Power tools, machinery

• Change planing knives in seconds
• No more adjusting and screwing
• Self-locking
• Particularly low noise

• Stable steel gray cast iron construction
• With rigid milling spindle
• 3 spindle speeds 3500 to 10,000 min¯¹
• Milling spindle with right-left rotation
• Large dimensioned milling unit made of gray cast iron, directly attached to the table
• With extraction hood under the work table for a better suction
• Solid and precise gray cast iron table
• Fast and easy change of speed
• Powerful engine with 5.0 kW
• Standard curved cutting guard
• Quality Made in Italy

• Attached directly to the milling table
• Milling spindle mounted high up with precision ball bearing, thus the lowest possible bearing load and the highest possible service life
• 3 milling speeds from 3500 to 10000 min¯¹

• equipped with powerful three-phase motor

• The standard milling guard is equipped as standard with a height-adjustable guide rail and guard plate for maximum safety.

• Exact milling stop with a quick adjustment and a fine adjustment with scale on the stop jaw
• The integrated suction connection ensures a clear view

• A large cut-out table opening also allows the use of larger flatteners and tenoning and slotting tools above and below the table

• Supplied as standard

• Versatile integrable stop for bridging the tool gap
• enables safe work even with narrow workpieces

• Optimum protection on each router, individually adjustable to the task at hand
• Universal basic elements for holding AIGNER safety and working devices
• Quick adjustable by simultaneous clamping of all individually movable rods
• Made of high quality aluminum
• Universal application on all HOLZKRAFT table milling machines
• 500 mm: Art. No .: 5851000
• 650 mm: Art. No .: 5851650

• Anodized aluminum sliding carriage
• Large dimensioning milling unit made of cast iron, swiveling to -45° to the rear
• Four cutting speeds from 3500 to 10000 min¯¹
• Right-left rotation as standard
• Display height and inclination 1/10 mm exactly
• Powerful 5.0 kW industrial engine

• Stable steel gray cast iron construction
• Anodized aluminum sliding carriage
• Large dimensioning milling unit made of cast iron, swiveling to -45 ° to the rear
• Four cutting speeds from 3500 to 10000 min¯¹
• Right-left rotation as standard
• Display height and inclination 1/10 mm exactly
• Quick and easy change of speed via eccentric tension
• Solid and precise gray cast iron table, stress-free and post-annealed for lasting precision
• Powerful 5.0 kW industrial engine
• Curved cutting guard in scope of supply

• TERSA quick-change system for changing planing knives in seconds
• Four-blade shaft for best planing results
• Smooth running thanks to precision unit and heavy cast iron design
• Long dressing tables for precise dressing
• Robust dressing tables made of ribbed gray cast iron, milled and stress-free, making them insensitive and permanently flat
• Large, sturdy aluminum dressing fence with round rod guide (1200 x 150 mm), easily adjustable and tiltable up to 45°
• With auxiliary fence as standard
• Powerful 5.0 kW industrial motor
• Sturdy cast steel construction
• Equipped with fold-down planer shaft guard for user-friendly working
• Slot drilling device can be retrofitted

• For sawing, milling, planing, thicknessing and optional long hole drilling
• Stable steel gray cast iron construction
• Format sliding table 1600 mm made of anodized aluminum for highest cutting precision
• Precise and convenient cuts even on large workpieces thanks to stable support on the 270 mm wide sliding carriage
• Robust, ribbed cast work tables
• Swiveling saw blade from 90° - 45°
• Trimming frame with telescopic aluminum crosscut fence with a flap stop for plates and large workpieces
• Planing aggregate as standard with TERSA quick change system with three planing knives
• Helical steel pick roller for constant workpiece feed during thickness planing
• Three cutting speeds, manually adjustable from 3,600 - 10,000 rpm
• Three independent industrial motors
• With lockable main switch, motor protection switch, emergency stop switch

aluminum sliding table

• Equipped with a ball contact system proven millions of times
• Permanently smooth-running
• Dust and dirt-resistant due to minimal contact point between the ball and the trapezoidal rail.
• 10-year HOLZKRAFT warranty for wear of the guideways

• Uniform feed rate without loss of force
• Right and left rotation
• Including stand PLUS with high-quality clamping levers and counter, individually swiveling and adjustable for horizontal and vertical use
• Eight speeds possible, speed selection via switch and change gears

• Uniform feed rate without loss of force
• Right and left rotation
• Including stand PLUS with high-quality clamping levers and counter, individually swiveling and adjustable for horizontal and vertical use
• Eight speeds possible, speed selection via switch and change gears

• Uniform feed rate without loss of force
• Right and left rotation
• Including stand PLUS with high-quality clamping levers and counter, individually swiveling and adjustable for horizontal and vertical use
• Eight speeds possible, speed selection via switch and change gears

• Uniform feed rate without loss of force
• Right and left rotation
• Including stand PLUS with high-quality clamping levers and counter, individually swiveling and adjustable for horizontal and vertical use
• Eight speeds possible, speed selection via switch and change gears

• Equipped with soft start
• With stepless speed
• Base plate and turntable made of die-cast aluminum: at the same time compact, robust and easy to transport
• Grid positions in the turntable
• With 31.6 ° grid position especially for cutting ceiling trim
• Standard with double pitch and miter
• Two-sided extension of the workpiece support with hinged stops for repetitive work
• Standard with chip collecting bag
• Easy and fast saw blade change
• Angle adjustment finely adjustable
• Adjustable and high workpiece stops made of aluminum
• Screw clamp for secure workpiece locking
• Also suitable for cutting cornice profiles

• Heavy version with high weight for maximum smoothness
• Precisely adjustable aluminum rip fence
• Large gray cast iron saw table, swiveling from 0° to +45° with ground and polished Surface
• Precise cutting height adjustment via rack with millimeter scale

• Heavy design with high weight for maximum smoothness
• Particularly quiet and precise running thanks to the torsion-resistant machine housing
• Precisely adjustable aluminum rip fence
• cast Flywheels with rubber coating and chip scraper brush
• Large cast iron saw table, swiveling from 0° to +45° with polished and polished surface
• Precise cutting height adjustment using a rack with a millimeter scale
• Two extraction nozzles
• Aluminum fence for cutting thin workpieces; easily repositionable by 90°
• Machine supplied without 400V plug

• Change planing knives in seconds
• No more adjusting and screwing
• Self-locking
• Particularly low noise

• Heavy design with high dead weight for maximum running smoothness
• Cast iron flywheelswith rubber coating and cleaning brush
• 3 roller precision saw band guide as standard.ig above and below
• Large cast iron saw table, swivels from 0° to +15° with ground and polished surface
• Precise cutting height adjustment via toothed rack with millimetre scale

• Heavy design with high dead weight for maximum running smoothness
• Particularly quiet and pretorsionally stiff machine housing
• Cast flywheels with rubber coating and cleaning brush
• 3-roller precision saw band guide as standard at top and bottom
• Large cast iron saw table, swivels from 0° to +15° with ground and polished surface
• Large cast-iron parallel fence with round rod guide, easilyguide, easily movable
• Saw blade tension indicator
• Precise cutting height adjustment overover toothed rack with millimetre scale
• Self-braking motor

• Version with cutting height up to 1650 mm
• Other special versions

• Particularly quiet and precise run thanks to a torsion-free machine housing and a solid steel sheet substructure
• Large one-piece cast iron saw table, with a precisely ground and polished surface
• Comfortable laser device for cutting line marking
• Rapid saw blade tension via eccentric lever on the back of the machine
• Standard with two speeds
• Precise 3-roller saw band guides, standard above and below
• Fast cutting height adjustment via knob and rack with millimeter scale
• Smooth-running aluminum rip fence with eccentric quick clamping and magnifying glass
• Standard miter fence, adjustable by 60 ° on both sides
• Safety switch for automatic shutdown when the door is opened

• Change planing knives in seconds
• No more adjusting and screwing
• Self-locking
• Particularly low noise

• Solid cast wheels driven by a 2.2 kW electric motor
• Manual adjustment of the cutting height via hand crank
• Robust and torsion-resistant steel construction
• Simple operation with the aid of a manual saw feed
• Safety switch integrated in the handle for safe operation
• Stable clamping of the log thanks to adjustable tips
• Precise cuts thanks to adjustable saw blade guide
• Low friction between saw blade and wood thanks to integrated blade lubrication
• The side-mounted chip removal ensures a clean working area
• Any cutting length thanks to bed extensions available as accessories
• Suitable for softwood and hardwood

• For sawing, milling, surface/thickness planing and optional slotted hole drilling in confined spaces
• High precisionziser format sliding carriage made of anodised aluminium, various lengths
• Large extension arm (1200 x 650 mm) with material roll and extendable aluminium telescopic stop up to max. 3200 mm with professional stop flaps
• Max. Saw blade Ø 315 mm, tiltable from 90° to -45°
• Large tilting range of the milling spindle from 90° to -45° backwards
• Four milling speeds up to 10000 min⁻¹ manually adjustable
• With right-left rotation of the milling spindle
• Heavily ribbed dressing work tables made of stress-free grey cast iron for decades of stabilityt and flatness
• 2-stage feed for thickness planing
• Three independent industrial motors for continuous operation
• With lockablebare main switch, motor protection switch
• Fixed handwheels

• Sturdy cast steel construction
• High-precision sliding table made of anodized aluminum with 2250 mm travel
• Maximum saw blade diameter of 315 mm possible, saw blade can be swiveled up to 45 °< / li>
• Large trimming frame (960 x 600 mm) with an extendable aluminum telescopic stop up to 2660 mm
• Heavily ribbed dressing work tables made of gray cast iron, afterglow and tension-free for decades of stability and flatness
< li>Helical toothed steel feed roller for even material feed
• Three milling speeds, manually adjustable
• Milling spindle with right-left rotation
• Three independent industrial motors
• With lockable Main switch, motor protection switch, emergency stop switch

• Sturdy cast steel construction
• High-precision sliding table made of anodized aluminum with 2250 mm travel
• Maximum saw blade diameter of 315 mm possible, saw blade can be swiveled up to 45 °< / li>
• Large trimming frame (960 x 600 mm) with an extendable aluminum telescopic stop up to 2660 mm
• Heavily ribbed dressing work tables made of gray cast iron, afterglow and tension-free for decades of stability and flatness
< li>Helical toothed steel feed roller for even material feed
• Three milling speeds, manually adjustable
• Milling spindle with right-left rotation
• Three independent industrial motors
• With lockable Main switch, motor protection switch, emergency stop switch

• Heavy design with high dead weight for maximum running smoothness
• Cast iron flywheelswith rubber coating and cleaning brush
• 3 roller precision saw band guide as standard.ig above and below
• Large cast iron saw table, swivels from 0° to +15° with ground and polished surface
• Precise cutting height adjustment via toothed rack with millimetre scale

• Heavy design with high dead weight for maximum running smoothness
• Particularly quiet and pretorsionally stiff machine housing
• Cast flywheels with rubber coating and cleaning brush
• 3-roller precision saw band guide as standard at top and bottom
• Large cast iron saw table, swivels from 0° to +15° with ground and polished surface
• Large cast-iron parallel fence with round rod guide, easilyguide, easily movable
• Saw blade tension indicator
• Precise cutting height adjustment overover toothed rack with millimetre scale
• Self-braking motor

• Version with cutting height up to 1650 mm
• Other special versions

• Solid cast wheels driven by an 11 kW petrol engine
• Manual adjustment of the cutting height via hand crank
• Robust and torsion-resistant steel construction
• Simple operation with the aid of a manual saw feed
• Stable clamping of the log thanks to adjustable tips
• Precise cuts thanks to adjustable saw blade guide
• Low friction between saw blade and wood thanks to integrated blade lubrication
• The side-mounted chip removal ensures a clean working area
• Any cutting length thanks to bed extensions available as accessories
• Suitable for softwood and hardwood