Elektri- ja akutööriistad, tööpingid

Tarvikud elektritööriistadele ja tööpinkidele

Generaatorid

Vaata kui Tabel Nimekiri

Sorteerimine

Kuva leheküljel

Lihvpaber, ristkülik 80 × 130 mm, P240, 5 tk, 8 avaga, lihvijale 04-623, takjakinnitusega

03-54052

Takjakinnitusega lihvpaberite komplekt on mõeldud peeneks viimistluslihvimiseks puidul, metallil, plastikul ja kipsplaatidel. Ristkülikukujulised lihvpaberid mõõtmetega 80 × 130 mm sobivad kasutamiseks NEO TOOLS võnklihvijaga 04-623. Takjakinnitus võimaldab kiiret ja mugavat lihvpaberi vahetamist ning tagab kindla kinnituse töö ajal.

Lihvpaberitel on 8 tolmueemaldusava, mis aitavad tõhusalt eemaldada lihvimistolmu, parandades töö kvaliteeti ja pikendades abrasiivi kasutusiga. P240 karedusega lihvpaber sobib eriti hästi pindade lõppviimistluseks enne värvimist, lakkimist või muud pinnatöötlust.

Tehnilised andmed:

Mõõtmed: 80 × 130 mm
Kareduse aste: P240
Avade arv: 8
Kinnitus: takjakinnitus (Velcro)
Kogus pakendis: 5 tk
Sobib seadmele: NEO TOOLS 04-623

3,00€

Tellimisel

Sanding paper, velcro 113 x 113 mm, P120, 5 pcs. with 8 holes

03-54054

Velcro-mounted sanding papers, square 113 x 113 mm, P120, 5 pieces, with 8 holes for 04-623, 54-054 by NEO TOOLS is a set of 5 pieces of papers recommended for the 04-623 NEO TOOLS orbital sander. The sanding papers are mounted with practical Velcro and contain 8 holes. They will work well with wood, metal, plastic and plasterboard. They are characterised by a gradation of P120 and dimensions of 113 x 113 mm. NEO TOOLS sanding papers are recommended for DIY enthusiasts for many projects.

3,00€

Tellimisel

SDS Plus piik 17 × 280 mm

02-55T109

The SDS Plus 17 x 280 mm 55T109 pick by GRAPHITE is a pick equipped with an SDS Plus handle with a diameter of 17 mm and an overall length of 280 mm. The tool will perform well when working with concrete. This is a solidly made GRAPHITE pick that will be invaluable in any DIYer's equipment.

4,01€

Tellimisel

SDS Plus kanalimeisel 14 × 250 mm

02-55T110

GRAPHITE's SDS Plus 14 x 250 mm 55T110 chasing block is a tool for working with concrete, fitted with an SDS Plus chuck. It features a diameter of 14 mm and an overall length of 250 mm. The GRAPHITE branded chasing block will be invaluable in every DIYer's toolbox.

3,79€

Tellimisel

Sanding paper, iron 146 x 156 x 100 mm, P240, 5 pcs, with 9 holes for 04-623

03-54058

Velcro mounted sanding papers, iron 100 x 147 mm, P240, 5 pieces, with 8 holes for 04-623, 54-058 by NEO TOOLS is a set of 5 pieces of papers recommended for the 04-623 NEO TOOLS orbital sander. The sanding papers are mounted with practical Velcro and contain 8 holes. They will work well with wood, metal, plastic and plasterboard. They are characterised by a gradation of P240 and dimensions of 100 x 147 mm. NEO TOOLS sanding papers are recommended for DIY enthusiasts for many projects.

3,00€

Tellimisel

SDS Plus meislite komplekt, 4 tk

02-55T115

SDS Plus chisels, set of 4 pieces 55T115 by GRAPHITE are tools for working in concrete, equipped with an SDS Plus handle. They feature a variety of diameters and an overall length of 250mm. They will be invaluable in any DIYer's toolbox.

12,60€

Tellimisel

SDS Max lapikmeisel 40 × 18 × 400 mm

02-55T106

The SDS Max 40 x 18 x 400 mm flat shovel chisel 55T106 by GRAPHITE is a tool designed for working with concrete and has an SDS Max handle. It features a diameter of 18 mm, an overall length of 400 mm, a working part width of 40 mm and a working part length of 40 mm. It will be indispensable in every DIYer's equipment.

8,39€

Tellimisel

SDS Plus lame meisel 40 × 17 × 280 mm

02-55T114

The SDS Plus 40 x 17 x 280 mm 55T114 flat chisel by GRAPHITE is a tool for working in concrete, fitted with an SDS Plus chuck. It features a diameter of 17 mm, an overall length of 280 mm, a working part width of 40 mm and a working part length of 40 mm. It will be invaluable in any DIYer's toolbox.

5,20€

Tellimisel

SDS Max lame meisel 25 × 18 × 600 mm

02-55T104

The SDS Max 25 x 18 x 600 mm 55T104 flat chisel by GRAPHITE is a tool for working in concrete, fitted with an SDS Max chuck. It features a diameter of 18 mm, an overall length of 600 mm, a working part width of 25 mm and a working part length of 25 mm. It will be invaluable in any DIYer's toolbox.

10,40€

Tellimisel

SDS Max lame meisel 25 × 18 × 280 mm

02-55T102

The SDS Max 25 x 18 x 280 mm 55T102 flat chisel by GRAPHITE is a tool for working in concrete, fitted with an SDS Max chuck. It features a diameter of 18 mm, an overall length of 280 mm, a working part width of 25 mm and a working part length of 25 mm. It will be invaluable in any DIYer's toolbox.

5,10€

Tellimisel

Lihvpaber, ristkülik 80 × 130 mm, P120, 5 tk, 8 avaga, lihvijale 04-623, takjakinnitusega

03-54051

Takjakinnitusega lihvpaberite komplekt on mõeldud täpseks puidu, metalli, plastiku ja kipsplaadi lihvimiseks. Ristkülikukujulised lihvpaberid mõõtmetega 80 × 130 mm on spetsiaalselt ette nähtud kasutamiseks NEO TOOLS lihvijaga 04-623. Takjakinnitus võimaldab kiiret ja mugavat paigaldamist ning vahetamist.

Lihvpaberitel on 8 tolmueemaldusava, mis parandavad tolmu eemaldamist töö käigus, suurendavad kasutusmugavust ja aitavad pikendada abrasiivi kasutusiga. P120 karedusega lihvpaber sobib pindade ettevalmistamiseks enne viimistlemist ning väiksemate ebatasasuste eemaldamiseks.

Tehnilised andmed:

Mõõtmed: 80 × 130 mm
Kareduse aste: P120
Avade arv: 8
Kinnitus: takjakinnitus (Velcro)
Kogus pakendis: 5 tk
Sobib seadmele: NEO TOOLS 04-623

3,00€

Tellimisel

SDS Plus piik 14 × 250 mm

02-55T108

The SDS Plus 14 x 250 mm 55T108 by GRAPHITE is a pick equipped with an SDS Plus handle with a diameter of 14 mm and an overall length of 250 mm. The tool will perform well when working with concrete. This is a solidly made GRAPHITE pick that will be invaluable in any DIYer's equipment.

3,00€

Tellimisel

SDS Max lame meisel 25 × 18 × 400 mm

02-55T103

The SDS Max 25 x 18 x 400 mm flat chisel 55T103 by GRAPHITE is a tool for working in concrete, fitted with an SDS Max chuck. It features a diameter of 18 mm, an overall length of 400 mm, a working part width of 25 mm and a working part length of 25 mm. It will be invaluable in any DIYer's toolbox.

7,20€

Tellimisel

Polüstüreeni lõikur 68 mm

02-56T615

The 68mm polystyrene cutter 56T615 by GRAPHITE is a 68mm diameter cutter that has an 8mm hex shank and allows drilling to a depth of 20mm. It is designed to work in polystyrene - especially for masking areas after the installation of thermal insulation studs.

2,41€

Tellimisel

Wire wheel brush 150 x 32 mm, crimped wire, brass-plated

02-57T406

The 150 x 32 mm wire wheel brush, twisted wire, brassed 57T406 by GRAPHITE is made of twisted brassed wire. Its maximum speed is 6000 rpm. The product complies with EN 1083-2 and includes reductions: 2 x 12.2 mm (1/2"), 2 x 15.7 mm (5/8"), 2 x 19 mm (3/4"), 2 x 22.2 mm (7/8") and 2 x 25.3 mm (1"). The mount is suitable for use with bench grinders. The GRAPHITE wire brush is a versatile product for a wide range of tasks, including aggressive cleaning and initial roughing.

9,70€

Tellimisel

Kõvasulamhammastega saeketas 210 × 30 mm, 40 hammast

02-57T228

Saw blade, widia, 210 x 30 mm, 40 teeth 57T228 by GRAPHITE, with an external diameter of 210 mm and a mounting hole diameter of 30 mm. It has 40 teeth, the cut width is 2.4 mm and the tooth angle is 15°. The maximum speed is 8,000 rpm. It is characterised by a fast cutting type. The blade complies with EN 847-1 and includes 30/25.4 mm, 30/20 mm and 30/16 mm reduction rings. The GRAPHITE brand saw blade is designed for cutting wood and wood-based materials such as plywood, chipboard and MDF. The reduction rings included in the package allow the blade to be used with most saw models.

9,00€

Tellimisel

Jigsaw blade, 12 TPI, HSC, T-shaped handle, 2 pcs, curved cut

02-57T543

Jigsaw blade, 12 TPI, HCS, T-handle, 2 pieces, curved cutting 57T543 by GRAPHITE is a jigsaw blade, with a tooth density of 12 TPI, made of HCS and with a T-handle. The set includes 2 pieces. The overall length of the blade is 76 mm, working length 50 mm, width 5.2 mm, thickness 1 mm, tooth spacing 2 mm. Suitable for cutting softwood 2-15 mm thick, chipboard, plywood and fibreboard. The GRAPHITE blade allows for curved and basic cuts.

1,10€

Tellimisel

Kõvasulamhammastega saeketas 230 × 30 mm, 80 hammast

02-57T229

Saw blade, widia, 230 x 30 mm, 80 teeth 57T229 by GRAPHITE, with an external diameter of 230 mm and a mounting hole diameter of 30 mm. It has 80 teeth, the cut width is 2.4 mm and the tooth angle is 15°. The maximum speed is 7,500 rpm. It is characterised by a fast cutting type. The saw blade complies with EN 847-1 and includes 30/25.4 mm, 30/20 mm and 30/16 mm reduction rings. The GRAPHITE brand saw blade is designed for cutting wood and wood-based materials such as plywood, chipboard and MDF. The reduction rings included in the package allow the blade to be used with most saw models.

10,80€

Tellimisel

Blades for reciprocating saw, TPI 5, TPI 6, TPI 18, HCS/BIM, set 10 pcs

02-57T566

Sabre saw blade set, TPI 5, TPI 6, TPI 18, HCS/BIM, 10 piece set 57T566 by GRAPHITE containing 10 pieces and consisting of: 3x 57T563 - GRAPHITE HCS saw blades, 240 mm long, 19 mm wide and 1.5 mm thick, with 5 mm tooth spacing (5 TPI), designed for cutting thick wood without nails (15-190 mm), trimming green wood (diameter <190 mm) and firewood (diameter 15-190 mm); for fast and rough cutting, 4x 57T564 - GRAPHITE HCS saw blades, 152 mm long, 19 mm wide and 1.3 mm thick, with tooth pitch 4 mm (6 TPI), designed for cutting structural timber, plywood, plastics (6-100 mm), wood panels (<75 mm), chipboard and MDF (6-60 mm); for clean curved and plunge cuts, 3x 57T561 - GRAPHITE BIM saw blades, 152 mm long, 19 mm wide and 0.9 mm thick, with 1.4 mm tooth pitch (18 TPI), for thin sheet metal (1.5-4 mm), open and closed tubes and profiles with a diameter of 5-100 mm; offering flexibility and straight cutting.

24,40€

Tellimisel

Spiraalpuidupuur 12 x 230 mm

02-54T553

The spiral wood drill, 12 x 230 mm 54T553 by GRAPHITE is a drill bit designed for working with wood and plywood, featuring a hexagonal chuck, and a spiral design. It features a diameter of 12 mm and a length of 230 mm. Adapted for tasks with a maximum speed of 1500 rpm. Will work well for many DIY tasks.

3,00€

Tellimisel

Elektri- ja akutööriistad, tööpingid

Elektrilised käsitööriistad

Akutööriistad

Puidutööpingid

Metallitööpingid

Keevitusseadmed

Tarvikud elektritööriistadele ja tööpinkidele

Generaatorid