Search

For logged in customers  up to -10%

Show prices tax inclusive
EN
All Categories
    Menu Close

    For logged in customers  up to -10%

    Power tools, machinery

    View as Grid List
    Sort by
    Display per page
    Core drill  HARD-LINE 110 Weldon Ø 19 mm
    51-38720.166019
    Core drill optimally suited for:
    • Steel < 500 N
    • Steel < 750 N
    • Steel < 900 N
    • Steel < 1100 N
    • Steel < 1400 N
    • Stainless steel < 900 N
    • Stainless steel>900 N
    • Alu < 10% Si
    • Alu>10% Si
    • Copper, brass, nickel, tin
    • Plastics GFK / CFK
    • cast iron
    • Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
    • graphite

    Good for:
    • rails


    Properties of the carbide-tipped HARD-LINE core drills:
    Pre-Intermediate-trimmer geometry
    • manufactured in elaborate pre-middle trimmer geometry
    • Thus: vibration-free, quiet and easy cutting with maximum service life

    Conical spiral
    • Made with conical spiral
    • Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

    Sandvik carbide teeth
    • Only equipped with Sandvik carbide teeth
    • NOTE: Only the best carbide is good enough for Karnasch core drills

    Suitable for core drills:
    Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
    Manufacturer
    Karnasch
    Straße des Friedens 10, 15848 Görsdorf, Germany
    www.karnasch.de

    93.77€ 117.22€
    On request in weeks
    Workpiece support  for BSM 75
    51-3357881
    • Workpiece support suitable for belt sander OPTIgrind BSM 75
    • infinitely adjustable
    • allows quick sanding

    Manufacturer
    Optimum Maschinen Germany GmbH
    Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
    info@optimum-maschinen.de

    23.81€ 29.76€
    On request in weeks
    Core drill  HARD-LINE 40 Universal, Ø 27 mm
    51-38720.131527
    Core drill optimally suited for:
    • Steel < 500 N
    • Steel < 750 N
    • Steel < 900 N
    • Steel < 1100 N
    • Steel < 1400 N
    • Stainless steel < 900 N
    • Stainless steel>900 N
    • Alu < 10% Si
    • Alu>10% Si
    • Copper, brass, nickel, tin
    • Plastics GFK / CFK
    • cast iron
    • Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
    • graphite

    Good for:
    • rails


    Properties of the carbide-tipped HARD-LINE core drills:
    Pre-Intermediate-trimmer geometry
    • manufactured in elaborate pre-middle trimmer geometry
    • Thus: vibration-free, quiet and easy cutting with maximum service life

    Conical spiral
    • Made with conical spiral
    • Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

    Sandvik carbide teeth
    • Only equipped with Sandvik carbide teeth
    • NOTE: Only the best carbide is good enough for Karnasch core drills

    Suitable for core drills:
    Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
    Manufacturer
    Karnasch
    Straße des Friedens 10, 15848 Görsdorf, Germany
    www.karnasch.de

    47.44€ 59.31€
    On request in weeks
    Core drill  BLPRO55WLDM33MM
    51-38720.131733
    Core drill optimally suited for:
    • Steel < 500 N
    • Steel < 750 N
    • Steel < 900 N
    • Steel < 1100 N
    • Stainless steel < 900 N
    • Stainless steel>900 N
    • Alu < 10% Si
    • Alu>10% Si
    • Copper, brass, nickel, tin
    • Plastics GFK / CFK
    • cast iron
    • Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
    • rails

    Good for:
    • Steel < 1400 N

    Use possible with:
    • graphite


    Characteristics of BLUE-LINE core drills:
    ASP powder steel
    • Made of ASP powder steel for drilling even the most difficult
      Materials such as railroad tracks, stainless steels, exotic alloys
    • Always available where maximum service life is required

    Step hardened HSS core drill
    • Standard hardened HSS core drills in stages
    • As a result extremely hard tooth tips (68 HRC) and still flexible core drill

    Completely sanded from the full material
    • This fine grinding increases the cutting performance while reducing friction
    • For more service life

    unique and patented Durablue coating
    • Extreme surface hardness and smoothness
    • Extreme service life even under less than ideal working conditions such as overhead work, dry drilling, etc

    Five cutting geometries
    • Specially adapted cutting geometries especially for the different diameters and cutting depths

    Suitable for core drills:
    Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
    Manufacturer
    Karnasch
    Straße des Friedens 10, 15848 Görsdorf, Germany
    www.karnasch.de

    90.89€ 113.61€
    On request in weeks
    Thermo drill + thread former THERMDRILL Thread Tool Set FORM M6 short
    51-3060506
    Thermdrill replaces rivet nuts

    With the Thermdrill process, you can easily create 100% torsion-proof and wobble-free threaded bushes from the existing material in just two steps. And at a fraction of the cost of rivet nuts.
    • 100% torsion-proof
    • For steel, VA, non-ferrous metal, aluminum
    • For all common thread sizes
    • From 1.0 mm wall thickness
    • For pillar drills, milling machines and CNC (assuming sufficient speed and motor power)

    Manufacturer
    ONTOOL GmbH
    Franz-Gruber-Platz 13, 64859 Eppertshausen, Germany
    www.ontool.eu

    116.45€ 145.56€
    On request in weeks
    Core drill  HARD-LINE 55 Weldon Ø 66 mm
    51-38720.131666
    Core drill optimally suited for:
    • Steel < 500 N
    • Steel < 750 N
    • Steel < 900 N
    • Steel < 1100 N
    • Steel < 1400 N
    • Stainless steel < 900 N
    • Stainless steel>900 N
    • Alu < 10% Si
    • Alu>10% Si
    • Copper, brass, nickel, tin
    • Plastics GFK / CFK
    • cast iron
    • Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
    • graphite

    Good for:
    • rails


    Properties of the carbide-tipped HARD-LINE core drills:
    Pre-Intermediate-trimmer geometry
    • manufactured in elaborate pre-middle trimmer geometry
    • Thus: vibration-free, quiet and easy cutting with maximum service life

    Conical spiral
    • Made with conical spiral
    • Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

    Sandvik carbide teeth
    • Only equipped with Sandvik carbide teeth
    • NOTE: Only the best carbide is good enough for Karnasch core drills

    Suitable for core drills:
    Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
    Manufacturer
    Karnasch
    Straße des Friedens 10, 15848 Görsdorf, Germany
    www.karnasch.de

    161.21€ 201.51€
    On request in weeks
    Core drill  HARD-LINE 55 Weldon Ø 108 mm
    51-38720.1316108
    Core drill optimally suited for:
    • Steel < 500 N
    • Steel < 750 N
    • Steel < 900 N
    • Steel < 1100 N
    • Steel < 1400 N
    • Stainless steel < 900 N
    • Stainless steel>900 N
    • Alu < 10% Si
    • Alu>10% Si
    • Copper, brass, nickel, tin
    • Plastics GFK / CFK
    • cast iron
    • Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
    • graphite

    Good for:
    • rails


    Properties of the carbide-tipped HARD-LINE core drills:
    Pre-Intermediate-trimmer geometry
    • manufactured in elaborate pre-middle trimmer geometry
    • Thus: vibration-free, quiet and easy cutting with maximum service life

    Conical spiral
    • Made with conical spiral
    • Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

    Sandvik carbide teeth
    • Only equipped with Sandvik carbide teeth
    • NOTE: Only the best carbide is good enough for Karnasch core drills

    Suitable for core drills:
    Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
    Manufacturer
    Karnasch
    Straße des Friedens 10, 15848 Görsdorf, Germany
    www.karnasch.de

    416.09€ 520.12€
    On request in weeks
    Dust bag
    51-3922002
    • Dust bag for suction AS 1600

    Manufacturer
    Stürmer Maschinen GmbH
    Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
    info@stuermer-maschinen.de

    52.84€ 58.58€
    On request in weeks
    Thermo drill THERMDRILL FORM M10 long
    51-3060130
    Thermdrill replaces rivet nuts

    With the Thermdrill process, you can easily create 100% torsion-proof and wobble-free threaded bushes from the existing material in just two steps. And at a fraction of the cost of rivet nuts.
    • 100% torsion-proof
    • For steel, VA, non-ferrous metal, aluminum
    • For all common thread sizes
    • From 1.0 mm wall thickness
    • For pillar drills, milling machines and CNC (assuming sufficient speed and motor power)

    Manufacturer
    ONTOOL GmbH
    Franz-Gruber-Platz 13, 64859 Eppertshausen, Germany
    www.ontool.eu

    143.49€ 179.37€
    On request in weeks
    Thermo drill THERMDRILL CUT M5 long
    51-3060145
    Thermdrill replaces rivet nuts

    With the Thermdrill process, you can easily create 100% torsion-proof and wobble-free threaded bushes from the existing material in just two steps. And at a fraction of the cost of rivet nuts.
    • 100% torsion-proof
    • For steel, VA, non-ferrous metal, aluminum
    • For all common thread sizes
    • From 1.0 mm wall thickness
    • For pillar drills, milling machines and CNC (assuming sufficient speed and motor power)

    Manufacturer
    ONTOOL GmbH
    Franz-Gruber-Platz 13, 64859 Eppertshausen, Germany
    www.ontool.eu

    124.67€ 155.84€
    On request in weeks
    Core drill  HARD-LINE 55 Universal Ø 16 mm
    51-38720.131616
    Core drill optimally suited for:
    • Steel < 500 N
    • Steel < 750 N
    • Steel < 900 N
    • Steel < 1100 N
    • Steel < 1400 N
    • Stainless steel < 900 N
    • Stainless steel>900 N
    • Alu < 10% Si
    • Alu>10% Si
    • Copper, brass, nickel, tin
    • Plastics GFK / CFK
    • cast iron
    • Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
    • graphite

    Good for:
    • rails


    Properties of the carbide-tipped HARD-LINE core drills:
    Pre-Intermediate-trimmer geometry
    • manufactured in elaborate pre-middle trimmer geometry
    • Thus: vibration-free, quiet and easy cutting with maximum service life

    Conical spiral
    • Made with conical spiral
    • Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

    Sandvik carbide teeth
    • Only equipped with Sandvik carbide teeth
    • NOTE: Only the best carbide is good enough for Karnasch core drills

    Suitable for core drills:
    Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
    Manufacturer
    Karnasch
    Straße des Friedens 10, 15848 Görsdorf, Germany
    www.karnasch.de

    48.34€ 60.41€
    On request in weeks
    Core drill  HARD-LINE 80 Weldon Ø 27 mm
    51-38720.165027
    Core drill optimally suited for:
    • Steel < 500 N
    • Steel < 750 N
    • Steel < 900 N
    • Steel < 1100 N
    • Steel < 1400 N
    • Stainless steel < 900 N
    • Stainless steel>900 N
    • Alu < 10% Si
    • Alu>10% Si
    • Copper, brass, nickel, tin
    • Plastics GFK / CFK
    • cast iron
    • Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
    • graphite

    Good for:
    • rails


    Properties of the carbide-tipped HARD-LINE core drills:
    Pre-Intermediate-trimmer geometry
    • manufactured in elaborate pre-middle trimmer geometry
    • Thus: vibration-free, quiet and easy cutting with maximum service life

    Conical spiral
    • Made with conical spiral
    • Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

    Sandvik carbide teeth
    • Only equipped with Sandvik carbide teeth
    • NOTE: Only the best carbide is good enough for Karnasch core drills

    Suitable for core drills:
    Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
    Manufacturer
    Karnasch
    Straße des Friedens 10, 15848 Görsdorf, Germany
    www.karnasch.de

    80.22€ 100.27€
    On request in weeks
    Core drill  HARD-LINE 55 Universal Ø 15 mm
    51-38720.131615
    Core drill optimally suited for:
    • Steel < 500 N
    • Steel < 750 N
    • Steel < 900 N
    • Steel < 1100 N
    • Steel < 1400 N
    • Stainless steel < 900 N
    • Stainless steel>900 N
    • Alu < 10% Si
    • Alu>10% Si
    • Copper, brass, nickel, tin
    • Plastics GFK / CFK
    • cast iron
    • Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
    • graphite

    Good for:
    • rails


    Properties of the carbide-tipped HARD-LINE core drills:
    Pre-Intermediate-trimmer geometry
    • manufactured in elaborate pre-middle trimmer geometry
    • Thus: vibration-free, quiet and easy cutting with maximum service life

    Conical spiral
    • Made with conical spiral
    • Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

    Sandvik carbide teeth
    • Only equipped with Sandvik carbide teeth
    • NOTE: Only the best carbide is good enough for Karnasch core drills

    Suitable for core drills:
    Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
    Manufacturer
    Karnasch
    Straße des Friedens 10, 15848 Görsdorf, Germany
    www.karnasch.de

    48.34€ 60.41€
    On request in weeks
    Fine adjustment for crossfeed  for FSM 4080
    51-3939205

    Manufacturer
    Stürmer Maschinen GmbH
    Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
    info@stuermer-maschinen.de

    1010.97€ 1263.71€
    On request in weeks
    Core drill  HARD-LINE 80 Weldon Ø 85 mm
    51-38720.165085
    Core drill optimally suited for:
    • Steel < 500 N
    • Steel < 750 N
    • Steel < 900 N
    • Steel < 1100 N
    • Steel < 1400 N
    • Stainless steel < 900 N
    • Stainless steel>900 N
    • Alu < 10% Si
    • Alu>10% Si
    • Copper, brass, nickel, tin
    • Plastics GFK / CFK
    • cast iron
    • Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
    • graphite

    Good for:
    • rails


    Properties of the carbide-tipped HARD-LINE core drills:
    Pre-Intermediate-trimmer geometry
    • manufactured in elaborate pre-middle trimmer geometry
    • Thus: vibration-free, quiet and easy cutting with maximum service life

    Conical spiral
    • Made with conical spiral
    • Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

    Sandvik carbide teeth
    • Only equipped with Sandvik carbide teeth
    • NOTE: Only the best carbide is good enough for Karnasch core drills

    Suitable for core drills:
    Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
    Manufacturer
    Karnasch
    Straße des Friedens 10, 15848 Görsdorf, Germany
    www.karnasch.de

    318.97€ 398.71€
    On request in weeks
    Core drill set  BLUE-LINE PRO 30 Weldon
    51-38720.1331
    Core drill optimally suited for:
    • Steel < 500 N
    • Steel < 750 N
    • Steel < 900 N
    • Steel < 1100 N
    • Stainless steel < 900 N
    • Stainless steel>900 N
    • Alu < 10% Si
    • Alu>10% Si
    • Copper, brass, nickel, tin
    • Plastics GFK / CFK
    • cast iron
    • Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
    • rails

    Good for:
    • Steel < 1400 N

    Use possible with:
    • graphite


    Characteristics of BLUE-LINE core drills:
    ASP powder steel
    • Made of ASP powder steel for drilling even the most difficult
      Materials such as railroad tracks, stainless steels, exotic alloys
    • Always available where maximum service life is required

    Step hardened HSS core drill
    • Standard hardened HSS core drills in stages
    • As a result extremely hard tooth tips (68 HRC) and still flexible core drill

    Completely sanded from the full material
    • This fine grinding increases the cutting performance while reducing friction
    • For more service life

    unique and patented Durablue coating
    • Extreme surface hardness and smoothness
    • Extreme service life even under less than ideal working conditions such as overhead work, dry drilling, etc

    Five cutting geometries
    • Specially adapted cutting geometries especially for the different diameters and cutting depths

    Suitable for core drills:
    Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
    Manufacturer
    Karnasch
    Straße des Friedens 10, 15848 Görsdorf, Germany
    www.karnasch.de

    518.74€ 648.43€
    On request in weeks
    Core drill  HARD-LINE 55 Weldon Ø 69 mm
    51-38720.131669
    Core drill optimally suited for:
    • Steel < 500 N
    • Steel < 750 N
    • Steel < 900 N
    • Steel < 1100 N
    • Steel < 1400 N
    • Stainless steel < 900 N
    • Stainless steel>900 N
    • Alu < 10% Si
    • Alu>10% Si
    • Copper, brass, nickel, tin
    • Plastics GFK / CFK
    • cast iron
    • Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
    • graphite

    Good for:
    • rails


    Properties of the carbide-tipped HARD-LINE core drills:
    Pre-Intermediate-trimmer geometry
    • manufactured in elaborate pre-middle trimmer geometry
    • Thus: vibration-free, quiet and easy cutting with maximum service life

    Conical spiral
    • Made with conical spiral
    • Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

    Sandvik carbide teeth
    • Only equipped with Sandvik carbide teeth
    • NOTE: Only the best carbide is good enough for Karnasch core drills

    Suitable for core drills:
    Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
    Manufacturer
    Karnasch
    Straße des Friedens 10, 15848 Görsdorf, Germany
    www.karnasch.de

    170.66€ 213.33€
    On request in weeks
    Core drill  HARD-LINE 110 Weldon Ø 26 mm
    51-38720.166026
    Core drill optimally suited for:
    • Steel < 500 N
    • Steel < 750 N
    • Steel < 900 N
    • Steel < 1100 N
    • Steel < 1400 N
    • Stainless steel < 900 N
    • Stainless steel>900 N
    • Alu < 10% Si
    • Alu>10% Si
    • Copper, brass, nickel, tin
    • Plastics GFK / CFK
    • cast iron
    • Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
    • graphite

    Good for:
    • rails


    Properties of the carbide-tipped HARD-LINE core drills:
    Pre-Intermediate-trimmer geometry
    • manufactured in elaborate pre-middle trimmer geometry
    • Thus: vibration-free, quiet and easy cutting with maximum service life

    Conical spiral
    • Made with conical spiral
    • Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

    Sandvik carbide teeth
    • Only equipped with Sandvik carbide teeth
    • NOTE: Only the best carbide is good enough for Karnasch core drills

    Suitable for core drills:
    Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
    Manufacturer
    Karnasch
    Straße des Friedens 10, 15848 Görsdorf, Germany
    www.karnasch.de

    102.00€ 127.50€
    On request in weeks
    Core drill  HARD-LINE 55 Weldon Ø 84 mm
    51-38720.131684
    Core drill optimally suited for:
    • Steel < 500 N
    • Steel < 750 N
    • Steel < 900 N
    • Steel < 1100 N
    • Steel < 1400 N
    • Stainless steel < 900 N
    • Stainless steel>900 N
    • Alu < 10% Si
    • Alu>10% Si
    • Copper, brass, nickel, tin
    • Plastics GFK / CFK
    • cast iron
    • Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
    • graphite

    Good for:
    • rails


    Properties of the carbide-tipped HARD-LINE core drills:
    Pre-Intermediate-trimmer geometry
    • manufactured in elaborate pre-middle trimmer geometry
    • Thus: vibration-free, quiet and easy cutting with maximum service life

    Conical spiral
    • Made with conical spiral
    • Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

    Sandvik carbide teeth
    • Only equipped with Sandvik carbide teeth
    • NOTE: Only the best carbide is good enough for Karnasch core drills

    Suitable for core drills:
    Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
    Manufacturer
    Karnasch
    Straße des Friedens 10, 15848 Görsdorf, Germany
    www.karnasch.de

    220.55€ 275.68€
    On request in weeks
    Core drill  BLUE-LINE PRO 55 Weldon, Ø 15 mm
    51-38720.131715
    Core drill optimally suited for:
    • Steel < 500 N
    • Steel < 750 N
    • Steel < 900 N
    • Steel < 1100 N
    • Stainless steel < 900 N
    • Stainless steel>900 N
    • Alu < 10% Si
    • Alu>10% Si
    • Copper, brass, nickel, tin
    • Plastics GFK / CFK
    • cast iron
    • Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
    • rails

    Good for:
    • Steel < 1400 N

    Use possible with:
    • graphite


    Characteristics of BLUE-LINE core drills:
    ASP powder steel
    • Made of ASP powder steel for drilling even the most difficult
      Materials such as railroad tracks, stainless steels, exotic alloys
    • Always available where maximum service life is required

    Step hardened HSS core drill
    • Standard hardened HSS core drills in stages
    • As a result extremely hard tooth tips (68 HRC) and still flexible core drill

    Completely sanded from the full material
    • This fine grinding increases the cutting performance while reducing friction
    • For more service life

    unique and patented Durablue coating
    • Extreme surface hardness and smoothness
    • Extreme service life even under less than ideal working conditions such as overhead work, dry drilling, etc

    Five cutting geometries
    • Specially adapted cutting geometries especially for the different diameters and cutting depths

    Suitable for core drills:
    Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
    Manufacturer
    Karnasch
    Straße des Friedens 10, 15848 Görsdorf, Germany
    www.karnasch.de

    94.10€ 117.63€
    On request in weeks
    Category
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
    In stock
    Manufacturers
    Quality class
    Compatibility with the material
    Brand
    Set
    Drive size
    Material drilled
    Accessory attachment
    Drill type
    Tool mounting
    Drive
    Tape dimensions mm
    Color
    Update cookies preferences