Menüü
Otsing

Sisseloginud kliendile kuni -10%

Näita hindu KM-ga
ET
Ostukorv Sulge

Ostukorv on tühi

Kõik kategooriad
    Menüü Sulge

    Sisseloginud kliendile kuni -10%

    Kinnitusvahendid
    Kinnitusvahendid
    Elektri- ja akutööriistad, tööpingid
    Elektri- ja akutööriistad, tööpingid
    Käsitööriistad
    Käsitööriistad
    Märke- ja mõõteriistad
    Märke- ja mõõteriistad
    Ehitus ja viimistlus
    Ehitus ja viimistlus
    Aia- ja metsatehnika
    Aia- ja metsatehnika
    Kodukaubad ja koristusseadmed
    Kodukaubad ja koristusseadmed
    Garaažitehnika ja autotarvikud
    Garaažitehnika ja autotarvikud
    Ohutus- ja töökaitsevahendid
    Ohutus- ja töökaitsevahendid
    Elektritarvikud ja valgustid
    Elektritarvikud ja valgustid
    • Avaleht /
    • Elektri- ja akutööriistad, tööpingid

    Elektri- ja akutööriistad, tööpingid

    Elektrilised käsitööriistad

    Elektrilised käsitööriistad

    Akutööriistad

    Akutööriistad

    Puidutööpingid

    Puidutööpingid

    Metallitööpingid

    Metallitööpingid

    Keevitusseadmed

    Keevitusseadmed

    Tarvikud elektritööriistadele ja tööpinkidele

    Tarvikud elektritööriistadele ja tööpinkidele

    Generaatorid

    Generaatorid

    Vaata kui Tabel Nimekiri
    Sorteerimine
    Kuva leheküljel
    Core drill HARD-LINE 80 Weldon Ø 19 mm
    Core drill HARD-LINE 80 Weldon Ø 19 mm
    51-38720.165019
    Core drill optimally suited for:
    • Steel < 500 N
    • Steel < 750 N
    • Steel < 900 N
    • Steel < 1100 N
    • Steel < 1400 N
    • Stainless steel < 900 N
    • Stainless steel>900 N
    • Alu < 10% Si
    • Alu>10% Si
    • Copper, brass, nickel, tin
    • Plastics GFK / CFK
    • cast iron
    • Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
    • graphite

    Good for:
    • rails


    Properties of the carbide-tipped HARD-LINE core drills:
    Pre-Intermediate-trimmer geometry
    • manufactured in elaborate pre-middle trimmer geometry
    • Thus: vibration-free, quiet and easy cutting with maximum service life

    Conical spiral
    • Made with conical spiral
    • Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

    Sandvik carbide teeth
    • Only equipped with Sandvik carbide teeth
    • NOTE: Only the best carbide is good enough for Karnasch core drills

    Suitable for core drills:
    Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
    Manufacturer
    Karnasch
    Straße des Friedens 10, 15848 Görsdorf, Germany
    www.karnasch.de

    73,56€ 91,95€
    On request in weeks
    Core drill HARD-LINE 55 Weldon Ø 95 mm
    Core drill HARD-LINE 55 Weldon Ø 95 mm
    51-38720.131695
    Core drill optimally suited for:
    • Steel < 500 N
    • Steel < 750 N
    • Steel < 900 N
    • Steel < 1100 N
    • Steel < 1400 N
    • Stainless steel < 900 N
    • Stainless steel>900 N
    • Alu < 10% Si
    • Alu>10% Si
    • Copper, brass, nickel, tin
    • Plastics GFK / CFK
    • cast iron
    • Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
    • graphite

    Good for:
    • rails


    Properties of the carbide-tipped HARD-LINE core drills:
    Pre-Intermediate-trimmer geometry
    • manufactured in elaborate pre-middle trimmer geometry
    • Thus: vibration-free, quiet and easy cutting with maximum service life

    Conical spiral
    • Made with conical spiral
    • Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

    Sandvik carbide teeth
    • Only equipped with Sandvik carbide teeth
    • NOTE: Only the best carbide is good enough for Karnasch core drills

    Suitable for core drills:
    Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
    Manufacturer
    Karnasch
    Straße des Friedens 10, 15848 Görsdorf, Germany
    www.karnasch.de

    297,09€ 371,37€
    On request in weeks
    Core drill HARD-LINE 55 Weldon Ø 125 mm
    Core drill HARD-LINE 55 Weldon Ø 125 mm
    51-38720.1316125
    Core drill optimally suited for:
    • Steel < 500 N
    • Steel < 750 N
    • Steel < 900 N
    • Steel < 1100 N
    • Steel < 1400 N
    • Stainless steel < 900 N
    • Stainless steel>900 N
    • Alu < 10% Si
    • Alu>10% Si
    • Copper, brass, nickel, tin
    • Plastics GFK / CFK
    • cast iron
    • Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
    • graphite

    Good for:
    • rails


    Properties of the carbide-tipped HARD-LINE core drills:
    Pre-Intermediate-trimmer geometry
    • manufactured in elaborate pre-middle trimmer geometry
    • Thus: vibration-free, quiet and easy cutting with maximum service life

    Conical spiral
    • Made with conical spiral
    • Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

    Sandvik carbide teeth
    • Only equipped with Sandvik carbide teeth
    • NOTE: Only the best carbide is good enough for Karnasch core drills

    Suitable for core drills:
    Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
    Manufacturer
    Karnasch
    Straße des Friedens 10, 15848 Görsdorf, Germany
    www.karnasch.de

    594,41€ 743,01€
    On request in weeks
    Core drill HARD-LINE 55 Universal Ø 38 mm
    Core drill HARD-LINE 55 Universal Ø 38 mm
    51-38720.131638
    Core drill optimally suited for:
    • Steel < 500 N
    • Steel < 750 N
    • Steel < 900 N
    • Steel < 1100 N
    • Steel < 1400 N
    • Stainless steel < 900 N
    • Stainless steel>900 N
    • Alu < 10% Si
    • Alu>10% Si
    • Copper, brass, nickel, tin
    • Plastics GFK / CFK
    • cast iron
    • Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
    • graphite

    Good for:
    • rails


    Properties of the carbide-tipped HARD-LINE core drills:
    Pre-Intermediate-trimmer geometry
    • manufactured in elaborate pre-middle trimmer geometry
    • Thus: vibration-free, quiet and easy cutting with maximum service life

    Conical spiral
    • Made with conical spiral
    • Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

    Sandvik carbide teeth
    • Only equipped with Sandvik carbide teeth
    • NOTE: Only the best carbide is good enough for Karnasch core drills

    Suitable for core drills:
    Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
    Manufacturer
    Karnasch
    Straße des Friedens 10, 15848 Görsdorf, Germany
    www.karnasch.de

    80,18€ 88,88€
    On request in weeks
    Core drill HARD-LINE 110 Weldon Ø 110 mm
    Core drill HARD-LINE 110 Weldon Ø 110 mm
    51-38720.1660110
    Core drill optimally suited for:
    • Steel < 500 N
    • Steel < 750 N
    • Steel < 900 N
    • Steel < 1100 N
    • Steel < 1400 N
    • Stainless steel < 900 N
    • Stainless steel>900 N
    • Alu < 10% Si
    • Alu>10% Si
    • Copper, brass, nickel, tin
    • Plastics GFK / CFK
    • cast iron
    • Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
    • graphite

    Good for:
    • rails


    Properties of the carbide-tipped HARD-LINE core drills:
    Pre-Intermediate-trimmer geometry
    • manufactured in elaborate pre-middle trimmer geometry
    • Thus: vibration-free, quiet and easy cutting with maximum service life

    Conical spiral
    • Made with conical spiral
    • Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

    Sandvik carbide teeth
    • Only equipped with Sandvik carbide teeth
    • NOTE: Only the best carbide is good enough for Karnasch core drills

    Suitable for core drills:
    Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
    Manufacturer
    Karnasch
    Straße des Friedens 10, 15848 Görsdorf, Germany
    www.karnasch.de

    597,73€ 747,16€
    On request in weeks
    Core drill BLUE-LINE PRO 55 Weldon, Ø 20 mm
    Core drill BLUE-LINE PRO 55 Weldon, Ø 20 mm
    51-38720.131720
    Core drill optimally suited for:
    • Steel < 500 N
    • Steel < 750 N
    • Steel < 900 N
    • Steel < 1100 N
    • Stainless steel < 900 N
    • Stainless steel>900 N
    • Alu < 10% Si
    • Alu>10% Si
    • Copper, brass, nickel, tin
    • Plastics GFK / CFK
    • cast iron
    • Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
    • rails

    Good for:
    • Steel < 1400 N

    Use possible with:
    • graphite


    Characteristics of BLUE-LINE core drills:
    ASP powder steel
    • Made of ASP powder steel for drilling even the most difficult
      Materials such as railroad tracks, stainless steels, exotic alloys
    • Always available where maximum service life is required

    Step hardened HSS core drill
    • Standard hardened HSS core drills in stages
    • As a result extremely hard tooth tips (68 HRC) and still flexible core drill

    Completely sanded from the full material
    • This fine grinding increases the cutting performance while reducing friction
    • For more service life

    unique and patented Durablue coating
    • Extreme surface hardness and smoothness
    • Extreme service life even under less than ideal working conditions such as overhead work, dry drilling, etc

    Five cutting geometries
    • Specially adapted cutting geometries especially for the different diameters and cutting depths

    Suitable for core drills:
    Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
    Manufacturer
    Karnasch
    Straße des Friedens 10, 15848 Görsdorf, Germany
    www.karnasch.de

    100,11€ 125,13€
    On request in weeks
    Core drill HARD-LINE 55 Universal Ø 25 mm
    Core drill HARD-LINE 55 Universal Ø 25 mm
    51-38720.131625
    Core drill optimally suited for:
    • Steel < 500 N
    • Steel < 750 N
    • Steel < 900 N
    • Steel < 1100 N
    • Steel < 1400 N
    • Stainless steel < 900 N
    • Stainless steel>900 N
    • Alu < 10% Si
    • Alu>10% Si
    • Copper, brass, nickel, tin
    • Plastics GFK / CFK
    • cast iron
    • Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
    • graphite

    Good for:
    • rails


    Properties of the carbide-tipped HARD-LINE core drills:
    Pre-Intermediate-trimmer geometry
    • manufactured in elaborate pre-middle trimmer geometry
    • Thus: vibration-free, quiet and easy cutting with maximum service life

    Conical spiral
    • Made with conical spiral
    • Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

    Sandvik carbide teeth
    • Only equipped with Sandvik carbide teeth
    • NOTE: Only the best carbide is good enough for Karnasch core drills

    Suitable for core drills:
    Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
    Manufacturer
    Karnasch
    Straße des Friedens 10, 15848 Görsdorf, Germany
    www.karnasch.de

    56,25€ 62,36€
    On request in weeks
    Thermo drill + thread former THERMDRILL Thread tool set FORM M3 short
    Thermo drill + thread former THERMDRILL Thread tool set FORM M3 short
    51-3060503
    Thermdrill replaces rivet nuts

    With the Thermdrill process, you can easily create 100% torsion-proof and wobble-free threaded bushes from the existing material in just two steps. And at a fraction of the cost of rivet nuts.
    • 100% torsion-proof
    • For steel, VA, non-ferrous metal, aluminum
    • For all common thread sizes
    • From 1.0 mm wall thickness
    • For pillar drills, milling machines and CNC (assuming sufficient speed and motor power)

    Manufacturer
    ONTOOL GmbH
    Franz-Gruber-Platz 13, 64859 Eppertshausen, Germany
    www.ontool.eu

    99,97€ 124,97€
    On request in weeks
    Core drill HARD-LINE 80 Weldon Ø 52 mm
    Core drill HARD-LINE 80 Weldon Ø 52 mm
    51-38720.165052
    Core drill optimally suited for:
    • Steel < 500 N
    • Steel < 750 N
    • Steel < 900 N
    • Steel < 1100 N
    • Steel < 1400 N
    • Stainless steel < 900 N
    • Stainless steel>900 N
    • Alu < 10% Si
    • Alu>10% Si
    • Copper, brass, nickel, tin
    • Plastics GFK / CFK
    • cast iron
    • Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
    • graphite

    Good for:
    • rails


    Properties of the carbide-tipped HARD-LINE core drills:
    Pre-Intermediate-trimmer geometry
    • manufactured in elaborate pre-middle trimmer geometry
    • Thus: vibration-free, quiet and easy cutting with maximum service life

    Conical spiral
    • Made with conical spiral
    • Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

    Sandvik carbide teeth
    • Only equipped with Sandvik carbide teeth
    • NOTE: Only the best carbide is good enough for Karnasch core drills

    Suitable for core drills:
    Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
    Manufacturer
    Karnasch
    Straße des Friedens 10, 15848 Görsdorf, Germany
    www.karnasch.de

    163,54€ 204,43€
    On request in weeks
    Core drill HARD-LINE 80 Weldon Ø 24 mm
    Core drill HARD-LINE 80 Weldon Ø 24 mm
    51-38720.165024
    Core drill optimally suited for:
    • Steel < 500 N
    • Steel < 750 N
    • Steel < 900 N
    • Steel < 1100 N
    • Steel < 1400 N
    • Stainless steel < 900 N
    • Stainless steel>900 N
    • Alu < 10% Si
    • Alu>10% Si
    • Copper, brass, nickel, tin
    • Plastics GFK / CFK
    • cast iron
    • Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
    • graphite

    Good for:
    • rails


    Properties of the carbide-tipped HARD-LINE core drills:
    Pre-Intermediate-trimmer geometry
    • manufactured in elaborate pre-middle trimmer geometry
    • Thus: vibration-free, quiet and easy cutting with maximum service life

    Conical spiral
    • Made with conical spiral
    • Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

    Sandvik carbide teeth
    • Only equipped with Sandvik carbide teeth
    • NOTE: Only the best carbide is good enough for Karnasch core drills

    Suitable for core drills:
    Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
    Manufacturer
    Karnasch
    Straße des Friedens 10, 15848 Görsdorf, Germany
    www.karnasch.de

    73,56€ 91,95€
    On request in weeks
    Core drill BLPRO55WLDM36MM
    Core drill BLPRO55WLDM36MM
    51-38720.131736
    Core drill optimally suited for:
    • Steel < 500 N
    • Steel < 750 N
    • Steel < 900 N
    • Steel < 1100 N
    • Stainless steel < 900 N
    • Stainless steel>900 N
    • Alu < 10% Si
    • Alu>10% Si
    • Copper, brass, nickel, tin
    • Plastics GFK / CFK
    • cast iron
    • Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
    • rails

    Good for:
    • Steel < 1400 N

    Use possible with:
    • graphite


    Characteristics of BLUE-LINE core drills:
    ASP powder steel
    • Made of ASP powder steel for drilling even the most difficult
      Materials such as railroad tracks, stainless steels, exotic alloys
    • Always available where maximum service life is required

    Step hardened HSS core drill
    • Standard hardened HSS core drills in stages
    • As a result extremely hard tooth tips (68 HRC) and still flexible core drill

    Completely sanded from the full material
    • This fine grinding increases the cutting performance while reducing friction
    • For more service life

    unique and patented Durablue coating
    • Extreme surface hardness and smoothness
    • Extreme service life even under less than ideal working conditions such as overhead work, dry drilling, etc

    Five cutting geometries
    • Specially adapted cutting geometries especially for the different diameters and cutting depths

    Suitable for core drills:
    Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
    Manufacturer
    Karnasch
    Straße des Friedens 10, 15848 Görsdorf, Germany
    www.karnasch.de

    125,33€ 156,66€
    On request in weeks
    Thermo drill THERMDRILL CUT M4 short
    Thermo drill THERMDRILL CUT M4 short
    51-3060164
    Thermdrill replaces rivet nuts

    With the Thermdrill process, you can easily create 100% torsion-proof and wobble-free threaded bushes from the existing material in just two steps. And at a fraction of the cost of rivet nuts.
    • 100% torsion-proof
    • For steel, VA, non-ferrous metal, aluminum
    • For all common thread sizes
    • From 1.0 mm wall thickness
    • For pillar drills, milling machines and CNC (assuming sufficient speed and motor power)

    Manufacturer
    ONTOOL GmbH
    Franz-Gruber-Platz 13, 64859 Eppertshausen, Germany
    www.ontool.eu

    96,45€ 120,55€
    On request in weeks
    Core drill HARD-LINE 110 Weldon Ø 90 mm
    Core drill HARD-LINE 110 Weldon Ø 90 mm
    51-38720.166090
    Core drill optimally suited for:
    • Steel < 500 N
    • Steel < 750 N
    • Steel < 900 N
    • Steel < 1100 N
    • Steel < 1400 N
    • Stainless steel < 900 N
    • Stainless steel>900 N
    • Alu < 10% Si
    • Alu>10% Si
    • Copper, brass, nickel, tin
    • Plastics GFK / CFK
    • cast iron
    • Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
    • graphite

    Good for:
    • rails


    Properties of the carbide-tipped HARD-LINE core drills:
    Pre-Intermediate-trimmer geometry
    • manufactured in elaborate pre-middle trimmer geometry
    • Thus: vibration-free, quiet and easy cutting with maximum service life

    Conical spiral
    • Made with conical spiral
    • Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

    Sandvik carbide teeth
    • Only equipped with Sandvik carbide teeth
    • NOTE: Only the best carbide is good enough for Karnasch core drills

    Suitable for core drills:
    Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
    Manufacturer
    Karnasch
    Straße des Friedens 10, 15848 Görsdorf, Germany
    www.karnasch.de

    505,41€ 631,77€
    On request in weeks
    Thermo drill THERMDRILL FORM M4 long
    Thermo drill THERMDRILL FORM M4 long
    51-3060124
    Thermdrill replaces rivet nuts

    With the Thermdrill process, you can easily create 100% torsion-proof and wobble-free threaded bushes from the existing material in just two steps. And at a fraction of the cost of rivet nuts.
    • 100% torsion-proof
    • For steel, VA, non-ferrous metal, aluminum
    • For all common thread sizes
    • From 1.0 mm wall thickness
    • For pillar drills, milling machines and CNC (assuming sufficient speed and motor power)

    Manufacturer
    ONTOOL GmbH
    Franz-Gruber-Platz 13, 64859 Eppertshausen, Germany
    www.ontool.eu

    78,81€ 98,52€
    On request in weeks
    Core drill HARD-LINE 55 Weldon Ø 67 mm
    Core drill HARD-LINE 55 Weldon Ø 67 mm
    51-38720.131667
    Core drill optimally suited for:
    • Steel < 500 N
    • Steel < 750 N
    • Steel < 900 N
    • Steel < 1100 N
    • Steel < 1400 N
    • Stainless steel < 900 N
    • Stainless steel>900 N
    • Alu < 10% Si
    • Alu>10% Si
    • Copper, brass, nickel, tin
    • Plastics GFK / CFK
    • cast iron
    • Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
    • graphite

    Good for:
    • rails


    Properties of the carbide-tipped HARD-LINE core drills:
    Pre-Intermediate-trimmer geometry
    • manufactured in elaborate pre-middle trimmer geometry
    • Thus: vibration-free, quiet and easy cutting with maximum service life

    Conical spiral
    • Made with conical spiral
    • Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

    Sandvik carbide teeth
    • Only equipped with Sandvik carbide teeth
    • NOTE: Only the best carbide is good enough for Karnasch core drills

    Suitable for core drills:
    Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
    Manufacturer
    Karnasch
    Straße des Friedens 10, 15848 Görsdorf, Germany
    www.karnasch.de

    164,65€ 205,82€
    On request in weeks
    Thermo drill THERMDRILL CUT 1/2" long
    Thermo drill THERMDRILL CUT 1/2" long
    51-3060354
    Thermdrill replaces rivet nuts

    With the Thermdrill process, you can easily create 100% torsion-proof and wobble-free threaded bushes from the existing material in just two steps. And at a fraction of the cost of rivet nuts.
    • 100% torsion-proof
    • For steel, VA, non-ferrous metal, aluminum
    • For all common thread sizes
    • From 1.0 mm wall thickness
    • For pillar drills, milling machines and CNC (assuming sufficient speed and motor power)

    Manufacturer
    ONTOOL GmbH
    Franz-Gruber-Platz 13, 64859 Eppertshausen, Germany
    www.ontool.eu

    182,32€ 227,90€
    On request in weeks
    Core drill HARD-LINE 55 Universal Ø 41 mm
    Core drill HARD-LINE 55 Universal Ø 41 mm
    51-38720.131641
    Core drill optimally suited for:
    • Steel < 500 N
    • Steel < 750 N
    • Steel < 900 N
    • Steel < 1100 N
    • Steel < 1400 N
    • Stainless steel < 900 N
    • Stainless steel>900 N
    • Alu < 10% Si
    • Alu>10% Si
    • Copper, brass, nickel, tin
    • Plastics GFK / CFK
    • cast iron
    • Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
    • graphite

    Good for:
    • rails


    Properties of the carbide-tipped HARD-LINE core drills:
    Pre-Intermediate-trimmer geometry
    • manufactured in elaborate pre-middle trimmer geometry
    • Thus: vibration-free, quiet and easy cutting with maximum service life

    Conical spiral
    • Made with conical spiral
    • Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

    Sandvik carbide teeth
    • Only equipped with Sandvik carbide teeth
    • NOTE: Only the best carbide is good enough for Karnasch core drills

    Suitable for core drills:
    Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
    Manufacturer
    Karnasch
    Straße des Friedens 10, 15848 Görsdorf, Germany
    www.karnasch.de

    85,65€ 107,06€
    On request in weeks
    Core drill HARD-LINE 80 Weldon Ø 110 mm
    Core drill HARD-LINE 80 Weldon Ø 110 mm
    51-38720.1650110
    Core drill optimally suited for:
    • Steel < 500 N
    • Steel < 750 N
    • Steel < 900 N
    • Steel < 1100 N
    • Steel < 1400 N
    • Stainless steel < 900 N
    • Stainless steel>900 N
    • Alu < 10% Si
    • Alu>10% Si
    • Copper, brass, nickel, tin
    • Plastics GFK / CFK
    • cast iron
    • Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
    • graphite

    Good for:
    • rails


    Properties of the carbide-tipped HARD-LINE core drills:
    Pre-Intermediate-trimmer geometry
    • manufactured in elaborate pre-middle trimmer geometry
    • Thus: vibration-free, quiet and easy cutting with maximum service life

    Conical spiral
    • Made with conical spiral
    • Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

    Sandvik carbide teeth
    • Only equipped with Sandvik carbide teeth
    • NOTE: Only the best carbide is good enough for Karnasch core drills

    Suitable for core drills:
    Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
    Manufacturer
    Karnasch
    Straße des Friedens 10, 15848 Görsdorf, Germany
    www.karnasch.de

    553,08€ 691,35€
    On request in weeks
    Core drill HARD-LINE 110 Weldon Ø 67 mm
    Core drill HARD-LINE 110 Weldon Ø 67 mm
    51-38720.166067
    Core drill optimally suited for:
    • Steel < 500 N
    • Steel < 750 N
    • Steel < 900 N
    • Steel < 1100 N
    • Steel < 1400 N
    • Stainless steel < 900 N
    • Stainless steel>900 N
    • Alu < 10% Si
    • Alu>10% Si
    • Copper, brass, nickel, tin
    • Plastics GFK / CFK
    • cast iron
    • Hardox, Hastelloy, Inconell, Nimonic, Exotic materials
    • graphite

    Good for:
    • rails


    Properties of the carbide-tipped HARD-LINE core drills:
    Pre-Intermediate-trimmer geometry
    • manufactured in elaborate pre-middle trimmer geometry
    • Thus: vibration-free, quiet and easy cutting with maximum service life

    Conical spiral
    • Made with conical spiral
    • Thus: clean chip flow and highest cutting performance, even with difficult materials (heavy-duty machinists)

    Sandvik carbide teeth
    • Only equipped with Sandvik carbide teeth
    • NOTE: Only the best carbide is good enough for Karnasch core drills

    Suitable for core drills:
    Metallkraft, Alfra-Rotabest + Alfra Rota-Quick, BDS + BDS Keyless, Bux, Bektop, Euroboor, Evolution, Hougen, Jancy, Magbroon, Magtron, Magnetor, Promag, Rotabroach, Ruko, Universal ...
    Manufacturer
    Karnasch
    Straße des Friedens 10, 15848 Görsdorf, Germany
    www.karnasch.de

    168,54€ 210,68€
    On request in weeks
    Contact wheel Ø 200 x 150 mm
    Contact wheel Ø 200 x 150 mm
    51-3922151
    Delivery without ball bearing
    Manufacturer
    Stürmer Maschinen GmbH
    Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
    info@stuermer-maschinen.de

    183,14€ 228,92€
    On request in weeks
    Hinnavahemik
    Kategooria
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
    Laoseis
    Tootjad
    Kvaliteediklass
    Sobivus materjalile
    Kaubamärk
    Läbimõõt mm
    Komplekt
    Otsik
    Pikkus mm
    Võimsus W
    Pikkus m
    Pinge (V)
    Puuritav materjal
    Ketta paksus mm
    Tarvikukinnitus
    Laius mm
    Puuri tüüp
    Tööriistakinnitus
    Otsiku tüüp
    Löögifunktsioon
    Lihvlindi mõõdud mm
    Aku mahutavus Ah
    Maks. väändemoment
    Löögivõimsus
    Valgusvoog lm
    Paksus mm
    Värvus
    Alumiinium
    Tootlikkus
    Pinge mõõtevahemik V
    USB-laadimine
    Populaarsed märksõnad
    Vaata kõiki

    AIRCRAFT

    AIRCRAFT

    AIRPRESS

    AIRPRESS

    ALTRAD

    ALTRAD

    ATHLET

    ATHLET

    ATIKA

    ATIKA

    BASSO

    BASSO

    BENDOF

    BENDOF

    BERNARDO

    BERNARDO

    BESSEY

    BESSEY

    BMI

    BMI

    BOEHM

    BOEHM

    BOHLE

    BOHLE

    BOSCH

    BOSCH

    BOSCHPRO

    BOSCHPRO

    BOSTIK

    BOSTIK

    BRENNENSTUHL

    BRENNENSTUHL

    CARBIDE

    CARBIDE

    CLEANCRAFT

    CLEANCRAFT

    COBRA

    COBRA

    CYNEL

    CYNEL

    DEFORT

    DEFORT

    DENBRAVEN

    DENBRAVEN

    DEWALT

    DEWALT

    DIAGER

    DIAGER

    DOMAX

    DOMAX

    DREMEL

    DREMEL

    DREUMEX

    DREUMEX

    DRONCO

    DRONCO

    EMHART

    EMHART

    ERDI

    ERDI

    ETANCO

    ETANCO

    FARAONE

    FARAONE

    FISKARS

    FISKARS

    FLIR

    FLIR

    FREUND

    FREUND

    FUJITSU

    FUJITSU

    GMAN

    GMAN

    GP

    GP

    GRAPHITE

    GRAPHITE

    HAMMERJACK

    HAMMERJACK

    HAZET

    HAZET

    HiKOKI

    HiKOKI

    HIKOKIT

    HIKOKIT

    HIKOKIV

    HIKOKIV

    HJBUILDING

    HJBUILDING

    HJCEMICALS

    HJCEMICALS

    HJFASTENERS

    HJFASTENERS

    HJTOOLS

    HJTOOLS

    HJTOOLS-1

    HJTOOLS-1

    HOLZKRAFT

    HOLZKRAFT

    HOLZMANN

    HOLZMANN

    HOLZSTAR

    HOLZSTAR

    HULTAFORS

    HULTAFORS

    JOKARI

    JOKARI

    KAEM

    KAEM

    KEMPER

    KEMPER

    KIEL

    KIEL

    KNIPEX

    KNIPEX

    KOMELON

    KOMELON

    KRINO

    KRINO

    KSTOOLS

    KSTOOLS

    KÄRCHER

    KÄRCHER

    LINDB

    LINDB

    LOCTITE

    LOCTITE

    LTI-TOOLS

    LTI-TOOLS

    LUKAS

    LUKAS

    MAKITA

    MAKITA

    MAKITAT

    MAKITAT

    METALLKRAFT

    METALLKRAFT

    METRICA

    METRICA

    MFT

    MFT

    MIDWEST

    MIDWEST

    MORSE

    MORSE

    MUNKFORS

    MUNKFORS

    NEDO

    NEDO

    NEO

    NEO

    NIKO

    NIKO

    NORDIC

    NORDIC

    NWS

    NWS

    OLFA

    OLFA

    OPTIMUM

    OPTIMUM

    OSBORN

    OSBORN

    PANASONIC

    PANASONIC

    PENOSIL

    PENOSIL

    PICA

    PICA

    PRESSOL

    PRESSOL

    PROCELL

    PROCELL

    REMS

    REMS

    RENNSTEIG

    RENNSTEIG

    RODCRAFT

    RODCRAFT

    SCHWEISSKRAFT

    SCHWEISSKRAFT

    SJÖBERGS

    SJÖBERGS

    SOLA

    SOLA

    SPAX

    SPAX

    SRC

    SRC

    STUBAI

    STUBAI

    ZETA

    ZETA

    TACWISE

    TACWISE

    TAJIMA

    TAJIMA

    TEROSON

    TEROSON
    Ettevõttest
    E-pood
    Kauplused
    Makseviisid
    Autoriõigus © 2026 Hammerjack. Kõik õigused kaitstud.
    Kinnitusvahendid
    Kinnitusvahendid
    Poldid
     
    Kuuskantpoldid
    Puidupoldid
    Liblikpoldid
    Sisekuuskantpoldid
    Muud poldid
    Metallikruvid
    Mutrid
     
    Kuuskantmutrid
    Kroonmutrid
    Kübarmutrid
    Lukustusmutrid
    Liblikmutrid
    Keevismutrid
    Kraega mutrid
    Trapetsmutrid
    Aas- ja silmusmutrid
    Mööblimutrid
    Seibid
     
    Ümarad seibid
    Lukustusseibid
    Nelikantseibid
    Muud seibid
    Keermevardad
     
    Keermelatid
    Trapetslatid
    Keermestatud torud
    Kruvid
     
    Puidukruvid
    Plekikruvid
    Puurkruvid
    Katusekruvid
    Kipsikruvid
    Erikruvid
    Terrassikruvid
    Needid
     
    Tõmbeneedid
    Neetmutrid
    Löödavad needid
    Tihvtid, splindid
     
    Tihvtid
    Splindid
    Lukustusrõngad
    Eritooted
     
    Konksud
    Lengikorgid ja kruvikatted
    Toruklambrid
    Keermemuhvid
    Voolikuklambrid
    Tüüblid, ankrud ja betoonikruvid
     
    Betooniankrud
    Tüüblid
    Keemilise ankru polt ja tüübel
    Kipsplaadi tüüblid, ankrud ja konksud
    Nurgikud ja naelutusplaadid
     
    Kinnitusnurgikud
    Kinnitusplaadid
    Kinnitusdetailid
    Montaažilindid
    Postijalad
    Prussikingad
    Keermestatud toru kandurid
    Voodrilauaklambrid
    Profiilrauad
    Ehituskobad
    Tarvikud betoonitöödeks
     
    Armatuurikandurid
    Ehituskiilud
    Sidumistraat
    Naelad
     
    Naelad ja liistunalenad
    Naelad -ja klambrid suruõhutööriistadele
    Paigalduskomplektid
    Trossid, ketid ja nende tarvikud
     
    Trossid ja -tarvikud
    Ketid ja -tarvikud
    Mööblipoldid ja -kruvid
     
    Mööblikruvi
    Mööblipolt
    Montaažikruvi
    Riivid, hinged, kiigekonksud
     
    Riivid ja hinged
    Kiigekonksud
    Aknanurgad
    Elektri- ja akutööriistad, tööpingid
    Elektri- ja akutööriistad, tööpingid
    Elektrilised käsitööriistad
     
    Liimipüstolid
    Puurimine ja kinnitamine
    Betoonitööriistad
    Metallitööriistad
    Puutööriistad
    Dremel
    Kuumapuhurid
    Multifunktsionaalsed tööriistad
    Erinevad tööriistad
    Varuosad
    Akutööriistad
     
    Akutrellid ja -kruvikeerajad
    Akulöökmutri- ja kruvikeerajad
    Akulihvmasinad
    Akusaed ja -höövlid
    Akukeermelatilõikurid ja -armatuuripainutajad
    Akutööriistade komplektid
    Akunaela -ja klambripüssid
    Akud ja laadijad
    Erinevad akutööriistad
    Akulambid
    Akuraadiod
    Aku-universaaltööriistad
    Akuplekilõikurid
    Puidutööpingid
     
    Puurpingid
    Lihvpingid
    Muud puidutöömasinad
    Puidufreespingid
    Puidutreipingid ja tarvikud
    Puruimejad
    Rihthöövel-paksusmasinad
    Saepingid
    Lint- ja jõhvsaed
    Puidutööpinkide lisad
    Universaalsed puidutööpingid
    Varuosad puidutöö-pinkidele
    Metallitööpingid
     
    Magnetstatiiviga trellid
    Metalli freespingid
    Metalli puurpingid
    Metalli lintsaed
    Metalli treipingid
    Metalli valtsimis- ja lõikepingid
    Muud metalli töötluspingid
    Tarvikud metallitööpinkidele
    Lauakäiad
    Teritusmasinad
    Varuosad metallitööpinkidele
    Keevitusseadmed
    Tarvikud elektritööriistadele ja tööpinkidele
     
    Elektritööriistade lisad
    Visplid
    Traatharjad ja nailonharjad
    Joodised ja jootekolvi otsikud
    Keermestustarvikud
    Gaasipadrunid
    Lõike- ja lihvimiskettad
    Puurid ja freesid
    Saekettad ja -terad
    Treiterad
    Meislid ja piigid
    Augusaed ja juhtpuurid
    Lihvpaberid
    Otsikud ja otsikuhoidjad
    DREMEL tarvikud
    Keevitusmaterjalid ja -tarvikud
    Tarvikud gaasi- ja jootetööriistadele
    Generaatorid
    Käsitööriistad
    Käsitööriistad
    Käsitööriistad ja komplektid
     
    Kangid ja heeblid
    Lõikurid
    Käsisaed
    Klambripüstolid ja klambrid
    Kruustangid ja pitskruvid
    Kruvikeerajad
    Meislid, tornid ja peitlid
    Käsihöövlid
    Magnetid ja magnetiseerijad
    Needi-ja neetmutritangid
    Padrunid, narred, pikendused, kardaanid
    Tööriistade komplektid
    Tangid ja näpitsad
    Poldi väljakeeramise komplektid
    Varuosad käsitööriistadele
    Haamrid ja kuvaldad
    Võtmed
    Viilid, rasplid, luisud
    Käsitraatharjad
    Iminapad
    Noad ja noaterad
    Torutööriistad
     
    Kontrollseadmed
    Puhastusseadmed
    Varuosad torutööriistadele
    Muud torutööriistad
    Keermestustööriistad
    Pressid ja pihid
    Torupainutajad
    Survestuspumbad
    Puurmasinad ja freesid
    Gaasi- ja jootetööriistad
     
    Jootekolvid
    Põletid
    Gaasid
    Gaasijootekolvid
    Plekksepa tööriistad
     
    Valtsirauad ja -rullid
    Valtstangid
    Märke- ja mõõteriistad
    Märke- ja mõõteriistad
    Mõõteriistad
     
    Loendurid ja kellad
    Mõõdulindid ja mõõterattad
    Kaliibrid ja kontrollplaadid
    Loodid ja rihtlatid
    Mõõteseadmed
    Mikromeetrid ja suplerid
    Nurgamõõtjad
    Sirklid
    Testrid ja pingeindikaatorid
    Varuosad märke- ja mõõteriistadele
    Märkevahendid
     
    Märkevärvid
    Märkenöörid ja -pulbrid
    Märkenõelad
    Pliiatsid, markerid, kriidid
    Ehitus ja viimistlus
    Ehitus ja viimistlus
    Ehitusmasinad ja seadmed
     
    Betooniseadmed
    Õhukuivatid ja kütteseadmed
    Segumasinad
    Tarvikud ja varuosad ehitusseadmetele
    Kipsplaaditõstukid
    Maalritarbed
     
    Pintslid
    Käepidemed ja teleskoopvarred
    Värvivannid ja -ämbrid
    Pahtlilabidad ja kaabitsad
    Lihvimistarbed
    Kaitsekiled
    Värvirullid
    Redelid ja tellingud
    Plaatimistarbed
     
    Plaadilõikurid
    Plaadiristid ja -kiilud
    Vuugikaabitsad
    Vuugikummid ja käsnad
    Müürimistööriistad
     
    Segunõud ja ämbrid
    Segukammid ja kellud
    Müürinöörid
    Ehitusmaterjalid
     
    Ehituskiled
    Metallkarkassid, kinnitused
    Hiireliistud ja linnutõke
    Tihenduslindid
    Ehituskeemia
     
    Keemiline ankur ja -mass
    Montaaživahud
    Silikoonid
    Akrüülhermeetikud
    Spetsiaalhermeetikud
    Montaažiliimid
    Katusehermeetikud
    Liimid
    Pinnatöötlusvahendid
    Betoonilisandid
    Püstolid
    Aerosoolvärvid ja krundid
    Puhastamine
    Teibid
     
    Teibid ehituskiledele
    Maalriteibid
    Niiskuskindlad teibid
    Alumiiniumteibid
    Muud teibid
    Aia- ja metsatehnika
    Aia- ja metsatehnika
    Aiatehnika
     
    Heki ja -murukäärid
    Lehepuhurid
    Oksapurustajad
    Muruniidukid
    Oksasaed ja -käärid
    Murutrimmerid
    Veepumbad
    Varuosad ja tarvikud aiatehnikale
    Metsatehnika
     
    Kettsaed
    Puulõhkumismasinad
    Tarvikud metsatehnikale
    Võsalõikurid
    Aiatööriistad
     
    Kirved ja -varred
    Labidad, rehad, hargid
    Aiakärud
    Aiakaubad
    Kastmisvahendid
    Aiakäärid ja -saed
    Kodukaubad ja koristusseadmed
    Kodukaubad ja koristusseadmed
    Kodukaubad
     
    Termomeetrid
    Patareid
    Lukud
    Muud kodukaubad
    Prügikotid
    Harjad ja kühvlid
    Riiulid
    Kodukeemia
    Kätepaberid
    Matkagrillid
    Kattematerjalid
     
    Pakkekiled ja kattepaberid
    Puhastus- ja koristusseadmed
     
    Tolmuimejad
    Survepesurid ja tarvikud
    Muud puhastusseadmed
    Tarvikud puhastustehnikale
    Lume koristamiseks
    Tekstiilipesurid
    Aurupesurid
    Aknapesurid
    Põrandapesumasinad
    Kuivpühkimismasinad
    Õhupuhastid
    Puhastus- ja hooldusvahendid
    Matkatarbed
    Garaažitehnika ja autotarvikud
    Garaažitehnika ja autotarvikud
    Auto spetstööriistad
     
    Tõmmitsad
    Rattavõtmed
    Õlifiltrivõtmed
    Pidurite remontimise komplektid
    Polstri- ja liistude eemaldamise komplektid
    Anduri võtmed
    Kompressiooni-testerid
    Kontrollpeeglid
    Teised auto spetstööriistad
    Küünlavõtmed ja -padrunid
    Tööriistakastid, -kärud ja töölauad
     
    Tööriistakastid ja -kotid
    Tööriistakärud ja -sisud
    Universaalsed kärud
    Töölauad ja stendid
    Garaažiseadmed
     
    Autokere taastamisseadmed
    Tungrauad ja pukid
    Õlivahetus -ja määrdeseadmed
    Garaažitõstukid
    Telfrid, talid, vintsid
    Hüdropressid
    Muud garaaži tarvikud
    Määrdeained ja autokeemia
     
    Autokeemia
    Õlid ja määrded
    Korrosiooni-tõrjevahendid
    Tööstusmäärdeained
    Transporditarvikud
     
    Koormakatted
    Koormarihmad
    Lehtrid, kannud ja kanistrid
    Suruõhutehnika
     
    Kompressorid
    Suruõhu-tööriistad
    Varuosad suruõhu-tehnikale
    Suruõhutarvikud
     
    Suruõhuvoolikud
    Suruõhu kiirliiteühendused
    Suruõhu jagajad
    Muud tarvikud suruõhutööriistadele
    Poleerimisvahendid
     
    Poleerimine ja lihvimine
    Poleerimispastad
    Auto hädaabitarvikud
     
    Akulaadijad, testrid, käivituskaablid
    Veoköied
    Ohutus- ja töökaitsevahendid
    Ohutus- ja töökaitsevahendid
    Esmaabivahendid
    Isikukaitsevahendid
     
    Kaitseprillid
    Põlvekaitsmed
    Kuulmiskaitse
    Hingamiskaitsed
    Kukkumiskaitsmed
    Peakaitsevahendid
    Tööriided
     
    T-särgid ja pluusid
    Pusad, fliisid ja vestid
    Tööjoped
    Tööpüksid
    Kombinesoonid
    Mütsid
    Vööd ja kabuurid
    Põlled ja kaitsmed
    Sokid
    Aluspesu
    Jalatsid
     
    Turvakingad
    Turvasandaalid
    Saapad
    Sisetallad
    Kindad
    Ohuteibid
    Sildid
    Elektritarvikud ja valgustid
    Elektritarvikud ja valgustid
    Lambid ja prožektorid
     
    Tasku- ja pealambid
    Prožektorid
    Pirnid
    Muud lambid
    Pikendus- ja jätkujuhtmed
    Vooluvõtukeskused
    Pistikud
    Kaablisidemed
    Kilbivõtmed
    Juhtmeotsahülsid
    BOSCH
    BOSCH
    Bosch akud
    Bosch akutrimmerid
    Bosch saed
    Bosch laserid
    KÄRCHER
    KÄRCHER
    Kärcher aknapesurobotid
    Kärcher tolmu- ja veeimejad
     
    Kärcher WD 3 tolmuimejad
    Robottolmuimejad ja põrandapesurobotid
    Kärcher survepesurid
     
    Kärcher K7 survepesurid ja tarvikud
    Kärcher K5 survepesurid ja tarvikud
    Kärcher aurupesurid
    Kärcher tekstiilipesurid
    Kärcher aknapesurid
    Kärcher põrandapesumasinad
    Kärcher varuosad ja muu
    Muud Kärcheri mudelid
    Update cookies preferences