Garaažitehnika ja autotarvikud

• Hot-dip galvanised inside and outside with fifteen-year warranty against rusting through
• Built according to EC Directive 87/404/EEC or DGRL 97/23/EC -AD 2000, module: H / H 1

• Thanks to patented technology, regular service is possible in only 30 seconds and without expensive cleaning
• Wall and floor mounting possible
• Works reliably with any steam trap
• Suitable for all common compressor oils
• Operating media: condensate (air, water, oil), non-aggressive, not suitable for emulsion
• Quick and clean change of the filter cartridge
• No settling tank necessary (no bacteria formation)
• Easy installation due to compact design and small dimensions
• Connection via quick couplings

• Multi-stage oil-water separation via an oil-attracting filter and activated carbon
• After the end of the service life of the filter element this is unscrewed and disposed of completely
• Filter element is tightly closed with plastic cover, so that residual condensate can remain in it
• Locked filter element can be disposed of according to current regulations

• after occurrence of one of the following three cases:
• 4,000 operating hours of the compressor at compressor oil transfer of 2.5 mg / m3
• Discoloration of the polypropylene medium - analysis by simple visual inspection
• At the latest after 12 months (regardless of the operating hours of the compressor)

• Ideal in combination with prefabricated solutions
• Permanently sealed without pressing
• Installation even in confined spaces
• Detachable fittings can be reused
• Cost savings through quick assembly

• Permanently sealed without pressing
• Cost savings through quick and easy assembly
• Ideal in combination with prefabricated solutions
• Compatible with other standards-compliant pipes
• No confusion of contours possible
• Installation even in confined spaces
• Extraction forces far beyond the requirements of the standard
• Pipe components can be dismantled and reused
• Numerous national and international approvals
• O-rings included

• Easy and simple installation
• Installation times can be reduced by up to 40%
• Suitable for copper and plastic pipes
• Ideal for tight installation conditions a flexible pipe system
• disassembly possible without damaging the pipe connector
• multiple loosening and plugging possible
• secure and tight connection without constant inspection

Tehnilised andmed:

• Imivõime: 650 l/min
• Tootlikkus: 520 l/min (6 bar juures)
• Maksimaalne töörõhk: 10 bar
• Õhumahuti maht: 2 × 100 l (kokku 200 l)
• Mootori võimsus: 4,0 kW
• Toitepinge: 400 V / 50 Hz
• Kompressori pöörlemiskiirus: 950 p/min
• Silindreid: 2
• Surveastmeid: 2
• Müratase: 83 dB(A)
• Kaal: 235 kg

• Ideal in combination with prefabricated solutions
• Permanently sealed without pressing
• Installation even in confined spaces
• Detachable fittings can be reused
• Cost savings through quick assembly

• Permanently sealed without pressing
• Cost savings through quick and easy assembly
• Ideal in combination with prefabricated solutions
• Compatible with other standards-compliant pipes
• No confusion of contours possible
• Installation even in confined spaces
• Extraction forces far beyond the requirements of the standard
• Pipe components can be dismantled and reused
• Numerous national and international approvals
• O-rings included

• To mount one or more interconnected filters on the wall

• 99% separation of the precipitated condensate directly after the compressor
• For separating large amounts of condensate (water, oil) and dirt particles by centrifugal acceleration of the compressed air
• Use on aftercoolers and refrigeration dryers
• High quality corrosion protection through complete anodization
• Low-flow housing made of seawater-resistant aluminum
• Outside additionally powder-coated
• Differential pressure < 0.06 bar
• With BEKOMAT® steam trap

Aircraft ACS 3,5-10-200 kruvikompressor on varustatud 200-liitrise mahuti, 4 kW mootori ja 10-barise töörõhuga. Tootlikkus kuni 380 l/min tagab stabiilse suruõhuvarustuse töökodades ja tootmisettevõtetes.

Tehnilised andmed:

• Kompressori tüüp: õliga määritud kruvikompressor
• Paigaldusviis: statsionaarne
• Mootori võimsus: 4,0 kW
• Mootori sisendvõimsus: 4,24 kW
• Toitepinge: 400 V
• Faaside arv: 3
• Võrgusagedus: 50 Hz
• Maksimaalne töörõhk: 10 bar
• Efektiivne õhutootlikkus: umbes 380 l/min
• Spetsiifiline võimsus: 13,36 kW/(l/min)
• Mahuti maht: 200 l
• Õhu väljavõte: 1/2"
• Suruõhu väljavõtt: 3/4" kuulkraan
• Kaitse: 12 A
• Voolutarve: 8,5 A
• Mootori pöörlemiskiirus: 2880 p/min
• Kaitseklass: IP54
• Töörežiim: S1 pidevtöö
• Mõõtmed (P × L × K): 1180 × 680 × 1090 mm
• Kaal: umbes 122 kg
• Müratase: 69 dB(A)
• Juhtimine: elektrooniline K‑Tronic juhtsüsteem
• Õli-soojusvaheti: jah
• Õlisoojendus: jah
• Suruõhu ettevalmistus: õlieralduskassett
• Mahuti: seest ja väljast kuumtsingitud, AD 2000 standardile vastav

Komplekti sisu:

• Aircraft ACS 3,5-10-200 kruvikompressor
• 200-liitrine kuumtsingitud suruõhumahuti
• Integreeritud K‑Tronic elektrooniline juhtimissüsteem
• Õlieraldussüsteem
• Hooldusvaba otseajamiga kompressoriplokk
• Õli-soojusvaheti
• Ühendusarmatuurid ja õhuväljavõtuventiilid
• Toitekaabel koos faasimuunduriga pistikus
• Kasutus- ja hooldusjuhend

• Maintenance-free direct drive
• Low space requirements and energy costs
• Low noise level
• Generously dimensioned cooler
• Easy installation and accessibility of all maintenance positions

Coaxial screw-type compressor with maintenance-free drive and maximum energy efficiency in all pressure ranges. Low compressor speeds and low load on the bearings of the patented direct drive ensure a very long service life.

• Prevents motor overload, reduces wear and makes for a longer service life
• Monitoring of operating hours, temperature and motor overload
• Phase sequence relays control the direction of rotation of the motor, thereby avoiding possible damage during commissioning or after relocation

• Low-noise centrifugal fan guarantees optimal operating temperatures even under unfavourable conditions
• Thermostatically and electronically controlled fan and generously sized heat exchanger result in a longer service life and less fluctuation in oil temperature

• Low noise, suitable for deployment in any work environment
• Small footprint facilitates transport and deployment
• Service-friendly thanks to optimum accessibility and easy removal and installation of all components that require maintenance
• All air and oil lines are made of heat-resistant rubber
• Equipped with a star delta circuitry as factory standard
• Ready to connect with all fittings and safety equipment

• More reliable compressed air system without costly downtimes and production delays while simultaneously ensuring product quality
• Fully integrated into the housing
• Ready for use without installation overhead
• Equipped with control panel and time-controlled condensate drain

AIRPROFI 853/200/10 H on professionaalne statsionaarne kolbkompressor 200-liitrise mahuti ja 10-barise töörõhuga. Imemisvõimsus 850 l/min ning tootlikkus 680 l/min tagavad stabiilse suruõhuvarustuse töökodades, tootmisettevõtetes ja hooldustöödel. Kaheastmeline kompressoriplokk ning kuumtsingitud survemahuti tagavad töökindluse ja pika kasutusea.

Tehnilised andmed:

• Toote tüüp: statsionaarne kolbkompressor
• Mahuti maht: 200 l
• Imemisvõimsus: 850 l/min
• Efektiivne tootlikkus: 680 l/min (6 bar töörõhu juures)
• Maksimaalne töörõhk: 10 bar
• Mootori võimsus: 5,5 kW
• Sisendvõimsus: 6,5 kW
• Toitepinge: 400 V / 50 Hz
• Silindrite arv: 2
• Surveastmete arv: 2
• Kompressori pöörlemiskiirus: 1240 p/min
• Müratase: 83 dB(A)
• Õhu väljavõte: ¾"
• Mõõdud (P × L × K): 1150 × 500 × 1150 mm
• Kaal: 122 kg
• Mahuti viimistlus: seest ja väljast kuumtsingitud

A-PLUS 38-10 K VS on sagedusmuunduriga kruvikompressor integreeritud külmkuivatiga. Tootlikkus 2050-5200 l/min, maksimaalne töörõhk 10 bar ning energiasäästlik töökindel lahendus professionaalsetele suruõhusüsteemidele.

Tehnilised andmed:

• Kompressori tüüp: õliga määritud sagedusmuunduriga kruvikompressor
• Paigaldusviis: statsionaarne
• Integreeritud külmkuivati: jah
• Mootori võimsus: 37 kW
• Mootori efektiivsusklass: IE3
• Efektiivne õhutootlikkus: 2050-5200 l/min
• Maksimaalne töörõhk: 10 bar
• Õhu väljavõte: 1¼"
• Õlikogus: 15 l
• Ülekanne: soonrihmülekanne 
• Juhtsüsteem: NRG elektrooniline mikroprotsessorjuhtimine
• Müratase: 72 dB(A)
• Mõõtmed (P × L × K): 1860 × 830 × 1440 mm
• Netokaal: 805 kg

Komplekti sisu:

• Aircraft A-PLUS 38-10 K VS kruvikompressor
• Integreeritud külmkuivati
• Sagedusmuunduriga juhtimissüsteem
• NRG mikroprotsessorjuhtimine
• Soonrihmülekandega ajamisüsteem
• Temperatuurjuhtimisega tsentrifugaalventilaator
• Suure jõudlusega kombijahuti
• Helisummutatud korpus
• Kasutus- ja hooldusdokumentatsioon

• Compressed air tank according to AD 2000 / without fitting set / 11 and 16 bar
• Hot dip galvanized inside and outside
• Constructed in accordance with EC Directive 87/404 / EEC or PED 97/23 / EC -AD 2000, Module: H / H 1
• Operating conditions according to AD 2000 - S1 (10/2000) = arrivals and departures and 20% pressure fluctuation range
• ISO 9001:2015 certified manufacturer

• Two-cylinder high-performance units made of gray cast iron for a long service life
• Aftercooler with cooling fins ensures a low tank inlet temperature and thus less moisture in the compressed air
• Ten-year guarantee against rusting through on powder-coated compressed air tanks

• Two-cylinder high-performance units made of gray cast iron for a long service life
• Large fan wheel and a cooling air baffle on the cylinder for optimum cooling of the compressor
• Quality electric motor with high starting torque
• Electric motor equipped with motor protection switch
• Aftercooler with cooling fins ensures a low tank inlet temperature and thus less moisture in the compressed air
• Sturdy metal belt guard
• 400 volt models with phase inverter as standard for easy manual reversal of the direction of rotation
• Compressed air tank equipped with safety valve, tank pressure gauge and condensate drain valve
• Including all safety devices
• Completely ready for connection
• Filter pressure regulator with one pressure gauge for regulated compressed air cleaned of condensate, dirt and oil, second pressure gauge for tank pressure
• Ten-year guarantee against rusting through on powder-coated compressed air tanks
• Includes high-quality one composite safety coupling and high-quality CONDOR pressure switch
• Flexible armored hose line with heat protection for long service life without vibration breakage
• Ergonomic handle, rubber handle and transport handle on the compressed air tank for convenient transportation
• Sturdy steering chassis with parking brake in combination with large, puncture-proof wheels for comfortable transportation