Elektri- ja akutööriistad, tööpingid

Tarvikud elektritööriistadele ja tööpinkidele

Generaatorid

Vaata kui Tabel Nimekiri

Sorteerimine

Kuva leheküljel

Core drill HARD-LINE 55 Weldon Ø 62 mm

51-38720.131662

Core drill optimally suited for:

Steel < 500 N
Steel < 750 N
Steel < 900 N
Steel < 1100 N
Steel < 1400 N
Stainless steel < 900 N
Stainless steel>900 N
Alu < 10% Si
Alu>10% Si
Copper, brass, nickel, tin
Plastics GFK / CFK
cast iron
Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
graphite

Good for:

rails

Properties of the carbide-tipped HARD-LINE core drills:
Pre-Intermediate-trimmer geometry

manufactured in elaborate pre-middle trimmer geometry
Thus: vibration-free, quiet and easy cutting with maximum service life

Conical spiral

Made with conical spiral
Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

Sandvik carbide teeth

Only equipped with Sandvik carbide teeth
NOTE: Only the best carbide is good enough for Karnasch core drills

Suitable for core drills:
Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
Manufacturer
Karnasch
Straße des Friedens 10, 15848 Görsdorf, Germany
www.karnasch.de

140,32€ 175,40€

On request in weeks

Core drill HARD-LINE 55 Weldon Ø 103 mm

51-38720.1316103

Core drill optimally suited for:

Steel < 500 N
Steel < 750 N
Steel < 900 N
Steel < 1100 N
Steel < 1400 N
Stainless steel < 900 N
Stainless steel>900 N
Alu < 10% Si
Alu>10% Si
Copper, brass, nickel, tin
Plastics GFK / CFK
cast iron
Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
graphite

Good for:

rails

Properties of the carbide-tipped HARD-LINE core drills:
Pre-Intermediate-trimmer geometry

manufactured in elaborate pre-middle trimmer geometry
Thus: vibration-free, quiet and easy cutting with maximum service life

Conical spiral

Made with conical spiral
Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

Sandvik carbide teeth

Only equipped with Sandvik carbide teeth
NOTE: Only the best carbide is good enough for Karnasch core drills

360,20€ 450,24€

On request in weeks

Thermo drill THERMDRILL CUT M10 long

51-3060150

Thermdrill replaces rivet nuts

With the Thermdrill process, you can easily create 100% torsion-proof and wobble-free threaded bushes from the existing material in just two steps. And at a fraction of the cost of rivet nuts.

100% torsion-proof
For steel, VA, non-ferrous metal, aluminum
For all common thread sizes
From 1.0 mm wall thickness
For pillar drills, milling machines and CNC (assuming sufficient speed and motor power)

Manufacturer
ONTOOL GmbH
Franz-Gruber-Platz 13, 64859 Eppertshausen, Germany
www.ontool.eu

179,96€ 224,95€

On request in weeks

Thermo drill THERMDRILL FORM M12 short

51-3060112

100% torsion-proof
For steel, VA, non-ferrous metal, aluminum
For all common thread sizes
From 1.0 mm wall thickness
For pillar drills, milling machines and CNC (assuming sufficient speed and motor power)

Manufacturer
ONTOOL GmbH
Franz-Gruber-Platz 13, 64859 Eppertshausen, Germany
www.ontool.eu

168,21€ 210,25€

On request in weeks

Contact wheel Ø 200 x 75 mm

51-3922076

Delivery without ball bearing
Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

89,22€ 111,53€

On request in weeks

Vario conversion with machine base GU 3 - 0.75 kW

51-3491511

Without grinder - must be ordered separately.
cooling water tray
Low space requirement

Vario drive with SIEMENS inverter drive Sinamics V20

sizeerer voltage range, advanced cooling and painted electronic components increase the robustness of the inverter
Stable operation under difficult mains conditions

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

1582,48€ 1978,10€

On request in weeks

Core drill HARD-LINE 55 Universal Ø 13 mm

51-38720.131613

Core drill optimally suited for:

Steel < 500 N
Steel < 750 N
Steel < 900 N
Steel < 1100 N
Steel < 1400 N
Stainless steel < 900 N
Stainless steel>900 N
Alu < 10% Si
Alu>10% Si
Copper, brass, nickel, tin
Plastics GFK / CFK
cast iron
Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
graphite

Good for:

rails

Properties of the carbide-tipped HARD-LINE core drills:
Pre-Intermediate-trimmer geometry

manufactured in elaborate pre-middle trimmer geometry
Thus: vibration-free, quiet and easy cutting with maximum service life

Conical spiral

Made with conical spiral
Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

Sandvik carbide teeth

Only equipped with Sandvik carbide teeth
NOTE: Only the best carbide is good enough for Karnasch core drills

48,34€ 60,41€

On request in weeks

Core drill HARD-LINE 55 Universal Ø 18 mm

51-38720.131618

Core drill optimally suited for:

Steel < 500 N
Steel < 750 N
Steel < 900 N
Steel < 1100 N
Steel < 1400 N
Stainless steel < 900 N
Stainless steel>900 N
Alu < 10% Si
Alu>10% Si
Copper, brass, nickel, tin
Plastics GFK / CFK
cast iron
Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
graphite

Good for:

rails

Properties of the carbide-tipped HARD-LINE core drills:
Pre-Intermediate-trimmer geometry

manufactured in elaborate pre-middle trimmer geometry
Thus: vibration-free, quiet and easy cutting with maximum service life

Conical spiral

Made with conical spiral
Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

Sandvik carbide teeth

Only equipped with Sandvik carbide teeth
NOTE: Only the best carbide is good enough for Karnasch core drills

48,34€ 60,41€

On request in weeks

Core drill HARD-LINE 80 Weldon Ø 23 mm

51-38720.165023

Core drill optimally suited for:

Steel < 500 N
Steel < 750 N
Steel < 900 N
Steel < 1100 N
Steel < 1400 N
Stainless steel < 900 N
Stainless steel>900 N
Alu < 10% Si
Alu>10% Si
Copper, brass, nickel, tin
Plastics GFK / CFK
cast iron
Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
graphite

Good for:

rails

Properties of the carbide-tipped HARD-LINE core drills:
Pre-Intermediate-trimmer geometry

manufactured in elaborate pre-middle trimmer geometry
Thus: vibration-free, quiet and easy cutting with maximum service life

Conical spiral

Made with conical spiral
Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

Sandvik carbide teeth

Only equipped with Sandvik carbide teeth
NOTE: Only the best carbide is good enough for Karnasch core drills

73,56€ 91,95€

On request in weeks

Core drill HARD-LINE 40 Universal, Ø 41 mm

51-38720.131541

Core drill optimally suited for:

Steel < 500 N
Steel < 750 N
Steel < 900 N
Steel < 1100 N
Steel < 1400 N
Stainless steel < 900 N
Stainless steel>900 N
Alu < 10% Si
Alu>10% Si
Copper, brass, nickel, tin
Plastics GFK / CFK
cast iron
Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
graphite

Good for:

rails

Properties of the carbide-tipped HARD-LINE core drills:
Pre-Intermediate-trimmer geometry

manufactured in elaborate pre-middle trimmer geometry
Thus: vibration-free, quiet and easy cutting with maximum service life

Conical spiral

Made with conical spiral
Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

Sandvik carbide teeth

Only equipped with Sandvik carbide teeth
NOTE: Only the best carbide is good enough for Karnasch core drills

77,44€ 96,79€

On request in weeks

Ejector pin Ø 7.98 x 118 mm

51-38720.1272

Suitable for core drills with diameter 61 - 150 mm and drilling depth 55 mm

Can be used with METALLKRAFT core drills:

HARD-LINE 40 Weldon Ø 61 - 150 mm

Manufacturer
Karnasch
Straße des Friedens 10, 15848 Görsdorf, Germany
www.karnasch.de

26,66€ 33,33€

On request in weeks

Ejector pin Ø 7.98 x 168 mm

51-38720.1408

Suitable for core drills with diameter 18 - 120 mm and drilling depth 110 mm
Together with receiving holder article number 38720.1291, this one-piece ejector pin can be used. It can be drilled without repositioning to 110 mm cutting depth in one operation. Robust and easy.

Can be used with METALLKRAFT core drills:

HARD-LINE 80 Weldon Ø 18 - 120 mm

Manufacturer
Karnasch
Straße des Friedens 10, 15848 Görsdorf, Germany
www.karnasch.de

27,78€ 34,72€

On request in weeks

Core drill HARD-LINE 80 Weldon Ø 28 mm

51-38720.165028

Core drill optimally suited for:

Steel < 500 N
Steel < 750 N
Steel < 900 N
Steel < 1100 N
Steel < 1400 N
Stainless steel < 900 N
Stainless steel>900 N
Alu < 10% Si
Alu>10% Si
Copper, brass, nickel, tin
Plastics GFK / CFK
cast iron
Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
graphite

Good for:

rails

Properties of the carbide-tipped HARD-LINE core drills:
Pre-Intermediate-trimmer geometry

manufactured in elaborate pre-middle trimmer geometry
Thus: vibration-free, quiet and easy cutting with maximum service life

Conical spiral

Made with conical spiral
Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

Sandvik carbide teeth

Only equipped with Sandvik carbide teeth
NOTE: Only the best carbide is good enough for Karnasch core drills

80,22€ 100,27€

On request in weeks

Substructure for tapping machine

51-4460006

Clamping table with 16 mm wide T-slots
Robust chassis with four swivel castors

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

943,91€ 1179,88€

On request in weeks

Core drill HARD-LINE 80 Weldon Ø 80 mm

51-38720.165080

Core drill optimally suited for:

Steel < 500 N
Steel < 750 N
Steel < 900 N
Steel < 1100 N
Steel < 1400 N
Stainless steel < 900 N
Stainless steel>900 N
Alu < 10% Si
Alu>10% Si
Copper, brass, nickel, tin
Plastics GFK / CFK
cast iron
Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
graphite

Good for:

rails

Properties of the carbide-tipped HARD-LINE core drills:
Pre-Intermediate-trimmer geometry

manufactured in elaborate pre-middle trimmer geometry
Thus: vibration-free, quiet and easy cutting with maximum service life

Conical spiral

Made with conical spiral
Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

Sandvik carbide teeth

Only equipped with Sandvik carbide teeth
NOTE: Only the best carbide is good enough for Karnasch core drills

284,54€ 355,68€

On request in weeks

Thermo drill THERMDRILL CUT M8 long

51-3060148

100% torsion-proof
For steel, VA, non-ferrous metal, aluminum
For all common thread sizes
From 1.0 mm wall thickness
For pillar drills, milling machines and CNC (assuming sufficient speed and motor power)

Manufacturer
ONTOOL GmbH
Franz-Gruber-Platz 13, 64859 Eppertshausen, Germany
www.ontool.eu

179,06€ 198,50€

On request in weeks

Core drill HARD-LINE 110 Weldon Ø 120 mm

51-38720.1660120

Core drill optimally suited for:

Steel < 500 N
Steel < 750 N
Steel < 900 N
Steel < 1100 N
Steel < 1400 N
Stainless steel < 900 N
Stainless steel>900 N
Alu < 10% Si
Alu>10% Si
Copper, brass, nickel, tin
Plastics GFK / CFK
cast iron
Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
graphite

Good for:

rails

Properties of the carbide-tipped HARD-LINE core drills:
Pre-Intermediate-trimmer geometry

manufactured in elaborate pre-middle trimmer geometry
Thus: vibration-free, quiet and easy cutting with maximum service life

Conical spiral

Made with conical spiral
Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

Sandvik carbide teeth

Only equipped with Sandvik carbide teeth
NOTE: Only the best carbide is good enough for Karnasch core drills

883,39€ 1104,23€

On request in weeks

Core drill HARD-LINE 40 Universal, Ø 61 mm

51-38720.131561

Core drill optimally suited for:

Steel < 500 N
Steel < 750 N
Steel < 900 N
Steel < 1100 N
Steel < 1400 N
Stainless steel < 900 N
Stainless steel>900 N
Alu < 10% Si
Alu>10% Si
Copper, brass, nickel, tin
Plastics GFK / CFK
cast iron
Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
graphite

Good for:

rails

Properties of the carbide-tipped HARD-LINE core drills:
Pre-Intermediate-trimmer geometry

manufactured in elaborate pre-middle trimmer geometry
Thus: vibration-free, quiet and easy cutting with maximum service life

Conical spiral

Made with conical spiral
Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

Sandvik carbide teeth

Only equipped with Sandvik carbide teeth
NOTE: Only the best carbide is good enough for Karnasch core drills

122,21€ 152,77€

On request in weeks

Core drill HARD-LINE 40 Universal, Ø 68 mm

51-38720.131568

Core drill optimally suited for:

Steel < 500 N
Steel < 750 N
Steel < 900 N
Steel < 1100 N
Steel < 1400 N
Stainless steel < 900 N
Stainless steel>900 N
Alu < 10% Si
Alu>10% Si
Copper, brass, nickel, tin
Plastics GFK / CFK
cast iron
Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
graphite

Good for:

rails

Properties of the carbide-tipped HARD-LINE core drills:
Pre-Intermediate-trimmer geometry

manufactured in elaborate pre-middle trimmer geometry
Thus: vibration-free, quiet and easy cutting with maximum service life

Conical spiral

Made with conical spiral
Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

Sandvik carbide teeth

Only equipped with Sandvik carbide teeth
NOTE: Only the best carbide is good enough for Karnasch core drills

145,77€ 182,22€

On request in weeks

Core drill HARD-LINE 55 Weldon Ø 105 mm

51-38720.1316105

Core drill optimally suited for:

Steel < 500 N
Steel < 750 N
Steel < 900 N
Steel < 1100 N
Steel < 1400 N
Stainless steel < 900 N
Stainless steel>900 N
Alu < 10% Si
Alu>10% Si
Copper, brass, nickel, tin
Plastics GFK / CFK
cast iron
Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
graphite

Good for:

rails

Properties of the carbide-tipped HARD-LINE core drills:
Pre-Intermediate-trimmer geometry

manufactured in elaborate pre-middle trimmer geometry
Thus: vibration-free, quiet and easy cutting with maximum service life

Conical spiral

Made with conical spiral
Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

Sandvik carbide teeth

Only equipped with Sandvik carbide teeth
NOTE: Only the best carbide is good enough for Karnasch core drills

386,63€ 483,29€

On request in weeks