped HARD-LINE core drills:
    Pre-Intermediate-trimmer geometry
    • manufactured in elaborate pre-middle trimmer geometry
    • Thus: vibration-free, quiet and easy cutting with maximum service life

    Conical spiral
    • Made with conical spiral
    • Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

    Sandvik carbide teeth
    • Only equipped with Sandvik carbide teeth
    • NOTE: Only the best carbide is good enough for Karnasch core drills

    Suitable for core drills:
    Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
    Manufacturer
    Karnasch
    Straße des Friedens 10, 15848 Görsdorf, Germany
    www.karnasch.de

    87.99€ 109.99€
    On request in weeks
    Core drill  HARD-LINE 55 Weldon Ø 88 mm
    51-38720.131688
    Core drill optimally suited for:
    • Steel < 500 N
    • Steel < 750 N
    • Steel < 900 N
    • Steel < 1100 N
    • Steel < 1400 N
    • Stainless steel < 900 N
    • Stainless steel>900 N
    • Alu < 10% Si
    • Alu>10% Si
    • Copper, brass, nickel, tin
    • Plastics GFK / CFK
    • cast iron
    • Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
    • graphite

    Good for:
    • rails


    Properties of the carbide-tipped HARD-LINE core drills:
    Pre-Intermediate-trimmer geometry
    • manufactured in elaborate pre-middle trimmer geometry
    • Thus: vibration-free, quiet and easy cutting with maximum service life

    Conical spiral
    • Made with conical spiral
    • Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

    Sandvik carbide teeth
    • Only equipped with Sandvik carbide teeth
    • NOTE: Only the best carbide is good enough for Karnasch core drills

    Suitable for core drills:
    Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
    Manufacturer
    Karnasch
    Straße des Friedens 10, 15848 Görsdorf, Germany
    www.karnasch.de

    247.32€ 309.14€
    On request in weeks
    Core drill  HARD-LINE 40 Universal, Ø 13 mm
    51-38720.131513
    Core drill optimally suited for:
    • Steel < 500 N
    • Steel < 750 N
    • Steel < 900 N
    • Steel < 1100 N
    • Steel < 1400 N
    • Stainless steel < 900 N
    • Stainless steel>900 N
    • Alu < 10% Si
    • Alu>10% Si
    • Copper, brass, nickel, tin
    • Plastics GFK / CFK
    • cast iron
    • Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
    • graphite

    Good for:
    • rails


    Properties of the carbide-tipped HARD-LINE core drills:
    Pre-Intermediate-trimmer geometry
    • manufactured in elaborate pre-middle trimmer geometry
    • Thus: vibration-free, quiet and easy cutting with maximum service life

    Conical spiral
    • Made with conical spiral
    • Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

    Sandvik carbide teeth
    • Only equipped with Sandvik carbide teeth
    • NOTE: Only the best carbide is good enough for Karnasch core drills

    Suitable for core drills:
    Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
    Manufacturer
    Karnasch
    Straße des Friedens 10, 15848 Görsdorf, Germany
    www.karnasch.de

    42.43€ 53.05€
    On request in weeks
    Core drill  BLUE-LINE PRO 30 Weldon, Ø 27 mm
    51-38720.128427
    Core drill optimally suited for:
    • Steel < 500 N
    • Steel < 750 N
    • Steel < 900 N
    • Steel < 1100 N
    • Stainless steel < 900 N
    • Stainless steel>900 N
    • Alu < 10% Si
    • Alu>10% Si
    • Copper, brass, nickel, tin
    • Plastics GFK / CFK
    • cast iron
    • Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
    • rails

    Good for:
    • Steel < 1400 N

    Use possible with:
    • graphite


    Characteristics of BLUE-LINE core drills:
    ASP powder steel
    • Made of ASP powder steel for drilling even the most difficult
      Materials such as railroad tracks, stainless steels, exotic alloys
    • Always available where maximum service life is required

    Step hardened HSS core drill
    • Standard hardened HSS core drills in stages
    • As a result extremely hard tooth tips (68 HRC) and still flexible core drill

    Completely sanded from the full material
    • This fine grinding increases the cutting performance while reducing friction
    • For more service life

    unique and patented Durablue coating
    • Extreme surface hardness and smoothness
    • Extreme service life even under less than ideal working conditions such as overhead work, dry drilling, etc

    Five cutting geometries
    • Specially adapted cutting geometries especially for the different diameters and cutting depths

    Suitable for core drills:
    Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
    Manufacturer
    Karnasch
    Straße des Friedens 10, 15848 Görsdorf, Germany
    www.karnasch.de

    108.55€ 135.69€
    On request in weeks
    Core drill  HARD-LINE 55 Universal Ø 23 mm
    51-38720.131623
    Core drill optimally suited for:
    • Steel < 500 N
    • Steel < 750 N
    • Steel < 900 N
    • Steel < 1100 N
    • Steel < 1400 N
    • Stainless steel < 900 N
    • Stainless steel>900 N
    • Alu < 10% Si
    • Alu>10% Si
    • Copper, brass, nickel, tin
    • Plastics GFK / CFK
    • cast iron
    • Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
    • graphite

    Good for:
    • rails


    Properties of the carbide-tipped HARD-LINE core drills:
    Pre-Intermediate-trimmer geometry
    • manufactured in elaborate pre-middle trimmer geometry
    • Thus: vibration-free, quiet and easy cutting with maximum service life

    Conical spiral
    • Made with conical spiral
    • Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

    Sandvik carbide teeth
    • Only equipped with Sandvik carbide teeth
    • NOTE: Only the best carbide is good enough for Karnasch core drills

    Suitable for core drills:
    Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
    Manufacturer
    Karnasch
    Straße des Friedens 10, 15848 Görsdorf, Germany
    www.karnasch.de

    49.89€ 62.36€
    On request in weeks
    Scotch Brite brush  Ø200 Medium 120
    51-4418016

    Manufacturer
    Stürmer Maschinen GmbH
    Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
    info@stuermer-maschinen.de

    591.95€ 739.93€
    On request in weeks
    Core drill  BLUE-LINE PRO 30 Weldon, Ø 14 mm
    51-38720.128414
    Core drill optimally suited for:
    • Steel < 500 N
    • Steel < 750 N
    • Steel < 900 N
    • Steel < 1100 N
    • Stainless steel < 900 N
    • Stainless steel>900 N
    • Alu < 10% Si
    • Alu>10% Si
    • Copper, brass, nickel, tin
    • Plastics GFK / CFK
    • cast iron
    • Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
    • rails

    Good for:
    • Steel < 1400 N

    Use possible with:
    • graphite


    Characteristics of BLUE-LINE core drills:
    ASP powder steel
    • Made of ASP powder steel for drilling even the most difficult
      Materials such as railroad tracks, stainless steels, exotic alloys
    • Always available where maximum service life is required

    Step hardened HSS core drill
    • Standard hardened HSS core drills in stages
    • As a result extremely hard tooth tips (68 HRC) and still flexible core drill

    Completely sanded from the full material
    • This fine grinding increases the cutting performance while reducing friction
    • For more service life

    unique and patented Durablue coating
    • Extreme surface hardness and smoothness
    • Extreme service life even under less than ideal working conditions such as overhead work, dry drilling, etc

    Five cutting geometries
    • Specially adapted cutting geometries especially for the different diameters and cutting depths

    Suitable for core drills:
    Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
    Manufacturer
    Karnasch
    Straße des Friedens 10, 15848 Görsdorf, Germany
    www.karnasch.de

    70.78€ 88.47€
    On request in weeks
    Core drill  HARD-LINE 110 Weldon Ø 39 mm
    51-38720.166039
    Core drill optimally suited for:
    • Steel < 500 N
    • Steel < 750 N
    • Steel < 900 N
    • Steel < 1100 N
    • Steel < 1400 N
    • Stainless steel < 900 N
    • Stainless steel>900 N
    • Alu < 10% Si
    • Alu>10% Si
    • Copper, brass, nickel, tin
    • Plastics GFK / CFK
    • cast iron
    • Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
    • graphite

    Good for:
    • rails


    Properties of the carbide-tipped HARD-LINE core drills:
    Pre-Intermediate-trimmer geometry
    • manufactured in elaborate pre-middle trimmer geometry
    • Thus: vibration-free, quiet and easy cutting with maximum service life

    Conical spiral
    • Made with conical spiral
    • Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

    Sandvik carbide teeth
    • Only equipped with Sandvik carbide teeth
    • NOTE: Only the best carbide is good enough for Karnasch core drills

    Suitable for core drills:
    Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
    Manufacturer
    Karnasch
    Straße des Friedens 10, 15848 Görsdorf, Germany
    www.karnasch.de

    122.50€ 153.13€
    On request in weeks
    Category
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
    In stock
    Manufacturers
    Quality class
    Compatibility with the material
    Brand
    Set
    Drive size
    Material drilled
    Accessory attachment
    Drill type
    Tool mounting
    Drive
    Tape dimensions mm
    Color
    Update cookies preferences