The SDS Plus double helix 14 x 410 mm 56T136 concrete drill bit by GRAPHITE is a concrete, brick and stone drill bit with a double helix and SDS Plus chuck. It features a diameter of 14 mm and an overall length of 410 mm and a working length of 310 mm. It will prove useful for many tasks around the home and in the workshop.
P150 karedusega lihvkettad sobivad peenlihvimiseks ning pindade ettevalmistamiseks enne lõppviimistlust, värvimist või lakkimist. Takjakinnitus võimaldab lihvketta kiiret ja mugavat vahetamist, tagades sujuva ja efektiivse tööprotsessi. Lihvkettad sobivad puidu, metalli ja plastiku töötlemiseks ning tagavad ühtlase lihvimistulemuse. Kuna kettad on ilma tolmuavadeta, sobivad need lihvmasinatele, mis ei vaja tolmueemaldusavadega tarvikuid. Pakendis on 5 lihvketast.
GRAPHITE's 57T322 diamond grinding disc, 1 segment, 125 x 22.2 mm, dry 57T322 is equipped with one segment and designed for dry use. Reduction rings are included. The segment is characterised by a height of 4.5 mm and a width of 9.5 mm. The maximum speed of the GRAPHITE disc is 12,200 rpm, equivalent to 80 m/s. The disc is designed for grinding concrete, cellular concrete, brick and stone. The holes in this accessory improve cooling while working and effectively remove dust and abrasive material. This makes grinding faster and more efficient. The diamond-coated segments ensure effective and efficient sanding. They wear evenly, which also guarantees consistent work quality. The segmented design improves heat dissipation and prevents the disc from overheating. GRAPHITE's product meets the requirements of EN 13236.
GRAPHITE's SDS Plus double helix concrete drill bit 28 x 600 mm 56T167 is a concrete, brick and stone drill bit with a double helix and SDS Plus chuck. It features a diameter of 28mm and an overall length of 600mm and a working length of 470mm. It will prove useful for many tasks around the home and in the workshop.
The 75 mm diameter nylon butt brush, M14, 57T425 by GRAPHITE is made of nylon. Equipped with an M14 thread, it is designed for use with angle grinders. The maximum speed of the tool is 12500 rpm. The product complies with EN 1083-2 and works well for roughing surfaces, cleaning, removing paint or dirt.
The SDS Plus double helix 12 x 600 mm 56T130 concrete drill bit by GRAPHITE is a concrete, brick and stone drill bit with a double helix and SDS Plus chuck. It features a diameter of 12 mm and an overall length of 600 mm and a working length of 470 mm. It will prove useful for many tasks around the home and in the workshop.
Endless belts 75 x 457 mm, P60, 3 pcs. 58T361 by GRAPHITE are designed for machine use and work with belt sanders. They have a backing made of paper and an electrocorundum coating. GRAPHITE brand belts are suitable for metal, wood, plastic and plasterboard. They will prove their worth in many tasks.
Velcro sanding papers, iron 102 x 152 mm, P60, 5 pieces, with 11 holes 58T301 by GRAPHITE is a set of 5 pieces of Velcro sanding papers, 102 x 152 mm. They are characterised by a cut-out in the shape of a so-called iron - with the possibility of detaching one of the parts and fitting it to a sander with a delta foot. The accessories have a paper backing and an electro-corundum coating. They are designed for machine use. With 11 holes on the surface, they allow them to be used on sanders equipped with a dust extraction system. The Velcro attachment allows for quick and easy changing of the GRAPHITE sanding sheets. They are suitable for use on wood, metal, plastic, glass and plasterboard.
Grinding discs 200 x 20/16/12.7 x 20 mm, P 60, 2 pieces 57T128 by GRAPHITE have an external diameter of 200 mm and a thickness of 20 mm. The set includes 2 pieces of accessories with a gradation of P 60. The inner diameter of the mounting hole is 12.7 mm, but reductions are included: from 20 to 16 mm and from 16 to 12.7 mm. GRAPHITE brand discs will work well for use on bench grinders. The maximum recommended speed for them is 3350 rpm. They are used for grinding metal, sharpening knives, chisels and other cutting tools, as well as machining and levelling metal surfaces.
GRAPHITE's 14mm 56T700 bi-metal hole saw 56mm high allows drilling to a depth of 38mm. It is made from HSS high speed steel and is fitted with a 1/2'' x 20 UNF thread. It is designed to work in metal, stainless steel (Inox), cast iron, brass, aluminium and wood. The GRAPHITE hole saw is recommended to be used with the 56T753 adapter with pilot drill bit for bi-metal hole saws in the 14-30 mm range. Maximum speeds for this tool, vary depending on the material: steel - 580 rpm, Inox steel - 300 rpm, aluminium - 900 rpm, wood - 800 rpm, cast iron - 400 rpm, brass - 790 rpm. The bi-metal hole saw is designed for use with a drill or drill/driver.
The SDS Plus, Hex, 32 mm 54T426 wood splitting drill bit by GRAPHITE is a drill bit suitable for splitting wood into smaller pieces by drilling splitting holes. Equipped with two practical adapters, hexagonal (1/4 Hex) and SDS Plus, it allows easy and efficient installation in the drill. The GRAPHITE brand drill bit features a drill diameter of 32 mm and an overall length of 93 mm. It will prove useful as an accessory for the toolbox of any DIYer working with wood.
The Hex 5.0 mm wood drill 54T579 by GRAPHITE is a drill bit designed for working with wood and plywood and features a HEX shank. It is characterised by a diameter of 5 mm and a length of 100 mm. It is suitable for tasks with a maximum speed of 2500 rpm. It will work well for many DIY tasks.
GRAPHITE's 5 mm/16 mm wood chamfer drill 54T425 is a tool characterised by a drill diameter of 5 mm, a chamfer diameter of 16 mm and an overall length of 85 mm. Equipped with a cylindrical chuck, it is recommended for drilling holes for countersunk mounting screws or for additional countersinking of holes. The GRAPHITE wood chamfer drill bit will make a good addition to any DIYer's equipment.
GRAPHITE's 43mm 56T739 tungsten tipped hole saw is designed to work in brick, hollow block, cellular concrete, plasterboard and lightweight building materials. It has a height of 68mm and provides a drilling depth of 57mm. The cutting edge of the hole saw is coated with a tungsten carbide coating and has a maximum speed of 1,200 rpm. The tool is designed for use with the 56T744 tungsten carbide hole saw blade and 56T745 pilot drill. It can be used for any installation work, such as fitting power sockets, distribution boxes or pipes. It can also be used for cable conduit pipes, ventilation pipes or installation fans in the kitchen or bathroom.
The SDS Plus double helix 14 x 210 mm 56T133 concrete drill bit by GRAPHITE is a concrete, brick and stone drill bit with a double helix and SDS Plus chuck. It features a diameter of 14 mm and an overall length of 210 mm and a working length of 133 mm. It will prove useful for many tasks around the home and in the workshop.
Endless belts 75 x 533 mm, P100, 3 pcs. 58T369 by GRAPHITE are designed for machine use and work with belt sanders. They have a backing made of paper and an electrocorundum coating. GRAPHITE brand belts are suitable for metal, wood, plastic and plasterboard. They will prove their worth in many tasks.
Wood hole saws 26 - 63 mm, h 25 mm, hardened teeth, set of 7 pieces 56T751 by GRAPHITE is a set containing 7 pieces with diameters: 26, 32, 38, 45, 50, 56 and 63 mm. The height of each hole saw is 25 mm and the maximum drilling depth is 18 mm. The maximum speed is 1500 rpm. The product is fitted with hardened teeth and is designed for drilling in wood, plasterboard and plastic.
Saw blade, widia, 160 x 30 mm, 24 teeth 57T209 by GRAPHITE, with an external diameter of 160 mm and a mounting hole diameter of 30 mm. It has 24 teeth, the cut width is 2 mm and the tooth angle is 15°. The maximum speed is 11,100 rpm. It is characterised by a fast cutting type. The saw blade complies with EN 847-1 and includes 30/25.4 mm, 30/20 mm and 30/16 mm reduction rings. The GRAPHITE brand saw blade is designed for cutting wood and wood-based materials such as plywood, chipboard and MDF. The reduction rings included in the package allow the blade to be used with most saw models.
Velcro sanding papers, iron 102 x 152 mm, P180, 5 pieces, with 11 holes 58T306 by GRAPHITE is a set of 5 pieces of Velcro sanding papers, 102 x 152 mm. They are characterised by a cut-out in the shape of a so-called iron - with the possibility of detaching one of the parts and fitting it to a sander with a delta foot. The accessories have a paper backing and an electro-corundum coating. They are designed for machine use. With 11 holes on the surface, they allow them to be used on sanders equipped with a dust extraction system. The Velcro attachment allows for quick and easy changing of the GRAPHITE sanding sheets. They are suitable for use on wood, metal, plastic, glass and plasterboard.
The HSS metal drill bit, DIN 338, 6.5 mm 54T965 by GRAPHITE is an accessory for metal, characterised by a diameter of 6.5 mm, an overall length of 101 mm and a working part length of 63 mm. The drill bit is made from HSS high speed steel. It has a cylindrical chuck and a 118° drill sharpening angle. It is in compliance with DIN 338 and will be suitable for every DIY enthusiast.
