Power tools, machinery

• For use in workshops with a simultaneity factor of 1-2 machines, from RLA 2501 2-3 machines (depending on the required volume flow) or as a decentralized extraction system to supplement an already existing stationary system.
• For universal use with various materials - also suitable for dry aluminum chips!
• 100% air recirculation without additional costs and constructional effort
• Delivery ready for connection
• High suction capacity
• Low costs for pipe components and installation, especially when replacing old and no longer approved systems
• Integrated pre-separation chamber to reduce the load and protect the filters
• Compact dimensions, allowing the units to be installed in previously unused areas
• Suction side can be ordered with orientation to the left or right, thus also possible use of workshop niches
• Control system expandable by plug-in technology
• From model RLA 2501 P
• :Optimal filter cleaning after added time after switch-offwith

• sanding unit can be swiveled up to 45 ° via lever
• The machine stand made of welded steel guarantees high torsional rigidity and vibration-free working.
• Oscillating sanding belt with separate gear motor for better sanding results
• Oscillation optionally switchable
• sanding sole with graphite coating for a longer service life of the sanding belt
• Height-adjustable sanding table for utilization of the entire sanding belt width
• Height-adjustable additional table with suction for sanding radii
• The spring-loaded belt tension independently compensates for belt length differences.
• With double suction
• Extendable roller table extension
• With rubberized sanding roller
• Veneer edge sanding device with contact shoe with fine adjustment, unloading rollers and stop rulers
• With grooved feed ruler for veneer projections
• Quick change from veneer edging to solid wood sanding possible

• Unit swivel via handwheel from 90 - 45 °
• KSO 150 F equipped as standard with a sturdy console as preparation for mounting a feed unit
• Feed unit not included

• Ideal for the production of frames, windows and doors thanks to horizontal and vertical pressing units
• Frame pressing device with two horizontal manual hydraulic pressing units
• Horizontal and vertical adjustment of the manual hydraulic pressing units possible
• Three manual hydraulic pressing units with ergonomic handle and comfort adjustment
• 5-position adjustable lower support with fail-safe device in the hole pattern

• Ideal for the production of frames, windows and doors thanks to horizontal and vertical pressing units
• Torsion-resistant base frame made of sturdy welded frame construction with thick-walled profile tubes and laser-machined steel parts
• Three vertical pressure beams with roller bearings made of solid profile tubes, galvanized
• Frame pressing device with two horizontal manual hydraulic pressing units
• Horizontal and vertical adjustment of the manual hydraulic pressing units possible
• Three manual hydraulic pressing units with ergonomic handle and comfort adjustment
• Lower support with fail-safe device, 5-position adjustable in the hole pattern
• Powder-coated and glue-repellent frame components

• Clean exhaust air due to separation of dust in the cyclone separator and cartridge filter
• Manual filter cleaning via rotary crank for consistently high suction power
• Easy emptying of the mobile container

• Effective cyclone technology with 2-stage filtration
• Separation of larger impurities in the waste container and fine dust in the cartridge filter
• Sight glass for checking the fill level in the container
• Manual filter cleaning via rotary crank for consistently high extraction performance
• Flexible maneuvering thanks to swivel castors on the extraction unit and filling container
• Easy emptying of the mobile filling container thanks to quick-release fastener

• Dust tested to H3, residual dust content less than 0.1 mg / m³
• Suitable for vacuuming and separating dry wood and plastic chips
• High extraction capacity with a small footprint
• Maximum performance in this class
• Very quiet
• All models with a collision protection

• Designed for commercial use
• For all woodworking machines with corresponding extraction nozzle diameter

• Robust and compact housing made of galvanized sheet steel
• Extraction nozzle easily convertible from left to right, thus flexible use
• Large inspection openings
• Large-sized, mobile chip container with clamp and chip collecting bag
• Dust remover at delivery already completely assembled, thus quick to use
• All models mobile
• For model RLA 210: Optimum chip distribution in the chip containers due to large filter surface

• Ultra compact with maximum filter surface
• Filter material made of polyester fleece, aluminised, therefore with long service life
• Standard anti-static filter tested and approved according to M-BIA category
• The fan is connected downstream of the filter
• Maximum safety, thanks to antistatic filter elements

• For milling, planing and sawdust (no dust)
• Significantly reduced dust content by BIA-tested filter material with a high degree of separation
• Housing parts and impellers made of high-strength special plastic
• Quick-release fasteners for filters and chip bags for trouble-free maintenance
• Robust, high-quality execution
• Easy to move through castors
• Low energy consumption
• Extractors comply with dust class L

• Fine dust filter cartridge with specially treated polyester fleece
• Retains finest particles
• High airflow, large filter surface
• Higher tear resistance and therefore longer service life

• Removes 91% of all fine dust particles > 1 μm
• Adjustable in three stages
• Time recording forr automatic switch-off
• For cleaning the air in workshops, also suitable for exhibition and living rooms

• Highly efficient filter process removes particles > 5 μm and fine dust particles > 1 μm
• Designed to clean the air in workshops and exhibition rooms
• Ideal supplement to a stationary extraction system without fine filter
• In larger production areas also the use of several unitsrecommended directly at the machine or distributed in the room
• Adjustable in three steps
• Time recording for automatic switch-off
• Convenient operation via remote control
• Pre-filter easy to remove and clean

Examples, how often the air in certain rooms should be changed per hour:

• Assembly halls: 4 - 8 times
• Workshops: 8 - 10 times
• Laboratories: 8 - 15 times

• Grinding unit can be swivelled by hand wheel
• Machine stand made of welded steel guarantees high torsional rigidity and vibration-free operation
• Oscillating sanding belt with separate gear motor for better sanding results
• Oscillation optionally switchable
• Grinding sole with graphite coating for a longer service life of the grinding belt
• Height-adjustable sanding table for utilization of the entire sanding belt width
• Additional table with suction openings for grinding radii on the rubberized deflection roller
• Sanding sleeve device with attachable work table
• The spring-loaded belt tension automatically compensates for belt length differences

• Robust design also allows the machining of longer workpieces
• Swiveling sanding unit, thus also usable as edge sanding machine
• 225 mm balanced belt rollers ensure low-vibration drive.
• Easy adjustment of the sanding belt
• High belt speed of 17 m / s
• Forward and reverse running
• Upper sanding sole with graphite coating
• Sanding pad 4-fold sprung
• With movable sanding shoe for sloping surfaces
• Smooth-running sanding table even under heavy load due to heavy workpieces
• Optimal price-performance ratio

• Standard with electric table height adjustment
• Divided table for unfolding for special edge sanding
• Drawer sander
• Integrated work table lighting

• 225 mm balanced belt rollers ensure optimum and low-vibration drive
• Belt speed 17 m / s

• With swiveling professional sanding pad for sloping surfaces
• 4-fold sprung

• Standard with electric table height adjustment
• Controls ergonomically placed on a separate control panel

• Standard with drawer sanding device
• Split table for folding up for special edge sanding applications

• For milling, planing and sawdust
• High-quality, stable chassis for easy manoeuvring
• Fine filter bag double woven

• For milling, planing and sawdust (not suitable for dust)
• 180° rotatable suction unit enables suction routing from below or above
• Stable fan wheel made of metal
• Standard with high-quality chassis for better stability and easy manoeuvring
• Quick-release fasteners for filter and chip sack
• Fine filter bag double woven

• High-performance bag filter with special surface coating
• Filter of category M
• Dust tested to H3, residual dust content < 0.1 mg / m³
• Large dimensioned filling container for easy and quick replacement of chip bags extendable
• Level controlled by a sight glass
• Approved as industrial vacuum cleaner in conjunction with a floor cleaning set
• Reduced power consumption at full suction power and economical consumption thanks to optimized air flow and high-performance fan with backward-curved impeller arranged on the clean air side
• With aerodynamically sophisticated housing
• Optimum pre-separation by a cyclone already in the intake area
• Filters with large folds, therefore easy to clean, so that highest filter life is achieved and only very low maintenance and operating costs
• Filter cleaning via a hand lever
• M version with automatic filter cleaning
• Due to its low weight, swivel castors and large handles, it can be used quickly and efficiently at various workstations

• Universally applicable also for plastic, metal, glass, styrofoam, paper and the like
• Particularly robust construction
• Housing made of galvanized sheet steel
• Chip drums are powder coated
• Paddle wheel fan for increased suction power
• Significantly reduced dust content due to double-woven fine filter bag
• Extractors comply with dust class L
• Basic units are pre-assembled in modular design
• For large systems only short installation times
• Top value for money
• Short assembly times thanks to modular design

• Dust tested to H3, residual dust content less than 0.1 mg / m³
• Suitable for vacuuming and separating dry wood and plastic chips
• High extraction capacity with a small footprint
• Maximum performance in this class
• Very quiet
• All models with a collision protection

• Designed for commercial use
• For all woodworking machines with corresponding extraction nozzle diameter

• Robust and compact housing made of galvanized sheet steel
• Extraction nozzle easily convertible from left to right, thus flexible use
• Large inspection openings
• Large-sized, mobile chip container with clamp and chip collecting bag
• Dust remover at delivery already completely assembled, thus quick to use
• All models mobile
• For model RLA 210: Optimum chip distribution in the chip containers due to large filter surface

• Ultra compact with maximum filter surface
• Filter material made of polyester fleece, aluminised, therefore with long service life
• Standard anti-static filter tested and approved according to M-BIA category
• The fan is connected downstream of the filter
• Maximum safety, thanks to antistatic filter elements

• Robust design also allows the machining of longer workpieces
• Swiveling sanding unit, thus also usable as edge sanding machine
• 225 mm balanced belt rollers ensure low-vibration drive.
• Easy adjustment of the sanding belt
• High belt speed of 17 m / s
• Forward and reverse running
• Upper sanding sole with graphite coating
• Sanding pad 4-fold sprung
• With movable sanding shoe for sloping surfaces
• Smooth-running sanding table even under heavy load due to heavy workpieces
• Optimal price-performance ratio

• Standard with electric table height adjustment
• Divided table for unfolding for special edge sanding
• Drawer sander
• Integrated work table lighting

• 225 mm balanced belt rollers ensure optimum and low-vibration drive
• Belt speed 17 m / s

• With swiveling professional sanding pad for sloping surfaces
• 4-fold sprung

• Standard with electric table height adjustment
• Controls ergonomically placed on a separate control panel

• Standard with drawer sanding device
• Split table for folding up for special edge sanding applications

• Steplessly adjustable feed via potentiometer
• Simple height adjustment via crank
• Simple replacement of the sanding paper
• Closed base

• Feed rate infinitely adjustable via potentiometer
• Stable construction for high sanding accuracy
• Table extension at the infeed and outfeed
• Simple height adjustment of the sanding unit via crank handle
• Lateral sanding head holder removable for processing wider workpieces
• Easy replacement of the sanding paper
• Closed base with cabinet system and storage compartment

• Universally applicable also for plastic, metal, glass, styrofoam, paper and the like
• Particularly robust construction
• Housing made of galvanized sheet steel
• Chip drums are powder coated
• Paddle wheel fan for increased suction power
• Significantly reduced dust content due to double-woven fine filter bag
• Extractors comply with dust class L
• Basic units are pre-assembled in modular design
• For large systems only short installation times
• Top value for money
• Short assembly times thanks to modular design

• Dust tested to H3, residual dust content less than 0.1 mg / m³
• Suitable for vacuuming and separating dry wood and plastic chips
• High extraction capacity with a small footprint
• Maximum performance in this class
• Very quiet
• All models with a collision protection

• Designed for commercial use
• For all woodworking machines with corresponding extraction nozzle diameter

• Robust and compact housing made of galvanized sheet steel
• Extraction nozzle easily convertible from left to right, thus flexible use
• Large inspection openings
• Large-sized, mobile chip container with clamp and chip collecting bag
• Dust remover at delivery already completely assembled, thus quick to use
• All models mobile
• For model RLA 210: Optimum chip distribution in the chip containers due to large filter surface

• Ultra compact with maximum filter surface
• Filter material made of polyester fleece, aluminised, therefore with long service life
• Standard anti-static filter tested and approved according to M-BIA category
• The fan is connected downstream of the filter
• Maximum safety, thanks to antistatic filter elements

• Dust tested to H3, residual dust content less than 0.1 mg / m³
• Suitable for vacuuming and separating dry wood and plastic chips
• High extraction capacity with a small footprint
• Maximum performance in this class
• Very quiet
• All models with a collision protection

• Designed for commercial use
• For all woodworking machines with corresponding extraction nozzle diameter

• Robust and compact housing made of galvanized sheet steel
• Extraction nozzle easily convertible from left to right, thus flexible use
• Large inspection openings
• Large-sized, mobile chip container with clamp and chip collecting bag
• Dust remover at delivery already completely assembled, thus quick to use
• All models mobile
• For model RLA 210: Optimum chip distribution in the chip containers due to large filter surface

• Ultra compact with maximum filter surface
• Filter material made of polyester fleece, aluminised, therefore with long service life
• Standard anti-static filter tested and approved according to M-BIA category
• The fan is connected downstream of the filter
• Maximum safety, thanks to antistatic filter elements