Elektri- ja akutööriistad, tööpingid

Tarvikud elektritööriistadele ja tööpinkidele

Generaatorid

Vaata kui Tabel Nimekiri

Sorteerimine

Kuva leheküljel

Core drill HARD-LINE 80 Weldon Ø 20 mm

51-38720.165020

Core drill optimally suited for:

Steel < 500 N
Steel < 750 N
Steel < 900 N
Steel < 1100 N
Steel < 1400 N
Stainless steel < 900 N
Stainless steel>900 N
Alu < 10% Si
Alu>10% Si
Copper, brass, nickel, tin
Plastics GFK / CFK
cast iron
Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
graphite

Good for:

rails

Properties of the carbide-tipped HARD-LINE core drills:
Pre-Intermediate-trimmer geometry

manufactured in elaborate pre-middle trimmer geometry
Thus: vibration-free, quiet and easy cutting with maximum service life

Conical spiral

Made with conical spiral
Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

Sandvik carbide teeth

Only equipped with Sandvik carbide teeth
NOTE: Only the best carbide is good enough for Karnasch core drills

Suitable for core drills:
Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
Manufacturer
Karnasch
Straße des Friedens 10, 15848 Görsdorf, Germany
www.karnasch.de

82,94€ 91,95€

Laost otsas. Tellides tarneaeg nädalat

Core drill BLPRO55WLDM30MM

51-38720.131730

Core drill optimally suited for:

Steel < 500 N
Steel < 750 N
Steel < 900 N
Steel < 1100 N
Stainless steel < 900 N
Stainless steel>900 N
Alu < 10% Si
Alu>10% Si
Copper, brass, nickel, tin
Plastics GFK / CFK
cast iron
Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
rails

Good for:

Steel < 1400 N

Use possible with:

graphite

Characteristics of BLUE-LINE core drills:
ASP powder steel

Made of ASP powder steel for drilling even the most difficult
Materials such as railroad tracks, stainless steels, exotic alloys
Always available where maximum service life is required

Step hardened HSS core drill

Standard hardened HSS core drills in stages
As a result extremely hard tooth tips (68 HRC) and still flexible core drill

Completely sanded from the full material

This fine grinding increases the cutting performance while reducing friction
For more service life

unique and patented Durablue coating

Extreme surface hardness and smoothness
Extreme service life even under less than ideal working conditions such as overhead work, dry drilling, etc

Five cutting geometries

Specially adapted cutting geometries especially for the different diameters and cutting depths

174,39€ 193,32€

Laost otsas. Tellides tarneaeg nädalat

Cup grinding wheel red 40x22x10

51-3107120

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

20,41€ 22,63€

Laost otsas. Tellides tarneaeg nädalat

Core drill HARD-LINE 80 Weldon Ø 68 mm

51-38720.165068

Core drill optimally suited for:

Steel < 500 N
Steel < 750 N
Steel < 900 N
Steel < 1100 N
Steel < 1400 N
Stainless steel < 900 N
Stainless steel>900 N
Alu < 10% Si
Alu>10% Si
Copper, brass, nickel, tin
Plastics GFK / CFK
cast iron
Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
graphite

Good for:

rails

Properties of the carbide-tipped HARD-LINE core drills:
Pre-Intermediate-trimmer geometry

manufactured in elaborate pre-middle trimmer geometry
Thus: vibration-free, quiet and easy cutting with maximum service life

Conical spiral

Made with conical spiral
Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

Sandvik carbide teeth

Only equipped with Sandvik carbide teeth
NOTE: Only the best carbide is good enough for Karnasch core drills

269,74€ 299,01€

Laost otsas. Tellides tarneaeg nädalat

Kaitsekabiin FSM 3060 lihvpingile

51-3939116

Täielik pritsmekaitse FSM 3060 seadmele.

Kaitseb tööala pritsmete eest ning tagab seadme ohutuma ja puhtama kasutamise.

6436,82€ 7135,67€

Laost otsas. Tellides tarneaeg nädalat

Core drill HARD-LINE 55 Universal Ø 48 mm

51-38720.131648

Core drill optimally suited for:

Steel < 500 N
Steel < 750 N
Steel < 900 N
Steel < 1100 N
Steel < 1400 N
Stainless steel < 900 N
Stainless steel>900 N
Alu < 10% Si
Alu>10% Si
Copper, brass, nickel, tin
Plastics GFK / CFK
cast iron
Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
graphite

Good for:

rails

Properties of the carbide-tipped HARD-LINE core drills:
Pre-Intermediate-trimmer geometry

manufactured in elaborate pre-middle trimmer geometry
Thus: vibration-free, quiet and easy cutting with maximum service life

Conical spiral

Made with conical spiral
Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

Sandvik carbide teeth

Only equipped with Sandvik carbide teeth
NOTE: Only the best carbide is good enough for Karnasch core drills

103,86€ 115,15€

Laost otsas. Tellides tarneaeg nädalat

Core drill HARD-LINE 55 Universal Ø 52 mm

51-38720.131652

Core drill optimally suited for:

Steel < 500 N
Steel < 750 N
Steel < 900 N
Steel < 1100 N
Steel < 1400 N
Stainless steel < 900 N
Stainless steel>900 N
Alu < 10% Si
Alu>10% Si
Copper, brass, nickel, tin
Plastics GFK / CFK
cast iron
Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
graphite

Good for:

rails

Properties of the carbide-tipped HARD-LINE core drills:
Pre-Intermediate-trimmer geometry

manufactured in elaborate pre-middle trimmer geometry
Thus: vibration-free, quiet and easy cutting with maximum service life

Conical spiral

Made with conical spiral
Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

Sandvik carbide teeth

Only equipped with Sandvik carbide teeth
NOTE: Only the best carbide is good enough for Karnasch core drills

122,15€ 135,41€

Laost otsas. Tellides tarneaeg nädalat

Core drill HARD-LINE 40 Universal, Ø 17 mm

51-38720.131517

Core drill optimally suited for:

Steel < 500 N
Steel < 750 N
Steel < 900 N
Steel < 1100 N
Steel < 1400 N
Stainless steel < 900 N
Stainless steel>900 N
Alu < 10% Si
Alu>10% Si
Copper, brass, nickel, tin
Plastics GFK / CFK
cast iron
Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
graphite

Good for:

rails

Properties of the carbide-tipped HARD-LINE core drills:
Pre-Intermediate-trimmer geometry

manufactured in elaborate pre-middle trimmer geometry
Thus: vibration-free, quiet and easy cutting with maximum service life

Conical spiral

Made with conical spiral
Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

Sandvik carbide teeth

Only equipped with Sandvik carbide teeth
NOTE: Only the best carbide is good enough for Karnasch core drills

49,49€ 54,87€

Laost otsas. Tellides tarneaeg nädalat

Core drill HARD-LINE 55 Universal Ø 14 mm

51-38720.131614

Core drill optimally suited for:

Steel < 500 N
Steel < 750 N
Steel < 900 N
Steel < 1100 N
Steel < 1400 N
Stainless steel < 900 N
Stainless steel>900 N
Alu < 10% Si
Alu>10% Si
Copper, brass, nickel, tin
Plastics GFK / CFK
cast iron
Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
graphite

Good for:

rails

Properties of the carbide-tipped HARD-LINE core drills:
Pre-Intermediate-trimmer geometry

manufactured in elaborate pre-middle trimmer geometry
Thus: vibration-free, quiet and easy cutting with maximum service life

Conical spiral

Made with conical spiral
Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

Sandvik carbide teeth

Only equipped with Sandvik carbide teeth
NOTE: Only the best carbide is good enough for Karnasch core drills

54,50€ 60,41€

Laost otsas. Tellides tarneaeg nädalat

Core drill HARD-LINE 55 Weldon Ø 73 mm

51-38720.131673

Core drill optimally suited for:

Steel < 500 N
Steel < 750 N
Steel < 900 N
Steel < 1100 N
Steel < 1400 N
Stainless steel < 900 N
Stainless steel>900 N
Alu < 10% Si
Alu>10% Si
Copper, brass, nickel, tin
Plastics GFK / CFK
cast iron
Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
graphite

Good for:

rails

Properties of the carbide-tipped HARD-LINE core drills:
Pre-Intermediate-trimmer geometry

manufactured in elaborate pre-middle trimmer geometry
Thus: vibration-free, quiet and easy cutting with maximum service life

Conical spiral

Made with conical spiral
Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

Sandvik carbide teeth

Only equipped with Sandvik carbide teeth
NOTE: Only the best carbide is good enough for Karnasch core drills

205,58€ 227,90€

Laost otsas. Tellides tarneaeg nädalat

Core drill BLPRO55WLDM32MM

51-38720.131732

Core drill optimally suited for:

Steel < 500 N
Steel < 750 N
Steel < 900 N
Steel < 1100 N
Stainless steel < 900 N
Stainless steel>900 N
Alu < 10% Si
Alu>10% Si
Copper, brass, nickel, tin
Plastics GFK / CFK
cast iron
Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
rails

Good for:

Steel < 1400 N

Use possible with:

graphite

Characteristics of BLUE-LINE core drills:
ASP powder steel

Made of ASP powder steel for drilling even the most difficult
Materials such as railroad tracks, stainless steels, exotic alloys
Always available where maximum service life is required

Step hardened HSS core drill

Standard hardened HSS core drills in stages
As a result extremely hard tooth tips (68 HRC) and still flexible core drill

Completely sanded from the full material

This fine grinding increases the cutting performance while reducing friction
For more service life

unique and patented Durablue coating

Extreme surface hardness and smoothness
Extreme service life even under less than ideal working conditions such as overhead work, dry drilling, etc

Five cutting geometries

Specially adapted cutting geometries especially for the different diameters and cutting depths

186,66€ 206,93€

Laost otsas. Tellides tarneaeg nädalat

Automaatne ristliikumise etteanne FSM 2050-le

51-3939004

Automaatne ristliikumise etteande seade pinnalihvimismasinale FSM 2050. Tagab ühtlase ja täpse automaatse etteande, suurendades töö tootlikkust ja lihvimistulemuste kvaliteeti.

1462,49€ 1621,29€

Laost otsas. Tellides tarneaeg nädalat

Core drilling starter set 1

51-3873008SET

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

236,52€ 262,20€

Laost otsas. Tellides tarneaeg nädalat

Automatic adjustment of the cross feed for FSM 3060

51-3939103

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

1462,49€ 1621,29€

Laost otsas. Tellides tarneaeg nädalat

Core drill HARD-LINE 110 Weldon Ø 33 mm

51-38720.166033

Core drill optimally suited for:

Steel < 500 N
Steel < 750 N
Steel < 900 N
Steel < 1100 N
Steel < 1400 N
Stainless steel < 900 N
Stainless steel>900 N
Alu < 10% Si
Alu>10% Si
Copper, brass, nickel, tin
Plastics GFK / CFK
cast iron
Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
graphite

Good for:

rails

Properties of the carbide-tipped HARD-LINE core drills:
Pre-Intermediate-trimmer geometry

manufactured in elaborate pre-middle trimmer geometry
Thus: vibration-free, quiet and easy cutting with maximum service life

Conical spiral

Made with conical spiral
Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

Sandvik carbide teeth

Only equipped with Sandvik carbide teeth
NOTE: Only the best carbide is good enough for Karnasch core drills

138,56€ 153,60€

Laost otsas. Tellides tarneaeg nädalat

Electro-magnetic chuck Fine pole 250 x 500 mm

51-3939002

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

3833,08€ 4249,23€

Laost otsas. Tellides tarneaeg nädalat

Masinaalus OPTIMUM GU 1 VARIO, 0,75 kW

51-3491510

OPTIMUM GU 1 VARIO masinaalus 0,75 kW võimaldab lihvmasina kiiruse sujuvat reguleerimist. Integreeritud tsüklonväljatõmme, SIEMENS sagedusmuundur ja automaatne käivitus tagavad tõhusa ning puhta töökeskkonna.

Tehnilised andmed:

Mootori võimsus: kuni 0,75 kW
Kiiruse reguleerimine: sujuv (VARIO)
Perifeerne kiirus: 5–30 m/s
Sagedusmuundur: SIEMENS Sinamics V20
Väljatõmme: integreeritud tsüklonväljatõmme
Automaatne väljatõmbe käivitus: jah
Konstruktsioon: helisummutatud masinaalus
Tarnitakse ilma lihvpingita

Komplekti sisu:

GU 1 VARIO masinaalus
Integreeritud tsüklonväljatõmbesüsteem
SIEMENS Sinamics V20 sagedusmuundur
Automaatse käivituse juhtsüsteem
Helisummutatud alusraam

Märkus: lihvmasin tuleb tellida eraldi.

2765,76€ 3066,04€

Laost otsas. Tellides tarneaeg nädalat

Velcro pad Ø 150

51-3357802

For attachment to sanding plates
Allows easy application and removal of Velcro sanding sheets

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

8,05€ 8,93€

Laost otsas. Tellides tarneaeg nädalat

Väikedetailide väljalaske luuk

51-3887200

With drawer, max 300 x 300 mm
Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

514,00€ 569,80€

Laost otsas. Tellides tarneaeg nädalat

Core drill BLPRO55WLDM29MM

51-38720.131729

Core drill optimally suited for:

Steel < 500 N
Steel < 750 N
Steel < 900 N
Steel < 1100 N
Stainless steel < 900 N
Stainless steel>900 N
Alu < 10% Si
Alu>10% Si
Copper, brass, nickel, tin
Plastics GFK / CFK
cast iron
Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
rails

Good for:

Steel < 1400 N

Use possible with:

graphite

Characteristics of BLUE-LINE core drills:
ASP powder steel

Made of ASP powder steel for drilling even the most difficult
Materials such as railroad tracks, stainless steels, exotic alloys
Always available where maximum service life is required

Step hardened HSS core drill

Standard hardened HSS core drills in stages
As a result extremely hard tooth tips (68 HRC) and still flexible core drill

Completely sanded from the full material

This fine grinding increases the cutting performance while reducing friction
For more service life

unique and patented Durablue coating

Extreme surface hardness and smoothness
Extreme service life even under less than ideal working conditions such as overhead work, dry drilling, etc

Five cutting geometries

Specially adapted cutting geometries especially for the different diameters and cutting depths

123,53€ 136,95€

Laost otsas. Tellides tarneaeg nädalat